Panasonic AG-CX8 Operating Instructions

Panasonic AG-CX8 Manual

Get Panasonic AG-CX8 PDF manuals and user guides View all Panasonic AG-CX8 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AG-CX8 manual content summary:

  • Panasonic AG-CX8 | Operating Instructions - Page 1
    Operating Instructions Memory Card Camera-Recorder "(- $9 Model No. "(- $9 "(- $9 Please read these instructions carefully before using this product, and save this manual for future use. P W0220SQ0 -FJ ENGLISH DVQP2236ZA
  • Panasonic AG-CX8 | Operating Instructions - Page 2
    the back of your camera. Be sure to retain this manual as your convenient camera information source. Date of Purchase Dealer Purchased not remove covers. ≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel. CAUTION! To reduce the risk of fire, electric shock or
  • Panasonic AG-CX8 | Operating Instructions - Page 3
    continued compliance, follow the attached installation instructions and use only shielded interface cables when Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: 1-800-524-1448 THE FOLLOWING APPLIES does not show that any health problems are associated with using low power wireless
  • Panasonic AG-CX8 | Operating Instructions - Page 4
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Panasonic AG-CX8 | Operating Instructions - Page 5
    Safety Precautions ∫ Concerning the AC adaptor AC adaptor This AC adaptor operates on AC between 100 V and 240 V. But ≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only. ≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to
  • Panasonic AG-CX8 | Operating Instructions - Page 6
    , do not use it in direct contact with the skin for a long period of time. ≥ When using this unit for a long period of time, use a support such as a tripod. Low temperature burns may result if any high temperature part of this unit or hot air from the ventilation openings on the
  • Panasonic AG-CX8 | Operating Instructions - Page 7
    the U.S. and other countries. ≥ App Store is a service mark of Apple Inc. ≥ Google, Android and Google Play names, etc., contained in this instruction manual are trademarks or registered trademarks of aware that the part numbers for the models that support the functions are shown. ≥ Not all models
  • Panasonic AG-CX8 | Operating Instructions - Page 8
    ∫ Conventions used in this manual ≥ Words and phrases in [ ] brackets indicate content displayed in the LCD monitor. ≥ Words and phrases in < > brackets indicate design text used on this unit, such
  • Panasonic AG-CX8 | Operating Instructions - Page 9
    of the internal clock 37 Preparing the memory card 38 Memory cards supported by the unit (As of January 2020 38 Preventing unintentional erasing 39 111 AE level (exposure compensation 112 Brightness adjustment 113 Focusing (manual focus 113 Setting the shutter speed 114 Area mode function
  • Panasonic AG-CX8 | Operating Instructions - Page 10
    142 Digital zoom function 143 Level gauge 143 Operation icon screen display 144 Displaying the operation icon screen 144 Multi manual function 145 Displaying the operation icon screen 146 Adjusting headphone volume 146 Chapter 6 Playback 147 Thumbnail operation 148 Thumbnail operation
  • Panasonic AG-CX8 | Operating Instructions - Page 11
    Chapter 1 Overview Before using the unit, read this chapter.
  • Panasonic AG-CX8 | Operating Instructions - Page 12
    Before using the unit Chapter 1 Overview - Before using the unit ∫ Before using the unit, always check if the built-in battery is not consumed, and then set the date/time. The date of the internal clock of the unit resets to January 1, 2020 if the built-in battery is exhausted. This may result in
  • Panasonic AG-CX8 | Operating Instructions - Page 13
    Chapter 1 Overview - Before using the unit ∫ Do not apply insecticide or volatile material to the camera. ≥ The main unit may deform or the paint may peel off when insecticide or volatile material is applied. ∫ Do not allow the camera to remain in contact with a rubber or vinyl object for a long
  • Panasonic AG-CX8 | Operating Instructions - Page 14
    not possible due to malfunction. ≥ When requesting a repair for the handle unit, request a repair for the video camera as well, as the cause of the problem may be in the video camera. - 14 -
  • Panasonic AG-CX8 | Operating Instructions - Page 15
    Chapter 1 Overview - Accessories/Optional accessories Accessories/Optional accessories Accessories Check the accessories before using this unit. Battery pack (Parts No.: AG-VBR59) (l 27) Eye cup (l 31) AC adaptor (l 28) AC cable (l 28) ≥For AC adaptor Lens hood (l 30) ≥Pre-attached to the main
  • Panasonic AG-CX8 | Operating Instructions - Page 16
    Chapter 1 Overview - When turning on the power for the first time When turning on the power for the first time The time zone, date, and time are not set when the unit is shipped. [TIME ZONE] is displayed in the LCD monitor when the power is turned on for the first time. Follow the guidance and make
  • Panasonic AG-CX8 | Operating Instructions - Page 17
    on this unit may cause a malfunction. Card reader mode Data (files) for performing nonlinear editing on a computer are transferred. ≥ The unit supports USB2.0.    A Memory card*1 B USB2.0 cable*2 C Computer *1 Memory cards are optionally available. They are not supplied with the unit. *2 A USB2
  • Panasonic AG-CX8 | Operating Instructions - Page 18
    time code/user bits settings) ≥ Menu Operations ≥ Starting and stopping streaming (when the function is assigned to the USER button) The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a single device. For details about operation
  • Panasonic AG-CX8 | Operating Instructions - Page 19
    Chapter 2 Description of Parts This chapter describes the names, functions, and operations of parts on the unit.
  • Panasonic AG-CX8 | Operating Instructions - Page 20
    ] and [MF] switch each time you press the button. The focal point goes to infinity after you press and hold the button, and then the manual focus mode is engaged. [AF]: Changes to the auto focus mode. The auto focus mode adjusts the focus automatically. [MF]: Changes to the
  • Panasonic AG-CX8 | Operating Instructions - Page 21
    setting. 30 Multidial (l 145) Moves, selects, and sets the menu while the menu is displayed. Use the multidial to also operate thumbnails, select the multi manual function and select/set the various operation icons. 31 32 33 37 38 39 34 35 36 40 31 Fan inlet Fan inlet for cooling
  • Panasonic AG-CX8 | Operating Instructions - Page 22
    Chapter 2 Description of Parts - Main unit 42 43 44 45 52 42 Status indicator (l 36) Illuminates when power is on. 43 Battery release lever (l 27) Used when removing the battery from the main unit. 44 Battery mounting section (l 27) Attaches a battery. 45 Viewfinder (l 53) 46 REC button (on the
  • Panasonic AG-CX8 | Operating Instructions - Page 23
    dial. 14 switch (l 128) Selects how the recording level for audio channel 1 is adjusted. : Adjusted automatically. : Adjusted manually with the dial. 15 dial (l 128) Adjust the recording level of audio channel 1. 16 Handle unit
  • Panasonic AG-CX8 | Operating Instructions - Page 24
    Chapter 2 Description of Parts - Handle unit (supplied) 17 18 19 20 21 22 23 26 25 24 17 Light cover ≥ Keep the Light cover out of reach of children to prevent swallowing. 18 Built-in LED light (l 122) 19 Tally lamp (l 54) Illuminates when the recording is started. Flashes when the battery
  • Panasonic AG-CX8 | Operating Instructions - Page 25
    Basic operation Chapter 2 Description of Parts - Basic operation Multidial operation Operate the multidial on the main unit by turning it in vertical direction or pushing it. ≥ Turning the multidial in vertical direction will move the cursor. ≥ Pressing the multidial will select or confirm the
  • Panasonic AG-CX8 | Operating Instructions - Page 26
    Chapter 3 Preparation Before you use the unit, attach the battery following the procedures in this chapter. The attaching of accessories is also described in this chapter.
