Panasonic AJ-PX5000G Operating Instructions

Panasonic AJ-PX5000G Manual

Get Panasonic AJ-PX5000G PDF manuals and user guides View all Panasonic AJ-PX5000G manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AJ-PX5000G manual content summary:

  • Panasonic AJ-PX5000G | Operating Instructions - Page 1
    Repair Program. For details, see page 5. http://panasonic.biz/sav/pass_e/ Operating Instructions Memory Card Camera-Recorder Model No. AJ-PX5000G Before operating this product, please read the instructions carefully and save this manual for future use. M0913HM1103 -YI ENGLISH VQT5E21A-1(E)
  • Panasonic AJ-PX5000G | Operating Instructions - Page 2
    small children. CAUTION: Do not remove panel covers by unscrewing them. No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION: To reduce the risk of fire and annoying interference, use the recommended accessories only. CAUTION: To reduce the risk of fire, refer
  • Panasonic AJ-PX5000G | Operating Instructions - Page 3
    : AJ-PX5000G Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102 Support contact emission limit compliance, follow the attached installation instructions and the user must use only shielded interface cables when connecting to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 4
    of Cabinet of Ministers of Ukraine) The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS). The content of hazardous substance with the exemption of the applications
  • Panasonic AJ-PX5000G | Operating Instructions - Page 5
    be used, check the Operating Instructions accompanying the battery. Back-up Battery (Lithium Battery) • For the removal of the battery for disposal at the end of its service life, please consult your dealer. P2HD 5 Year Warranty Repair Program*1 Thank you for purchasing this Panasonic P2HD device
  • Panasonic AJ-PX5000G | Operating Instructions - Page 6
    names, product names, etc., contained in this instruction manual are trademarks or registered trademarks of their respective owners. ffThis product is licensed under the AVC Patent Portfolio License. All other acts are not licensed except private use for personal and non-profit purposes such as
  • Panasonic AJ-PX5000G | Operating Instructions - Page 7
    cards  85 Preventing accidental erasure  32 Performing operations on SD memory cards  86 P2 card access LEDs and status of P2 cards  32 How to use user data  88 P2 card recording time  33 How to use scene file data  88 CPS (Content Protection System)  33 How to restore menu
  • Panasonic AJ-PX5000G | Operating Instructions - Page 8
    133 Setting menu display  134 Setting menu basic operations  134 Setting [USER MENU]  135 Menu list  136 [PAINT]  136 [VF]  186 Connecting to the remote control unit (AJ‑RC10G)  187 Connecting to the extension control mode  197 Updating the camera firmware  199 Chapter
  • Panasonic AJ-PX5000G | Operating Instructions - Page 9
    Chapter 1 Overview Before using the camera, read this chapter, and check the accessories.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 10
    using the camera Before using laser devices are used. rr Note or the P2 cards used, we will or deleting data using the functions use a data deletion program for computers (commercially available) to completely erase the data. Users for use in the . http://pro-av.panasonic.net/ We do -av.panasonic.net/
  • Panasonic AJ-PX5000G | Operating Instructions - Page 11
    region is reflected in the initialization values and the setting values currently in use. 4 Select [YES] in the confirmation message, and press the jog SELECT] is changed, [AREA SET] flashes. tt When making this setting to use the camera for the first time, only the following items are changed on the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 12
    ) Chapter 1 Overview - Accessories Mount cap (already attached to the product) (page 15) CD-ROM ffOperating Instructions ffUtility software For installation procedures, refer to the installation manual on the CD-ROM. @@NOTE tt After unpacking the product, dispose of the packing material properly
  • Panasonic AJ-PX5000G | Operating Instructions - Page 13
    P2 cards and SD memory cards that are not described in the Operating Instructions, visit the support desk at the following website: http://pro-av.panasonic remote control unit (AJ‑RC10G)" (page 187) "Connecting to the extension control unit (AG‑EC4G)" (page 188) - - - "Using external DC power supply
  • Panasonic AJ-PX5000G | Operating Instructions - Page 14
    Chapter 2 Description of Parts This chapter describes the names, functions, and operations of parts on the camera. Details displayed on the display window are also described.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 15
