Panasonic AJ-PX380G Operating Instructions

Panasonic AJ-PX380G Manual

Get Panasonic AJ-PX380G PDF manuals and user guides View all Panasonic AJ-PX380G manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AJ-PX380G manual content summary:

  • Panasonic AJ-PX380G | Operating Instructions - Page 1
    Operating Instructions Memory Card Camera-Recorder Model No. AJ-PX380G Before operating this product, please read the instructions carefully and save this manual for future use. W0915HM1115 -YI ENGLISH VQT5L72A-1(E)
  • Panasonic AJ-PX380G | Operating Instructions - Page 2
    ) out of the reach of babies and small children. CAUTION: Do not remove panel covers by unscrewing. No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION: To reduce the risk of fire and annoying interference, use the recommended accessories only. CAUTION: Do not
  • Panasonic AJ-PX380G | Operating Instructions - Page 3
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
  • Panasonic AJ-PX380G | Operating Instructions - Page 4
    analog video signals. Audio signal connecting cables If your apparatus supports AES/EBU serial digital audio signals, use cables designed for with ferrite core(s), they must be attached on cable(s) following instructions in this manual. 3. Performance level The performance level of the apparatus is
  • Panasonic AJ-PX380G | Operating Instructions - Page 5
    method described in this manual. • If a battery made by any other manufacturer is to be used, check the Operating Instructions accompanying the battery. Back-up Battery (Lithium Battery) • For the removal of the battery for disposal at the end of its service
  • Panasonic AJ-PX380G | Operating Instructions - Page 6
    names, company names, product names, etc., contained in this instruction manual are trademarks or registered trademarks of their respective owners. ffThis "P2 memory card". ffA memory card with the "microP2" logo such as AJ‑P2M032AG (optional) is referred to as a "microP2 memory card". ffP2 memory
  • Panasonic AJ-PX380G | Operating Instructions - Page 7
    Contents Contents Read this first!  2 Setting the shutter mode and speed  63 Setting the synchro scan mode  64 Chapter 1 Overview 9 Flash band compensation (FBC) function  65 Setting the flash band compensation function  65 Before using the camera  10 Assigning functions to
  • Panasonic AJ-PX380G | Operating Instructions - Page 8
    174 Waveform monitor function  107 Connecting to the remote control unit (AJ‑RC10G)  182 Confirmation of return video signal in the viewfinder  SmartUI operation 154 Transferring selected clips automatically (manual selection mode)  208 SmartUI basic operations  155 Displaying the
  • Panasonic AJ-PX380G | Operating Instructions - Page 9
    Chapter 1 Overview Before using the camera, read this chapter.
  • Panasonic AJ-PX380G | Operating Instructions - Page 10
    . http://pro-av.panasonic.net/ ffInstall the required driver into your computer from the website. ffFor installation procedure of the driver, refer to the installation manual on the website. - 10 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 11
    Chapter 1 Overview - Setting the region of use (setting the frame frequency, etc.) Setting the region of use (setting the frame frequency, etc.) When the camera is shipped, the region of use is not set. Before you use the camera for the first time, follow the steps below to change the setting to
  • Panasonic AJ-PX380G | Operating Instructions - Page 12
    Accessories Shoulder strap (page 39) Chapter 1 Overview - Accessories Mount cap (already attached to the product) (page 16) @@NOTE tt After unpacking the product, dispose of the packing material properly. - 12 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 13
    memory cards that are not described in the Operating Instructions, visit the support desk at the following website: http://pro-av Accessories Part name Soft carrying case Microphone holder Rain cover Tripod adaptor AJ‑SC900 AJ‑MH800G SHAN-RC700 SHAN-TM700 Part No. Remark - "Using front
  • Panasonic AJ-PX380G | Operating Instructions - Page 14
    Chapter 2 Description of parts This chapter describes the names, functions, and operations of parts on the camera. Details displayed on the [HOME] screen of the SmartUI are also described.
  • Panasonic AJ-PX380G | Operating Instructions - Page 15
    > terminal (pages 182, 184) Connect the remote control unit AJ‑RC10G (optional) to remote-control some functions. For details, refer to "Connecting to the remote control unit (AJ‑RC10G)" (page 182). Connect the extension control unit AG‑EC4G (optional
  • Panasonic AJ-PX380G | Operating Instructions - Page 16
    microphone cables. 16 terminal (page 31) Connect the lens connection cable. For a detailed description of the lens used, refer to the Operating Instructions for the lens. 17 Tripod mount (page 39) Attach the tripod adaptor SHAN-TM700 (optional) when mounting the camera on the tripod. 18 Lens
  • Panasonic AJ-PX380G | Operating Instructions - Page 17
    SETTING] → [FRONT MIC POWER]. When it is set to [ON] and a microphone is not connected, low frequency noise may occur. This is not a problem when a microphone is connected. 2 dial (page 68) Adjust the recording level of audio channels 1 to 4. ffSetting the audio level adjustment
  • Panasonic AJ-PX380G | Operating Instructions - Page 18
    Chapter 2 Description of parts - Audio (output) function section Audio (output) function section 2 1 4 3 1 dial Adjust the volume of the speaker and earphones. 2 Internal speaker During recording, EE audio can be monitored, and during playback, playback audio can be monitored. Audio
  • Panasonic AJ-PX380G | Operating Instructions - Page 19
    Chapter 2 Description of parts - Shooting and recording/playback functions section Shooting and recording/playback functions section Shooting and recording (camera unit) 1 2 34 5678 9 1 dial (page 54) Select the filter to suit the brightness of the subject. : Does not use the
  • Panasonic AJ-PX380G | Operating Instructions - Page 20
    Chapter 2 Description of parts - Shooting and recording/playback functions section - The subject is a high-contrast scene. 8 switch (pages 60, 61) Select the method for adjustment of the white balance. : Set the switch to this position when you have no time or are otherwise unable
  • Panasonic AJ-PX380G | Operating Instructions - Page 21
    MON OUT SELECT] screen of SmartUI. Cross-conversion and up-conversion are not supported. 5 terminal (page 194) Connect the LAN cable. @@NOTE USB2.0> terminal (sub-host) (pages 192, 193) Mount the wireless module AJ‑WM30 (optional). Or, attach the USB 2.0 extension cable connecting the body and
  • Panasonic AJ-PX380G | Operating Instructions - Page 22
    cards is recommended. Be sure to format cards on the camera before use. - Refer to our support desk at the following website for the latest information not included in these operating instructions. http://pro-av.panasonic.net/ - SDHC memory cards are a standard that was established in 2006 by
  • Panasonic AJ-PX380G | Operating Instructions - Page 23
    Chapter 2 Description of parts - Menu operation section and thumbnail operation section Menu operation section and thumbnail operation section 12 34567 1 Jog dial button (page 128) ffWhen the setting menu is displayed, navigate through the setting menu pages to select and set items. Turning the
  • Panasonic AJ-PX380G | Operating Instructions - Page 24
    Time code section Chapter 2 Description of parts - Time code section 1 234 HOLD COUNTER RESET MONITOR SEL LIGHT TC NDF SLABE P -REC CAM MEDIA CH1 A E F BATT CH2 E F 0 -10 -18 -20 AUDIO -30 SETUP dB 12 HOME /REW STOP KEY LOCK FF/ PLAY/PAUSE THUMBNAIL SET TOP SHIFT 1
  • Panasonic AJ-PX380G | Operating Instructions - Page 25
    Chapter 2 Description of parts - Warning and status display section Warning and status display section 1 34 2 1 Back tally lamp When the back tally switch is set to , the lamp acts in the same way as the front tally lamp at the viewfinder. 2 Rear tally lamp When the back tally switch is set to <
  • Panasonic AJ-PX380G | Operating Instructions - Page 26
    Chapter 2 Description of parts - SmartUI display ([HOME] screen) SmartUI display ([HOME] screen) 4 5 TCG NDF SLAVE P -REC 3 1 MEDIA CH1 A E F 2 BATT CH2 E F 12 6 1 Media remaining space indicator bar Displays the remaining free space in the P2 card using a 7-segment display. Each
  • Panasonic AJ-PX380G | Operating Instructions - Page 27
    Chapter 3 Preparation Before you use the camera, mount the battery and lens following the procedures in this chapter. The mounting of accessories is also described in this chapter.
  • Panasonic AJ-PX380G | Operating Instructions - Page 28
    is recommended. tt Before you use a battery, charge it with a battery charger. (For details on charging, refer to each operation instructions.) Mounting and setting battery Using Anton/Bauer batteries Power supply output terminal for lighting Release lever Anton/Bauer batteries Light control
  • Panasonic AJ-PX380G | Operating Instructions - Page 29
    Chapter 3 Preparation - Power supply Using V-mount type batteries Mount the V-mount type battery plate. As shown in the figure, insert and slide in the direction of the arrow. Release lever 1 Mount the V-mount type battery plate. 2 Slide in the direction of the arrow. 3 Set the battery type.