  • Panasonic AG-CX8 | Operating Instructions - Page 27
    mounting section Removing the battery Be sure to hold down the power button until the status indicator goes off. Then remove the battery while supporting the unit to prevent it from dropping. B Status indicator  Move the battery release lever in the direction indicated by the arrow and remove the
  • Panasonic AG-CX8 | Operating Instructions - Page 28
    Chapter 3 Preparation - Power supply Charging the battery The battery is not charged at the time of purchase. Use only after charging sufficiently. It is recommended that you have one extra battery. ≥ It is recommended to perform charging of the battery in a location with ambient temperature of 10
  • Panasonic AG-CX8 | Operating Instructions - Page 29
    . The charging time or the continuous recordable time differs depending on the use condition such as high or low temperature. ∫ Batteries that support quick charging For quick charging of a battery (AG-VBR59: supplied/optional), use a battery charger (AG-BRD50: optional). @ NOTE 0 Battery is warm
  • Panasonic AG-CX8 | Operating Instructions - Page 30
    Attaching accessories Chapter 3 Preparation - Attaching accessories Adjusting the grip belt ≥ Adjust the grip belt so that it fits the size of your hand. ≥ If the buckle is difficult to tighten, move the pad backward and tighten the buckle again. 4  31  2  A Button B Buckle C Pad 1 Undo
  • Panasonic AG-CX8 | Operating Instructions - Page 31
    Chapter 3 Preparation - Attaching accessories Opening and closing the lens cover Use the lens cover switching lever to open and close the lens cover. Open the lens cover when shooting. When not using the unit, close the lens cover in order to protect the lens. @ NOTE 0 Do not press the lens cover
  • Panasonic AG-CX8 | Operating Instructions - Page 32
    Chapter 3 Preparation - Attaching accessories Attaching the handle unit ¥ Press the power button to turn off the unit. (l 36) 1 Open the microphone holder. Open buckle 1, and detach fitting 2 from hook 3.  2 Attach the microphone holder to the microphone holder mounting section on the handle
  • Panasonic AG-CX8 | Operating Instructions - Page 33
    Chapter 3 Preparation - Attaching accessories 5 While pressing the handle unit mounting screw down, turn it in the direction indicated by arrow 2 until it stops.   ∫ How to remove Remove by doing the steps for attaching in reverse. @ NOTE 0 Keep the microphone holder mounting screws out of
  • Panasonic AG-CX8 | Operating Instructions - Page 34
    Chapter 3 Preparation - Attaching accessories Attaching the external microphone ∫ Attaching an external microphone to the / terminals When the handle unit (supplied) is attached to the unit, you can attach an external microphone such as a unidirectional microphone AG-MC200G (
  • Panasonic AG-CX8 | Operating Instructions - Page 35
    1 Attach the external microphone to the accessory shoe A.  ≥ For details about how to attach the external microphone, refer to the operating instructions for the external microphone. 2 Connect the microphone cable to the terminal. Attaching a tripod The tripod mounting holes accept 1/4-20
  • Panasonic AG-CX8 | Operating Instructions - Page 36
    Chapter 3 Preparation - Turning on/off the power Turning on/off the power Turning the unit on and off with the power button 1 Open the LCD monitor and press the power button to turn on the unit.  A The status indicator lights on. ∫ To turn off the unit Hold down the power button until the status
  • Panasonic AG-CX8 | Operating Instructions - Page 37
    Chapter 3 Preparation - Setting the date/time of the internal clock Setting the date/time of the internal clock The date/time/time zone are recorded as meta data in the clip while shooting. This will affect the management of recorded clips, so always check and set the date/time and time zone before
  • Panasonic AG-CX8 | Operating Instructions - Page 38
    SD standards. j A memory card with 4 GB or more without the SDHC logo j A memory card with 48 GB or more without the SDXC logo ≥ This unit supports the following memory cards: j (For the CX7 / CX8 ) SDHC/SDXC memory cards that conform with the UHS-I UHS Speed Class 3 standard j (For the CX10 ) SDHC
  • Panasonic AG-CX8 | Operating Instructions - Page 39
    No remaining recording capacity Write-protected Recording not possible Off Off (For the CX10 ) No memory card inserted Illegal format Card not supported During card reader mode Setting to [NETWORK] menu → [NETWORK FUNC] → [NDI|HX] Memory card status Both loading/writing are permitted. Current
  • Panasonic AG-CX8 | Operating Instructions - Page 40
    Chapter 3 Preparation - Preparing the memory card Inserting/removing the memory card Inserting the memory card The memory card to use with the unit should always be formatted on the unit. (l 40) ≥ Formatting the memory card will erase all of the recorded data which cannot be restored.      
  • Panasonic AG-CX8 | Operating Instructions - Page 41
    Chapter 3 Preparation - Preparing the memory card Recording time of the memory card ≥ Memory cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording. ≥ If recording for long periods, prepare batteries for 3 or 4 times the
  • Panasonic AG-CX8 | Operating Instructions - Page 42
    Chapter 3 Preparation - Preparing the memory card When the file format is MP4 Recording format UHD FHD Recording rate 100 Mbps 72 Mbps 50 Mbps 64 GB Approx. 1 h 20 min Approx. 1 h 50 min Approx. 2 h 40 min Recording capacity 128 GB Approx. 2 h 40 min Approx. 3 h 40 min Approx. 5 h 20 min ≥ "h"
  • Panasonic AG-CX8 | Operating Instructions - Page 43
    Chapter 3 Preparation - Preparing the memory card Handling the recording data Folder structure example of a memory card Various important information is contained in the recording data, and it is linked with the folder structure and management files as shown in the figure. If such information is
  • Panasonic AG-CX8 | Operating Instructions - Page 44
    data loss. For details on downloading P2 Viewer Plus and the operating environment, visit the support desk at the following website: https://pro-av.panasonic.net/en/products/ag-cx10/index.html 0 Follow the instructions below when using a general IT tool such as the OS standard file manager equipped
  • Panasonic AG-CX8 | Operating Instructions - Page 45
    Chapter 3 Preparation - Preparing the memory card ∫ When the folder name is 001RAQAM Following video data is saved in the folder. ≥ Number of pixels: 3840×2160 ≥ Frame rate: 59.94 fps ≥ Video format: Progressive recording (MOV, LPCM) File name of the MOV format/MP4 format video data The format of
  • Panasonic AG-CX8 | Operating Instructions - Page 46
    Setting of time data Chapter 3 Preparation - Setting of time data The unit provides time code, user bits, and date and time (real time) data as time data, and records in each frame synchronized with the video. The time data is also recorded as the clip meta data. Definition of time data ∫ Time
  • Panasonic AG-CX8 | Operating Instructions - Page 47
    Chapter 3 Preparation - Setting of time data How to input user bits By setting user bits, information such as memos (date, time) up to 8 digits long (hexadecimal) can be recorded. 1 Select the [RECORDING] menu → [TC/UB] → [UB MODE] → [USER]. 2 Select the [RECORDING] menu → [TC/UB] → [UB PRESET]. The
  • Panasonic AG-CX8 | Operating Instructions - Page 48
    Chapter 3 Preparation - Setting of time data ∫ Setting range of time code The range of the time code that can be set differs depending on the frame rate of [REC FORMAT]. [FREQUENCY] [59.94Hz] [50.00Hz] Frame rate of [REC FORMAT] 59.94p, 29.97p, 59.94i 23.98p 50.00p, 25.00p, 50.00i Range of the
  • Panasonic AG-CX8 | Operating Instructions - Page 49
    Chapter 3 Preparation - Assigning function to the USER buttons Assigning function to the USER buttons      F1: F2: F3: F4: F5: F6: FLUO SPARK STILL CINE V CINE D AWB  AREA  FACE DETECT  ZEBRA  MENU COUNTER RESET    A button B button C button
  • Panasonic AG-CX8 | Operating Instructions - Page 50
    Chapter 3 Preparation - Assigning function to the USER buttons Item (USER button icon display) Description [ONE PUSH AF] ([ONE PUSH AF]) Assigns the one-push auto focus function. [S.GAIN] ([S.GAIN]) Assigns the function that switches to super gain. [AREA] ([AREA]) Assigns the area function.
  • Panasonic AG-CX8 | Operating Instructions - Page 51
    Chapter 3 Preparation - Assigning function to the USER buttons USER button functions [SUPER SLOW] [LEVEL GAUGE] [LCD/VF DETAIL] [LOAD SETUP FILE] [LCD BACKLIGHT] [CARD READER MODE] [STREAMING START] [REAR RING] Menu settings [SYSTEM] menu → [SUPER SLOW] [VIDEO OUT/LCD/VF] menu → [LEVEL GAUGE] → [
  • Panasonic AG-CX8 | Operating Instructions - Page 52
    Chapter 3 Preparation - Adjusting and setting the LCD monitor Adjusting and setting the LCD monitor Using the LCD monitor This unit is equipped with a 3.5-inch LCD monitor. Use either the viewfinder or the LCD monitor depending on your purpose and the shooting conditions. 1 Open the LCD monitor. The
  • Panasonic AG-CX8 | Operating Instructions - Page 53
    Chapter 3 Preparation - Adjusting and setting the viewfinder Adjusting and setting the viewfinder This unit is equipped with a 0.24-inch viewfinder. Use either the viewfinder or the LCD monitor depending on your purpose and the shooting conditions. Using the viewfinder When the LCD monitor is
  • Panasonic AG-CX8 | Operating Instructions - Page 54
    Tally lamp Chapter 3 Preparation - Tally lamp When the handle unit (supplied) is attached to the unit, the tally lamp can be illuminated during recording. 1 Select the [OTHERS] menu → [HANDLE TALLY LED] → [ON]. ≥ The tally lamp will flash when the unit is in the following status. j When the
  • Panasonic AG-CX8 | Operating Instructions - Page 55
    Chapter 4 Operation This chapter describes how to operate the screen of this unit, how to operate the menu, the structure of the menu, and details of the menu.
