Panasonic AG-UX90NTSC AG-UX90 Operating Instructions
Panasonic AG-UX90NTSC Manual
 |
View all Panasonic AG-UX90NTSC manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic AG-UX90NTSC manual content summary:
- Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 1
Operating Instructions Memory Card Camera-Recorder Model No. AG-UX90 Please read these instructions carefully before using this product, and save this manual for future use. P PJ F1016YA0 ENGLISH DVQP1146ZA - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 2
such as vases, on this unit. ≥ Use only the recommended accessories. ≥ Do not remove covers. ≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel. CAUTION! To reduce the risk of fire, electric shock or product damage, ≥ Do not install or place this unit in a bookcase - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 3
block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 4
Party: Panasonic Corporation of North America Two Riverfront Plaza Newark NJ07102 Support contact: 1-800-524-1448 This device complies with Part 15 of and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 5
∫ Concerning the battery Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 6
, or dishwashing liquid may alter the camera body or peel the surface finish. Do not use these solvents. ≥ When using a chemical dust cloth, follow the instructions that came with the cloth. When you are not going to use the unit for an extended time ≥ When storing the unit, it is recommended - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 7
, do not use it in direct contact with the skin for a long period of time. ≥ When using this unit for a long period of time, use a support such as a tripod. Low temperature burns may result if any high temperature part of this unit is in direct contact with the skin for a long - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 8
start/stop button in the following screen for three seconds. Screen to delete the SD card data is displayed, so select [YES] and follow the instruction on the screen. ≥ The customer is responsible for the management of the data in the SD card. LCD monitor/viewfinder ≥ When the LCD screen is - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 9
MP4 and AVCHD*. (l 43, 148) * AVCHD Progressive (1080/60p) supported. MOV and MP4: These recording methods are suitable for editing images. Audio is any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 10
/MP4 scene(s)". ≥ Scene(s) recorded with [REC MODE] set to [AVCHD]: "AVCHD scene(s)". ≥ Pages for reference are indicated by an arrow, for example: l 00 ≥ These operating instructions are designed for use with models AG-UX90P/PJ. Such as screen illustrations are as an example AGUX90PJ. - 10 - - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 11
pictures by date 112 Editing Before recording 42 Selecting a media to record 42 Formatting media 43 Recording motion picture 43 Switching between Auto and Manual Mode 45 Adjusting the Picture Quality 47 Using the zoom 49 Image Stabilizer Function 51 Focus 53 One Push AF 56 Push AF 57 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 12
ROP application 131 Before connection 132 Connecting this unit and an iPad.......... 135 Operations during AG ROP application connection 139 Troubleshooting 193 About recovery 197 Updating the firmware incorporated into the unit 197 About copyright 198 Recording functions that cannot be used - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 13
Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Battery pack*1 Eye cup (l 22) Battery charger AC adaptor AC cable Microphone holder (l 23) Microphone holder mounting screws (l 23) 12 mm length (0.47 q) (2 screws) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 14
Optional accessories Some optional accessories may not be available in some countries. Product numbers correct as of September 2016. These may be subject to change. Unidirectional microphone (AG-MC200G) Battery pack (VW-VBD58/AG-VBR59/AG-VBR89/AG-VBR118) Battery charger (AG-B23/AG-BRD50) LED video - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 15
card It is possible to record motion pictures and still pictures to the SD card using a variety of recording functions. ≥ This unit supports relay/simultaneous recording using double card slots. Linking to external devices USB Device Mode Transfer data (files) to perform nonlinear editing on another - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 16
. Connecting the HDMI cable to the connector of this unit first may result in malfunction. Remote operations with an iPad Attaching a wireless module that support this unit (l 132) to the USB HOST terminal of this unit allows you to connect to a wireless LAN network. You can perform the following - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 17
Preparation Names and Functions of Main Parts 1 2 3 45 6 7 8 9 10 11 12 13 15 19 16 20 14 17 18 21 22 23 1 USB HOST terminal (l 126, 131) 2 USB DEVICE terminal (l 123) 3 HDMI OUT connector [HDMI] (l 118) 4 Handle 5 Lens hood release button (l 21) 6 Audio input terminal 1 (XLR 3 pin) [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 18
of 5.5 mm (0.22 q) or more may damage the unit. 25 Eyepiece corrector lever (l 37) 26 ND filter switch [ND FILTER] (l 100) 27 Focus auto/Manual/¶ switch [FOCUS A/M/¶] (l 53) 28 Iris button [IRIS] (l 65) 29 FOCUS ASSIST button (l 57) 30 User 1 button [USER1] (l 81) 31 User 2 button [USER2] (l 81) 32 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 19
48 49 50 56 57 58 59 60 61 62 51 52 63 64 65 53 54 55 66 67 68 69 70 48 SD Card slot cover (l 31) 49 Access lamp (card 1) (l 31) 50 Card slot 1 (l 31) 51 Access lamp (card 2) (l 31) 52 Card slot 2 (l 31) 53 INPUT1 / INPUT2 switches (l 72) 54 CH1 SELECT/CH2 SELECT switches (l 72) 55 AUDIO - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 20
71 72 73 74 75 76 77 78 79 80 81 71 Accessory shoe 72 Sub zoom lever (l 49, 159) ≥ This lever functions in the same manner as the zoom lever. ≥ The zoom speed is controlled with this lever in a way different from the way it is controlled with the zoom lever. (l 50) 73 Zoom lever [T/W] (In Recording - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 21
∫ Attaching/detaching the lens hood (How to detach the lens hood) While pressing and holding the lens hood release button, rotate the lens hood in the direction of the arrow to detach it. A Lens hood release button (How to attach the lens hood) B Mounting mark 1 Fit the lens hood into this - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 22
∫ Adjust the length of the hand strap so that it fits your hand. Adjust the hand strap according to the size of your hand. ≥ If you find it difficult to fasten the buckle B, move the pad A forward, and fasten the buckle B again. 1 Open the buckle. 2 Pull the end of the belt. ∫ Attaching the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 23
∫ Attaching the front microphone ≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone (AG-MC200G: optional) can be attached. Check in advance whether the microphone you wish to use can be attached. 1 Attach the microphone holder to the microphone holder attachment part. ≥ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 24
-VBR59/AG-VBR89/AG-VBR118. ≥ The AG-VBR59/AG-VBR89/AG-VBR118 supports quick charging. It has been found that counterfeit battery packs which look very similar This unit can charge two battery packs simultaneously and supports quickcharging batteries. CHARGE indicators [CHARGE 1/CHARGE 2] Indicate - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 25
and the CHARGE indicator to light. If the CHARGE indicator does not light after 10 seconds, insert the battery again. ≥ If two batteries that support quick charging are inserted, priority will be given to the battery inserted in the CHARGE 1 slot, and the battery inserted in the CHARGE 2 slot - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 26
Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. ≥ Insert the battery until it clicks and locks. Removing the battery Make sure that the power switch is set to OFF and the status indicator is turned off, and then remove by holding onto it - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 27
Charging and recording time Charging/Recording time Battery model number Supplied battery/ AG-VBR59 (optional) AG-VBR89 (optional) AG-VBR118 (optional) VW-VBD58 (optional) Voltage/Capacity (minimum) 7.28 V/5900 mAh 7.28 V/8850 mAh 7.28 V/11800 mAh 7.2 V/5800 mAh Charging time 3 h 20 min 4h 4 h 40 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 28