  • Panasonic AJ-PX380G | Operating Instructions - Page 30
    Chapter 3 Preparation - Power supply DC IN 1 GND 2 NC 3 NC 4 +12 V Panasonic Parts No.: K1AA104H0038 Manufacturer Parts No.: HA16RX-4P (SW1) (76) (Hirose Electric Co.) @@NOTE tt When both the battery and the external DC power supply are connected, the power supply from the external DC
  • Panasonic AJ-PX380G | Operating Instructions - Page 31
    lens flange back adjustments. For details, refer to "Lens flange back adjustment" (page 31). @@NOTE tt For handling the lens, refer to the lens operating instructions. tt For details on the current from the terminal, refer to "Details of the connector signals" (page 222). tt When the lens is
  • Panasonic AJ-PX380G | Operating Instructions - Page 32
    too high, use the filters or the shutter. 4 Loosen the F.f (Flange focus) ring clamping screw. 5 Set the zoom ring to the telephoto end position, either manually or by electric drive. 6 Aim the lens at the lens flange back adjustment chart and turn the distance ring to bring the chart into focus
  • Panasonic AJ-PX380G | Operating Instructions - Page 33
    the screen. (Fig. 1) 2 Set the screen. 1) Shoot a white sheet of paper with no unevenness of color for the whole screen. 2) Set the lens aperture to manual, and adjust it so that the zebra pattern covers the whole viewfinder screen. ffMake sure that the lens aperture control is between F4 to F11
  • Panasonic AJ-PX380G | Operating Instructions - Page 34
    lens parts number XT17x4.5BRM-K14 @@NOTE tt For details on additions and modifications to lenses compatible with the chromatic aberration compensation function, visit the support desk at the following website: http://pro-av.panasonic.net/ - 34 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 35
    Chapter 3 Preparation - Mounting and adjusting the lens Operation of chromatic aberration compensation function Operate by the following procedure when lens data is already stored on the camera. 1 Mount the lens on the camera, and connect the lens connector to the camera. 2 Set to [ON] using main
  • Panasonic AJ-PX380G | Operating Instructions - Page 36
    the lens cable is connected. The response data from the lens is not supported, or the response contains information other than that defined in the chromatic chromatic aberration compensation will not function, but will not cause any problems in use. Turn the focus/zoom ring to pass through the
  • Panasonic AJ-PX380G | Operating Instructions - Page 37
    audio input Prepare the camera for connecting audio input devices. Using front microphone Attach microphones such as the microphone kit AJ‑MC700P (optional), AG‑MC200G (optional), etc. Viewfinder Viewfinder clamping screw Microphone holder Fig. 1 Fig. 2 terminal Fig. 3 AUD02:INPUT
  • Panasonic AJ-PX380G | Operating Instructions - Page 38
    Using audio devices Chapter 3 Preparation - Preparing for audio input c ab a: terminal b: terminal c: / switch 1 Connect the audio equipment to the or terminal of the camera with the XLR cable. 2 According to the
  • Panasonic AJ-PX380G | Operating Instructions - Page 39
    Mounting accessories Chapter 3 Preparation - Mounting accessories Attaching a tripod When attaching the camera to a tripod, use the tripod adaptor SHAN-TM700 (optional). Tripod adaptor Pan head Fig. 1 Fig. 2 1 Mount the tripod adaptor on the tripod. (Fig. 1) 2 Mount the camera on the tripod
  • Panasonic AJ-PX380G | Operating Instructions - Page 40
    Chapter 3 Preparation - Mounting accessories Attaching the rain cover The figure below shows an example of use of the rain cover SHAN-RC700. Tighten the cord Secure with the surface fastener - 40 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 41
    Chapter 3 Preparation - Connecting the terminal to the external recording start/stop switch Connecting the terminal to the external recording start/stop switch It is possible to retrieve 1.5 A current from the terminal of the camera. Recording start/stop can be controlled
  • Panasonic AJ-PX380G | Operating Instructions - Page 42
    Chapter 3 Preparation - Charging the built-in battery Charging the built-in battery The date/time set in the camera is maintained by the built-in battery. The built-in battery may be consumed when the power of the camera is not turned on for approximately a half year. If [BACKUP BATT EMPTY] is
  • Panasonic AJ-PX380G | Operating Instructions - Page 43
    Chapter 3 Preparation - Setting the date/time of the internal clock Setting the date/time of the internal clock The date/time and time zone are recorded as metadata in the content (clip) while shooting. The date/time metadata will affect the playback order by the thumbnail. Always check and set the
  • Panasonic AJ-PX380G | Operating Instructions - Page 44
    of the electric zoom. Ensure that the image changes between telescopic and wide-angle. 2 Set the zoom to the manual zoom mode and check the behavior of the manual zoom. Rotate the manual zoom lever and ensure that the image changes between telescopic and wide-angle. 3 Set the iris to automatic
  • Panasonic AJ-PX380G | Operating Instructions - Page 45
    terminal to an appropriate audio source, and ensure that both level displays for CH1/CH2 change according to the audio volume. Inspecting the audio level manual adjustment 1 Press the button to display the [AUD02:INPUT] screen of SmartUI. 2 Set the [IN] in CH1/CH2 to [FRONT]. 3 Set the [LVL
  • Panasonic AJ-PX380G | Operating Instructions - Page 46
    Chapter 3 Preparation - Inspections before shooting 5 Press the button to display the [SET01:TC/UB] screen of SmartUI. 6 Set the [TC_MD] to [R‑RUN]. 7 Press the button to display the [HOME] screen of SmartUI. 8 Press the button. Ensure that the number in the counter display
  • Panasonic AJ-PX380G | Operating Instructions - Page 47
    P2 card Chapter 3 Preparation - P2 card Inserting a P2 card When using the camera for the first time, be sure to set the time data beforehand. (page 43) Select and use either of the P2 or microP2 memory card slot on the camera. microP2 memory card slot 1 microP2 memory card slot 2 microP2 memory
  • Panasonic AJ-PX380G | Operating Instructions - Page 48
    Chapter 3 Preparation - P2 card ffP2 memory cards - Lift the eject button (Fig. 1), and press in. (Fig. 2) ffmicroP2 memory cards - Press in the microP2 memory card further into the camera and let go. - The microP2 memory card is released from the card slot, and the microP2 memory card can be
  • Panasonic AJ-PX380G | Operating Instructions - Page 49
    enter the password. For details, refer to "Manual CPS authentication" (page 124). The P2 card can be used with the camera. @@NOTE tt AJ‑P2C002SG (2 GB) cards cannot be used. to our support desk at the following website for the latest information not included in these operating instructions. http
  • Panasonic AJ-PX380G | Operating Instructions - Page 50
    recognized cannot be checked. Do not perform any operation other than manual authentication and formatting with the failed card inserted. tt To access details on downloading P2 Viewer Plus and the operating environment, visit the support desk at the following website: http://pro-av.panasonic.net/ tt
  • Panasonic AJ-PX380G | Operating Instructions - Page 51
    Chapter 3 Preparation - Tally lamp Tally lamp The tally lamp will flash when the camera is in the following status. ffWhen there is no remaining battery (once per second) ffThe P2 card has less free space to record and the battery level is low (one time per second) ffThe P2 card has been removed
  • Panasonic AJ-PX380G | Operating Instructions - Page 52
    Chapter 4 Shooting This chapter describes the basic procedure for recording. It also describes special shooting methods such as pre-recording and loop recording.
  • Panasonic AJ-PX380G | Operating Instructions - Page 53
    Chapter 4 Shooting - Basic procedures Basic procedures This section describes the basic procedures for shooting. Before you actually leave for shooting, pre-inspect your system to ensure that it works properly after making preparations. (page 44) Preparation Power supply setup to P2 card insertion
  • Panasonic AJ-PX380G | Operating Instructions - Page 54
    For shooting Chapter 4 Shooting - Basic procedures White/black balance adjustment to completion of recording For shooting, use the following steps. ab b cd e a: dial b: button c: switch d: switch e: switch 1 Switch the dial
  • Panasonic AJ-PX380G | Operating Instructions - Page 55
    Chapter 4 Shooting - Basic procedures Standard recording Press the button to start recording of video and audio on the P2 card. Data consisting of video and audio (including additional information) generated by a single shooting action is called a "clip". button @@NOTE tt In the
  • Panasonic AJ-PX380G | Operating Instructions - Page 56
    Chapter 4 Shooting - Basic procedures Selecting the resolution, codec, and video format for recording The resolution of the recording image (1080P, 1080i, 720P, 480i, 576i) and recording codec (AVC‑Intra, AVC‑LongG, DVCPRO HD, etc.) and recording frame rate can be selected. Set in the main menu →
  • Panasonic AJ-PX380G | Operating Instructions - Page 57