  • Panasonic AG-CX8 | Operating Instructions - Page 56
    Chapter 4 Operation - Basic operation of the screen Basic operation of the screen Major button operation and screen display   1 button 2 button ∫ button Displays the thumbnail screen. Playback, copy, delete, or protect of a clip can be performed. For details
  • Panasonic AG-CX8 | Operating Instructions - Page 57
    Chapter 4 Operation - Basic operation of the screen Major button operation and switching screen The screens switch as shown below when you press the button, button, button, or multidial.   TCR 01 : 09 : 44. 23 2 3  0001 0002 0003 00:00:
  • Panasonic AG-CX8 | Operating Instructions - Page 58
    Operating each screen Chapter 4 Operation - Operating each screen Camera image screen Displays the shooting screen. For details about the camera image screen, refer to "Screen status display". (l 161) Thumbnail screen Playback, copy, delete, or protect of a clip can be performed. For details about
  • Panasonic AG-CX8 | Operating Instructions - Page 59
    Chapter 4 Operation - Basic operation of the menu Basic operation of the menu The setting of the unit can be changed with the menu in accordance to the shooting scene or recording contents. Set data is written and saved in the main unit memory. ≥ There are 2 methods of operation: a method to operate
  • Panasonic AG-CX8 | Operating Instructions - Page 60
    Chapter 4 Operation - Basic operation of the menu Displaying the menu Displays the menu, and select the menu or item to set. 1 Press the button. The menu is displayed. 1 2 3 4 5  1 [`]/[{] Switches the page or changes the value when selected. These button icons are not available if they
  • Panasonic AG-CX8 | Operating Instructions - Page 61
    Chapter 4 Operation - Basic operation of the menu Operating the menu Various settings are possible from the menu. There are 2 methods of operation: a method to operate with the multidial, or a method to touch the LCD monitor. When operating with the multidial Operate the multidial on the main unit
  • Panasonic AG-CX8 | Operating Instructions - Page 62
    Chapter 4 Operation - Basic operation of the menu When operating by touching the LCD monitor Operate by touching the LCD monitor. Fig. 1 Fig. 2  1 Press the button. The menu is displayed. 2 Select the menu to set. The lower level menu is displayed. ≥ The confirmation screen is displayed
  • Panasonic AG-CX8 | Operating Instructions - Page 63
    Menu settings Chapter 4 Operation - Menu settings [THUMBNAIL] menu Performs confirmation or deleting of the recording clip. This menu can be set when the thumbnail screen is displayed. [PLAYBACK] Sets the playback of recorded clips. [ALL SLOT] will always be selected when you switch from the
  • Panasonic AG-CX8 | Operating Instructions - Page 64
    Chapter 4 Operation - Menu settings [CAMERA] menu Sets the basic functions of the camera. This menu cannot be set when the thumbnail screen is displayed. [SW MODE] [ZOOM RING] Sets the rear ring 1 direction and zoom control when performing zoom operations. [DOWN TELE] AA Zooms in when turned
  • Panasonic AG-CX8 | Operating Instructions - Page 65
    Chapter 4 Operation - Menu settings [ATW] You can set ATW (auto tracking white balance function) when the button is pressed. [Ach] If you have pressed the button to switch to [Ach], this is set to [ATW]. [Bch] [PRE] [OFF] If you have pressed the button to
  • Panasonic AG-CX8 | Operating Instructions - Page 66
    Chapter 4 Operation - Menu settings [AUTO SLOW SHTR] You can make images brighter by making the shutter speed slower in dark places. The slow shutter works when in the auto shutter mode. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [OFF]) @ NOTE 0 In the following case,
  • Panasonic AG-CX8 | Operating Instructions - Page 67
    Chapter 4 Operation - Menu settings [USER4] [USER5] [USER6] [USER7] [USER8] [USER9] [USER10] [USER11] [USER12] Sets the function to assign to the button. (Factory setting: [AE LEVEL]) Sets the function to assign to the button. (Factory setting: [REC CHECK]) Sets the function to
  • Panasonic AG-CX8 | Operating Instructions - Page 68
    Chapter 4 Operation - Menu settings [NAME EDIT] Edits the name of the scene file selected in the scene file menu. (Maximum 8 characters) ≥ Refer to page 103 for setting procedures. [LOAD/SAVE/INITIALIZE] Loads/saves/initializes the setting values of the scene file assigned to the current scene
  • Panasonic AG-CX8 | Operating Instructions - Page 69
    Chapter 4 Operation - Menu settings [CHROMA LEVEL] Sets the chroma level of PR and PB signals. The items that can be set are as follows. ≥ [j50]...[i50] [CHROMA PHASE] Finely adjusts the chroma phase of the PR signal and PB signal. The items that can be set are as follows. ≥ [j31]...[i31] [MATRIX
  • Panasonic AG-CX8 | Operating Instructions - Page 70
    Chapter 4 Operation - Menu settings [B-B-Cy] [SAT] Corrects the color saturation between blue and the color which is intermediate between blue and cyan. [PHASE] Corrects the hue between blue and the color which is intermediate between blue and cyan. The items that can be set are as follows. ≥
  • Panasonic AG-CX8 | Operating Instructions - Page 71
    Chapter 4 Operation - Menu settings [SKIN TONE DTL.] The skin of human subjects can be made to appear smoother when recorded. The items that can be set are as follows. ≥ [ON], [OFF] @ NOTE 0 If the background or anything else in the scene has colors similar to the skin color, they will also be
  • Panasonic AG-CX8 | Operating Instructions - Page 72
    as follows. ≥ [ON], [OFF] @ NOTE 0 In the following cases, this cannot be set. j When all of iris, gain, and shutter speed are set to manual in the manual mode j When IR recording is enabled [AE LEVEL EFFECT] When AE level is enabled, you can set the exposure compensation value. Set to the
  • Panasonic AG-CX8 | Operating Instructions - Page 73
    the limiter when the method to adjust the audio input level for audio channel 1 is manual. The items that can be set are as follows. ≥ [ON], [OFF] the limiter when the method to adjust the audio input level for audio channel 2 is manual. The items that can be set are as follows. ≥ [ON], [OFF] (
  • Panasonic AG-CX8 | Operating Instructions - Page 74
    Chapter 4 Operation - Menu settings [OUTPUT SETTINGS] [AUDIO OUT] Sets the audio channel and the format to output from the headphone terminal, and the built-in speaker. [CH1] Outputs the signal for audio channel 1 as monaural. [CH2] Outputs the signal for audio channel 2 as monaural. [CH1/2
  • Panasonic AG-CX8 | Operating Instructions - Page 75
    Chapter 4 Operation - Menu settings [SDI REC REMOTE] Sets if the recording operation against the external equipment connected to the terminal (such as recorder) is to be controlled or not. [ON] Controls the recording operation of the external equipment. [OFF] Does not control the
  • Panasonic AG-CX8 | Operating Instructions - Page 76
    Chapter 4 Operation - Menu settings [HDMI OUT ZEBRA] Sets whether to superimpose the zebra signal to the output from the terminal. The settings of the zebra signal follow the zebra signal settings in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST]. [ON] [OFF] (Factory setting: [OFF])
  • Panasonic AG-CX8 | Operating Instructions - Page 77
    Chapter 4 Operation - Menu settings [CONTRAST] Adjusts the contrast of the viewfinder. The items that can be set are as follows. ≥ [j15]...[i15] (Factory setting: [0]) [RED TINT] Finely adjusts the strength of red on the viewfinder. The items that can be set are as follows. ≥ [j10]...[i10] (Factory
  • Panasonic AG-CX8 | Operating Instructions - Page 78
    Chapter 4 Operation - Menu settings [FRAME RATE] Switches display/hide of the frame rate for super slow recording. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [CLIP NAME] Switches display/hide of the clip file name to be recorded. Up to 8 characters from the
  • Panasonic AG-CX8 | Operating Instructions - Page 79
    date and time. Displays only the date. Displays only the time. Displays the date and time. (Factory setting: [OFF]) [MULTI MANUAL] Switches display/hide of the multi manual function. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [D.ZOOM] Switches display/hide of
  • Panasonic AG-CX8 | Operating Instructions - Page 80
    Chapter 4 Operation - Menu settings [PLAYBACK STATUS] Switches display/hide of the playback status. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [MARKER] [CENTER MARKER] Switches the type of center marker. [1] i (large) [2] Open center (large) [3] i (small)
  • Panasonic AG-CX8 | Operating Instructions - Page 81