exhausted. Charge the battery. How to read the indicator An approximate guide of the charging progress is indicated by the flashing position of the 75% 75% to 100% ≥ The display of the indicator is an approximate guide. When the battery pack is connected to the video camera or the charger, refer - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 29
Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device. ≥ Do not use - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 30
Preparation Preparation of SD cards The unit can record motion pictures or still pictures to an SD card. Cards that you can use with this unit ≥ The cards that you can use are correct as of September 2016. ≥ We recommend that you use a Panasonic Memory Card. Card type Capacity SDHC Memory Card - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 31
Inserting/removing an SD card When using an SD card for the first time, it is necessary to format the SD card. (l 43) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp A - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 32
Preparation Turning the unit on/off Set the power switch to ON while pressing the lock release button B to turn on the unit. ON OFF To turn off the unit Set the power switch to OFF while pressing the lock release button. The status indicator goes off. A The status indicator lights on. ≥ To - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 33
Preparation Using the LCD monitor/Viewfinder The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is extracted. The viewfinder is turned on when the LCD monitor is retracted. Switching between the LCD monitor and viewfinder displays Select the menu. (l 41) MENU : [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 34
Using the LCD monitor 1 Extract the LCD monitor in the direction as indicated in the figure. ≥ Hold the LCD monitor extract part A, and extract the LCD monitor until it clicks into position. 2 Rotate to the position that is easy to view. To retract the LCD monitor Retract as shown in the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 35
How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. ∫ Touch Touch and release the touch screen to select icon or picture. ≥ Touch the center of the icon. ≥ Touching the touch screen will not operate while you are touching another part of - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 36
LCD monitor adjustment ≥ These settings will not affect the images actually recorded. [POWER LCD] This makes it easier to view the LCD monitor in bright places including outdoors. Select the menu. (l 41) MENU : [DISP SETUP] # [POWER LCD] # [+1] (Makes brighter)/[0] (Normal)/[-1] (Makes less bright) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 37
Viewfinder adjustment ≥ These settings will not affect the images actually recorded. Adjusting the field of view It adjusts the field of view to show the image on the viewfinder clearly. 1 Adjust the viewfinder to suit your vision so that you can see the display images clearly. ≥ Be careful - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 38
[EVF COLOR] The recording images or playback images on the viewfinder can be selected between color/black and white. Select the menu. (l 41) MENU : [DISP SETUP] # [EVF COLOR]# [ON] or [OFF] [ON]: [OFF]: Displayed in color Displayed in black and white ≥ If you adjust the [COLOR] setting in [EVF - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 39
When this unit is turned on, the message [SET TIME ZONE AND DATE/TIME] may appear. To make these settings, select [YES], and follow the instructions from Step 2-3 of the time zone setting procedure. Time zone Time difference from the Greenwich Mean Time can be set. 1 Select the menu. (l 41) MENU - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 40
∫ Time zone table Time difference Region 0:00 London, Casablanca s1:00 Azores s2:00 Fernando de Noronha s3:00 Rio de Janeiro, Sao Paulo, Buenos Aires s3:30 Newfoundland s4:00 s4:30 s5:00 s6:00 s7:00 Manaus, La Paz Caracas Toronto, New York, Miami, Lima Chicago, Houston, Mexico City Denver, - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 41
Preparation Using the menu screen ≥ You can also select menu items by operating the jog dial. (l 102) MENU 1 MENU Press the MENU button . 2 Touch the top menu A. 3 Touch the submenu B. ≥ Next (Previous) page can be displayed by touching / . 4 Touch the desired item to enter the setting. 5 Touch [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 42
Recording Before recording ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ Hold the eye cup of the viewfinder as close as possible to your eye. ≥ Adjust the angle of the LCD monitor according to the position in which the unit is - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 43
Formatting media If you use the SD cards for the first time for recording with this unit, format the cards. Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC etc. (l 122) ≥ When using two SD - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 44
∫ Screen indications in the Recording Mode TC 00:00:0000 R 1h20m MAIN R 1h20m 50M 59.94p TC 00:00:00.00 / (White) Counter display (l 76) Card slot number R 1h20m MAIN Approximate remaining recordable time ≥ When the remaining time is less than 1 minute, R 0h00m flashes red. Card slot selected - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 45
unit operates according to the [AUTO SW] menu settings. ≥ When the following settings are automatically adjusted in Auto Mode, the corresponding Manual Mode settings are canceled: j Focus (l 53) j Iris (l 65) j GAIN (l 67) j Shutter speed (l 70) ∫ To enable/disable auto switch functions You can - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 46
of this unit automatically adjusts the White Balance according to the lighting condition. If Auto Tracking White Balance does not work correctly, switch to Manual Mode first, and then adjust the White Balance. (l 61) Auto Focus The unit focuses automatically. ≥ Auto Focus does not work correctly in - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 47
. It effectively softens or sharpens images, but in some cases, the whole image may become rough due to emphasized noise and edges. To avoid such problems, it is necessary not to add this effect on parts where emphasizing is not needed and keep the details of the parts. ∫ Menu item [MASTER - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 48
Black control function This function sets the black level that is to be the reference of luminance. ∫ Menu item [MASTER PED] (l 144) Gamma function This function optimizes the tone of images. ∫ Menu item [GAMMA MODE]: [BLACK GAMMA]: Sets the optimal tone and contrast of images for the scene to - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 49
Recording Using the zoom The unit can deliver a maximum optical zoom of 15k. ≥ (When the picture size of [REC FORMAT] (l 148) is 1920k1080 or below) It can zoom up to approx. 25k when the [i.Zoom] is set to [ON]. (l 94) ≥ You can check the zoom magnification on-screen, displayed as a value between - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 50
Using the i.Zoom When [i.Zoom] is set to [ON], you can zoom in while maintaining the beauty of high-definition picture quality up to a magnification of approx. 25k. ≥ Set [REC FORMAT] to a setting with a picture size of 1920k1080 or below. (l 148) Select the menu. MENU : [SW SETUP] # [i.Zoom] # [ON] - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 51
Recording Image Stabilizer Function Use the Image Stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer. Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer. 1 Register [O.I.S.] to a USER button. (l - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 52
∫ Blur amplitude You can adjust the performance of camera shake correction according to the level of camera shake during recording. Select the menu. MENU : [SW SETUP] # [BLUR AMPLITUDE] # desired setting [1]/[2]/[3]/[4]/[5] ≥ If you set a smaller value, correction performance against minor camera - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 53
Focus. FOCUS A M ʿ A FOCUS A/M/¶ switch B PUSH AUTO button C Focus ring PUSH AUTO ≥ Switch to Manual Mode. (l 45) 1 Set the FOCUS A/M/¶ switch to [M] to enable Manual Focus. ≥ It will switch to MF from AF. 2 Adjust the focus by rotating the focus ring. ≥ The focus value can be set - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 54