    rr Resolution: 720×576 Chapter 4 Shooting - Basic procedures [LINE&FREQ] [576‑50i] Setting [REC FORMAT] [DVCPRO50/50i] [DVCPRO/50i] [DV/50i] [50i] [25P] [CAMERA MODE] @@NOTE tt In 480i/576i mode, the video aspect ratio for recording and output can be changed. Recording format 576/50i 576/25P
  • Panasonic AJ-PX380G | Operating Instructions - Page 58
    Chapter 4 Shooting - Adjustable settings when shooting Adjustable settings when shooting Configure the settings as necessary before you start shooting. Focus assist function The focus assist function enables you to focus the target easily. Expanded display, focus assist color display (in which the
  • Panasonic AJ-PX380G | Operating Instructions - Page 59
    Chapter 4 Shooting - Adjustable settings when shooting Level gauge function A level gauge that indicates the horizontal and vertical inclinations of the camera recorder can be displayed in the viewfinder. Horizontal direction Example) When correcting the inclination towards the left Vertical
  • Panasonic AJ-PX380G | Operating Instructions - Page 60
    Chapter 4 Shooting - Adjusting the white and black balance Adjusting the white and black balance To obtain high-quality video at all times using the camera, the white and black balance must be adjusted according to conditions. To obtain higher image quality, adjust in the order of AWB (white balance
  • Panasonic AJ-PX380G | Operating Instructions - Page 61
    . Increase the amount of light or increase gain. Decrease the amount of light or decrease gain. Select the appropriate filter or light source. Manual setting of color temperature The color temperature of white balance can be adjusted by the setting menu. 1 Set the color temperature in the main
  • Panasonic AJ-PX380G | Operating Instructions - Page 62
    Chapter 4 Shooting - Adjusting the white and black balance rr Message displayed in the viewfinder During adjustment Status Adjustment completed [ABB ACTIVE] [ABB OK] Message Remark ffThe adjusted value is automatically stored in memory. @@NOTE tt During black balance adjustment, the aperture
  • Panasonic AJ-PX380G | Operating Instructions - Page 63
    Chapter 4 Shooting - Setting the electronic shutter Setting the electronic shutter Setting the shutter mode and speed Switch the switch to set the shutter speed in the shutter mode. switch 1 Press the switch positioned at towards the side. 2 Press the <
  • Panasonic AJ-PX380G | Operating Instructions - Page 64
    Chapter 4 Shooting - Setting the electronic shutter Setting the synchro scan mode Perform the following steps to operate. Jog dial button switch 1 Press the switch from towards the side to set the camera to synchro scan mode [S/S]. 2 Change the setting value of the
  • Panasonic AJ-PX380G | Operating Instructions - Page 65
    Chapter 4 Shooting - Flash band compensation (FBC) function Flash band compensation (FBC) function The camera is equipped with a function for compensating and reducing band-like interference (called "flash band") that occurs due to the MOS pickup device when shooting in environments where flash
  • Panasonic AJ-PX380G | Operating Instructions - Page 66
    for enabling/disabling the rec during upload function. This setting is linked to the setting value in the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [REC DURING UPLOAD]. Assigns the function to display the upload list of the rec during upload function. To close the upload list, press the
  • Panasonic AJ-PX380G | Operating Instructions - Page 67
    Chapter 4 Shooting - Assigning functions to USER buttons @@NOTE tt The following functions are also turned off when the camera is turned off. [WFM]/[D.ZOOM x2]/[D.ZOOM x4]/[DRS]/[FBC]/[S.GAIN]/[ATW]/[ATW LOCK]/[SPOTLIGHT]/[BACKLIGHT]/[Y GET]/[USB MODE]/[PLAYLIST] tt Select the [BS CALL]/[TALK]
  • Panasonic AJ-PX380G | Operating Instructions - Page 68
    levels Selecting audio input and adjusting recording levels The camera supports independent 4-channel sound recording in all recording formats (HD, channels 1/2/3/4 is automatically adjusted. Also, you can adjust the level manually by setting it to [MANU]. Selecting audio input signals Select the
  • Panasonic AJ-PX380G | Operating Instructions - Page 69
    . It effectively softens or sharpens images, but in some cases, the whole image may become rough due to emphasized noise and edges. To avoid such problems, it is necessary not to add this effect on parts where emphasizing is not needed and keep the details of the parts. rr General settings
  • Panasonic AJ-PX380G | Operating Instructions - Page 70
    Chapter 4 Shooting - Adjusting image quality RB gain control function This function makes settings to add or reduce intensity of red and blue colors according to the position of the switch. The function works when the switch is at the position or when automatic white balance is
  • Panasonic AJ-PX380G | Operating Instructions - Page 71
    Chapter 4 Shooting - Adjusting image quality Color correction function This function sets color saturation and phase. It applies individual effect on 15 phases in an image. It can be set to individual color hue. Yl-R-R R Yl-R Yl-Yl-R R-R-Mg R-Mg Yl Mg G-Yl [(PHASE)] Mg-B [(SAT)] G B Cy-G
  • Panasonic AJ-PX380G | Operating Instructions - Page 72
    . ffWhen the / selector switch is set to , and [ON] is selected in the main menu → [SCENE FILE] → [KNEE SETTING] → [MANUAL KNEE] [KNEE MASTER POINT]: Sets the knee point position in 0.5% steps. [KNEE MASTER SLOPE]: Sets the knee inclination. [KNEE MASTER SLOPE Rch]: Sets the
  • Panasonic AJ-PX380G | Operating Instructions - Page 73
    Chapter 4 Shooting - Special recording functions Special recording functions You can use special recording functions such as pre-recording and loop recording by setting the menu. Pre-recording This function enables recording of video and audio from a fixed amount of time (approx. 3 seconds
  • Panasonic AJ-PX380G | Operating Instructions - Page 74
    Chapter 4 Shooting - Special recording functions One-shot recording Recording takes place once for the set amount of time. 1 Set all items in the main menu → [SYSTEM MODE]. 2 Select [ONE SHOT] in the main menu → [RECORDING SETUP] → [RECORDING]. 3 Set the time with [ONE SHOT TIME] in the main menu
  • Panasonic AJ-PX380G | Operating Instructions - Page 75
    → [RECORDING SETUP] → [ONE CLIP REC]. @@NOTE tt Combining a clip cannot be ended by pressing the or button on the remote control unit (AJ‑RC10G) and on the extension control unit (AG‑EC4G). Cueing up linked parts of clips Each time recording starts, a text memo is automatically added to
  • Panasonic AJ-PX380G | Operating Instructions - Page 76
    is edited using nonlinear editing software, etc., the software may not operate properly depending on the type of software. ffRefer to the support desk at the following website for the latest information on software whose operability has been confirmed. http://pro-av.panasonic.net/ Simultaneous
  • Panasonic AJ-PX380G | Operating Instructions - Page 77
    tt Hot swap playback is not supported. Chapter 4 Shooting - Special recording functions Recording check function ffAfter recording ends, press the button of the lens to automatically play back approximately three seconds
  • Panasonic AJ-PX380G | Operating Instructions - Page 78
    System modes and recording functions The following shows the relationship between system modes and recording functions on this camera. ff"l" are supported, and "-" are not supported. [LINE&FREQ] [1080‑59.94P] [1080‑50P] [1080‑23.98PsF] [1080‑59.94i] System mode [REC FORMAT] [CAMERA MODE] [AVC
  • Panasonic AJ-PX380G | Operating Instructions - Page 79
    [LINE&FREQ] [1080‑50i] [720‑59.94P] [720‑50P] [480‑59.94i] [576‑50i] [LINE&FREQ] [1080‑59.94P] [1080‑50P] [1080‑23.98PsF] Chapter 4 Shooting - Multi formats System mode [REC FORMAT] [CAMERA MODE] [AVC‑I100/50i] - [AVC‑I50/50i] - [AVC‑G50/50i] - [AVC‑G25/50i] - [AVC‑G12/50i] - [DVCPRO
  • Panasonic AJ-PX380G | Operating Instructions - Page 80
    [LINE&FREQ] [1080‑59.94i] [1080‑50i] [720‑59.94P] [720‑50P] [480‑59.94i] [576‑50i] [LINE&FREQ] [1080‑59.94P] [1080‑50P] Chapter 4 Shooting - Multi formats System mode [REC FORMAT] [CAMERA MODE] [AVC‑I100/60i] - [AVC‑I50/60i] - [AVC‑G50/60i] - [AVC‑G25/60i] - [AVC‑G12/60i] - [DVCPRO HD/
  • Panasonic AJ-PX380G | Operating Instructions - Page 81
    Chapter 4 Shooting - Multi formats [LINE&FREQ] [1080‑23.98PsF] [1080‑59.94i] [1080‑50i] [720‑59.94P] [720‑50P] [480‑59.94i] [576‑50i] System mode [REC FORMAT] [CAMERA MODE] [AUDIO SMPL RES] [AVC‑I100/24PN] [AVC‑G50/24PN] [AVC‑G25/24PN] [AVC‑G12/24PN] [AVC‑I100/60i] [AVC‑I50/60i] [AVC‑G50/60i] [
  • Panasonic AJ-PX380G | Operating Instructions - Page 82
    Chapter 4 Shooting - Multi formats Setting Operation mode Interval recording One-shot recording Loop recording Standard recording SDI input recording Recording setting (setting menu) [REC SIGNAL] [RECORDING] [CAM] [CAM] [CAM] [CAM] [SDI] [INTERVAL] [ONE SHOT] [LOOP] [NORMAL] Disabled
  • Panasonic AJ-PX380G | Operating Instructions - Page 83