    1 switch (page 35) Switch used to turn on/off the power. @@NOTE 3 terminal Mount the viewfinder AJ‑HVF21KG (optional), etc. 4 Mount cable clamp (page 97) Used for securing the lens and microphone output terminal. When the video light control unit AJ‑RC10G (optional
  • Panasonic AJ-PX5000G | Operating Instructions - Page 16
    . 21 Microphone holder mounting screws Screws for mounting the microphone holder AJ‑MH800G (optional) or VF interface box AG‑YA500G (optional). 22 terminal (page 97) Connect the lens connection cable. For details of the lens used, refer to the Operating Instructions for the lens. - 16 -
  • Panasonic AJ-PX5000G | Operating Instructions - Page 17
    channels 1/3, 2/4) terminals. @@NOTE tt When the stereo microphone AJ‑MC900G (optional) is used, set both and (or and 1/2 (3/4). Adjusts automatically. Adjusts manually. ffSet which of audio channels 1/2 or 3/4 is problem when a microphone is connected. - 17 -
  • Panasonic AJ-PX5000G | Operating Instructions - Page 18
    the audio equipment or the microphone. 9 (microphone input) terminal (page 102) ffConnect the microphone (optional). ffThe phantom microphone can also be used. To use this, set [ON] in the main menu → [I/F SETUP] → [MIC/AUDIO] → [FRONT MIC POWER]. When it is set to [ON] and a microphone is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 19
    Chapter 2 Description of Parts - Audio (output) function section Audio (output) function section 12 3 5 4 6 6 7 1 (volume adjustment) dial Adjust the volume of the speaker and earphones. 2 (alarm volume adjustment) dial Adjust the volume of the alarm from the speaker and
  • Panasonic AJ-PX5000G | Operating Instructions - Page 20
    Setting Description Does not use the ND filter. Reduces the amount of light entering the MOS sensor to distance measurements from the subject. 4 buttons (//) (page 56) Assign user-selected functions to each button. Pressing
  • Panasonic AJ-PX5000G | Operating Instructions - Page 21
    side, the six screens that indicate the setting status of the camera ([STATUS] screen, [!LED] screen, [FUNCTION] screen, [AUDIO] screen, [CAC] screen, [USER SW] screen) are switched in order in the viewfinder. This does not affect the output signals from the camera. The display goes out in
  • Panasonic AJ-PX5000G | Operating Instructions - Page 22
    to be assigned in the main menu → [CAMERA] → [USER SW] → [TEXT MEMO (U4)]. 14 P2 memory card access LED (page 32) Indicate the access status of use. - Refer to our support desk at the following website for the latest information not included in these operating instructions. http://pro-av.panasonic.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 23
    selected in [OUTPUT SEL] → [SDI2/HDMI OUT]. Up-conversion is not supported. Superimposing of characters can be set by the switch applied referenced to this input signal. (page 61) @@NOTE tt During HD SDI signal output, use a 5C‑FB or higher cable. 33 (monitor output)
  • Panasonic AJ-PX5000G | Operating Instructions - Page 24
    . Clips on the P2 card can also be displayed as thumbnails. During thumbnail display, clips can be operated or deleted, and P2 cards can be formatted . 7 Cursor/ button (page 110) This is used for setting time codes or user bit values, and selecting thumbnails or operating menus. When the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 25
    , set the time code to the current time or externally lock the time code. Used to set the time code or user bits. Used to advance the time code only during recording. Records continuously time codes on P2 cards that have been spliced together. 5 terminal (page 65) Input reference signals
  • Panasonic AJ-PX5000G | Operating Instructions - Page 26
    Chapter 2 Description of Parts - Warning and status display section Warning and status display section 12 56 3 4 7 1 Display window Displays memory-related warnings, battery charge level, audio level, and time data. @@NOTE tt If the camera is left with the battery attached, the various data
  • Panasonic AJ-PX5000G | Operating Instructions - Page 27
    card, battery charge level, audio level display 1 Media remaining space indicator bar Indicates the remaining free space in the P2 card using a 7-segment display. The P2 card remaining time indicated by a single segment is set in three or five minutes in the main menu → [I/F SETUP] → [BATTERY/P2CARD
  • Panasonic AJ-PX5000G | Operating Instructions - Page 28
    -time hours/minutes value of the time zone is displayed. Indicates the time code, user bits, CTL, and real time. @@NOTE tt When is selected by → [TIME] → no display (time zone) → [TCG] ([TC]). 7 Mode display [W] [HD] [DV] [P‑REC] Lights during operation in the SD mode (480/59.94i, 576/50i)
  • Panasonic AJ-PX5000G | Operating Instructions - Page 29
    Chapter 3 Recording and Playback This chapter describes the basic procedure for recording and playback. It also describes special shooting methods such as pre-recording and loop recording.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 30