∫ To change the way you adjust focus with the focus ring Select the menu. MENU : [SW SETUP] # [FOCUS RING DRIVE] [SPEED]: [COARSE]: [FINE]: Adjusts the focus value according to the speed at which the focus ring is rotated. Adjusts the focus value according to the rotational position of the focus - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 55
an intervening object or the background into focus. 3 Touch [EXIT] to complete the setting. ≥ This function is not available in the following cases: j In manual focus mode (l 53) j In Variable Frame Rate Mode (l 92) ≥ When a faster [AF SPEED] value is selected, focus mechanism noise will be more - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 56
AUTO button. ≥ Auto Focus will be activated and the camera will perform high-speed focusing until the image is focused. ≥ The focus setting returns to Manual Focus Mode once the image is focused or a certain time has elapsed. ≥ You can also use One Push AF with the USER button to which - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 57
Push AF If you press and hold the PUSH AUTO button, Manual Focus will be temporarily switched to Auto Focus. ≥ Set this unit to Manual Focus. (l 53) Press and hold the PUSH AUTO button. ≥ The focus position will be automatically adjusted for the subject at the center of the screen. ≥ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 58
Using Focus Assist ≥ Switch to Manual Focus Mode. (l 53) Press the FOCUS ASSIST button or the USER button to which [FOCUS ASSIST 1] or [FOCUS ASSIST 2] is registered. ≥ You can also use - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 59
∫ To change the peaking settings If you set Focus Assist to ON by following either of the procedures below, in-focus portions are highlighted with color (peaking). j Setting the menu item [FOCUS ASSIST 1] to [PEAKING] or [BOTH] and pressing the FOCUS ASSIST button or the USER button to - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 60
(Notes on the peaking of Focus Assist) ≥ When EVF/LCD detail is enabled, Focus Assist is canceled. (l 54) (Notes on the magnified display of Focus Assist) ≥ Some information on the screen disappears when the screen is magnified. ≥ In the following cases, the screen is not magnified during Focus - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 61
not guaranteed to indicate an exact value. Use the indicated value only as a guide. 1 Jog dial 2 WHITE BAL button ≥ Register [AWB] (Auto White (l 80) This function is registered to the USER9 button by default. ≥ Switch to Manual Mode. (l 45) 1 Press the WHITE BAL button to switch to [Ach], [Bch], - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 62
About White Balance modes Mode ATW (ATW)*1 LOCK (ATW Lock)*2 P3200K (P3200K) P5600K (P5600K) VAR (VAR) Ach (Ach) Bch (Bch) Settings It will automatically adjust in accordance with the recording condition. It will lock the setting for ATW. (l 63) Preset value for studio/indoor recording (halogen - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 63
Customizing ATW for various recording conditions You can customize the ATW settings for various recording conditions by adjusting the settings of [ATW TARGET R] and [ATW TARGET B] individually. ∫ Fine-adjusting the color balance of ATW 1 Select the menu. MENU : [SW SETUP] # [ATW TARGET R] or [ATW - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 64
and 15000K. ≥ Use the jog dial to change the settings. ≥ Switch to Manual Mode. (l 45) 1 Set the White Balance mode to [VAR]. (l 61) The set value is not guaranteed to be an exact value. Use it only as a guide. To set the White Balance in accordance to the recording scene ≥ Register [AWB] (Auto - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 65
value B Auto iris icon* * It is displayed in Auto Iris Mode. IRIS 1 IRIS button 2 Iris ring ≥ Switch to Manual Mode. (l 45) 1 Press the IRIS button to switch to Manual Iris Mode. ≥ disappears. 2 Adjust the iris by rotating the iris ring. Iris value: CLOSE !# (F11 to F3.0) !# OPEN ≥ Value - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 66
Customizing Auto Iris motion settings for various recording conditions You can customize Auto Iris motion settings for various recording conditions by adjusting the settings of [AUTO IRIS LEVEL] and [AUTO IRIS LEVEL EFFECT] individually. ∫ Adjusting brightness during the Auto Iris Mode 1 Select the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 67
the settings. 0dB GAIN 1 Jog dial 2 GAIN button A Gain value ≥ In Auto Gain Mode, "AGC" is displayed; in Manual Gain Mode, the gain value is displayed in dB. B [GAIN] ≥ Switch to Manual Mode. (l 45) 1 Press the GAIN button to switch to [LOW GAIN], [MID GAIN], or [HIGH GAIN]. ≥ The - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 68
to set the gain value to 33 dB or 36 dB. ≥ Please refer to page 80 for details about setting the USER button. ≥ Switch to Manual Mode. (l 45) Press the USER button to which [SUPER GAIN] is registered or touch the applicable USER button icon. ≥ To cancel Super gain, press the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 69
to this mode by selecting menu items as follows: j [SYSTEM MODE] # [LOW LIGHT MODE] (l 151) ≥ This function is not available in the following cases: j In manual mode j During Freeze Frame (l 87) j When this unit is connected to the AG ROP application (l 135) ≥ This mode is canceled if one of the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 70
display ≥ This is displayed in Auto Shutter Mode. C [SHUTTER] SHUTTER ヴユヵ 1 SHUTTER button 2 Jog dial ≥ Switch to Manual Mode. (l 45) 1 Press the SHUTTER button to switch to Manual Shutter Mode. 2 Adjust the shutter speed by rotating the jog dial. ≥ To return to Auto Shutter Mode, press - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 71
∫ Shutter speed guide for fast moving subjects Refer to the table below to reduce afterimages that appear when playback is paused. Subject Shutter speed Golf or not be able to keep up with changes in the image. In such a case, set the iris, focus, and White Balance mode to manual settings. - 71 - - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 72
Recording Audio Input This unit can record audio in 2 ch. It is possible to switch between built-in microphone, external microphone, or connected audio equipment for each channel. ∫ About audio recording methods The audio recording method varies depending on the [REC MODE] setting. (l 148) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 73
2 Use INPUT1 or INPUT2 switches to switch the connected audio input signal. LINE*1: Audio equipment is connected MIC*2: An external microphone is connected +48V*2: When using a phantom microphone (which requires a power supply of +48 V) *1 The input level varies depending on the [INPUT1 LINE LEVEL] - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 74
you leave the setting at [+48V]. ≥ This unit is turned off when a problem occurs with the +48 V power supply. ≥ The battery will discharge faster [AUTO]: Adjusts the level automatically. [MANUAL]: Adjusts the level manually. 2 (If you have set to [MANUAL]) Adjust the input level operating the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 75
noise. For audio channel 1, select [AUDIO ALC CH1]: for audio channel 2, select [AUDIO ALC CH2]. 1 Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. (l 74) 2 Select the menu. MENU : [AUDIO SETUP] # [AUDIO ALC CH1] or [AUDIO ALC CH2] # desired setting [ON]: [OFF]: Enables ALC, allowing you to - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 76
Recording Counter display You can change a counter display that indicates how much time has elapsed during recording or playback. COUNTER A COUNTER button B RESET button RESET Press the COUNTER button to switch the counter display. ≥ The display will be switched in the following order: Time - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 77
[DF MODE] Select the compensation mode for the time code. Select the menu. MENU : [RECORD SETUP] # [DF MODE] # desired setting [DF]: [NDF]: Time code is compensated in accordance with the actual time. It is mainly used for broadcasting such as TV programs. It will not compensate the time code. ( - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 78
[TC PRESET] You can set the initial time code. 1 Select the menu. MENU : [RECORD SETUP] # [TC PRESET] 2 Touch the item to set and change with / . ≥ It will be set to 00h00m00s00f when the RESET button is pressed. ≥ "h" is an abbreviation for hour, "m" for minute, "s" for second and "f" for frame. 3 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 79