    Chapter 4 Operation - Menu settings [DETAIL] Sets the intensity of the contour for the video to make it easier to focus. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [OFF]) [DETAIL LEVEL] Sets the intensity of the contours. The items that can be set are as follows. ≥ [
  • Panasonic AG-CX8 | Operating Instructions - Page 82
    Chapter 4 Operation - Menu settings [LEVEL GAUGE] [LEVEL GAUGE] Switches display/hide of the level gauge. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [LEVEL GAUGE RESET] Sets the horizontal and vertical reference value set by [LEVEL GAUGE SET] in the USER button
  • Panasonic AG-CX8 | Operating Instructions - Page 83
    Chapter 4 Operation - Menu settings [REC FUNCTION] [REC MODE] Selects the recording mode. [NORMAL] Performs the standard recording. [INTERVAL] Performs the interval recording. (l 134) (Factory setting: [NORMAL]) [INTERVAL TIME] Sets the interval duration for interval recording. The items
  • Panasonic AG-CX8 | Operating Instructions - Page 84
    Chapter 4 Operation - Menu settings [UB MODE] Selects the user bits mode. User bits information is recorded in the clip. [FRAME RATE] [USER] [TIME] [DATE] [TC] [CLIP NAME] (Factory setting: [USER]) Selects the image information (such as frame rate) of the camera. Selects the user bits set in [UB
  • Panasonic AG-CX8 | Operating Instructions - Page 85
    Chapter 4 Operation - Menu settings [IP REMOTE] Perform settings for the IP remote (remote operation by the HC ROP app). [ENABLE/DISABLE] Sets whether to enable the IP remote function. The items that can be set are as follows. ≥ [ENABLE], [DISABLE] (Factory setting: [DISABLE]) [USER ACCOUNT]
  • Panasonic AG-CX8 | Operating Instructions - Page 86
    Chapter 4 Operation - Menu settings [START TRIGGER] Sets whether to start streaming with operation of the unit or operation of the application software. The items that can be set are as follows. ≥ [CAMERA], [RECEIVER], [RECEIVER(MULTICAST)] (Factory setting: [RECEIVER]) [CONNECTION INFO.] Selects
  • Panasonic AG-CX8 | Operating Instructions - Page 87
    connection method to the wireless LAN. [DIRECT] [INFRA(SELECT)] [INFRA(MANUAL)] (Factory setting: [DIRECT]) It can connect directly without using a list. Connects to the wireless access point. Wireless access point is entered manually. [SSID] Enters or displays the network name of this unit or
  • Panasonic AG-CX8 | Operating Instructions - Page 88
    ] Does not use DHCP. [CLIENT] Performs automatic acquisition through DHCP if connecting by setting [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/ [INFRA(MANUAL)]. [SERVER] Enables the DHCP server function of the unit when connecting by setting [WLAN PROPERTY] → [TYPE] → [DIRECT]. (Factory setting
  • Panasonic AG-CX8 | Operating Instructions - Page 89
    Chapter 4 Operation - Menu settings [IP ADDRESS] Sets the IP address. (Factory setting: [192.168.0.1]) @ NOTE 0 Cannot be set when [USB-LAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected. [SUBNET MASK] Sets the subnet mask. (Factory setting: [255.255.255.0]) @ NOTE 0 Cannot be set when [USB-LAN IPv4
  • Panasonic AG-CX8 | Operating Instructions - Page 90
    Chapter 4 Operation - Menu settings [UTILITY] Performs the various operations related to the network function. [NETWORK INITIALIZE] Returns the various networks settings to the factory default state and restarts the unit. CX10 [EASY IP SETTING] Sets the time to accept EASY IP Setup Software. The
  • Panasonic AG-CX8 | Operating Instructions - Page 91
    Chapter 4 Operation - Menu settings [REC FORMAT] Sets the signal format and codec mode for recording. The items that can be set are as follows. [FREQUENCY] [FILE FORMAT] [P2]* [59.94Hz] [MOV] [MP4] [AVCHD] [P2]* [50.00Hz] [MOV] [MP4] [AVCHD] * Available for setting when using CX10 . Items
  • Panasonic AG-CX8 | Operating Instructions - Page 92
    Chapter 4 Operation - Menu settings [SETUP FILE(SD CARD)] Loads or saves setup files on a memory card. [LOAD] [SAVE] [SAVE AS] Selects the setup file saved on the memory card to load on the unit. The unit will automatically restart after loading. Overwrites the file selected in the list of the
  • Panasonic AG-CX8 | Operating Instructions - Page 93
    TXT" for the external drive recognized by a computer. The items that can be selected are as follows. ≥ [YES], [NO] @ NOTE 0 When switched to service mode while using a battery, the LCD monitor turns off after approximately 5 seconds. The LCD monitor turns on when you perform the following operations
  • Panasonic AG-CX8 | Operating Instructions - Page 94
    Chapter 4 Operation - Menu settings [APPROVED REGULATION] Display the authentication information for this unit. ≥ Select [`]/[{] and you can show the second page. [LANGUAGE] Sets the display language. The items that can be selected are as follows. [English] [Español] [Français] (Factory setting: [
  • Panasonic AG-CX8 | Operating Instructions - Page 95
    Chapter 4 Operation - Factory setting value of the scene file Factory setting value of the scene file [SCENE FILE] menu The factory settings of the [SCENE FILE] menu and the items that can be selected differ depending on the [SCENE FILE] menu → [FILE SELECT] setting. Item [F1:] [MASTER DTL]
  • Panasonic AG-CX8 | Operating Instructions - Page 96
    Chapter 4 Operation - Target items for scene file/setup file/initialization Target items for scene file/setup file/initialization ≥ SCENE: Items saved in scene files. ≥ SETUP: Items saved in setup files. ≥ INITIALIZE: Items that are initialized with the [OTHERS] menu → [MENU INITIALIZE]. ≥ Meaning
  • Panasonic AG-CX8 | Operating Instructions - Page 97
    Chapter 4 Operation - Target items for scene file/setup file/initialization [SCENE FILE] menu Item [NAME EDIT] [LOAD/SAVE/INITIALIZE] [MASTER DTL] [DTL CORING] [V.DTL LEVEL] [RB GAIN CONTROL SETTING] [R GAIN AWB A] [B GAIN AWB A] [R GAIN AWB B] [B GAIN AWB B] [AWB A GAIN OFFSET] [AWB B
  • Panasonic AG-CX8 | Operating Instructions - Page 98
    Chapter 4 Operation - Target items for scene file/setup file/initialization [AUDIO] menu [HANDLE UNIT INPUT SETTING] [MIC SETTING] [INPUT SETTINGS] [OUTPUT SETTINGS] [ALARM] Item [INPUT1 MIC LEVEL] [INPUT2 MIC LEVEL] [INPUT1 LINE LEVEL] [INPUT2 LINE LEVEL] [CH1 LEVEL] [CH2 LEVEL] [CH1 LEVEL
  • Panasonic AG-CX8 | Operating Instructions - Page 99
    FACE] [AUDIO LEVEL METER] [GAIN] [ND FILTER] [SHUTTER] [IRIS] [AE LEVEL] [ZOOM/FOCUS] [WHITE BALANCE] [FACE DETECTION] [DATE/TIME] [MULTI MANUAL] [D.ZOOM] [IR REC] [PLAYBACK STATUS] [CENTER MARKER] [SAFETY MARKER] [FRAME MARKER] [FOCUS ASSIST SW] [EXPAND MODE] [EXPAND VALUE] [PEAKING LEVEL] [PEAKING
  • Panasonic AG-CX8 | Operating Instructions - Page 100
    Chapter 4 Operation - Target items for scene file/setup file/initialization [RECORDING] menu [FORMAT MEDIA] [CLIP NAME] [FILE SPLIT]*1 [2 SLOTS FUNC.] [PRE REC] [REC FUNCTION] [TC/UB] [REC COUNTER] [TIME STAMP] Item [CAM INDEX] [NEXT CARD COUNT] [REC MODE] [INTERVAL TIME] [TC PRESET] [UB PRESET]
  • Panasonic AG-CX8 | Operating Instructions - Page 101
    [SLOT FOR LOAD/SAVE] [HANDLE TALLY LED] [CLOCK] [CLOCK SETTING] [TIME ZONE] [DATE FORMAT] [USB DEVICE] [CARD READER MODE] [SERVICE MODE] [INFORMATION] [VERSION] [OPERATION TIME] [UPDATE] [ECO MODE] [BATTERY] [AC] [NETWORK] [APPROVED REGULATION] [LANGUAGE] [MENU INITIALIZE] SCENE
  • Panasonic AG-CX8 | Operating Instructions - Page 102
    Handling setting data Chapter 4 Operation - Handling setting data Scene files File structure of the setting data The scene files of [F1:] to [F6:] can be saved in the main unit memory in accordance to the scene file number. What can be saved as a scene file is the setting contents of the [SCENE
  • Panasonic AG-CX8 | Operating Instructions - Page 103
    Chapter 4 Operation - Handling setting data 3 Select [Enter]. A confirmation screen is displayed. 4 Select [SET]. The file is saved. ≥ An error message may be displayed. For details about the error message, refer to "Cases indicated by error messages". (l 195) ∫ Saving the scene file by overwriting
  • Panasonic AG-CX8 | Operating Instructions - Page 104
    Chapter 4 Operation - Handling setting data Setup file You can save the setting information for this unit to the main unit memory or a memory card in card slot 1, and load it from a memory card into this unit. Saving the setup file The setup file can be overwritten to a file on the main unit memory
  • Panasonic AG-CX8 | Operating Instructions - Page 105
    Chapter 5 Shooting This chapter describes the basic procedure for recording. This chapter also describes the special recording method.
