Panasonic A-55 A-55 Quick Installation Guide
Panasonic A-55 Manual
 |
View all Panasonic A-55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic A-55 manual content summary:
- Panasonic A-55 | A-55 Quick Installation Guide - Page 1
Package Contents: • Camera • Mounting Accessories • Power Adapter (optional) • Quick Installation Guide II. Required Equipment Before Installation • PC + Monitor • RJ-45 Network cable (1 for each device + 1 for PC) • Network Switch • Power Adapter with Terminal Block (Optional) (PoE - Panasonic A-55 | A-55 Quick Installation Guide - Page 2
V. Accessing Your Camera- Manual IP Setup (Without Router/DHCP server) 1. Connect the PC to the Network Switch with the RJ-45 cable will be in IP conflict and will not function normally. For more details, please follow our User's Manual on www.Advidia.com Or contact Technical Support @ 713.621.9779 - Panasonic A-55 | A-55 Quick Installation Guide - Page 3
and click on Configuration: Go to Image: And set EPTZ to Close. You will see a message in the lower right that says Save Succeeded. Continue instructions on following page. - Panasonic A-55 | A-55 Quick Installation Guide - Page 4
Once EPTZ has been disabled, we will need to focus the camera, click on Live View and click on the PTZ control button: From here you can use the One Touch Focus button to get you close and then use the Focus and Zoom controls to tighten up and clean up the image. If you want to disable these
-
1 -
2 -
3 -
4
 |
 |
Advidia Camera Finder Utility
Windows Explorer via UPnP
The Advidia Camera Finder Utility is available on
the provided CD.
Run the Advidia Camera Finder Utility to start auto
device search. Click on the underlined
IP links to access device. There is no need to
change device IPs. (See image below)
Go to Start ->
My Computer and select “Network”
to search. Double-Click on the device to open its
web page.
Your default browser must be Internet Explorer
to use this method
A-Series
Quick Installation Guide
I.
Package Contents:
•
Camera
•
Power Adapter (optional)
•
Mounting Accessories
•
Quick Installation Guide
II.
Required Equipment Before Installation
•
PC + Monitor
•
RJ
-45 Network cable (1 for each device + 1 for PC)
•
Network Switch
•
Power Adapter with Terminal Block (Optional)
(PoE switches that are IEEE802.3af compliant can
power cameras directly without adapter. For
devices connected to non-PoE switches, please
use Power Adapter with terminal block. Connect
the white striped wire to 12V pin, and the black wire
to the GND pin. (See image)
III.
Default Settings
•
IP Address :
192.0.0.64
•
Username:
Admin
•
Password:
12345
IV.
Accessing Your Camera
–
Automatic IP Setup (With Router/DHCP server)
1.
Connect both the PC and the device to your Network Switch with RJ-45 Network cables. If it is
a PoE enabled Switch, then the device is powered on. If it is NOT a PoE enabled Switch, you will
need to use a Power Adapter with your IP device.
2.
You can find your devices either via Advidia Camera Finder Utility or via Windows Explorer.