Setting the Recording Counter Recording Counter will display the recording time in seconds. 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL])) SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE])) [REC COUNTER] Select the counting method during the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 80
Recording USER button Each of the USER button can register one function from the 40 available functions. ≥ There are 9 USER buttons (USER1 to 9) on the main body and 4 USER button icons (USER10 to USER13) displayed on the LCD monitor. Setting the USER button 1 Select the menu. MENU : [USER SW] # [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 81
Using the USER button To use the function assigned to a USER button or USER button icon, press the applicable USER button (one of the USER buttons 1 to 9), or touch the applicable USER button icon (one of the USER button icons 10 to 13) while operation icons are displayed. (When you use the USER1 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 82
Functions of the USER button ∫ List of USER button functions Item [INHIBIT] [FOCUS ASSIST 1] [BACKLIGHT] [SPOTLIGHT] [BLACK FADE] [WHITE FADE] [ATW] [ATW LOCK] [D.ZOOM] [FOCUS ASSIST 2] [REC CHECK] [LAST SCN DEL] [DRS] [FRZ FRAME] [SUPER GAIN] [AREA] [HISTOGRAM] [PUSH AUTO] [EVF/LCD DETAIL] [LOW - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 83
Item [USB MODE] [AWB] [SLOT SEL] Icon [USB] [AWB] [SlotSel] USB Mode*2 Function Auto White Balance Slot Selection [AF AREA] [LCD/EVF OUTPUT] [LOW GAIN] [MID GAIN] [HIGH GAIN] [MENU] [AF Area] [LCD/EVF] [LowGain] [MidGain] [HighGain] [MENU] AF Area Width adjustment LCD/EVF Output Low gain Mid - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 84
Spotlight ≥ Register "Spotlight" to a USER button. (l 80) Switches to automatic iris control for spotlight. Very bright object is recorded clearly. ≥ appears when it is set. ≥ Canceling Spotlight resets the iris mode to the previous setting. ≥ This item cannot be set during Freeze Frame. (l 87) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 85
Auto Tracking White Balance ≥ Register "Auto Tracking White Balance" to a USER button. (l 80) The White Balance can be changed to ATW. (l 61) ≥ This function is not available when the White Balance mode is set to [ATW LOCK]. ATW Lock ≥ Register "ATW Lock" to a USER button. (l 80) This sets the White - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 86
Focus Assist 2 ≥ Register "Focus Assist 2" to a USER button. (l 80) You can set the Focus Assist. (l 57) ≥ You can set the Focus Assist method in [FOCUS ASSIST 2] in the [SW SETUP] menu. ≥ When [FOCUS ASSIST 1] in the [SW SETUP] menu is set to [BOTH], the USER button is disabled. Recording Check ≥ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 87
MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 123) Super Gain ≥ Register "Super Gain" to a USER button. (l 80) ≥ Switch to Manual Mode. (l 45) This changes the gain value to a [SUPER GAIN] value. (l 68) - 87 - - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 88
Area Mode You can apply a variety of effects to the subject you touch. ∫ Setting an Area Mode effect You can select the following menu items to set an effect to be applied when you touch the subject. MENU : [SW SETUP] # [AREA MODE] # desired setting [INH]: [FOCUS]: [IRIS]: [Y GET]: [FOCUS/IRIS]: [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 89
a USER button. (l 80) You can use the USER button as the PUSH AUTO button. ≥ Pressing the USER button or touching the USER button icon in Manual Focus Mode allows you to use One Push AF. ≥ Pressing and holding the USER button or touching and holding the USER button icon in - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 90
EVF/LCD detail ≥ Register "EVF/LCD detail" to a USER button. (l 80) [EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image displayed on the LCD monitor or the viewfinder. (l 54) ≥ These settings will not affect the images actually recorded. Low Light mode ≥ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 91
Flash band compensation ≥ Register "Flash band compensation" to a USER button. (l 80) If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that creates markedly different levels of luminance between the top and bottom of the image when recording is performed in an - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 92
PRE-REC ≥ Register "PRE-REC" to a USER button. (l 80) This allows the recording of an image and audio to start before you press the recording start/stop button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while MOV/MP4 will be recorded from approximately 4 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 93
1 Press USER button or touch USER button icon in the recording screen. ≥ [VFR] will be displayed. ≥ The frame rate display will change. (Example) 12 : 23.98p A Frame Rate (fps) B Frame rate in [REC FORMAT] ≥ ALC / A.REC will be displayed. Audio is not recorded during recording. 2 Rotate - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 94
MODE] or [REC FORMAT] setting is changed to a setting that does not support Variable Frame Rate Mode ≥ The following functions are canceled: j Flash band a case, set the iris, focus and White Balance mode to manual settings. ≥ The maximum continuous recordable time for one scene in Variable - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 95
it is over 99%. ≥ This function is not available during Freeze Frame. (l 87) ≥ You can record an image with little white saturation if you manually adjust the shutter speed or brightness not to display zebra pattern. (l 65, 70) ≥ The zebra pattern does not appear on the images actually recorded - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 96
Scene File ≥ Register "Scene File" to a USER button. (l 80) You can save the scene file settings to the SD card or load them from the SD card to this unit. ∫ Saving scene file settings 1 Press USER button or touch USER button icon in the recording screen. 2 Touch [SAVE]. 3 Touch the name of the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 97
the USB ports of this unit. ≥ If you switch the setting from on to off while a USB port is in use, a message may be displayed, instructing you to unmount the USB cable safely. Select [YES] to terminate the connection safely. Auto White Balance ≥ Register "Auto White Balance" to a USER button. (l 80 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 98
LCD/EVF Output ≥ Register "LCD/EVF Output" to a USER button. (l 80) This changes how to turn on/off the LCD monitor and Viewfinder. (l 33) Low gain ≥ Register "Low gain" to a USER button. (l 80) The gain value can be changed to low gain. (l 67) ≥ This item cannot be set during Freeze Frame. (l 87) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 99
Recording Useful functions ャモンヴ A BARS button B ND FILTER switch C DISP/MODE CHK button Color Bar Screen ヒバプフ ヰョョ BARS button Press the BARS button to output a color bar screen to an external monitor so you can adjust them. ≥ To cancel, press the BARS button again. ≥ It will - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 100
ND filter Using the ND filter switch, you can switch the built-in optical ND filter setting. (The filter adjusts the amount of light.) ≥ Use this function when recording a bright subject outdoors under a clear sky that causes the screen to look white. Slide the ND filter switch. ND1/16 ND1/64 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 101
∫ To display the Mode Information Press and hold the DISP/MODE CHK button to display the mode information screen first. Each time you press the button, the display mode of the screen switches in the following order: Mode information display1 # Mode information display2 # Mode information display3 # - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 102
Recording Using of jog dial A Jog dial Selecting/setting items You can select and set menu items (l 41), etc. using the jog dial. 1 Rotate the jog dial on the menu screen, etc., to move the cursor. ≥ The selected item will be displayed in yellow. 2 Push the jog dial to set. Menu operations - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 103
Using the multi manual function You can select the following functions and adjust their settings using the jog dial. You can also switch between the functions and adjust their - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 104
advance so that you can select more than two functions. ≥ Change settings as follows: Functions Gain adjustment Settings to be changed in advance Switch to Manual Mode. (l 45) VAR adjustment Press the WHITE BAL button and the USER button to which [AWB] is registered to set the White Balance mode - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 105