  • Panasonic AG-CX8 | Operating Instructions - Page 106
    black balance. (l 116) ≥ To adjust the setting of the audio input and the recording level, switch audio input. (l 127) @ NOTE 0 The settings made in manual mode are not maintained for the following settings when you switch to auto mode: j Focus, lens stop, gain, shutter speed, white balance ∫ Camera
  • Panasonic AG-CX8 | Operating Instructions - Page 107
    When the button has been pressed to switch the card slot to be recorded to j When switched to [CARD READER MODE] or [SERVICE MODE] j When the [RECORDING] menu → [2 SLOTS FUNC.] → [SIMUL REC]/[BACKGR REC] is set j When the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set
  • Panasonic AG-CX8 | Operating Instructions - Page 108
    Chapter 5 Shooting - Shooting CX10 When [FILE FORMAT] is set to [P2] ∫ Video Resolution FHD (1920×1080) HD (1280×720) ∫ Audio [FREQUENCY] [59.94Hz] [50.00Hz] [59.94Hz] [50.00Hz] [REC FORMAT] [1080-59.94p/AVC-G25] [1080-59.94i/AVC-G50] [1080-59.94i/AVC-G25] [1080-50.00p/AVC-G25] [1080-50.00i/AVC-
  • Panasonic AG-CX8 | Operating Instructions - Page 109
    " (l 29). 0 [FILE FORMAT] is set to [MOV] and [REC FORMAT] is set to [2160-59.94p/HEVC LongGOP 200M] at the time of purchase. 0 For a guide to recording times, refer to "Recording time of the memory card" (l 41). 0 A mosaic-like noise may occur during playback when you make large or fast
  • Panasonic AG-CX8 | Operating Instructions - Page 110
    ring 1 Select the [CAMERA] menu → [SW MODE] → [REAR RING] → [IRIS] or [IRIS/AE LEVEL]. 2 Switch to manual mode with the switch. (l 106) 3 Press the button to switch to manual iris mode. [STD] disappears. 4 Rotate the rear ring. ∫ Iris value CLOSE (F11 to F1.9) OPEN ≥ Value closer
  • Panasonic AG-CX8 | Operating Instructions - Page 111
    A Gain value ≥ [AGC] is displayed in auto gain mode and dB is displayed in manual gain mode. B GAIN 1 Switch to manual mode with the switch. (l 106) 2 Press the button to switch to manual gain mode. The gain display is highlighted in orange. 3 Turn the multidial to adjust, then
  • Panasonic AG-CX8 | Operating Instructions - Page 112
    [REAR RING] → [IRIS/AE LEVEL]. 3 When the switch is set to manual mode, use one of the following operations to switch one of iris, gain, or shutter speed iris is adjusted when the rear ring is turned. Setting with the multi manual function 1 Select the [SCENE FILE] menu → [AE LEVEL] → [
  • Panasonic AG-CX8 | Operating Instructions - Page 113
    be used when IR recording is enabled. 0 The recommended ND filter setting value may not be displayed correctly when the scene is too dark. Focusing (manual focus)  MF50 A Focus value ≥ The focus mode ([AF]/[MF]) and the focus value are displayed. ≥ The units for the focus value can be changed in
  • Panasonic AG-CX8 | Operating Instructions - Page 114
    may not be possible for the camera to keep up with changes in the images. If this occurs, set the iris, focus, and white balance manually. Area mode function Touch the subject to apply various effects tailored to the subject that is touched. ≥ Area auto focus function Adjusts the focus
  • Panasonic AG-CX8 | Operating Instructions - Page 115
    Chapter 5 Shooting - Adjustable settings when shooting Operation of area mode function The function set in the [CAMERA] menu → [SW MODE] → [AREA MODE] can be used by performing the following operation when shooting or while in shooting standby. 1 Either press the USER button assigned to [AREA] or
  • Panasonic AG-CX8 | Operating Instructions - Page 116
    being set is displayed. White balance adjustment Follow the steps below to adjust the white balance automatically. ∫ When stored in white balance [Ach] 1 Switch to manual mode with the switch. (l 106) 2 Set the gain value. (l 111) Normally, set this to 0 dB. If it is too dark, set the
  • Panasonic AG-CX8 | Operating Instructions - Page 117
    Chapter 5 Shooting - Adjusting the white and black balance ∫ White pattern ≥ A white object (cloth or wall) near the subject may also be used for the white pattern. ≥ Required size of white pattern is as follows.   A 1/2 or more of the screen width B 1/2 or more of the screen height ≥ Keep
  • Panasonic AG-CX8 | Operating Instructions - Page 118
    In the [CAMERA] menu → [SW MODE] → [W.BAL VAR], set the color temperature. This can be set from [2000K] to [15000K]. ∫ Setting with the multi manual function 1 Press the button to switch to "Preset". 2 Either press the USER button assigned to [AWB] or touch the USER button icon to
  • Panasonic AG-CX8 | Operating Instructions - Page 119
    recommend adjusting the black balance immediately before shooting. Before adjusting the black balance, prepare the conditions for adjusting the white balance. 1 Switch to manual mode with the switch. (l 106) 2 Press the button to switch to [Ach] or [Bch]. Each time you press
  • Panasonic AG-CX8 | Operating Instructions - Page 120
    Chapter 5 Shooting - Using the zoom function Using the zoom function Adjust the angle of view you want to shoot. The unit has a 24× optical zoom. This can be expanded up to approximately 48 times (approximately 32 times in UHD recording) when the [CAMERA] menu → [SW MODE] → [i.ZOOM] → [ON] is set.
  • Panasonic AG-CX8 | Operating Instructions - Page 121
    ). 0 As the operating noise of fast zoom will be louder than normal, the operating noise may be recorded during recording. If the operating noise is a problem, disable [FAST ZOOM]. 0 Auto focus may not be able to keep up during fast zoom, depending on the subject. 0 Fast zoom cannot be used in
  • Panasonic AG-CX8 | Operating Instructions - Page 122
    Chapter 5 Shooting - Using the built-in LED light Using the built-in LED light By attaching the handle unit (supplied), you can use the built-in LED light to brighten even dark places for recording. 1 Slide the switch to turn on/off the built-in LED light. ON: Light is on OFF: Light is off
  • Panasonic AG-CX8 | Operating Instructions - Page 123
    . It effectively softens or sharpens images, but in some cases, the whole image may become rough due to emphasized noise and edges. To avoid such problems, it is necessary not to add this effect on parts where emphasizing is not needed and keep the details of the parts. ∫ General settings [MASTER
  • Panasonic AG-CX8 | Operating Instructions - Page 124
    Chapter 5 Shooting - Image quality adjustment Color correction function This function sets color saturation and phase. Each of the 16 divisions of color hue can be set individually. Yl-R-R R Yl-Yl-R R-Mg Mg Yl G-Yl-Yl Mg-Mg-B Mg-B-B G-G-Yl B G B-B-Cy Cy-G Cy B-Cy-Cy A [SAT] B [
  • Panasonic AG-CX8 | Operating Instructions - Page 125
    Chapter 5 Shooting - Flash band compensation (FBC) function Flash band compensation (FBC) function This compensates for the phenomena of light and dark bands (flash bands) that horizontally divide images recorded in environments where there are flashes from other cameras, and reduces their effect. 