    Chapter 4 Shooting - Multi formats Recording/playback and output format list ffFrequencies in signal methods are annotated without fractions. -- 59.94 → 60 / 23.98 → 24 / 29.97 → 30 [LINE&FREQ] [1080‑59.94P] [1080‑59.94i] [1080‑50P] [1080‑50i] [1080‑23.98PsF] [720‑59.94P] [720‑50P] [480‑59.94i] [
  • Panasonic AJ-PX380G | Operating Instructions - Page 84
    Chapter 4 Shooting - Dual codec recording Dual codec recording Recording in different formats for main recording and sub recording can be performed on the camera. For sub recording, HD proxy (AVC‑LongG 6 format) and SD proxy can be selected according to the [LINE&FREQ] setting. The file format is
  • Panasonic AJ-PX380G | Operating Instructions - Page 85
    , use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. Refer to our support desk at the following website for the latest information not included in these operating instructions. http://pro-av.panasonic.net/ When recording the proxy data to an SD memory card, always format the
  • Panasonic AJ-PX380G | Operating Instructions - Page 86
    Chapter 4 Shooting - Dual codec recording Proxy data recording time (approximate) Recording mode [AVC-G6 2CH MOV] [SHQ 2CH MOV] [HQ 2CH MOV] [LOW 2CH MOV] Total recording rate Approx. 6 Mbps Approx. 5060 kbps Approx. 1650 kbps Approx. 950 kbps Recording time (per 1 GB) Approx. 13 min Approx. 25
  • Panasonic AJ-PX380G | Operating Instructions - Page 87
    Chapter 4 Shooting - Dual codec recording Error displays about proxy data recordings If an error occurs during recording the proxy data, check the entries in the following table and take necessary actions. Error displays (Viewfinder) [PROXY ERROR] or [PROXY REC WARNING] [SD 0 min] [SD END] [SD WR
  • Panasonic AJ-PX380G | Operating Instructions - Page 88
    either [SHQ (QoS)] or [AVC-G (QoS)]. In addition, if [SHQ (QoS)] or [AVC-G (QoS)] is selected, the terminal that receives streaming data needs to support the QoS function. tt The streaming video from the camera will be a black screen in the playback mode (including the recording check). - 88 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 89
    streaming output The following shows the relationship between system modes and streaming modes on this camera. ff"l": Supported; "-": Not supported [LINE&FREQ] [1080‑59.94i] [1080‑50i] [720‑59.94P] [720‑50P] [SYSTEM MODE] [REC FORMAT] [AVC‑I100/60i] [AVC‑I50/60i] [AVC‑G50/60i] [
  • Panasonic AJ-PX380G | Operating Instructions - Page 90
    Handling setting data Chapter 4 Shooting - Handling setting data Setting data file configuration [F1:] to [F6:] scene files can be saved internally on the camera according to scene file numbers. Scene file data ([F1:] to [F6:]) can be saved as a file, and up to eight files can be saved on the SD
  • Panasonic AJ-PX380G | Operating Instructions - Page 91
    Chapter 4 Shooting - Handling setting data 2 Insert the SD memory card into the SD memory card slot with the label side of the card upward, and close the slot cover. @@NOTE tt Before inserting the SD memory card, confirm that the orientation of the SD memory card is correct. If the SD memory card is
  • Panasonic AJ-PX380G | Operating Instructions - Page 92
    Chapter 4 Shooting - Handling setting data Loading written user data 1 Select [LOAD] in the main menu → [OTHER FUNCTIONS] → [USER FILE]. The confirmation screen is displayed. If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete. 2 Select
  • Panasonic AJ-PX380G | Operating Instructions - Page 93
    Chapter 4 Shooting - Handling setting data 3 Select [YES] and press the button (or the jog dial button). The selected scene file is restored to the factory settings. Changing the scene file title 1 Select the scene file to change the title in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI
  • Panasonic AJ-PX380G | Operating Instructions - Page 94
    Chapter 4 Shooting - Handling setting data Saving and loading user files Select [SAVE] or [LOAD] in the main menu → [CARD FUNCTIONS] → [USER FILE]. The operations onward are the same as for scene files. - 94 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 95
    Chapter 4 Shooting - Selection of external reference signal and generator lock setting Selection of external reference signal and generator lock setting Locking the video signal to the external reference signal The video signal output from the camera can be locked to the reference signal supplied
  • Panasonic AJ-PX380G | Operating Instructions - Page 96
    Chapter 4 Shooting - Setting the time data Setting the time data The camera provides time codes, user bits, and date and time (real time) data as time data, and they are recorded in the frame in sync with video. They are also recorded as data for clip metadata files. Definition of time data rr Time
  • Panasonic AJ-PX380G | Operating Instructions - Page 97
    Chapter 4 Shooting - Setting the time data [LINE&FREQ] [1080‑23.98PsF] [720‑59.94P] Setting [REC FORMAT] [AVC‑I100/24PN] [AVC‑G50/24PN] [AVC‑G25/24PN] [AVC‑G12/24PN] [AVC‑I100/60P] [AVC‑I50/60P] [AVC‑G50/60P] [AVC‑G25/60P] [AVC‑G12/60P] [AVC‑I100/30PN] [DVCPRO HD/60P] [CAMERA MODE] - - [AVC‑I100
  • Panasonic AJ-PX380G | Operating Instructions - Page 98
    [LINE&FREQ] [720‑59.94P] [720‑50P] [480‑59.94i] [576‑50i] Recording of user bits [LINE&FREQ] [1080‑59.94P] [1080‑59.94i] [1080‑50P] [1080‑50i] [1080‑23.98PsF] [720‑59.94P] Chapter 4 Shooting - Setting the time data Setting [REC FORMAT] [AVC‑I100/60P] [AVC‑I50/60P] [AVC‑G50/60P] [AVC‑G25/60P] [AVC‑
  • Panasonic AJ-PX380G | Operating Instructions - Page 99
    Chapter 4 Shooting - Setting the time data [LINE&FREQ] [720‑50P] [480‑59.94i] [576‑50i] Setting [REC FORMAT] [AVC‑I100/50P] [AVC‑I50/50P] [AVC‑G50/50P] [AVC‑G25/50P] [AVC‑G12/50P] [AVC‑I100/25PN] [DVCPRO HD/50P] [DVCPRO50/60i] [DVCPRO/60i] [DV/60i] [DVCPRO50/50i] [DVCPRO/50i] [DV/50i] [CAMERA
  • Panasonic AJ-PX380G | Operating Instructions - Page 100
    [LINE&FREQ] [576‑50i] Setting [REC FORMAT] [DVCPRO50/50i] [DVCPRO/50i] [DV/50i] Chapter 4 Shooting - Setting the time data [CAMERA MODE] [50i] [25P] UB for TC OUT LTC UB is output. Output UB LTC UB for HD SDI None VITC UB for HD SDI None User bits settings Sets the user bits to be recorded
  • Panasonic AJ-PX380G | Operating Instructions - Page 101
    Chapter 4 Shooting - Setting the time data - [−]: The value of the digit to be set is incremented by one. - [RST]: The value of the digit to be set is decremented by one. 5 Press the button, enter the values of user bits, and exit the user bits settings screen. 6 Select [USER] in the main
  • Panasonic AJ-PX380G | Operating Instructions - Page 102
    Settable time code range Video signal For 59.94 Hz (except for 24PN) 24PN For 50 Hz Chapter 4 Shooting - Setting the time data 00:00:00:00 to 23:59:59:29 00:00:00:00 to 23:59:59:23 00:00:00:00 to 23:59:59:24 Setting range @@NOTE tt When used in 24PN mode, the time code settings are adjusted in
  • Panasonic AJ-PX380G | Operating Instructions - Page 103
    Chapter 4 Shooting - Setting the time data tt For all devices, set the main menu → [IN/OUT SEL] → [TC OUTPUT REF] to [RECORDING], and the main menu → [IN/OUT SEL] → [GENLOCK SETTING] → [GL PHASE] to [COMPOSITE]. tt If you set [RECORDING] in the main menu → [IN/OUT SEL] → [TC OUTPUT REF], the two
  • Panasonic AJ-PX380G | Operating Instructions - Page 104
    Chapter 4 Shooting - Setting the time data Supplying the time code externally You can supply the output time codes to a VTR or other recording device from the camera by matching the camera images or the replayed images. terminal, terminal, or terminal VIDEO
  • Panasonic AJ-PX380G | Operating Instructions - Page 105
    Chapter 4 Shooting - Setting the time data rr When the camera recording format is 480i/576i Camera usage conditions Camera settings Genlock input and camera output phase Image and standard signals supplied externally Genlock input [GL PHASE] SDI output (HD) Video output and SDI output (SD) Time
  • Panasonic AJ-PX380G | Operating Instructions - Page 106
    Chapter 4 Shooting - Convenient shooting functions Convenient shooting functions Scan reverse shooting Set [ON] in the main menu → [SYSTEM MODE] → [SCAN REVERSE] to display and record the image in vertically or horizontally reverse. Zebra patterns display The camera can display two types of
  • Panasonic AJ-PX380G | Operating Instructions - Page 107
    displayed on the screen. [SQUEEZE]: Camera images are compressed in the horizontal direction when recording. Replaying recorded images on a TV monitor that supports a wide screen will convert the images to an aspect ratio of 16:9. Dynamic range stretcher function You can increase the dynamic range
  • Panasonic AJ-PX380G | Operating Instructions - Page 108
    Chapter 4 Shooting - Convenient shooting functions Confirmation of return video signal in the viewfinder The return video signal input to the terminal can be checked in the viewfinder while the // button or the button on the lens is held down. To operate
  • Panasonic AJ-PX380G | Operating Instructions - Page 109
    Chapter 5 Playback Data including additional information such as images, audio, text memo, and metadata that are created from one shooting are saved as a clip. You can play back and edit clips with the camera.