    :00 New Zealand +12:45 Chatham Islands +13:00 @@NOTE tt Be sure to make this setting before using the camera for the first time. After, do not change the setting during use. tt Thumbnail operations and menu operations on thumbnail operation section are not possible while the switch is set
  • Panasonic AJ-PX5000G | Operating Instructions - Page 31
    (AJ‑P2AD1G) attached cannot be inserted into the P2 memory card slot on the camera. tt If SDHC/SDXC memory cards other than microP2 memory cards are used on the microP2 memory card slot, operation is not guaranteed. tt If a microP2 memory card is inserted slowly, [FORMAT ERROR!] or [NOT SUPPORTED
  • Panasonic AJ-PX5000G | Operating Instructions - Page 32
    not possible by the currently set recording format since the SD memory card, etc. is inserted. To record the card, change the recording format or use a P2 card. The card is inserted in a slot that is different from the slot selected in the main menu → [REC/PB] → [REC/PB SETUP] → [REC MEDIA
  • Panasonic AJ-PX5000G | Operating Instructions - Page 33
    required to be updated depending on the type of P2 card. (page 199) tt Refer to our support desk at the following website for the latest information not included in these operating instructions. http://pro-av.panasonic.net/ rr P2 card recording times (Example when a 64 GB card is used) 1080P 1080i
  • Panasonic AJ-PX5000G | Operating Instructions - Page 34
    operating environment, visit the support desk at the following website: http://pro-av.panasonic.net/ tt When using regular IT tools such as Microsoft Windows Explorer or Apple Finder to transfer data to a computer, follow the instructions below. However, be sure to use P2 Viewer Plus when returning
  • Panasonic AJ-PX5000G | Operating Instructions - Page 35
    camera is turned on. tt Select which of P2 or microP2 memory card slot is to be used as the recording card slot beforehand. If the After turning on the power and inserting the P2 card, set the switches as follows before starting operations. abc de a: button Set to the card slot for
  • Panasonic AJ-PX5000G | Operating Instructions - Page 36
    SEL] indicator flashes in the viewfinder until switching of the P2 card to be recorded to is completed. If the card could [REC MEDIA] can also be assigned to the button. For shooting White/black balance adjustment to completion of recording For shooting, use the following steps. a bc d e a: <
  • Panasonic AJ-PX5000G | Operating Instructions - Page 37
    . - When short-burst recording is stopped - When stopping recording immediately after recording to the second P2 card tt Just after inserting a P2 card or turning on the power, recording is started using the internal memory of the camera. In this case, recording cannot be stopped until the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 38
    details, refer to "Assigning functions to buttons" (page 56). tt Video and &FREQ] Loop recording ffThis function successively records to two P2 cards inserted in the card slots. ffWhen there is modes in which the loop recording function can be used, refer to the table in "System modes and
  • Panasonic AJ-PX5000G | Operating Instructions - Page 39
    @@NOTE tt When this function is used, each P2 card must have at least one P2 card, make sure that there is at least one minute of free space on the card to be recorded to. @@NOTE tt Hot swap playback is not supported is set to in the main menu → [CAMERA]→ [USER SW] → [SHOT MARK (U3)]. ffIf it is set
  • Panasonic AJ-PX5000G | Operating Instructions - Page 40
    required portions can be selected and copied. (page 113) Adding text memos 1 Make sure that [TEXT MEMO] is set to in the main menu → [CAMERA] → [USER SW] → [TEXT MEMO (U4)]. ffIf it is set, the text memo function is assigned to the button. ffThe text memo function can be
  • Panasonic AJ-PX5000G | Operating Instructions - Page 41
    supported. In addition to the traditional MPEG4 format, the MOV format more suitable for nonlinear editing is available. Video files, audio files, and real-time metadata file (time code, user bits) can be recorded to the P2 values of [REC MEDIA], [REC MODE (HD)], and [TC SUPER] with the mode check
  • Panasonic AJ-PX5000G | Operating Instructions - Page 42
    kHz Recording the proxy data Select [P2] or [P2&SD] in the main menu → Instructions, refer to the support desk at the following website. http://pro-av.panasonic.net/ When recording the proxy data to an SD memory card, always format the card using card containing data for updating. @@NOTE tt While
  • Panasonic AJ-PX5000G | Operating Instructions - Page 43