  • Panasonic AG-CX8 | Operating Instructions - Page 126
    Chapter 5 Shooting - Super slow recording function Super slow recording function It is possible to acquire smooth slow motion video by shooting with a different frame rate from the frame rate to play back. This allows high-speed shooting of 120 fps/100 fps. 1 In [SYSTEM] menu → [FREQUENCY]/[FILE
  • Panasonic AG-CX8 | Operating Instructions - Page 127
    Audio input Chapter 5 Shooting - Audio input The unit can record 2 channels of audio. When the handle unit (supplied) is attached to the unit, you can connect audio equipment or an external microphone to the / terminals. The audio to input to each channel can be switched to the
  • Panasonic AG-CX8 | Operating Instructions - Page 128
    recorded if you continue to record as is. ¥ When connecting equipment that does not support i48 V power supply, set the / switch to or to . Adjusting the audio recording level There are manual adjustment and automatic adjustment as the adjustment method of the audio
  • Panasonic AG-CX8 | Operating Instructions - Page 129
    / switch to j (When the handle unit has not been attached to the unit) Select [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL]/[CH2 LEVEL] → [MANUAL] Confirming the audio input level The input level of the audio can be confirmed in the camera image screen and the AUDIO screen of the
  • Panasonic AG-CX8 | Operating Instructions - Page 130
    NOTE 0 Adjust the volume of the headphones and built-in speaker as follows. j During recording, volume is adjusted with the [ AUDIO MON] multi manual function. (l 146) j During playback, volume is adjusted with the zoom lever (on the grip). (l 155) Confirming audio input setting The setting for the
  • Panasonic AG-CX8 | Operating Instructions - Page 131
    Chapter 5 Shooting - Special recording function Special recording function Special recording such as pre-recording or relay recording is possible by setting the menu. Pre-recording Records the video and audio from specific time before the operation to start the recording.    A Operation to
  • Panasonic AG-CX8 | Operating Instructions - Page 132
    Chapter 5 Shooting - Special recording function 2 Press the REC button. ≥ The recording target switches to another memory card when the remaining recording capacity of one of the memory cards is exhausted during recording and relay recording starts. The number of the card slot that became the
  • Panasonic AG-CX8 | Operating Instructions - Page 133
    Chapter 5 Shooting - Special recording function Background recording If the memory cards are inserted into 2 card slots, set the background recording mode and then press the REC button to start recording simultaneously on card slot 1 and card slot 2. On card slot 1, recording can be repeatedly
  • Panasonic AG-CX8 | Operating Instructions - Page 134
    on the light source and the scene being recorded, color hue and focus may not be automatically set. In case such as this, try adjusting manually. (l 113, 116) 0 When recording for long periods, it is recommended to connect to the AC adaptor for recording. 0 The recording is stopped once when the
  • Panasonic AG-CX8 | Operating Instructions - Page 135
    Chapter 5 Shooting - Special recording function IR recording A night time shooting using the IR light can be performed. ∫ Assigning [IR REC] to the USER button 1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [IR REC]. Set so enable/disable of the IR recording can be switched with a
  • Panasonic AG-CX8 | Operating Instructions - Page 136
    [ZEBRA2] B [ZEBRA2 DETECT] C [ZEBRA1 DETECT] 1 [ON] 2 [OFF] @ NOTE 0 The zebra pattern cannot be recorded. 0 To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra pattern is no longer displayed. (l 110, 111, 114) Displaying the marker
  • Panasonic AG-CX8 | Operating Instructions - Page 137
    so enable/disable of the enlarged display function can be switched with a USER button. 1 Switch to manual mode with the switch. (l 106) 2 Press the button to switch to manual focus mode. (l 113) 3 Select [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SW] → [EXPAND
  • Panasonic AG-CX8 | Operating Instructions - Page 138
    display Set so enable/disable of peaking display can be switched with a USER button. 1 Switch to manual mode with the switch. (l 106) 2 Press the button to switch to manual focus mode. (l 113) 3 Select [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SW] → [EXPAND
  • Panasonic AG-CX8 | Operating Instructions - Page 139
    Chapter 5 Shooting - Convenient shooting functions Enlarged display and peaking display settings 1 Select the type of display in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SW]. [EXPAND]: [PEAKING]: [EXPAND&PEAKING]: Enables the enlarged display. Enables the peaking display.
  • Panasonic AG-CX8 | Operating Instructions - Page 140
    before the tracking frame goes out or if a different subject is touched. @ NOTE 0 In the following cases, it cannot be used. j When set to manual mode j When set to digital zoom j When using the area mode function j When IR recording is enabled j When super slow recording is enabled 0 In the
  • Panasonic AG-CX8 | Operating Instructions - Page 141
    Chapter 5 Shooting - Convenient shooting functions Switching enable/disable of the hybrid optical image stabilizer function 1 Select the [CAMERA] menu → [SW MODE] → [O.I.S.] → [ON]. 2 Select the [CAMERA] menu → [SW MODE] → [HYBRID O.I.S.] → [ON]. Enable the hybrid optical image stabilizer function
  • Panasonic AG-CX8 | Operating Instructions - Page 142
    Chapter 5 Shooting - Convenient shooting functions Time stamp function You can record the date and time of shooting on the images. 1 Select the information to record in the [RECORDING] menu → [TIME STAMP]. [OFF]: Does not superimpose the date and time. [DATE]: Superimposes only the date. [
  • Panasonic AG-CX8 | Operating Instructions - Page 143
    Chapter 5 Shooting - Convenient shooting functions Digital zoom function ∫ Assigning [D.ZOOM] to the USER button Set so enable/disable of the digital zoom function can be switched with a USER button. 1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [D.ZOOM]. ∫ Using the digital zoom
  • Panasonic AG-CX8 | Operating Instructions - Page 144
    Chapter 5 Shooting - Operation icon screen display Operation icon screen display You can select the scene file or execute the functions assigned to [USER6] through [USER12]. Displaying the operation icon screen 1 Either touch and hold the screen for approximately 2 seconds in the camera recording
  • Panasonic AG-CX8 | Operating Instructions - Page 145
    mode (l 114) Press the button and the USER button assigned to [AWB] to switch white balance to "VAR" (l 118) Set to manual iris mode (l 110) Set [AE LEVEL] to [ON] and set one of iris, gain, or shutter to auto (l 112) Press the USER button assigned to [
  • Panasonic AG-CX8 | Operating Instructions - Page 146
    Chapter 5 Shooting - Multi manual function Displaying the operation icon screen 1 Turn the multidial to display the [ 2 Press the multidial. ICONS]. The operation icon screen is displayed. Adjusting headphone volume
  • Panasonic AG-CX8 | Operating Instructions - Page 147
    Chapter 6 Playback Data including additional information such as image, audio, and meta data that are recorded by single shooting is saved as a clip. Playback, copy, etc., of the clip can be performed on the unit.
  • Panasonic AG-CX8 | Operating Instructions - Page 148
    Thumbnail operation Chapter 6 Playback - Thumbnail operation Thumbnail operation overview A clip is a group of data recorded by a single shooting, which includes additional information such as image, audio, and meta data. The following operations can be performed while viewing the clip thumbnails
  • Panasonic AG-CX8 | Operating Instructions - Page 149
    Chapter 6 Playback - Thumbnail operation 4 Defective clip status* : Displayed when P2 is selected as the recording file format and there is at least one defective P2 clip that may be repaired in the thumbnail screen. : Displayed when P2 is selected as the recording file format and there is at least
  • Panasonic AG-CX8 | Operating Instructions - Page 150
    Chapter 6 Playback - Thumbnail operation 9 Copy selection status This is displayed when the clip is selected. 10 Defective clip*/unknown clip* : This is displayed for a defective P2 clip that may be repaired. : This is displayed for a defective P2 clip that cannot be repaired. : This is displayed
  • Panasonic AG-CX8 | Operating Instructions - Page 151
    Chapter 6 Playback - Thumbnail operation 13 [FRAME RATE] Displays the frame rate for super slow recording. 14 [GAMMA] Displays the gamma of the clip. Displayed when the [SYSTEM] menu → [FILE FORMAT] is set to other than [AVCHD]. Copying clip Clips can be copied between memory cards. (For the CX7
  • Panasonic AG-CX8 | Operating Instructions - Page 152
    Chapter 6 Playback - Thumbnail operation Deleting clips Deletes the clip. 1 Press the button. The thumbnail screen is displayed. 2 Press the button while the thumbnail screen is displayed. The menu is displayed. 3 Select the [THUMBNAIL] menu → [CLIP] → [DELETE] → [SELECT]. The
  • Panasonic AG-CX8 | Operating Instructions - Page 153
    Chapter 6 Playback - Thumbnail operation Restoring clips In following cases, restoration of the clip may be required depending on the condition. It may take some time to restore depending on the error. ≥ When the memory card in the card slot that is flashing is removed while the card 1 access lamp
  • Panasonic AG-CX8 | Operating Instructions - Page 154
    Playing back clips Chapter 6 Playback - Thumbnail operation 0001 0002 0003 00:00:00.00 0004 00:00:16.00 0005 00:00:32.15 0006 00:01:00.17 0007 00:01:24.02 0008 00:01:46.02 0009 00:02:30.20 00:02:53.08 00:03:30.20 1 In the [SYSTEM] menu → [
  • Panasonic AG-CX8 | Operating Instructions - Page 155
    playback may not proceed normally, or may not be possible. (Please check compatibility in the instruction manual of your device.) ≥ Clips recorded with devices other than this unit are not supported by this unit. Adjusting the volume during playback You can adjust the playback volume by operating
  • Panasonic AG-CX8 | Operating Instructions - Page 156
    Chapter 6 Playback - Useful playback function Useful playback function Resume play When the playback of a clip is stopped midway, it will start the playback from the position that stopped the playback when it is played back the next time. 1 Select the [THUMBNAIL] menu → [PLAYBACK] → [RESUME PLAY] →
  • Panasonic AG-CX8 | Operating Instructions - Page 157
    Chapter 6 Playback - Still image recording function Still image recording function One frame of the recorded video can be recorded as a still image. Number of pixels of the still image to be recorded is same as the number of pixels of the recorded video. 1 Select by touching or pressing the
  • Panasonic AG-CX8 | Operating Instructions - Page 158
    Chapter 7 Output and Screen Display This chapter describes the screen displayed on the output video and LCD monitor.