Playback Motion picture/Still picture playback 1 Set this unit to playback mode. (l 32) 2 Touch the play mode select icon A. UHD UHD UHD UHD UHD UHD UHD UHD UHD Media display The selected media is displayed in yellow. 3 Select the media C you wish to play back. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 106
(To set this unit to Still Picture Playback Mode) Touch the still picture (JPEG) F. ヮヱフ 5 Touch the scene or the still picture to be played back. ≥ Next (Previous) page can be displayed by touching / . ≥ You can change the playback media by pressing the USER button to which [SLOT SEL] is - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 107
START TC, START UB, and DURATION are displayed only for AVCHD scenes. j START TC j START UB j DATE j TIME ZONE j DURATION j REC MODE j FORMAT ≥ If you press the THUMBNAIL button to switch between Recording Mode and Playback Mode, the thumbnails of 9 scenes will be displayed. ≥ By displaying in - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 108
may not proceed normally, or may not be possible. (Please check compatibility in the instruction manual of your device.) ≥ Motion pictures recorded with devices other than this unit are not supported by this unit. Still picture compatibility ≥ This unit is compliant with the unified standard - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 109
Motion picture playback using operation icon For details on the basic playback operations, refer to page 105. Playback operation Skip playback (to the start of a scene) Playback display During Playback Operating steps Touch the LCD monitor and slide from right to left (from left to right) during - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 110
Playback Useful functions Creating still picture from motion picture You can save a frame of a recorded motion picture as a still picture. The picture size with which a still picture will be recorded differs depending on the picture size of [REC FORMAT] with which the motion picture was recorded. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 111
Repeat Playback Playback of the first scene starts after playback of the last scene finishes. Select the menu. MENU : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. ≥ All the scenes displayed in the thumbnail will be repeatedly played back. ≥ Repeat - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 112
Playing back scenes or still pictures by date The scenes or still pictures recorded on the same day can be played back in succession. 1 Touch the date select icon. UHD UHD UHD UHD UHD UHD UHD UHD UHD A Date select icon 2 Touch the playback date. ≥ The scenes or - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 113
Editing Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ≥ Press the THUMBNAIL button to switch this unit to the Playback Mode. (l 32) ∫ To delete the scene or still picture being - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 114
When you stop deleting halfway: Touch [CANCEL] or press MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing: Touch [Return] or press MENU button. ≥ The following scenes/still pictures cannot - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 115
Editing Copying between SD cards Motion pictures or still pictures recorded with this unit can be copied between SD Cards inserted in this unit. ≥ Copying is not possible if the type of the source SD card (SDHC Memory Card/SDXC Memory Card) is different from that of the target SD card. ∫ Check the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 116
If you will delete the motion pictures or still pictures after copying is complete, be sure to play back the motion pictures or still pictures to check that they have been copied to correctly before deleting. ≥ Depending on the following conditions, the time it takes for copying may be longer. j The - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 117
Linking to external devices Connecting Headphones, a Remote Control or an External Monitor Headphones You can connect headphones (commercially-available) to the headphone output jack (3.5 mm (0.14 q) diameter stereo mini jack). A Headphone output jack ≥ Sound is not output from the speaker when - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 118
with their size set to UHD (3840k2160) in [REC FORMAT], you can enjoy finely-detailed 4K motion pictures. For an external monitor that does not support 4K motion picture, you can change the [RESOLUTION] setting so that 4K motion pictures can be played back at a lower resolution. When connecting with - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 119
∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the external monitor setting.) Select the menu. MENU : [OUTPUT SETUP] # [RESOLUTION] # [DOWN CONV.] MENU : [OUTPUT SETUP] # [DOWN CONV - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 120
to the method [1080p], [1080i] or [DOWN CONV.] which enables the images to be displayed on your external device. (Please read the operating instructions for the external device.) ≥ [DOWN CONV.] outputs images in standard picture quality. ∫ To use an AV cable for external output 1 Select the [AV - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 121
Setting Picture size/Frame rate in [REC FORMAT] [RESOLUTION] setting [SYSTEM] UHD (3840k2160)/ 29.97p [1080p] [1080i] [DOWN CONV.] [SYSTEM] UHD (3840k2160)/ 23.98p [1080p] [1080i] [DOWN CONV.] FHD (1920k1080)/ 59.94p, PS 1080/59.94p [SYSTEM] [1080p] [1080i] [DOWN CONV.] FHD (1920k1080)/ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 122
are connected using a USB 3.0 Cable (commerciallyavailable), image data in the SD card can be transferred. ≥ This unit supports USB 3.0. ≥ Concerning non-linear editing, refer to the instruction manual of your editing software. ≥ It is impossible to write data to the SD card on this unit from a PC - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 123
Memory Card or SDXC Memory Card. ≥ If you are using an SDXC Memory Card, some PC may not recognize the data. Make sure your PC supports SDXC cards. - 123 - - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 124
∫ To disconnect USB Cable safely (For Windows) Select the icon in task tray displayed on the PC, and then select the model number of this unit to disconnect the USB cable. ≥ Depending on your PC's settings, this icon may not be displayed. (For Mac) Drag [CAM_SD] disk icon to the [Trash], and then - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 125
NUMBER SET]. ≥ Do not delete the SD card's folders on a PC. Doing so may make the SD card unusable in this unit. ≥ When data not supported by this unit has been recorded on a PC, it will not be recognized by this unit. ≥ Always use this unit to format SD cards. - 125 - - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 126
recorded with this unit while maintaining the image quality. ≥ Please read the operating instructions of the external media device for how to use it. Preparing for copying/playing back Refer to the following support site for information about an external media device. http://pro-av.panasonic.net - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 127
≥ If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD by USB Cable (supplied with USB HDD). 2 Connect the AC adaptor to this unit. ≥ Use the AC adaptor to free you from worrying about the battery running down. 3 Turn on this unit, and press the THUMBNAIL - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 128
∫ Formatting This is for initializing the external media device. ≥ Please be aware that if a media is formatted then all the data recorded on the media is erased and cannot be recovered. Back up important data on a PC etc. ≥ Connect this unit to the external media device and touch [Playback from - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 129
card 2 to the external media device. ≥ For information on copying between SD cards, refer to page 115. 4 Touch the desired items following the instructions on the screen. ≥ It will return to the previous step by touching [Return]. ≥ (When [SELECT SCENES] is selected) When touched, the scene/still - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 130
Playing back the External Media ≥ Only motion picture/still picture that have been copied by connecting this unit to the external media device can be played back. USB HOST A USB Cable (supplied with USB HDD) B USB HDD (commercially-available) C USB flash memory (commercially-available) 1 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 131
