Panasonic A-44-IR-V2 A-44-IR-V2 AE Spec Sheet

A&E SPECIFICATION

Advidia A-44-IR-V2 2 MP NETWORK DOME CAMERA

TECHNICAL SPECIFICATIONS

SECURITY SYSTEM

PART 2 - PRODUCTS

2.1

GENERAL

A.

This product shall be manufactured by a firm whose quality system is in compliance with the

ISO-9001

B.

All equipment and materials used shall be standard components that are regularly

manufactured and used in the manufacturer’s system.

C.

All systems and components shall have been thoroughly tested and proven in actual use.

D.

All systems and components shall be provided with comprehensive repair and spare parts

replacement. The manufacturer on warranty and non-warranty items shall guarantee the

spare parts and the repair.

E.

All systems and components shall have been thoroughly tested and proven in actual use.

F.

All systems and components must be in compliance with FCC, CE, UL and RoHS

requirements.

G.

All materials furnished under this item shall be compliant with 802.3 Ethernet standards

2.2

2MP NETWORK DOME CAMERA

A.

The network camera shall offer three video streams with up to 2MP resolution (1920 x 1080) in

progressive scan CMOS format, with H.264 video compression.

B.

The network camera shall be provided with a DC Iris, vari-focal lens with 2.8-9.0mm with

motorized zoom and focus for remote setting over the network.

C.

The network camera shall provide true & day night (ICR) low-light capabilities with sensitivity

down to 0.014Lux @F1.4,AGC ON, 0 Lux with IR

D.

The network camera shall support Back-Light Compensation (BLC) with selectable zones.

E.

The network camera shall offer video compression of H.264 and MPEG-4. Three H.264

streams shall be supported with independent resolution, bit rate and frame rates for the main,

sub and third streams.

F.

The network camera shall support video motion detection with user defined areas and

configurable sensitivity levels. In addition, the motion detection shall be supported by an

arming schedule with the audible warning, surveillance center notification, email, and alarm

output triggered as supported events.

G.

The network camera shall support smart features including intrusion zones, transverse plane

(tripwire), facial detection, out of focus detection, out of position (tampering) detection and

audio level detection. The smart function shall all be supported simultaneously without

degrading camera performance.

H.

The network camera shall include embedded Linux OS and support IE and client software for

network preview, and be capable of performing firmware upgrades through a network using a

software-based device utility or through the web interface.

I.

The network camera shall be equipped with built-in password protection which is not

dependent on a server.