Optoma TH1020 User's Manual
Optoma TH1020 Manual
 |
UPC - 796435411510
View all Optoma TH1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma TH1020 manual content summary:
- Optoma TH1020 | User's Manual - Page 1
...29 Setup...32 Options...40 Appendices 43 Troubleshooting 43 Projector Status Indication 46 Remote Control 47 Replacing the Lamp 48 Compatibility Modes 50 RS232 Commands and Protocol Function List 52 Ceiling Mount Installation 56 Optoma Global Offices 57 Regulation & Safety notices 59 - Optoma TH1020 | User's Manual - Page 2
to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma TH1020 | User's Manual - Page 3
- Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow the unit to cool down. Follow instructions as described on pages 48-49. ▀■ Warning- This projector will detect the life of the lamp itself. Please be sure to change - Optoma TH1020 | User's Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma TH1020 | User's Manual - Page 5
on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Monitor loop through only support in VGA-IN. Product Features ▀■ 1920 x 1080 Native Resolution ▀■ Full HD compatible - 1080p supported ▀■ VGA monitor loop through (works on standby mode - Optoma TH1020 | User's Manual - Page 6
. ? POWER Projector with lens cap Power Cord .8m VGA Cable .8m /? Due to different applications in each Country, some regions may have different accessories. 2 × AAA Batteries Documentation : User's Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) IR Remote Control - Optoma TH1020 | User's Manual - Page 7
Introduction Product Overview Main Unit 2 3 5 ? POWER 5 4 6 9 USB VGA-OUT ? POWER SCAVRGTA/ -YINPbPr / HDMI S-VIDEO AUDIO-OUT RS-232 12V OUT VIDEO AU(VDGIOA-)IN (SA-VUIDDEIOO-/VINID-ELO) (SA-VUIDDEIOO/V-IINDE-RO) 8 7 6 . Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens - Optoma TH1020 | User's Manual - Page 8
Introduction Control Panel 2 2 3 45 6 ? POWER 7 8 9 0 . Help 2. Menu 3. Source 4. Enter 5. Re-Sync 6. Power 7. Keystone Correction 8. Four Directional Select Keys 9. On/Standby LED 0. Lamp Fail LED . Temp LED 2. IR Receiver English 8 - Optoma TH1020 | User's Manual - Page 9
HDMI S-VIDEO VIDEO (VGA) (S-VIDEO/VIDEO) (S-VIDEO/VIDEO) AUDIO-IN AUDIO-IN-L AUDIO-IN-R 0 3 4 2 . USB Connector (Connect to PC for Remote Mouse function) 2. VGA-Out Connector (Monitor Loop-through Output from VGA-In) 3. VGA-In/YPbPr/" " Connector (PC Analog Signal/Component Video - Optoma TH1020 | User's Manual - Page 10
Introduction Remote Control 2 24 22 3 2 4 20 5 9 /? 6 8 7 7 8 6 9 5 0 4 English 0 23 3 2 . LED Indicator 2. Power On/Off 3. Page Up 4. Mouse Right Click 5. Four Directional Select Keys 6. Re-Sync 7. Page Down 8. Volume +/9. - Optoma TH1020 | User's Manual - Page 11
Installation Connecting the Projector Connect to Computer/Notebook 7 MOLEX 5 2 3 4 6 I/O configuration depends on models. Due to the difference in applications for each country, some regions may have different accessories. (*) Optional - Optoma TH1020 | User's Manual - Page 12
Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver S-Video Output Composite Video Output 7 3 2 I/O configuration depends on models Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory - Optoma TH1020 | User's Manual - Page 13
cord and signal cable. When connected, the ON/STANDBY LED will turn Amber. 3. Turn on the lamp by pressing " " button either on the top of (*) When Power mode (Standby) is set to Eco., the projector or on the remote. The ON/STANDBY LED will now turn Green. The startup screen will display in - Optoma TH1020 | User's Manual - Page 14
off the projector 1. Press the " " button on the remote control or on the control panel to turn off the projector. The projector will automatically shutdown: Contact the nearest service center if the "LAMP" LED indicator is lit red and if "On/Standby" indicator flashes amber. projector - Optoma TH1020 | User's Manual - Page 15
for adjusting the image height. . Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring counter clockwise to raise the projector or clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma TH1020 | User's Manual - Page 16
Projector ) 301.2" (764.9cm) 251.0" (637.4cm) Hd 4.92'(1.50m) 8.20'(2.50m) 10.66'(3.25m) 16 x 123.0" (WxH) 83.3 x 46.9cm 138.9 x 78.1cm 180.5 x 101.5cm 277.7 x 156.2cm 444.5 x 250.0cm 555.6 x 312.5cm Max. (29.99cm) 18.90" (48.01cm) 23.62" (60.00cm) Hd Min. 2.95" (7.50cm) 4.92" (12.50cm) 6.40" (16. - Optoma TH1020 | User's Manual - Page 17
User Controls Control Panel & Remote Control Control Panel ? POWER Using the Control Panel Power Refer to the "Power On/Off the Projector" section on pages 3-4. RE-SYNC Automatically synchronize the projector to the input source. Enter Confirm your item selection. SOURCE Press "SOURCE" - Optoma TH1020 | User's Manual - Page 18
User Controls Remote Control Using the Remote Control Power Refer to the "Power On/Off the Projector" section on pages 3-4. Laser Press Re-SYNC Four Directional Select Keys Keystone +/- Automatically synchronizes the projector to the input source. Use to select items or make adjustments - Optoma TH1020 | User's Manual - Page 19