  • Panasonic AJ-PX380G | Operating Instructions - Page 110
    Chapter 5 Playback - Normal and variable speed playback Normal and variable speed playback Playback of clips can be performed on the thumbnail screen. To display the thumbnail screen, press the button. rr Normal speed playback Color playback images can be viewed on the viewfinder by
  • Panasonic AJ-PX380G | Operating Instructions - Page 111
    ] The maximum number of overwrites on the P2 card has been exceeded. ff[DIR ENTRY NG] The directory structure on the P2 card is not supported. - 111 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 112
    white when the wired LAN is not connected. (Yellow): Displayed in yellow when the wired LAN is connected. (Red): Displayed in red when there is a problem with the connection of wired LAN. (Gray): Displayed in gray when the wireless LAN is not activated properly. (White): Displayed in white when the
  • Panasonic AJ-PX380G | Operating Instructions - Page 113
    Chapter 5 Playback - Thumbnail operations 14 Text memo indicator Displayed for clips with text memo data attached. 15 Edit copied clip indicator Displayed for the edit copied clip. 16 Wide clip indicator Displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in
  • Panasonic AJ-PX380G | Operating Instructions - Page 114
    Chapter 5 Playback - Thumbnail operations Setting thumbnail screen display You can customize the thumbnail screen according to usage. Setting example for thumbnail screen ([INDICATOR]) 1 Select [THUMBNAIL SETUP] in the main menu → [CLIP]. The thumbnail setting items ([INDICATOR], [DATA DISPLAY], [
  • Panasonic AJ-PX380G | Operating Instructions - Page 115
    Chapter 5 Playback - Thumbnail operations 3 Press the button to enter the item menu. (Fig. 2) The selected item has a check mark on it. 4 Press the button. Pressing the button will check unchecked items and uncheck items that are already checked. @@NOTE tt Property items can be
  • Panasonic AJ-PX380G | Operating Instructions - Page 116
    Chapter 5 Playback - Thumbnail operations @@NOTE tt You can attach a shot mark during recording. tt Add shot marks after recording stops to attach the shot mark to the most recently recorded clip. For details, refer to "Shot mark recording function" (page 77). tt When adding a shot mark to or
  • Panasonic AJ-PX380G | Operating Instructions - Page 117
    Chapter 5 Playback - Thumbnail operations 2 Move the cursor over the text memo to be deleted and press the button. 3 Select [DELETE] in the main menu → [CLIP]. 4 Use the cursor buttons to select [YES]. This deletes the text memo. Using a text memo to divide a clip and copy the necessary
  • Panasonic AJ-PX380G | Operating Instructions - Page 118
    Chapter 5 Playback - Thumbnail operations @@NOTE tt Incomplete clip indicators will remain displayed when only some clips are reconnected, unless all the constituent clips of the original clip are reconnected. Copying clips Selected clips can be copied to a P2 card in the desired slot, a connected
  • Panasonic AJ-PX380G | Operating Instructions - Page 119
    Chapter 5 Playback - Thumbnail operations *2 When entering [MEMO], make sure to enter [TEXT]. It is not possible to record only [PERSON] (the person inputting the memo), or [OFFSET] (the recording position). @@NOTE tt Files which were not edited by P2 Viewer Plus are displayed as [UNKNOWN DATA!] and
  • Panasonic AJ-PX380G | Operating Instructions - Page 120
    rr [TYPE1] (factory settings) Chapter 5 Playback - Thumbnail operations Status of clip metadata When clip metadata has been loaded When no clip metadata has been loaded, or when setting disables recording of loaded clip metadata [USER CLIP NAME] to be recorded Uploaded data Same as [GLOBAL CLIP
  • Panasonic AJ-PX380G | Operating Instructions - Page 121
    Chapter 5 Playback - Thumbnail operations Formatting SD memory cards SD memory cards can also be formatted in the thumbnail screen. With an SD memory card inserted into the camera, perform the following operation. 1 Select [FORMAT] in the main menu → [CLIP]. ffSelect [SD CARD], and press the
  • Panasonic AJ-PX380G | Operating Instructions - Page 122
    Modifying recorded clip metadata Chapter 5 Playback - Thumbnail operations Fig. 1 Fig. 2 1 Display the metadata details window for the clip to be modified on the clip properties screen. 2 Use the cursor buttons to place the cursor on the item to be modified. (Fig. 1) The items of the metadata
  • Panasonic AJ-PX380G | Operating Instructions - Page 123
    ]: The maximum number of overwrites on the P2 card has been exceeded. [DIR ENTRY NG]: The directory structure on the P2 card is not supported. The warning can be checked on the P2 card detailed information in "P2 card status (remaining capacity)" (page 123). (Fig. 2) 4 Total slot memory remaining
  • Panasonic AJ-PX380G | Operating Instructions - Page 124
    set to device and the CPS password set to microP2 memory card differ. To temporarily use a microP2 memory card whose authentication has failed, manually enter the CPS password authorized for the microP2 memory card in accordance with the following procedures. If the code matches, you can use the
  • Panasonic AJ-PX380G | Operating Instructions - Page 125
    of display Indicates whether an SD memory card is formatted according to the SD/SDHC/SDXC standard. ff[SUPPORTED]: Complies with SD/SDHC/SDXC standards ff[NOT SUPPORTED]: Does not comply with SD/SDHC/SDXC standards Used capacity (bytes) Available space (bytes) Total capacity (bytes) Remaining
  • Panasonic AJ-PX380G | Operating Instructions - Page 126
    Chapter 6 Menu Operations This chapter describes how to operate the camera menus, the structure, and details of the setting menu.
  • Panasonic AJ-PX380G | Operating Instructions - Page 127
    Chapter 6 Menu Operations - Setting menu structure Setting menu structure Menu types and how to open them Menu type [USER MENU] Main menu [OPTION MENU] Use In the main menu → [USER MENU SEL], you can select the desired items and pages and register to [USER MENU]. You can select them depending on
  • Panasonic AJ-PX380G | Operating Instructions - Page 128
    Setting menu display Chapter 6 Menu Operations - Setting menu display Setting menu basic operations You can change camera settings using the setting menu according to the shooting scene and recording details. The menu is divided into the main menu, submenu, and setting item menu. Set data are
  • Panasonic AJ-PX380G | Operating Instructions - Page 129
    Chapter 6 Menu Operations - Setting menu display 3 Press the jog dial button (or the button). ffThe confirmation screen is displayed depending on the menu item. Select the process using the cursor buttons (`/{/Y/I), and press the button. A checkmark is placed in front of the set item.
  • Panasonic AJ-PX380G | Operating Instructions - Page 130
    Menu list Chapter 6 Menu Operations - Menu list [SCENE FILE] Configure the settings regarding scene files. This menu is used to set fine image quality settings of the camera images, select scene files, and read/write scene file data to the internal memory. These menu items cannot be set when the
  • Panasonic AJ-PX380G | Operating Instructions - Page 131
    Chapter 6 Menu Operations - Menu list Item [SKIN TONE DTL C] [SKIN TONE ZEBRA] [SKIN TONE DTL SETTING] [DETECT TABLE] [SKIN TONE GET] [SKIN DTL EFFECT] [I CENTER] [I WIDTH] [Q WIDTH] [Q PHASE] [RB GAIN CONTROL SETTING] [R GAIN AWB PRE] [B GAIN AWB PRE] [R GAIN AWB A] [B GAIN AWB A] [R
  • Panasonic AJ-PX380G | Operating Instructions - Page 132
    Item [B Gain] [G AXIS] [COLOR TEMP Bch SETTING] [COLOR TEMP] [R Gain] [B Gain] [G AXIS] [CHROMA LEVEL] [CHROMA PHASE] [MATRIX] [MATRIX SETTING] [MATRIX R‑G] [MATRIX R‑B] [MATRIX G‑R] [MATRIX G‑B] [MATRIX B‑R] [MATRIX B‑G] [COLOR CORRECTION [R (SAT)] SETTING] [R (PHASE)] [R‑R‑Mg (SAT
  • Panasonic AJ-PX380G | Operating Instructions - Page 133
    Item [R‑Mg (PHASE)] [Mg (SAT)] [Mg (PHASE)] [Mg‑B (SAT)] [Mg‑B (PHASE)] [B (SAT)] [B (PHASE)] [B‑Cy (SAT)] [B‑Cy (PHASE)] [Cy (SAT)] [Cy (PHASE)] [Cy‑G (SAT)] [Cy‑G (PHASE)] [G (SAT)] [G (PHASE)] [G‑Yl (SAT)] [G‑Yl (PHASE)] [Yl (SAT)] [Yl (PHASE)] [Yl‑Yl‑R (SAT)] [Yl‑Yl‑R (PHASE)] [Yl‑R (SAT)] [Yl‑R
  • Panasonic AJ-PX380G | Operating Instructions - Page 134
    : [OFF] [B. GAMMA RANGE] Sets the maximum level of compression/expansion. [1]: About 20% [2]: About 30% [3]: About 40% ffFactory setting: [1] [KNEE SETTING] [MANUAL KNEE] Selects the operation mode when the / selector switch is set to . [ON], [OFF] ffFactory setting: [ON
  • Panasonic AJ-PX380G | Operating Instructions - Page 135
    IN/OUT SEL] → the [SDI OUT2/IN SEL] setting is disabled. Supporting video format HD: 1080/59.94i, 1080/50i, 720/59.94P, 720/50P SD: 480/59.94i, 576 /50i Supporting audio format Refer to "Digital audio" (page 220). ffFactory setting: [CAM] Once the
  • Panasonic AJ-PX380G | Operating Instructions - Page 136
    [SETUP] Item [SHOOTING MODE] [BS DIRECT MODE] Chapter 6 Menu Operations - Menu list Description of settings Sets the setup level of 480i video signals. [0%], [7.5%A] Sets the shooting mode according to the shooting environment. [NORMAL]: Selects the shooting mode for an environment at normal