some functions by connecting this unit and an iPad on which the AG ROP application is installed. USB HOST A Wireless module that support this unit B Direct connection C Wireless access point connection D iPad and AG ROP application You can perform the following remote control operations with - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 132
iOS 7.1 or later (as of September 2016) Wireless module Attach a wireless module that support this unit to the USB HOST terminal of this unit. ≥ For details on wireless modules that support this unit, refer to the support desk at the following website. http://pro-av.panasonic.net Settings to be made - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 133
Entering text Operate in the same way as you enter characters with a keyboard. Icon [A-a] [Return] [] Description of operation Switches between uppercase and lowercase. Returns to the previous screen. The entered characters are canceled. Switches to symbols and numbers. [] Enters a space. [BS] - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 134
and the DHCP server function. [CLIENT]: Performs automatic retrieval by DHCP when connecting with [WIRELESS SETUP] set to [SSID(SELECT)] or [SSID(MANUAL)]. [SERVER]: Enables the DHCP server function when connecting with [WIRELESS SETUP] set to [DIRECT]. [MAC Address]: Displays the MAC address - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 135
intensity: (Weak) # # # (Strong). Connecting directly Configure the settings in this section to directly connect this unit and the iPad. ≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit. (l 132) ≥ Set [USB MODE SELECT] to [HOST]. (l 176) ≥ Set [USB MODE] to - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 136
to connect this unit and an iPad using a wireless access point. ∫ Searching for wireless access points to set up a connection ≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit. (l 132) ≥ Set [USB MODE SELECT] to [HOST]. (l 176) ≥ Set [USB MODE] to [ON]. (l 176 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 137
[AG ROP] in [Settings] (l 134) on the iPad. For details, refer to [CONNECTION] in Help of the AG ROP app. ∫ Setting up a connection manually ≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit. (l 132) ≥ Set [USB MODE SELECT] to [HOST]. (l 176) ≥ Set [USB MODE] to - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 138
points are saved in History. Connecting from History allows you to easily connect with the same settings as used previously. ≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit. (l 132) ≥ Set [USB MODE SELECT] to [HOST]. (l 176) ≥ Set [USB MODE] to [ON]. (l 176 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 139
Operations during AG ROP application connection ∫ Operations with this unit during connection ≥ The following buttons are disabled: j SHUTTER button j GAIN button j WHITE BAL button j MENU button (The applicable USER button is also disabled, making it impossible to operate the menu.) j BARS button j - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 140
Menu Using the Menu Refer to page 41 for how to set up the Menu. Scene file Settings that are assigned to [F1:] in [FILE SELECT] by default are indicated with underlined text. MENU : [SCENE FILE] # desired setting [FILE SELECT] You can save the desired image settings to each scene number. Switch - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 141
≥ It is possible to switch the scene number by touching F1: to F6: while displaying the operation icons. (l 101) ≥ You can rename the titles for scene numbers (FLUO, etc.) in [NAME EDIT]. ≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 177) [NAME EDIT] You can - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 142
[SKIN TONE DTL] This makes skin colors appear softer for a more attractive appearance. This is more effective if you record a person closely from the torso up. [ON]/[OFF] 1 Touch [SKIN TONE DTL]. 2 Touch [ON]. 3 Touch [EXIT] to exit the menu screen. ≥ If the background or anything else in the scene - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 143
[RB GAIN CONTROL SETTING] This adjusts the color balance for [Ach] or [Bch] of the White Balance mode. You can also set whether or not to apply the color balance settings to Auto White Balance/Auto Black Balance. 1 Touch [RB GAIN CONTROL SETTING], and select the desired item. [AWB A]: [AWB B]: - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 144
[CHROMA LEVEL] Adjusts color density. 1 Touch [CHROMA LEVEL]. 2 Touch / to adjust settings. ≥ You can select a value between s70 and r30. 3 Touch [EXIT] to exit the menu screen. ≥ The default setting that is assigned to [F1:] in [FILE SELECT] is "0". [CHROMA PHASE] Adjusts color balance. 1 Touch [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 145
[GAMMA MODE] Tone or contrast of the image is set in accordance with the recorded scenes. 1 Touch [GAMMA MODE]. 2 Touch / to select the setting item. [HD]: This is the video gamma feature for HD (High Definition). [SD]: This increases gain in darker areas more than [HD] does. [FILMLIKE1]: - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 146
that is assigned to [F1:] in [FILE SELECT] is "93.0". [KNEE MASTER SLOPE] This sets the knee inclination when [KNEE MODE] is set to [MANUAL]. 1 Touch [KNEE MASTER SLOPE]. 2 Touch / to adjust settings. ≥ You can select a value between 0 and 99. 3 Touch [EXIT] to exit the menu screen. ≥ The default - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 147
[DRS EFFECT] Selects the level of the DRS function. 1 Touch [DRS EFFECT]. 2 Touch / to select the setting item. [1]/[2]/[3] ≥ Higher the value, greater the compression level of the highly illuminated area. ≥ Higher the value, greater the noise of the dark area. 3 Touch [EXIT] to exit the menu screen - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 148
System mode All default settings are indicated with underlined text. MENU : [SYSTEM MODE] # desired setting [REC MODE] Switch the recording mode of the motion pictures to record. [MOV]*: This recording method is suitable for editing images. Motion pictures will be saved in MOV format. [MP4]*: - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 149
≥ When [MOV] or [MP4] in [REC MODE] is selected Recording format [UHD 2160/29.97p 100M] [UHD 2160/23.98p 100M] [FHD 1080/59.94p 50M] [FHD 1080/29.97p 50M] [FHD 1080/23.98p 50M] [FHD 1080/59.94i 50M] Size (Picture size) UHD (3840k2160) FHD (1920k1080) Frame rate 29.97p 23.98p 59.94p 29.97p 23.98p - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 150
Recording format [UHD 2160/29.97p 100M] [UHD 2160/23.98p 100M] [FHD 1080/59.94p 50M] [FHD 1080/29.97p 50M] [FHD 1080/23.98p 50M] [FHD 1080/59.94i 50M] [PS 1080/59.94p] [PH 1080/59.94i] [PH 1080/23.98p] [HA 1080/59.94i] [HE 1080/59.94i] [PM 720/59.94p] [SA 480/59.94i] Normal recording ± ± ± ± ± - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 151
[LOW LIGHT MODE] Enables/disables Low Light mode. (l 69) ≥ Slide the AUTO/MANU switch to switch to Auto Mode. [ON]/[OFF] [FLASH BAND COMPENSATION] If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that creates markedly different levels of luminance between the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 152
User switch All default settings are indicated with underlined text. MENU : [USER SW] # desired setting [USER1]/[USER2]/[USER3]/[USER4]/ [USER5]/[USER6]/[USER7]/[USER8]/[USER9] Sets the function to assign to the USER buttons. (l 80) ≥ For the functions of the USER button that can be registered, - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 153
Switch setting All default settings are indicated with underlined text. MENU : [SW SETUP] # desired setting [IRIS RING] Sets the rotation direction and iris control of the iris ring. A B [DOWN OPEN]: [UP OPEN]: 1 Iris ring Iris will open when it is turned toward B. Iris will open when it is - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 154
[HIGH GAIN] Sets the gain value for the [HIGH GAIN] position of the GAIN button. 1 Touch [HIGH GAIN]. 2 Touch / to adjust settings. ≥ You can select [AUTO] or a value between 0 dB and 30 dB. When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 30 dB. (l 150) 3 Touch [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 155
[CUSTOM O.I.S.] When [ON] is selected, the Image Stabilizer works with customized [BLUR AMPLITUDE] and [BLUR FREQUENCY] settings. (l 51) [ON]/[OFF] [BLUR AMPLITUDE] This sets the blur amplitude of the Image Stabilizer during recording. (l 51) [1]/[2]/[3]/[4]/[5] [BLUR FREQUENCY] This sets the blur - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 156