User Controls Remote Control Using the Remote Control HDMI Press "HDMI" to choose HDMI source. Freeze Press "Freeze" to pause the screen image. Press this button again to unlock. AV mute Momentarily - Optoma TH1020 | User's Manual - Page 20
? POWER User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the control panel to open the Help Menu. ? English 20 - Optoma TH1020 | User's Manual - Page 21
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 43-46 for more details. . 2 English - Optoma TH1020 | User's Manual - Page 22
User Controls If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 22 - Optoma TH1020 | User's Manual - Page 23
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate . To open the OSD menu, press "Menu" on the Remote Control or - Optoma TH1020 | User's Manual - Page 24
User Controls Menu Tree (#) "Saturation" # # and "Tint" are only supported in Video mode. (*) "Signal" is only supported in Analog VGA (RGB) signal. (**) "IRE" is only supported in NTSC signal. * RGB Video English 24 - Optoma TH1020 | User's Manual - Page 25
. Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). Classroom: This mode is recommended for projecting in a classroom. User: User's settings. User2: The initial default settings of this mode is from Movie mode. Any further - Optoma TH1020 | User's Manual - Page 26
User Controls IMAGE Contrast The contrast controls the degree of difference between sharpness. "Saturation" and "Tint" functions are only supported under Video mode. Saturation Adjust a video image from black and white to fully saturated color. Press the to decrease the amount of saturation in - Optoma TH1020 | User's Manual - Page 27
User Controls IMAGE | Advanced Noise Reduction The motion Adaptive Noise Reduction or TV source. Graphics: for image source. Standard: for standardized setting. Color Temp. Adjust the color temperature. With cold temperature, the screen looks colder; with warm temperature, the screen looks - Optoma TH1020 | User's Manual - Page 28
return the factory default settings for color adjustments. Advanced | Input Source Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press "Enter" to finalize the selection. The projector will not search for inputs that - Optoma TH1020 | User's Manual - Page 29
16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. LBX: This format is for non-16x9, letterbox source and for users who use external anamorphic lens to display 2.35:1 aspect ratio using full resolution. Native: This format displays the original image without any scaling. AUTO - Optoma TH1020 | User's Manual - Page 30
User Controls Detail informations about LBX mode : 1. Some Letter-Box DVDs are not Anamorphic DVD and HDTV film source) that support anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Lamp power and vertical resolution are fully utilized. - Optoma TH1020 | User's Manual - Page 31
User Controls DISPLAY Zoom Press the Press the to reduce the size of an image. to magnify an image on the projection screen. Overscan Overscan function - Optoma TH1020 | User's Manual - Page 32
User Controls SETUP | Language Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press "Enter" to finalize the selection. English 32 - Optoma TH1020 | User's Manual - Page 33
turn upside down. Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to - Optoma TH1020 | User's Manual - Page 34
User Controls SETUP "Wireless" is only functional with VGA connector Warning: Wired VGA will not function and the projector maybe shut down if off. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (VGA, or S-VIDEO - Optoma TH1020 | User's Manual - Page 35
User Controls SETUP | Security Security On: Choose "On" to use security verification when the turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Timer-Month/Day/Hour Use this function to set the how long (Month/Day/Hour) the projector - Optoma TH1020 | User's Manual - Page 36
Enter new password (4 digits in length) using the number buttons on the remote, then press " " to confirm. 4. Enter new password again and press " " to confirm. If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please - Optoma TH1020 | User's Manual - Page 37
User Controls SETUP | Signal - RGB Source "Signal" is not supported when the source is HDMI or DVI-D. Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be - Optoma TH1020 | User's Manual - Page 38
/ CVBS signals. "IRE" is only supported in NTSC signal. Black Level Allow user adjust Black Level when inputting S-Video or Video/ CVBS signals. Saturation Adjust a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to - Optoma TH1020 | User's Manual - Page 39
Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. User: Use stored picture from "Logo Capture" function. Logo Capture Press " " to capture an image of the picture currently - Optoma TH1020 | User's Manual - Page 40