  • Panasonic AJ-PX380G | Operating Instructions - Page 137
    [ATW TARGET R] Item [ATW TARGET B] [W.BAL PRESET] [W.BAL VAR] [FOCUS ASSIST MODE] [FOCUS IN COLOR SETTING] [PEAKING COLOR] [PICTURE B/W] [EXPAND MODE] [IRIS GAIN] [IRIS GAIN VALUE] [A.IRIS WINDOW] [AGC] [AGC LIMIT] [AGC POINT] [AUTO KNEE SW] [WFM MODE] [BARS TYPE] Chapter 6 Menu
  • Panasonic AJ-PX380G | Operating Instructions - Page 138
    Chapter 6 Menu Operations - Menu list [RECORDING SETUP] These are various types of setting items when performing camera recording and playback. Select the recording format. [REC MEDIA] [FILE SPLIT] [RECORDING] [RECORDING SETTING] [PRE REC] [ONE CLIP REC] [SIMUL REC] [DUAL CODEC SETTING] Item [
  • Panasonic AJ-PX380G | Operating Instructions - Page 139
    Item [QoS MAX RATE] [QoS MIN RATE] [STREAMING LATENCY] [START TEXT MEMO] [DF MODE] [UBG MODE] [VITC UBG MODE] [REC META DATA] [LOAD] [RECORD] [USER CLIP NAME] [CARD SERIAL] [INITIALIZE] [PROPERTY] [LANGUAGE] Chapter 6 Menu Operations - Menu list Description of settings Sets the maximum bitrate
  • Panasonic AJ-PX380G | Operating Instructions - Page 140
    [REPOSITION] Item [DELETE] [FORMAT] [FORMAT(STORAGE)] [COPY] [EXPORT] [IMPORT] [REPAIR] [RE‑CONNECT] [EXCH. THUMBNAIL] [EXPLORE] [AUTHENTICATE] [CHANGE PARTITION NAME] [DELETE LAST PARTITION] [DELETE FOLDER] [PROPERTY] [CLIP PROPERTY] [CARD STATUS] [CPS PASSWORD] [SD CARD] [REMAIN SETUP] [
  • Panasonic AJ-PX380G | Operating Instructions - Page 141
    Item [THUMBNAIL SETUP] [INDICATOR] [DATA DISPLAY] [THUMBNAIL SIZE] [PB POSITION] [PROPERTY DISP.] [THUMBNAIL INFO.] [TEXT MEMO IND] [STORAGE COPY SETUP] [VERIFY] Chapter 6 Menu Operations - Menu list Description of settings Selects an item to display and press the button. Checked items are
  • Panasonic AJ-PX380G | Operating Instructions - Page 142
    Chapter 6 Menu Operations - Menu list [AUDIO SETUP] Configure the settings regarding audio input/output. [INPUT SETTING] [RECORDING CH SETTING] Item [FRONT MIC POWER] [FRONT MIC LVL] [REAR MIC CH1 LVL] [REAR MIC CH2 LVL] [WIRELESS WARN] [WIRELESS TYPE] [FRONT VR CH1] [FRONT VR CH2] [FRONT VR CH3
  • Panasonic AJ-PX380G | Operating Instructions - Page 143
    Item [LIMITER CH3] [LIMITER CH4] [HEADROOM] [OUTPUT SETTING] [TEST TONE] Chapter 6 Menu Operations - Menu list Description of settings Enables/disables the limiter for audio channel 3. [ON], [OFF] ffFactory setting: [OFF] Enables/disables the limiter for audio channel 4. [ON], [OFF] ffFactory
  • Panasonic AJ-PX380G | Operating Instructions - Page 144
    Item [GENLOCK SETTING] [GL PHASE] [H PHASE] [DOWNCON SETTING] [DETAIL] [H.DTL LEVEL] [V.DTL LEVEL] [DTL CORING] [H.DTL FREQ] [MON OUT ZEBRA] [TC IN/OUT SEL] [TC OUT] [TC OUTPUT REF] [NETWORK SETUP] Configure the settings regarding the network. Item [USB MODE SELECT] [USB MODE] [NETWORK SEL] [
  • Panasonic AJ-PX380G | Operating Instructions - Page 145
    account name. Registering of new accounts, deleting accounts, or changing password can also be performed. [FTP CLIENT SERVICE] [SETTING DATA] ff[SERVER URL] Sets the source from where client service settings are acquired. [INTERNAL]: Uses the setting value set on the camera. [SD CARD]: Uses the
  • Panasonic AJ-PX380G | Operating Instructions - Page 146
    set to [INFRA], this item can be set. [SELECT]: Selects from the access point list. [MANUAL]: For entering the access point manually. ffFactory setting: [SELECT] Displays network name (SSID). ffFactory setting: [AJ‑PX380] (When the main menu → [NETWORK SETUP] → [WIRELESS PROPERTY] → [TYPE] is set to
  • Panasonic AJ-PX380G | Operating Instructions - Page 147
    [NETWORK TOOLS] Item [LOG DISPLAY] [STATUS DISPLAY] [INITIALIZE] [PING] Chapter 6 Menu Operations - Menu list Description of settings Displays the connection log. Displays the network status. Restores the network setting status to the factory settings. Checks network connection using PING commands
  • Panasonic AJ-PX380G | Operating Instructions - Page 148
    [BATTERY] Item [REC DURING UPLOAD] [STREAMING] [OTHER DISPLAY] [DISPLAY SETTING] [IRIS] [GAIN] [SHUTTER] [WHITE BALANCE] [ND] [EXTENDER] [Y GET] [D.ZOOM] [SCENE FILE] [CAC] [DRS] [FBC] [SHOOTING MODE] [PB MODE] [SYSTEM MODE] [REC FORMAT] [FRAME RATE] [ASPECT] [REC MEDIA] [
  • Panasonic AJ-PX380G | Operating Instructions - Page 149
    full at 70%. [100%]: Displays as full at 100%. ffFactory setting: [70%] Selects whether to set the near end voltage of a battery. [AUTO]: Automatically set. [MANUAL]: Manually set. ffFactory setting: [AUTO] - 149 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 150
    steps of 0.1 V when [ENDURA10] is selected in the main menu → [BATTERY SETUP] → [BATTERY SELECT]. This item is enabled when [BATTERY MODE] is set to [MANUAL]. [12.0V]...[15.0V] ffFactory setting: [13.4V] [PAG L96e NEAR END] Selects the near end voltage in steps of 0.1 V when [PAG L96e] is selected
  • Panasonic AJ-PX380G | Operating Instructions - Page 151
    Chapter 6 Menu Operations - Menu list Item [ENDURA STAT NEAR END] [ENDURA STAT END] Description of settings Selects the near end percent value. When the battery charge level percentage cannot be detected, this will follow the near end voltage value set for [TYPE A]. [4%], [5%], [6%], [7%], [8%],
  • Panasonic AJ-PX380G | Operating Instructions - Page 152
    . This cannot be executed in the following cases. ffWhile displaying the thumbnails ffDuring playback ffWhen the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [REC DURING UPLOAD] is set to [ENABLE], and there is a clip to be uploaded [MAINTENANCE] These are items for performing maintenance
  • Panasonic AJ-PX380G | Operating Instructions - Page 153
    [OPTION MENU] list Chapter 6 Menu Operations - [OPTION MENU] list [AREA SETTING] Select the region in which you use the camera. The following settings can be made on the [AREA SELECT] screen. [NTSC]: Selects an NTSC region other than Japan. [NTSC (J)]: Selects Japan. [PAL]: Selects the PAL region
  • Panasonic AJ-PX380G | Operating Instructions - Page 154
    Chapter 7 SmartUI operation This chapter describes an interface consisting of an LCD display and multiple switches. It enables scene file setting, audio input/output setting, time code setting and so on.
  • Panasonic AJ-PX380G | Operating Instructions - Page 155
    Chapter 7 SmartUI operation - SmartUI basic operations SmartUI basic operations Buttons used with SmartUI HOLD COUNTER RESET MONITOR SEL LIGHT 1 TCG NDF SLAVE P -REC CAM 2 7 MEDIA CH1 A E F BATT CH2 E F 0 AUDIO -10 -18 3 -20 -30 SETUP dB 12 4 /REW STOP FF/ PLAY/PAUSE HOME 5
  • Panasonic AJ-PX380G | Operating Instructions - Page 156
    Chapter 7 SmartUI operation - SmartUI menu structure SmartUI menu structure HOME CAM CAMERA CAM CAM01 : STATUS CAM02 : SCENE FILE AUDIO SETUP AUDIO SETUP AUDIO AUD01 : LEVEL AUD02 : INPUT AUD03 : MONI SETUP SET01 : TC/UB SET02 : MON OUT SELECT SET03 : MON OUT SETUP SET04 : LCD - 156 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 157
    Chapter 7 SmartUI operation - SmartUI menu operation overview SmartUI menu operation overview HOME HOLD COUNTER RESET MONITOR SEL LIGHT TCG[R] NDF R-RUN CAM MEDIA CH1 A E F BATT CH2 E F 0 -10 -18 -20 AUDIO -30 SETUP dB 12 HOME /REW STOP FF/ PLAY/PAUSE HOME HOLD COUNTER RESET
  • Panasonic AJ-PX380G | Operating Instructions - Page 158
    aberration compensation function Displays whether the chromatic aberration compensation function is activated. Displayed only when the lens that supports the chromatic aberration compensation function is attached. [CAC ACTIVE] 2 Focus control information Displays the focus control information
  • Panasonic AJ-PX380G | Operating Instructions - Page 159
    . ffFactory setting: [REAR] [LVL] Selects the method to adjust the recording level for audio channel 1. [AUTO] Enables automatic adjustment. [MANU] Enables manual adjustment. The setting contents are the same as [AUD01:LEVEL]. ffFactory setting: [AUTO] [IN] Selects the input signal to be recorded
  • Panasonic AJ-PX380G | Operating Instructions - Page 160
    Corresponding button button button Chapter 7 SmartUI operation - SmartUI menu list Setting details and setting value [LVL] Selects the method to adjust the recording level for audio channel 4. The setting contents are the same as audio channel 1. [CH1/2] Toggles the
  • Panasonic AJ-PX380G | Operating Instructions - Page 161
    Chapter 7 SmartUI operation - SmartUI menu list Corresponding button button button button button button button Setting details and setting value [TC_MD] Selects the advance setting mode for the built-in time code generator. [F‑RUN] Use
  • Panasonic AJ-PX380G | Operating Instructions - Page 162
    selection when [MON CHAR] is selected in the main menu → [IN/OUT SEL] → [SDI OUT1 CHAR]. This setting is disabled when the remote control unit (AJ‑RC10G), the extension control unit (AG‑EC4G), or the remote operation panel (AK‑HRP200G) is connected, and the setting on the remote control unit, the
  • Panasonic AJ-PX380G | Operating Instructions - Page 163
    Chapter 8 Display Details displayed on the viewfinder are described.