  • Panasonic AG-CX8 | Operating Instructions - Page 159
    4:2:2 10 bit 1920×1080/25.00PsF 4:2:2 10 bit 1280×720/50.00p 4:2:2 10 bit * Factory setting @ NOTE 0 The 3840×2160 output is not supported. 0 User bits are not displayed. 0 [OUT FORMAT] restores the factory settings when the settings of [FREQUENCY] and [REC FORMAT] change and the current setting
  • Panasonic AG-CX8 | Operating Instructions - Page 160
    Chapter 7 Output and Screen Display - Output format Format that can be output from the terminal The format that can be output from the terminal differs with following combination of the settings. ≥ [SYSTEM] menu → [FREQUENCY] ≥ [SYSTEM] menu → [FILE FORMAT] ≥ [SYSTEM] menu → [REC
  • Panasonic AG-CX8 | Operating Instructions - Page 161
    following conditions. j A memory card has not been inserted. j The memory card cannot be recognized. j (For the CX10 ) The tally lamp is not instructed to illuminate in red/green via network, and the [NETWORK] menu → [NETWORK FUNC] → [NDI|HX] is set. The following indicators are displayed in
  • Panasonic AG-CX8 | Operating Instructions - Page 162
    to the output from the terminal. ≥ [SDI]*1: Pause instruction is output to the output from the terminal. ≥ [ HDMI]: Recording instruction is output to the output from the terminal. ≥ [HDMI]: Pause instruction is output to the output from the terminal. 8 Special
  • Panasonic AG-CX8 | Operating Instructions - Page 163
    Chapter 7 Output and Screen Display - Screen status display 18 ND filter Displays the transmittance of the selected ND filter. ≥ [ND1/64]: Reduces the amount of light entering the MOS sensor to 1/64. ≥ [ND1/16]: Reduces the amount of light entering the MOS sensor to 1/16. ≥ [ND1/4]: Reduces the
  • Panasonic AG-CX8 | Operating Instructions - Page 164
    set to [mm/feet]. Displays in meter unit when set to [mm/m]. ≥ [AF]: Displayed when set to auto focus mode. ≥ [MF]: Displayed when set to manual focus mode. 45 Audio monitor volume adjustment Displayed when the zoom lever (on the grip) or the multidial is used to adjust the volume of
  • Panasonic AG-CX8 | Operating Instructions - Page 165
    Chapter 7 Output and Screen Display - Screen status display Screen display during playback 1 2 3 TCR 12:59:59:23 A001C001 6 4 CH1 CH2 5 1 Time code display Each time you press the USER button assigned to [COUNTER], the display changes in the order [TCR UBR CLIP no display. 2 Clip name
  • Panasonic AG-CX8 | Operating Instructions - Page 166
    (green) 33 Error display of auto white balance 34 Error display of auto black balance 35 Remote control status in an IP connection 36 Multi manual function 37 Color temperature 38 Optical image stabilizer function 39 Scene file name Camera image screen
  • Panasonic AG-CX8 | Operating Instructions - Page 167
    status of the memory card that is displayed are following types. ≥ [NO CARD]: Memory card is not inserted. ≥ [UNSUPPORTED]: Memory card is not supported. ≥ [FORMAT ERROR]: Memory card cannot be used. (Format error) ≥ [PROTECTED]: It is write protected. (The write-protection switch of the memory card
  • Panasonic AG-CX8 | Operating Instructions - Page 168
    Chapter 7 Output and Screen Display - Screen status display AUDIO screen Displays the audio input/output settings and the audio level meter. [HANDLE] Item [HANDLE STATUS] [AUDIO] [SOURCE] [CH1] to [CH2] [LEVEL] [LIMITER] [LOWCUT] Audio lebel meter [AUDIO OUT] [CH1] to [CH2] [CH1] to [CH2] [
  • Panasonic AG-CX8 | Operating Instructions - Page 169
    Chapter 8 Connecting to External Devices This chapter describes the external devices that can be connected to the unit.
  • Panasonic AG-CX8 | Operating Instructions - Page 170
    Chapter 8 Connecting to External Devices - Connecting with headphones and TV/monitor Connecting with headphones and TV/monitor Headphones Headphones (commercially-available) can be connected to the headphone terminal (3.5 mm (0.14q) diameter stereo mini jack).  A Headphone terminal @ NOTE 0 Audio
  • Panasonic AG-CX8 | Operating Instructions - Page 171
    connect last to the terminal on this unit. Connecting first to the terminal on this unit may cause a malfunction. 0 VIERA Link is not supported on the unit. Note that the VIERA Link of other device may not properly operate when connected to the VIERA Link compatible device with a HDMI
  • Panasonic AG-CX8 | Operating Instructions - Page 172
    to use the unit as a card reader for the memory card. ≥ This unit supports USB2.0. Connecting to a computer    A USB cable (commercially-available) B in the computer or the SD card reader/writer you are using may not support the memory card. 0 When the unit is connected to a computer, it
  • Panasonic AG-CX8 | Operating Instructions - Page 173
    operation is performed while accessing the memory card.) Operating environment (mass storage) ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computer's cannot be used. ≥ The USB equipment operates with the driver installed as standard in the OS
  • Panasonic AG-CX8 | Operating Instructions - Page 174
    Chapter 8 Connecting to External Devices - Remote operation by iPhone/iPad or Android terminal Remote operation by iPhone/iPad or Android terminal This unit can connect to wireless LAN devices via a network. Some of the functions can be remotely operated by connecting the unit with iPhone/iPad or
  • Panasonic AG-CX8 | Operating Instructions - Page 175
    Chapter 9 Network Connection This chapter describes how to use the unit by connecting to a network.
  • Panasonic AG-CX8 | Operating Instructions - Page 176
    Network connection Chapter 9 Network Connection - Network connection (For the CX7 / CX8 ) This unit is equipped with wireless LAN. It can connect to networks via wireless LAN. (For the CX10 ) This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired LAN. To use
  • Panasonic AG-CX8 | Operating Instructions - Page 177
    LAN functionality. For the operations and settings of the device you are using, such as iPhone/iPad or Android handset, refer to the operating instructions for your device. ∫ This unit is WPS-compatible WPS (Wi-Fi Protected Setup™) is a function that allows you to easily set up a connection with
  • Panasonic AG-CX8 | Operating Instructions - Page 178
    the password (encryption key). For details, refer to the operating instruction of the iPhone/iPad or Android terminal. ≥ Factory setting: the setting screen termination may take some time due to the restart of the network service after the setting is changed. 0 Some of the items not included in the
  • Panasonic AG-CX8 | Operating Instructions - Page 179
    PROPERTY] and [WLAN IPv4 SETTING] when set to either [INFRA(SELECT)] or [INFRA(MANUAL)]" (l 179). 4 In [NETWORK] menu → [WLAN PROPERTY] and [WLAN IPv4 due to the restart of the network service after the setting is changed. 0 ENCRYPTION in WEP is not supported. 0 Some items cannot be set depending
  • Panasonic AG-CX8 | Operating Instructions - Page 180
    computer. For more information, refer to the operating instructions or help for the connection device. ∫ Setting items due to the restart of the network service after the setting is changed. 0 set to [CLIENT], entry of the DNS value manually may be required. When invalid DNS value is entered
  • Panasonic AG-CX8 | Operating Instructions - Page 181
    Chapter 9 Network Connection - Network settings Specifying the network settings using the settings tool [CX10] Unit settings 1 From the [NETWORK] menu → [UTILITY] → [EASY IP SETTING], select anything other than [DISABLE]. 2 Select the [NETWORK] menu → [UTILITY] → [EASY IP CAMERA TITLE]. 3 Enter the
  • Panasonic AG-CX8 | Operating Instructions - Page 182
    address assigned to the unit can be checked by clicking [Search] of EASY IP Setup Software when using the DHCP server. 0 The unit does not support the IPv6 setting due to EASY IP Setup Software. 0 Allow access to all of the ports for UDP when implementing a firewall (including software). 0 Some of
  • Panasonic AG-CX8 | Operating Instructions - Page 183
    Chapter 9 Network Connection - Connecting to the iPhone/iPad or Android terminal Connecting to the iPhone/iPad or Android terminal The unit can be operated from the iPhone/iPad or Android terminal. Unit settings Specifying the network settings Specify the network settings. (l 178) Setting the
  • Panasonic AG-CX8 | Operating Instructions - Page 184
    HC ROP app from the Google Play Store. @ NOTE 0 For information such as the supported OS of the HC ROP app, refer to the App Store or the Google Play Connecting to the HC ROP app Connect to the unit following the HC ROP app guide. @ NOTE 0 The unit cannot connect with the HC ROP app while the menu
  • Panasonic AG-CX8 | Operating Instructions - Page 185
    Streaming function Chapter 9 Network Connection - Streaming function You can perform streaming of audio and video currently shot with the unit over a network (wired LAN/wireless LAN). Streaming can be performed using the unit, application software of a device connected via a network, or a server
  • Panasonic AG-CX8 | Operating Instructions - Page 186
    start streaming from the application software, please see the manual for the application software. 0 Streaming stops when performing . Streaming with multicast One streaming can be distributed to multiple receivers via supported router, etc., when the multicast function is used. 1 Select the
  • Panasonic AG-CX8 | Operating Instructions - Page 187
    key is required with RTMP, but the stream key may be contained as a part of the path depending on the service. For details, refer to the manual for each streaming service. Referring to the memory card for the destination of streaming 1 Insert the memory card with the destination information saved
  • Panasonic AG-CX8 | Operating Instructions - Page 188
    Chapter 9 Network Connection - Streaming function Stopping streaming of video 1 Select the [NETWORK] menu → [STREAMING] → [START] → [OFF]. Entering the setting using the setting tool Installing software Download and expand the P2 Network Setting software for Windows from the following website. https
  • Panasonic AG-CX8 | Operating Instructions - Page 189
    is required to use the NDI|HX function. For details, refer to the website of NewTek. 0 For details of each operation, refer to the operating instruction of the NDI|HX compatible switcher. 0 The following functions cannot be used when the NDI|HX function is enabled. Some of the menu items related
  • Panasonic AG-CX8 | Operating Instructions - Page 190
    |HX in the [NETWORK] menu → [NETWORK FUNC]. Streaming with multicast One streaming can be distributed to multiple NDI|HX compatible switchers via supported router, etc., when the multicast function is used. 1 Select the [NETWORK] menu → [NDI|HX] → [MULTICAST] → [ENABLE]. 2 Select the [NETWORK] menu
  • Panasonic AG-CX8 | Operating Instructions - Page 191
    Chapter 10 Notes Maintenance of the unit or frequently asked questions are described.