the control panel will be locked however, the projector can be operated by the remote control. By selecting "Off", you will be Color Use this feature to display a "Black", "Red", "Blue", "Green" or "White", screen when no signal is available. "12V OUT" is activated when the 12V Trigger projector - Optoma TH1020 | User's Manual - Page 41
standby. Direct Power On Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the " " key on the projector control panel or on the remote control. Auto Power Off (min) Sets the countdown timer interval. The countdown timer - Optoma TH1020 | User's Manual - Page 42
30 hours before suggested replacement of lamp. Brightness Mode STD: Choose "STD" to dim the projector lamp which will lower power consumption and extend the lamp life. BRIGHT: Choose "BRIGHT" to increase the brightness. Lamp Reset Reset the lamp hour counter after replacing the lamp. English 42 - Optoma TH1020 | User's Manual - Page 43
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma TH1020 | User's Manual - Page 44
your notebook manufacturer to send signal out from notebook to projector. Example: [Fn]+[F4] Acer [Fn]+[F5 to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or for more information. Change the monitor color setting on your computer. Image has vertical - Optoma TH1020 | User's Manual - Page 45
player. Image is too small or too large Adjust the Zoom Ring on the top of the projector. Move the projector closer to or further from the screen. Press "Menu" button on the remote control or projector panel, go to "Display Format" and try the different settings. Image has slanted sides If - Optoma TH1020 | User's Manual - Page 46
control the projector with the remote control. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the - Optoma TH1020 | User's Manual - Page 47
and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are exhausted. 47 English - Optoma TH1020 | User's Manual - Page 48
or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety glasses if changing the bulb - Optoma TH1020 | User's Manual - Page 49
the two screws on the lamp module. 3 7. Lift up the lamp handle and remove the lamp module slowly and carefully. 4 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "Menu" (ii) Select - Optoma TH1020 | User's Manual - Page 50
SXGA+ UXGA Power Book G4 SVGA XGA For widescreen WXGA resolution (WXGA), the compatibility HD support is dependent on Notebook/PC models. SXGA+ UXGA iMAC XGA Resolution 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 - Optoma TH1020 | User's Manual - Page 51
Appendices Video Compatibility NTSC M (3.58MHz), 4.43 MHz PAL B, D, G, H, I, M, N SECAM B, D, G, K, K1, L SDTV/HDTV 480i/p, 576i/p, 720p@50Hz/60Hz, 1080i/p@50Hz/60Hz 51 English - Optoma TH1020 | User's Manual - Page 52
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 3 2 1 Pin no. Name TXD 2 RXD 3 GND I/O (From Projector Side) OUT IN GND 9876 54321 Pin no. 2 3 4 5 6 7 8 9 Spec. (from projector side) N/A RXD TXD N/A GND N/A N/A N/A N/A English 52 - Optoma TH1020 | User's Manual - Page 53
Rate : 9600 Note : There is a after all ASCII commands Data Bits: 8 0D is the HEX code for in ASCII code Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector n 7E 30 30 32 34 20 a 0D Color Settings Red Gain n = -50 (a=2D 35 - Optoma TH1020 | User's Manual - Page 54
Front-Ceiling ~XX71 4 7E 30 30 37 31 20 34 0D Rear-Ceiling ~XX72 XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a= 32 20 31 0D Logo Optoma ~XX82 2 7E 30 30 38 32 20 32 0D User ~XX83 1 7E 30 30 30 31 30 34 20 31 0D Background Color Blue ~XX104 2 7E 30 30 31 30 - Optoma TH1020 | User's Manual - Page 55
16:9/LBX/Native/AUTO ~XX128 1 7E 30 30 31 32 38 20 31 0D Color Temperature OKn n : 0/1/2 = Warm/Medium/Cold ~XX129 1 7E 30 30 31 32 39 20 31 0D Projection Mode OKn n : 0/1/2/3 = Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-Ceiling ~XX150 1 7E 30 30 31 35 30 20 31 0D Information ~XX151 - Optoma TH1020 | User's Manual - Page 56
will invalidate the warranty. . To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M3*3 Maximum screw - Optoma TH1020 | User's Manual - Page 57
Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Milpitas, CA 95035, USA www.optomausa.com Tel : 408-383-3700 Fax: 408-383-3702 Service : [email protected] Canada 5630 Kennedy Road, Mississauga, Tel : 905-361-2582 ON, L4Z 2A9, Canada Fax: 905-361 - Optoma TH1020 | User's Manual - Page 58
Kong E-mail : [email protected] www.os-worldwide.com Tel : +886-2-2218-2360 Fax: +886-2-2218-2313 Service : [email protected] asia.optoma.com Tel : +852-2396-8968 Fax: +852-2370-1222 www.optoma.com.hk China 5F, No. 1205, Kaixuan Rd., Changning District Shanghai, 200052, China Tel : +86-21 - Optoma TH1020 | User's Manual - Page 59
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this projector. 59 English - Optoma TH1020 | User's Manual - Page 60
undesired operation. Notice: Canadian users This Class B digital apparatus classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Directive 2004 999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
±
English
Table of Contents
...................................................................................
±
Usage Notice
..........................................................................................