[WB PRESET] Sets which White Balance mode to use when the WHITE BAL button is pressed to switch to the PRST position. [3200K]/[5600K]/[VAR] [WB VAR] Sets the color temperature when the White Balance mode is set to [VAR]. (l 64) 1 Touch [WB VAR]. 2 Touch / to adjust settings. ≥ You can select a value - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 157
[FOCUS RING DRIVE] This sets the way you adjust focus with the focus ring. (l 54) [SPEED]/[COARSE]/[FINE] [FOCUS MACRO] This enables/disables the Focus Macro function. [ON]/[OFF] ≥ If [ON] is selected, subjects at a distance of approximately 10 cm (3.93 q) to infinity can be brought into focus when - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 158
[ZEBRA] Switch between the zebra display and marker display. [ZEBRA 1]/[ZEBRA 2]*/[MARKER]*/[OFF] * Not displayed when [ZEBRA 2]/[MARKER] is set to [OFF]. (l 170) ≥ For information on the zebra display and marker display, refer to page 95. [ZEBRA MODE] This sets the display duration of the zebra - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 159
[SUB ZOOM] Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different depending on the setting. [OFF]/[1]/[2]/[3]/[4]/[5]/[6]/[7] ≥ The larger the value is, the faster the zoom speed becomes, and vice versa. ≥ When [FAST ZOOM] is set to [ON] and [7] is selected, - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 160
Auto switch setting All default settings are indicated with underlined text. MENU : [AUTO SW] # desired setting [A.IRIS] This enables/disables Auto Iris for Auto Iris Mode. (l 45) [ON]/[OFF] [AGC] This enables/disables AGC for Auto Iris Mode. (l 45) [ON]/[OFF] [AGC LIMIT] Sets the maximum possible - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 161
[AUTO SLOW SHTR] You can record bright pictures even in dark places by slowing the shutter speed. Slow Shutter works in Auto Shutter Mode. (l 70) [ON]/[OFF] ≥ The shutter speed will be adjusted to one of the following values according to the ambient brightness. The value will differ depending on - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 162
Recording Setup All default settings are indicated with underlined text. MENU : [RECORD SETUP] # desired setting [MEDIA SELECT] Card slot can be selected separately to record motion pictures. (l 42) [SD CARD 1]/[SD CARD 2] [2 SLOTS FUNC.] You can set relay/simultaneous recording. ≥ Insert SD - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 163
while for this unit to recognize a new SD card, replace the SD card that ran out of space when the SD card currently being used as a destination still has sufficient remaining recordable time. ≥ The maximum recording time for Relay Recording is 10 hours. ≥ When the recording time of Relay Recording - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 164
picture recording time is approx. 2 second. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings. (l 53, 61) ≥ We recommend connecting the AC adaptor to this unit when recording images for a long period of time. [VFR - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 165
[PRE-REC] This allows the recording of an image and audio to start before you press the recording start/stop button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while MOV/MP4 will be recorded from approximately 4 seconds before the operation. (l 92) [ON]/[OFF] [ - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 166
of the audio recording level for audio channel 1. (l 74) [AUTO]/[MANUAL] [AUDIO LEVEL CH2] Switches the adjustment method of the audio recording level for audio channel 2. (l 74) [AUTO]/[MANUAL] [AUDIO ALC LINK] If you set this item to [ON], when ALC - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 167
with natural sound when set to [OFF]. (l 75) ≥ Set [AUDIO LEVEL CH1] to [MANUAL]. (l 74) [ON]/[OFF] [AUDIO ALC CH2] If you set this item to [ON], with natural sound when set to [OFF]. (l 75) ≥ Set [AUDIO LEVEL CH2] to [MANUAL]. (l 74) [ON]/[OFF] [INPUT1 LINE LEVEL] Sets the input level of the audio - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 168
Output Setup Different menu items are displayed depending on whether this unit is in Recording Mode or Playback Mode. All default settings are indicated with underlined text. MENU : [OUTPUT SETUP] # desired setting [RESOLUTION] This changes the way in which images are output to an external device. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 169
[AV OUT] Enable/disable output from the VIDEO OUT terminal or AUDIO OUT terminal. (l 120) [ON]/[OFF] [H/PHONE MODE] Select the sound heard through the headphone terminal and AUDIO OUT terminal. [LIVE]: [RECORDING]: The sound which has been input from the microphone is output as is. This setting - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 170
Display setting Different menu items are displayed depending on whether this unit is in Recording Mode or Playback Mode. All default settings are indicated with underlined text. MENU : [DISP SETUP] # desired setting [ZEBRA DETECT 1] Selects the brightness level of the left-leaning zebra patterns on - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 171
[GUIDE LINES] You can check if the image is level while recording motion pictures and still pictures. The function can also be used to estimate the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 172
[FOCUS DISPLAY] This changes the units of focus values. [NUMBER] A value between 0 and 99 is displayed. [feet] All values are displayed in feet. [m] All values are displayed in meter. [OFF] No value is displayed. [ZOOM DISPLAY] This changes the units of zoom values. [NUMBER] A value - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 173
the remaining battery capacity indication. [ON]/[OFF] [OTHER DISPLAY] This shows or hides indications on the screen except for [USER BUTTON DISPLAY], [GUIDE LINES], [SAFETY ZONE], [CENTER MARKER], [DATE/TIME], [AUDIO LEVEL METER], [LENS STATUS] and [CARD & BATTERY]. [ON]/[OFF] [POWER LCD] This makes - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 174
[EVF SETTING] Adjusts the brightness and color intensity of the viewfinder. (l 37) [COLOR]/[BRIGHTNESS]/[CONTRAST] ≥ The default settings are as follows: j [COLOR]: "0" j [BRIGHTNESS]: "0" j [CONTRAST]: "0" [SELF SHOOT] Switches the mirror function of the LCD monitor when recording yourself. (l 38) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 175
Other Functions Different menu items are displayed depending on whether this unit is in Recording Mode or Playback Mode. All default settings are indicated with underlined text. MENU : [OTHER FUNCTION] # desired setting [FORMAT MEDIA] The SD card or the external media device can be formatted. (l 43, - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 176
[ALERT SOUND] Touch screen operation, start and stop of recording can be confirmed with this sound. When [OFF] is selected, the sound is not output at the start/end of recording, etc. [OFF]/ (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the message displayed on the - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 177
[INITIAL SET] The menu settings or [FILE SELECT] are reset to the default. (l 140) [ALL]: This is for initializing all menus.* [SCENE]: This is for initializing the setting of each scene number of [FILE SELECT]. [NETWORK]: This is for initializing the [NETWORK SETUP] menu settings. [NO]: - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 178
user account for the AG ROP application. (l 132) [SET]/[OFF] [WIRELESS SETUP] Set the wireless LAN connection method. (l 135) [DIRECT]/[SSID(SELECT)]/[SSID(MANUAL)] [Wireless LAN setup] You can change or check the network setup, such as the IP address, subnet mask, and MAC address for wireless LAN - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 179
[NETWORK SETUP PASSWORD] This will set/clear the Password to limit the startup of the [NETWORK SETUP] menu. By setting the Password, it will prevent erroneous operation, prevent wrongful use of the wireless LAN function by third party, and protect the set personal information. [Setup]/[Delete] 1 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 180
Video Setup All default settings are indicated with underlined text. ≥ Press the THUMBNAIL button to switch this unit to the Playback Mode. ≥ Touch the play mode select icon, and set this unit to Motion Picture Playback Mode. (l 105) MENU : [VIDEO SETUP] # desired setting [REPEAT PLAY] Playback of - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 181