  • Panasonic AJ-PX380G | Operating Instructions - Page 164
    Chapter 8 Display - Screen status display Screen status display The viewfinder displays not only the video, but also the messages that indicate the camera settings and operation status, a center marker, safety zone marker, zebra patterns, and other information. Configuration of status display on
  • Panasonic AJ-PX380G | Operating Instructions - Page 165
    LAN is not connected (unlinked state) ff[WLAN ]: When there is a problem with the wireless LAN connection ff[LAN]: When the wired LAN is connected (link When the wired LAN is not connected (unlinked state), or when there is a problem ff[4G/LTE]: During 4G/LTE connection ff[4G/LTE ]: When 4G/LTE
  • Panasonic AJ-PX380G | Operating Instructions - Page 166
    Chapter 8 Display - Screen status display 10 Remote control display in an IP connection The remote control status in an IP connection is displayed when main menu → [NETWORK SETUP] → [NETWORK FUNC] → [IP REMOTE] is set to [ENABLE]. ff[IP REMOTE] (flashing): Displayed during connection waiting status
  • Panasonic AJ-PX380G | Operating Instructions - Page 167
    Chapter 8 Display - Screen status display 24 Zoom position display Displays the zoom position from [Z000] (maximum wide angle) to [Z999] (maximum zoom). Note, however, that this item is not displayed in the case of lenses without a zoom position return even if it is set to be displayed. When a
  • Panasonic AJ-PX380G | Operating Instructions - Page 168
    where the recording is being instructed for an external device ff[SDI&]: Status where recording stop is being instructed for an external device Displays LTE ]: When there is a problem with the 4G/LTE connection @@NOTE tt Depending on the USB modem that is supported, vertical bars that indicate the
  • Panasonic AJ-PX380G | Operating Instructions - Page 169
    Chapter 8 Display - Screen status display No Item Shooting 6 Recording format display l 7 Letterbox recording display l 8 Streaming mode status display l 9 Network mode status display l 10 Remote control display in an IP connection l 11 USER button information display l 12 BS direct
  • Panasonic AJ-PX380G | Operating Instructions - Page 170
    displayed are as follows: [ACTIVE]/[ACCESSING]/[INFO READING]/[FULL]/[PROTECTED]/[NOT SUPPORTED]/ [FORMAT ERROR]/[AUTH NG]/[REC IMPOSSIBLE]/[NO CARD] For details, LEVEL> dial is enabled on the channel to which [VR] (manual adjustment by adjustment dial) is displayed in [LEVEL]. Displays the limiter
  • Panasonic AJ-PX380G | Operating Instructions - Page 171
    when operation of CAC has stopped. ff[CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported. ff[LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete. ff[CAC FILE DATA NOT FOUND]: Displayed
  • Panasonic AJ-PX380G | Operating Instructions - Page 172
    Chapter 9 Connecting to External Devices This chapter describes the external devices that can be connected to the camera.
  • Panasonic AJ-PX380G | Operating Instructions - Page 173
    Chapter 9 Connecting to External Devices - Connecting to video equipment/monitor Connecting to video equipment/monitor Video equipment or monitor can be connected as shown in the following figure. Audio pin cable*1 HDMI cable*2 Video equipment/monitor BNC cable (composite/SDI)*3 *1 Cables are
  • Panasonic AJ-PX380G | Operating Instructions - Page 174
    . For installation procedure of the driver, refer to the installation manual on the website. For the latest information on the driver, visit the . http://pro-av.panasonic.net/ tt The camera supports only USB 2.0. Ensure your computer supports USB 2.0. tt When connecting the camera to a computer
  • Panasonic AJ-PX380G | Operating Instructions - Page 175
    supply to the camera to avoid problems in copying or formatting operations. tt The terminal also supports USB bus power (5 V, 0.5 format to read/write data with high speed by card. Indicates P2 STORE (AJ‑PCS060G). Writing is disabled. Storage devices where the primary partition is FAT16
  • Panasonic AJ-PX380G | Operating Instructions - Page 176
    devices with a capacity of 2 TB or more cannot be formatted. @@NOTE tt Storage devices with capacities exceeding 2 TB (2048 GB) are not supported. tt Use a storage device within its guaranteed operational range (temperature, etc.). tt Do not place the storage device in a location that is unstable
  • Panasonic AJ-PX380G | Operating Instructions - Page 177
    Chapter 9 Connecting to External Devices - Connection through the terminal Exporting to a storage device by card You can export to a storage device (write to a storage device from a P2 card) by P2 card. The copy results and the maximum number of items that can be copied vary depending on
  • Panasonic AJ-PX380G | Operating Instructions - Page 178
    Chapter 9 Connecting to External Devices - Connection through the terminal tt To copy to a [TYPE S] storage device, one or more partitions are required. You can either format the storage device to [FAT] or perform copying after creating a partition through the export process. tt To cancel
  • Panasonic AJ-PX380G | Operating Instructions - Page 179
    Chapter 9 Connecting to External Devices - Connection through the terminal tt The remaining free space of the corresponding partition can be checked in the main menu → [CLIP] → [PROPERTY] → [FREE CAP. OF PARTITION]. Selecting the target folder/partition in the explorer screen You can
  • Panasonic AJ-PX380G | Operating Instructions - Page 180
    Chapter 9 Connecting to External Devices - Connection through the terminal Clip thumbnail display of the storage device Displaying thumbnails You can display and manage clips saved in a storage device, as well as display the thumbnail screen for clips saved in a P2 card attached to the
  • Panasonic AJ-PX380G | Operating Instructions - Page 181
    Chapter 9 Connecting to External Devices - Connection through the terminal [FREE CAP.]: Remaining storage device capacity @@NOTE tt You can change the thumbnail screen display if necessary. tt The 1001st clips onwards are not displayed. Displaying clip information You can display metadata
  • Panasonic AJ-PX380G | Operating Instructions - Page 182
    operations of the following functions differ from the descriptions in the Operating Instructions supplied with AJ‑RC10G. rr button You can enable/disable the to the camera. [CAMERA MENU OPEN] is displayed on the LCD screen of AJ‑RC10G, and the button lights up at the same time.
  • Panasonic AJ-PX380G | Operating Instructions - Page 183
    from the terminal, refer to "Details of the connector signals" (page 222). tt For the software version of AJ‑RC10G, use Ver.1.20 or higher. For the updated versions of AJ‑RC10G software, refer to the support information for P2 in the following website. http://pro-av.panasonic.net/ - 183 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 184
    to the camera When AG‑EC4G is connected to the camera, the operations of the following functions differ from the descriptions in the Operating Instructions supplied with AG‑EC4G. rr button Selects if the character is superimposed to the video signal output from the terminal
  • Panasonic AJ-PX380G | Operating Instructions - Page 185
    > terminal of the camera, or for the serial connection with the terminal of the camera. For detailed setting procedure, refer to the Operating Instructions of AK‑HRP200G. rr When connecting to the terminal of the camera ffWhen you connect AK‑HRP200G via wired LAN and perform network
  • Panasonic AJ-PX380G | Operating Instructions - Page 186
    display selector button for the ND filter () Zoom and focus are not supported. rr Character/menu button () It operates in the same way as ‑HRP200G cannot be guaranteed. tt For details, refer to the Operating Instructions of AK‑HRP200G. tt When the camera is connected to AK‑HRP200G via
  • Panasonic AJ-PX380G | Operating Instructions - Page 187
    Chapter 9 Connecting to External Devices - Connecting to P2 ROP application Connecting to P2 ROP application Using a P2 ROP application that operates on an iPad connected to the camera via wireless LAN, you can remotely control some functions of the camera. For the setting for network connection,
  • Panasonic AJ-PX380G | Operating Instructions - Page 188
    by connecting the extension control unit AG‑EC4G, the remote control unit AJ‑RC10G, or the remote operation panel AK‑HRP200G to the
  • Panasonic AJ-PX380G | Operating Instructions - Page 189
    talking to the AG‑BS300P/ AG‑BS300E side becomes possible. @@NOTE tt The button and the button on the remote control unit (AJ‑RC10G) or the extension control unit (AG‑EC4G) connected to AG‑BS300P/AG‑BS300E can be set by the main menu → [USER SW]. tt Switching
  • Panasonic AJ-PX380G | Operating Instructions - Page 190
    Chapter 10 Network Connection This chapter describes how to use the camera by connecting to network.