2
Safety Information
.........................................................................................
2
Precautions
....................................................................................................
3
Eye Safety Warnings
.....................................................................................
5
Product Features
...........................................................................................
5
Introduction
.............................................................................................
6
Package Overview
.........................................................................................
6
Product Overview
..........................................................................................
7
Main Unit
................................................................................................................
7
Control Panel
.........................................................................................................
8
Input / Output Connections
....................................................................................
9
Remote Control
....................................................................................................
±0
Installation
............................................................................................
±±
Connecting the Projector
.............................................................................
±±
Connect to Computer/Notebook
..........................................................................
±±
Connect to Video Sources
...................................................................................
±2
Powering the projector On / Off
...................................................................
±3
Powering On the Projector
...................................................................................
±3
Powering Off the projector
...................................................................................
±4
Warning Indicator
.................................................................................................
±4
Adjusting the Projected Image
.....................................................................
±5
Adjusting the Projector’s Height
...........................................................................
±5
Adjusting the Projector’s Zoom / Focus
...............................................................
±6
Adjusting Projected Image Size
...........................................................................
±6
User Controls
.......................................................................................
±7
Control Panel & Remote Control
.................................................................
±7
Control Panel
.......................................................................................................
±7
Remote Control
....................................................................................................
±8
Using the HELP button
........................................................................................
20
On-screen Display Menus
...........................................................................
23
How to operate
....................................................................................................
23
Menu Tree
............................................................................................................
24
Image
...................................................................................................................
25
Display
.................................................................................................................
29
Setup
....................................................................................................................
32
Options
.................................................................................................................
40
Appendices
...........................................................................................
43
Troubleshooting
...........................................................................................
43
Projector Status Indication
..........................................................................
46
Remote Control
...........................................................................................
47
Replacing the Lamp
.....................................................................................
48
Compatibility Modes
....................................................................................
50
RS232 Commands and Protocol Function List
............................................
52
Ceiling Mount Installation
............................................................................
56
Optoma Global Offices
................................................................................
57
Regulation & Safety notices
........................................................................
59
Table of Contents