  • Panasonic AG-CX8 | Operating Instructions - Page 192
    , but this is because the unit is using MOS for the image sensor. This is not a malfunction. Power supply ∫ What is the power supply voltage supported by the supplied AC adaptor? ≥ AC 100 V-240 V ∫ Can the supplied AC adaptor be used while the battery is attached? ≥ It can be used. The
  • Panasonic AG-CX8 | Operating Instructions - Page 193
    Auto focus has trouble focusing under certain conditions. In this case, the manual focus mode can be performed. ≥ This unit does not support hot swap playback. Connections with external devices card) that you inserted. Refer to the operating instructions of the device for details. ∫ When connected by
  • Panasonic AG-CX8 | Operating Instructions - Page 194
    an error message will appear on the computer. ≥ To disconnect the USB cable safely, double-click the icon in the task tray and follow the instructions on the screen. Others ∫ Which lens filters can be attached? ≥ 62 mm (2.44q) diameter filters can be attached. If AVCHD scenes do not change smoothly
  • Panasonic AG-CX8 | Operating Instructions - Page 195
    alarm sounds. ≥ The power is turned off in approximately 5 seconds. ≥ Turn on the power again and check recording and playback operations. If the problem persists, consult the dealer. ≥ The power turns off approximately 1 minute later. ≥ Stop the use immediately when the fan has stopped, and consult
  • Panasonic AG-CX8 | Operating Instructions - Page 196
    OR CHECK CARD ] The memory card cannot be recognized properly because ≥ Check the memory card that is inserted. a recording medium which is not supported has been ≥ Insert the memory card again if displayed when inserting inserted or there is dirt on the terminal of the memory card
  • Panasonic AG-CX8 | Operating Instructions - Page 197
    is performed automatically after this. [CANNOT RECORD INCOMPATIBLE CONTROL DATA.] The version of the management information on the memory card is not supported. ≥ Match the device and content versions. [CANNOT SET.] This cannot be set. ≥ Perform the setting after making it possible to set
  • Panasonic AG-CX8 | Operating Instructions - Page 198
    failed. ≥ Check the memory card. Due to an OS non-compatible error, 5 minutes has elapsed ≥ Confirm if the OS in use is supported by the unit. until the service mode connection is established. The unit tried to protect or delete a clip on a memory card that has been locked. The unit tried to
  • Panasonic AG-CX8 | Operating Instructions - Page 199
    Chapter 10 Notes - Recording function that cannot be used simultaneously Recording function that cannot be used simultaneously Depending on the recording function that is set, there are recording functions that cannot be used simultaneously. ≥ Meaning of the symbols used in the table are as follows
  • Panasonic AG-CX8 | Operating Instructions - Page 200
    the memory card that stores the update file into card slot 1, and select the [OTHERS] menu → [INFORMATION] → [UPDATE]. For update method, refer to the support desk at the following website: https://pro-av.panasonic.net/en/products/ag-cx10/index.html 0 When updating the firmware, use the AC adaptor
  • Panasonic AG-CX8 | Operating Instructions - Page 201
    dirt, wipe with a cloth soaked in kitchen detergent diluted with water, and then with a dry cloth. ≥ When using a chemical dust cloth, follow the instructions that came with the cloth. Cautions for storage Remove the battery from the main unit when storing. Store them in a place where humidity is
  • Panasonic AG-CX8 | Operating Instructions - Page 202
    Chapter 11 Specification This chapter describes the specifications of this product.
  • Panasonic AG-CX8 | Operating Instructions - Page 203
    Dimensions Main unit Chapter 11 Specification - Dimensions 93 mm (3.66″) 129 mm (5.08″) When the handle unit is attached (supplied) 257 mm (10.1″) 159 mm (6.26″) 129 mm (5.08″) 257 mm (10.1″) - 203 -
  • Panasonic AG-CX8 | Operating Instructions - Page 204
    Specifications General Power 7.28 V 12 V (when battery is used) (when the AC adaptor is used) Power consumption 22.9 W (Charging) CX7 14.4 W (When the LCD monitor is used) CX8 / CX10 15.5 W (When the LCD monitor is used) Ambient operating temperature Ambient operating humidity Mass (Weight)
  • Panasonic AG-CX8 | Operating Instructions - Page 205
    Super slow recording Minimum illuminance of subject Digital zoom Built-in LED light (When using the handle unit) Lens hood Chapter 11 Specification - Specifications ≥ [SYSTEM] menu → [FREQUENCY] → [59.94Hz] When the number of recording pixels is 1920×1080 (FHD) Recording frame rate 120 fps, slow
  • Panasonic AG-CX8 | Operating Instructions - Page 206
    signal Audio compression format Headroom Streaming Video compression format Video resolution Streaming method Frame rate Bit rate Audio compression format Supported protocol Chapter 11 Specification - Specifications CX7 / CX8 CX10 When using 64 GB SDXC memory card, with [FILE FORMAT] set to
  • Panasonic AG-CX8 | Operating Instructions - Page 207
    00p, 59.94i, 50.00i, 29.97p, 25.00p, 23.98p 1280×720: 59.94p, 50.00p 720×480: 59.94p 720×576: 50.00p Supports stereo microphone 3.5 mm (0.14q) diameter stereo mini jack ×1 XLR×2, 3-pin Input high impedance, // (Switched with / switch) ≥ : 4 dBu/0 dBu (switched
  • Panasonic AG-CX8 | Operating Instructions - Page 208
    Chapter 11 Specification - Specifications Handle unit Power consumption Maximum approx. 3.1 W (when connected to the camera) Mass (Weight) External dimensions (W×H×D) Approx. 305 ] (Approx. 0.67 lbs.) (main part of the handle unit only, excluding microphone holder and microphone holder mounting
  • Panasonic AG-CX8 | Operating Instructions - Page 209
    recording...135 Iris...110 K Knee function ...124 L LCD monitor ...52 Status display 161 Lens cover ...31 Lens hood ...30 Level gauge ...143 M Manual focus ...113 Matrix function...123 Memory card ...38 Folder structure 43 Format...40 Insert...40 Recording time 41 Remove ...40 Status ...39 Write
  • Panasonic AG-CX8 | Operating Instructions - Page 210
    Index S Safety zone marker 137 Scene files ...102 Screen display ...56 Setup file ...104 Shooting ...106 Simultaneous recording 132 Skin tone function 123 Specifications...204 Still image recording function 157 Streaming function 185 Super gain ...111 Super slow...126 Switching screen 57 T
  • Panasonic AG-CX8 | Operating Instructions - Page 211
    Panasonic Corporation Web site: http://www.panasonic.com © Panasonic Corporation 2020
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
Operating Instructions
Memory Card Camera-Recorder
Model No.
AG
-
CX7
AG
-
CX8
AG
-
CX10
Please read these instructions carefully before using this product, and save this manual for future use.
W0220SQ0 -FJ
P
DVQP2236ZA
ENGLISH