  • Panasonic AJ-PX380G | Operating Instructions - Page 191
    wireless LAN, wired LAN, or 4G/LTE. For details on wireless modules that can be connected, visit the support desk at the following website: http://pro-av.panasonic.net/ To use wireless LAN, attach AJ‑WM30 (optional) to the terminal (sub-host). To use wired LAN, connect a LAN cable to the
  • Panasonic AJ-PX380G | Operating Instructions - Page 192
    AJ‑WM30, refer to "For wireless module other than AJ‑WM30" (page 193). Cautions when using wireless module AJ‑WM30 Read the operating manual The products can be used only in the country or region where they are supported. ffAJ‑WM30MC People's Republic of China ffAJ‑WM30P United States of America,
  • Panasonic AJ-PX380G | Operating Instructions - Page 193
    - Preparing for connection For wireless module other than AJ‑WM30 Connect the wireless module other than AJ‑WM30 (optional) to the camera. Turn off the tt For details on wireless modules that can be connected, refer to the support desk at the following website. http://pro-av.panasonic.net/en/sales_o/
  • Panasonic AJ-PX380G | Operating Instructions - Page 194
    For wired LAN Connect a LAN cable. Chapter 10 Network Connection - Preparing for connection LAN cable (optional) 1 Connect the LAN cable to the terminal on the rear side. - 194 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 195
    FTP client function cannot be used. @@NOTE tt The AJ‑WM30 can only operate when the communication method is 2.4 time due to the restart of the network service. tt All of the IP address, mode (when SSID is manually entered) Use the following procedures when manually connecting to a wireless access
  • Panasonic AJ-PX380G | Operating Instructions - Page 196
    necessary. 4 Enter information on the wireless access point to connect to. Select [MANUAL] in [SSID INPUT MODE]. Enter SSID of the wireless access point for setting screen termination may take time due to the restart of the network service. tt All of the IP address, subnet mask, and default gateway
  • Panasonic AJ-PX380G | Operating Instructions - Page 197
    [DIAL NO.]: Sets the phone number. For details, refer to the manual of the provider you have contracted. 3 Check the network connection. Check setting screen termination may take time due to the restart of the network service. Wired LAN settings The settings to connect to computers using the wired
  • Panasonic AJ-PX380G | Operating Instructions - Page 198
    display the screen, refer to [Start] → [Help and Support]. ffWhen [DHCP SERVER] is set to [ENABLE] on to [DISABLE] on the camera [Configure IPv4]: Select [Manually] and enter the following items. - [IP Address] take time due to the restart of the network service. tt All of the IP address, subnet mask
  • Panasonic AJ-PX380G | Operating Instructions - Page 199
    a user account, and characters between 6 and 15 for a password. For information on P2 Browser, refer to the User Guide of "P2 Web Application" on the following website: http://pro-av.panasonic.net/en/manual/index.html @@NOTE tt When [NETWORK SEL] is [OFF] or set to [4G/LTE], the P2 browse function
  • Panasonic AJ-PX380G | Operating Instructions - Page 200
    name, and characters between 6 and 15 for a password. For information on P2 Playlist Editor, refer to the User Guide of "P2 Web Application" on the following website: http://pro-av.panasonic.net/en/manual/index.html @@NOTE tt When [NETWORK SEL] is [OFF] or set to [4G/LTE], the P2 playlist editing
  • Panasonic AJ-PX380G | Operating Instructions - Page 201
    tt Use Ver3.00.00 or later versions of AK‑HRP200G. tt For details on the operations of ROP setup software, refer to the Operating Instructions of the AK‑HRP200G. tt Use Ver3.0.0.0 or later versions of ROP setup software. Connection settings for the streaming function You can perform live streaming
  • Panasonic AJ-PX380G | Operating Instructions - Page 202
    Chapter 10 Network Connection - Network function 2 Configure the network settings of the camera. 1) Select [INTERNAL] in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [SETTING DATA]. 2) Set each item in accordance with the connection destination in the main menu → [NETWORK SETUP] → [
  • Panasonic AJ-PX380G | Operating Instructions - Page 203
    connection destination and other settings in advance. 1 Set each item in the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE]. [SETTING DATA]: Sets from where the setting values of the client service are acquired from. ff[INTERNAL]: Uses the setting values set on the camera. ff[SD CARD]: Uses the
  • Panasonic AJ-PX380G | Operating Instructions - Page 204
    be accessed from the FTP explorer screen. However, if you have directly entered the folder name in the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [SERVER URL], you can access the folder even when it is the 101st or later. tt Connectivity and folder appearance may differ from those when
  • Panasonic AJ-PX380G | Operating Instructions - Page 205
    FTP server [USER ID]: ID of the user who has logged in [SSH]: [ENABLE]/[DISABLE] indication in the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [SSH] [PATH]: Path in the FTP server of the folder where currently displayed thumbnails are contained [DATE]: Date of last update [TIME]: Time of
  • Panasonic AJ-PX380G | Operating Instructions - Page 206
    ], the clip that exceeds approximately 4 GB per file cannot be transferred to the FTP server. tt To transfer clips using SSH, the FTP server must support SSH. tt Using SSH will reduce the transfer speed. tt To check the transfer result on a computer or another device, refreshing the display on the
  • Panasonic AJ-PX380G | Operating Instructions - Page 207
    is generated. tt To prevent unintended overwriting, create new folders to export data whenever possible. tt To transfer clips using SSH, the FTP server must support SSH. tt Using SSH will reduce the transfer speed. Writing back from an FTP server to an SD memory card (import) You can write back
  • Panasonic AJ-PX380G | Operating Instructions - Page 208
    " (page 203). 2 Set the camera's main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [REC DURING UPLOAD] to [ENABLE]. 3 Select the type of the clip to upload registered in the upload list. Transferring selected clips automatically (manual selection mode) Fig. 1 1 Establish the network connection
  • Panasonic AJ-PX380G | Operating Instructions - Page 209
    can be checked in the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [UPLOAD LIST]. The viewfinder or LCD monitor shows the operation status of transfer status of clips. @@NOTE tt The clips selected with the manual selection mode will be transferred prioritized to the clips registered to the
  • Panasonic AJ-PX380G | Operating Instructions - Page 210
    Chapter 10 Network Connection - Rec during upload function 2 Perform one of the following operations. ffTo delete an item, select [DELETE] with the control stick. ffTo cancel upload, select [CANCEL] with the control stick. ffTo re-transfer an item, select [RETRY] with the control stick. ffTo delete
  • Panasonic AJ-PX380G | Operating Instructions - Page 211
    Chapter 11 Maintenance Maintenance and error messages of the camera are described.
  • Panasonic AJ-PX380G | Operating Instructions - Page 212
    Chapter 11 Maintenance - Warning system Warning system If an error is detected immediately after the camera is turned on or during operation, the viewfinder, lamp, and tally lamp indicate the error. Deal with the error by following the indications. Cases indicated by error codes Error
  • Panasonic AJ-PX380G | Operating Instructions - Page 213
    [CANNOT DELETE!] [CANNOT FORMAT!] [CANNOT RE-CONNECT!] Description Manual authentication failed. Data cannot be accessed due to a content defect . The content versions do not match. Cannot delete. A P2 card problem or some other reason prevents formatting. Clips cannot be remerged because either
  • Panasonic AJ-PX380G | Operating Instructions - Page 214
    of the contents for the version that is not supported by the camera. Match the device and content Enter valid characters using a viewer. There is a problem with data in the file. Create the file SET!] [RETRY PASSWORD IS DIFFERENT!] Description Manual authentication failed. An attempt is made to
  • Panasonic AJ-PX380G | Operating Instructions - Page 215
    IP ADDRESS IS USED!] [INVALID VALUE!] [ENCRYPTION IS NOT SUPPORT!] Chapter 11 Maintenance - Warning system Description Measure Not enough space and the setting in the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [SERVER URL] are correct. Check that the LAN cable is connected correctly
  • Panasonic AJ-PX380G | Operating Instructions - Page 216
    in to PASS. Other benefits are offered to registered users. For details, refer to the website (http://panasonic.biz/sav/pass_e) of PASS (P2 Asset Support System). 2 Check the version using the camera and apply the update Check the version of the camera in the main menu → [DIAGNOSTIC] → [VERSION
  • Panasonic AJ-PX380G | Operating Instructions - Page 217
    Chapter 12 Specification This chapter describes the specifications of this product.
  • Panasonic AJ-PX380G | Operating Instructions - Page 218
    Specifications Chapter 12 Specification - Specifications Dimensions 144 mm (5-21/32 inches) 96 mm (3-25/32 inches) 199 mm (7-27/32 inches) 267 mm (10-1/2 inches) 348 mm (13 23/32 inches) Specifications General Power DC e 12 V (11.0 V - 17.0 V) Power consumption 19 W (body only, 1080/60i, AVC
  • Panasonic AJ-PX380G | Operating Instructions - Page 219
    Slow shutter speed Synchro scan shutter Shutter open angle Sensitivity Horizontal resolution Memory card recorder Recording media System format Recording format Recording video signal Recording and playback time Chapter 12 Specification - Specifications ff60i/60p mode: 1/15, 1/30 sec. ff30p mode:
  • Panasonic AJ-PX380G | Operating Instructions - Page 220
    Digital video Sampling frequency Quantizing Video compression format Digital audio Recording audio signal Headroom AVC proxy Video compression format Audio compression format Approximate recording time (1 GB) Video input/output terminal terminal terminal <
  • Panasonic AJ-PX380G | Operating Instructions - Page 221
    / (switch selection) XLR×1, 3-pin +48 V supported (menu selection) −40/−50/−60 dBu (menu selection) 25-pin, D-SUB, −40 dBu, 2ch supported Pin jack×2 (CH1, CH2) Output level: 600 Ω, 316 - 17.0 V), maximum output current 1.5 A 10-pin 12-pin 20-pin Options Wireless module AJ‑WM30 - 221 -
  • Panasonic AJ-PX380G | Operating Instructions - Page 222
    Chapter 12 Specification - Details of the connector signals Details of the connector signals DC IN 1 GND 2 NC 3 NC 4 +12 V Panasonic Parts No.: K1AA104H0038 Manufacturer Parts No.: HA16RX-4P (SW1) (76) (Hirose Electric Co.) @@NOTE tt Make sure that the polarity of the external power
  • Panasonic AJ-PX380G | Operating Instructions - Page 223
    Chapter 12 Specification - Details of the connector signals VF 1 UNREG-12V DC 12 V power supply 2 UNREG-12V DC 12 V power supply 3 A9.0V DC 9 V power supply (not used) 4 VF-PB-GND 5 VF-PR-GND 6 VF-Y Viewfinder PB signal GND Viewfinder PR signal GND Viewfinder Y signal output 7 VF
  • Panasonic AJ-PX380G | Operating Instructions - Page 224
    Chapter 12 Specification - Details of the connector signals Wireless microphone receiver interface 1 CH-1 SHIELD GND 2 CH-1 HOT Audio input from the wireless microphone receiver: CH1 HOT 3 CH-1 COLD Audio input from the wireless microphone receiver: CH1 COLD 4 GND GND 5 UNREG +12 V
  • Panasonic AJ-PX380G | Operating Instructions - Page 225
    Index Index A Focus assist color display  58 Adjusting image quality  69 Focus bar display  58 [AREA SETTING]  153 Formatting ATW  61 P2 card  120 [AUD01:LEVEL]  158 SD memory card  91, 121 [AUD02:INPUT]  159 Storage device  176 [AUD03:MONI]  160 Frame
  • Panasonic AJ-PX380G | Operating Instructions - Page 226
    Index Write protect  48 U Playback  110 USB  174 Pre-recording  73 Device mode  174 Properties  121 Host mode  174 Proxy recording  84 User bits  100 R USER button  66 User data  91 Rain cover  40 [USER MENU SEL]  152 RB gain control function  70 [
  • Panasonic AJ-PX380G | Operating Instructions - Page 227
    Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
Operating Instructions
Memory Card Camera-Recorder
Before operating this product, please read the instructions carefully and save this manual for future use.
ENGLISH
VQT5L72A-1(E)
W0915HM1115 -YI
Model No.
AJ-PX380G