Picture Setup ≥ Press the THUMBNAIL button to switch this unit to the Playback Mode. ≥ Touch the play mode select icon, and set this unit to Still Picture Playback Mode. (l 105) MENU : [PICT. SETUP] # desired setting [SCENE PROTECT] Still pictures can be protected so that they are not deleted by - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 182
Display Indications ∫ Recording indications Example: Display in English TC 00:00:0000 R 1h20m I- REC HDMI EX.SENS. DRS R 1h20m FLUO 50M D 5X 30:29.97p FBC VFR 5600K Ach ND1/64 99% 0dB SHUTTER A.SHTR 1/100 AUTO MNL NOV 15 2016 15:30:00 OPEN AF50 Z00 A TC 00:00:00.00/TC 00: - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 183
filter (l 100) 99% Luminance level (l 88, 95) Luminance display frame (l 95) Center Marker (l 171) AGC, 0 dB Gain value (l 67) SHUTTER Multi Manual Function (l 103) A.SHTR Auto Shutter display (l 70) 1/100 Shutter speed (l 70) C Time Stamp recording in progress (l 165) When [AUDIO ALC CH1 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 184
∫ Playback indications Example: Display in English TC 00:00:0000 No.0010 100M 29.97p ICONS 15:30 NOV 15 2016 1, ;, 5, , 6, D, E, ;1, 2; , 7, 8, 9, :, Display during playback (l 105, 109) TC 00:00:00.00/TC 00:00:00:00 Counter Display (l 76) , (White) Card slot number No.0010 Scene - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 185
/error messages to be indicated on the screen in text. During recording/playback Display Description Behavior and cause CHECK CARD. The SD card is not supported by this ≥ Check the SD card. unit. THIS CARD CANNOT RECORD IN VIDEO MODE. This is displayed when the SD card ≥ Use an SD card - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 186
Display Description Behavior and cause CANNOT RECORD - DATE CAPACITY IS FULL. Cannot record - Playlist capacity is full. This is displayed when you try to record in excess of the maximum number of scenes allowed for one SD card. ≥ The operation will stop. ≥ Replace the SD card or delete - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 187
UNABLE TO FORMAT. Formatting is not possible due to, ≥ Check the SD card. for example, a problem with the SD card. Cannot delete data on card. The SD card cannot be formatted. CANNOT PROTECT. SD card, or the OS is not supported. Behavior and cause ≥ Check the SD card. ≥ Check to see if the OS is - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 188
external media is 32 GB or below or above 2 TB. ≥ Connect a supported external media. CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT. MEDIA. Copying cannot be performed due to, for example, a problem with the copy destination media device. ≥ Check the copy destination - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 189
Display Description Behavior and cause THIS SCENE CANNOT BE COPIED. This is displayed when one or more of ≥ Copy scenes except for the scenes you are trying to copy the ones that cannot be cannot be played back on this unit. copied. Cannot copy: contains recordings from other devices. This - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 190
Display Warning Indications When an error is detected immediately after this unit is turned on or while it is being operated, the status indicator, on-screen displays and the AG ROP application screen (during AG ROP connection) inform you of the error. System error The battery is depleted (Low - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 191
Recording error Card error The battery will be depleted soon Status indicator It flashes once per second. On-screen display s AG ROP application screen [ WARNING ] flashes four times per second. Meaning of the warning A recording error or recording circuit setting error has occurred. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 192
The card is nearly full Status indicator s On-screen display The remaining recordable time flashes red. (When it is less than 1 minute) AG ROP application screen [ WARNING ] flashes once per second. (When it is less than 1 minute) Meaning of the warning The SD card is almost out of space. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 193
Others Troubleshooting ∫ It is not a malfunction in following cases The lens, the viewfinder or ≥ , but this is because the unit is using MOS for the image sensor. This is not a malfunction. Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 194
≥ Press the COUNTER button to switch the counter display. (l 76) Problem The unit arbitrarily stops recording. Auto Focus function does not work. Audio a scene which is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus. (l 46, 53) ≥ Variable Frame Rate Mode - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 195
cannot be recovered. Back up important data on a PC etc. Problem Although this unit is correctly connected to an external monitor, images cannot devices. With other products Check points ≥ Please read the operating instructions of your external monitor and select the channel that matches the input - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 196
Problem When connected by the USB Cable, this unit is not detected by the PC . ≥ To disconnect the USB Cable safely, double-click the icon in the task tray and follow the instructions on the screen. Problem If the SD card is inserted in this unit, it is not recognized. Others Check points ≥ If - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 197
download the firmware as needed. ≥ Update completes by loading the downloaded files to the camera via the SD card. For details on update, visit the support desk at the following website: http://pro-av.panasonic.net - 197 - - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 198
of Apple Inc., registered in the U.S. and other countries. ≥ App Store is a service mark of Apple Inc. ≥ "Wi-Fi®" is a registered trademark of Wi-Fi Alliance ≥ Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 199
and conditions thereof, which can be accessed by selecting [SOFTWARE INFO] in "Other Functions" as described in "Using the Menu" in the Operating Instructions (PDF file). At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 200
Others Recording functions that cannot be used simultaneously Due to the specifications of this unit, depending on the recording function being used, it is not possible to use or select certain other recording functions. ≥ "±": Available; "s": Not available* * "Not available" includes instances - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 201
Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording. ≥ "h" is an abbreviation for hour, "min" for minute and "s" for second. ≥ If recording for long periods, - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 202
Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. Picture size Aspect ratio 4 GB SD card 16 GB 64 GB 8.3M 3840k2160 750 3000 12000 2.1 M 1920k1080 16:9 3200 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 203
Others Specification Memory Card Camera-Recorder General Power: DC 7.28 V (When using battery) DC 12 V (When using AC adaptor) Power consumption: 12.2 W (When using LCD monitor) indicates safety information Ambient operating temperature: 0 oC to 40 oC (32 °F to 104 °F) Ambient operating humidity: 10 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 204
, 36, 48, 60 (fps) Minimum subject illumination: 1.3 lx (F2.8, Super Gain 36 dB, Manual slow shutter 1/30 sec.) Digital zoom: 2k/5k/10k/i.Zoom (max. 25k) Lens hood: Hood to 32 GB)/ SDXC Memory Card (48 GB to 128 GB); UHS-I supported Refer to page 30 for details on SD cards usable in this unit. - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 205
; 2160/29.97p/23.98p, 1080/59.94p/29.97p/ 23.98p/59.94i, 720/59.94p, 480/59.94p Audio input Built-in microphone: Supports stereo microphone AUDIO INPUT1/AUDIO INPUT2 terminal: XLRk2, 3-pin Input high impedance, LINE/MIC/MIC_48 V (switch selection) ≥ LINE; _4 dBu/0 dBu (selectable menu) ≥ MIC; `40 - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 206
AC adaptor Power source: AC 100 V to 240 V, 50 Hz/60 Hz, 1.2 A Power output: DC 12 V, 3.0 A indicates safety information Ambient operating temperature: 0 oC to 40 oC (32 °F to 104 °F) Ambient operating humidity: 10%RH to 90%RH (no condensation) Mass (Weight): Approx. 225 g (Approx. 0.496 lbs.) - Panasonic AG-UX90NTSC | AG-UX90 Operating Instructions - Page 207
Panasonic Corporation Web site: http://www.panasonic.com © Panasonic Corporation 2016
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
 |
 |
Operating Instructions
Memory Card Camera-Recorder
Model No.
AG-UX90
Please read these instructions carefully before using this product, and save this manual for future
use.
DVQP1146ZA
ENGLISH
F1016YA0
P
PJ