    .BIN The time code, user bits, and information are recorded to the frame unit. Use P2 Viewer Plus to check the proxy data. Some versions of P2 Viewer Plus may not be able to check the data. For information on P2 Viewer Plus, visit the following website: http://pro-av.panasonic.net/ @@NOTE tt Clips
  • Panasonic AJ-PX5000G | Operating Instructions - Page 44
    updating the firmware P2 card will be performed. ffNo SD memory card is inserted. [SD --min] ffThe SD memory card is write-protected. [SD WP] Check the status of the SD memory card. Copying proxy data to the SD memory card 1 Press the button to display the thumbnail screen. 2 Use
  • Panasonic AJ-PX5000G | Operating Instructions - Page 45
    to the thumbnail screen immediately after removing or inserting the P2 card or the power is turned on, it may take time to read the clip information. During this time, [UPDATING..] is displayed on the thumbnail screen. tt If a P2 card is inserted while another card is being played back, the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 46
    flash band compensation (FBC) function and other shooting functions. It also describes how to set convenient functions for shooting such as assignment of functions to buttons (//) and setting of time data.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 47
    . ff"l" are supported, and "-" are not supported. [LINE&FREQ] [1080‑59.94i] [1080‑50i] [1080‑59.94P] [1080‑50P] [480‑59.94i] [576‑50i] System mode [REC FORMAT] [AVC‑I100] [AVC‑I50] [AVC‑G50] [AVC‑G25] [DVCPRO HD] [AVC‑I100] [AVC‑I50] [AVC‑G50] [AVC‑G25] [DVCPRO HD] [AVC‑I100] [AVC‑I100] [DVCPRO50
  • Panasonic AJ-PX5000G | Operating Instructions - Page 48
    → 60 System mode [LINE&FREQ] [REC FORMAT] [1080‑59.94i] [AVC‑I100] [AVC‑I50] [AVC‑G50] [AVC‑G25] [DVCPRO HD] [1080‑50i] [AVC‑I100] [AVC‑I50] [AVC‑G50] [AVC‑G25] [DVCPRO HD] [1080‑59.94P] [AVC‑I100] [1080‑50P] [AVC‑I100] [480‑59.94i] [576‑50i] [DVCPRO50] [DVCPRO] [DV] [DVCPRO50
  • Panasonic AJ-PX5000G | Operating Instructions - Page 49
    to the central position with the white balance automatically adjusted. rr White pattern ffA white object (cloth or wall) near the subject may also be used for the white pattern. ffRequired size of white pattern is as follows. 1/4 or more of the screen width 1/4 or more of the screen height ffDo
  • Panasonic AJ-PX5000G | Operating Instructions - Page 50
    switch. Select [ATW] in the main menu → [CAMERA] → [WHITE BALANCE MODE] → [AWB B]. The auto tracking white balance function can be assigned to the buttons (//). For details, refer to "Assigning functions to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 51
    3200K] or [5600K]. @@NOTE tt Even if color temperature is set manually, the newly adjusted color temperature is recorded to the position of the using the buttons (//) ffWhen [DS.GAIN] is assigned to [USER MAIN], [USER1], and [USER2] in the main menu → [CAMERA] → [USER
  • Panasonic AJ-PX5000G | Operating Instructions - Page 52
    balance tt During the automatic black balance execution, recording to the P2 card is not performed by pressing the button. tt is displayed in the viewfinder. Note, however, that when the remote control unit AJ‑RC10G (optional) or the extension control unit AG‑EC4G (optional) is connected,
  • Panasonic AJ-PX5000G | Operating Instructions - Page 53
    ffTo shoot so that stripe patterns are eliminated in the horizontal direction when shooting on the monitor screen ffTo shoot moving subjects with special effects Using the half shutter speed ffTo shoot films with special effects [LINE&FREQ] [1080‑59.94P] [1080‑59.94i] [480‑59.94i] [1080‑50P] [1080
  • Panasonic AJ-PX5000G | Operating Instructions - Page 54
    Chapter 4 Adjustments and Settings for Recording - Setting the electronic shutter tt A subject that quickly crosses the camera may appear distorted when shot. This is due to the method applied for reading the signals from the pickup device (MOS sensor), and is not a malfunction. tt Shutter mode is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 55
    compensation function operation conditions ffThe flash band compensation function can be used under the conditions that the camera is in 59.94i, 59 function cannot be used. To use the function again, return to a mode where the function can be used, and press the buttons (//<
  • Panasonic AJ-PX5000G | Operating Instructions - Page 56
    . This is effective for intentionally varying the color temperature after white balance has been performed. To change the color temperature, press the button assigned with this function, and then press the jog dial button. The color temperature indicator in the viewfinder screen flashes in
  • Panasonic AJ-PX5000G | Operating Instructions - Page 57
    → [VF DISPLAY] → [VF COLOR]. Assigns the function for selecting whether to use the P2 memory card slot or the microP2 memory card slot as the recording slot. This is connected, and [I.OVR] or [C.TEMP] is assigned to the buttons on the AJ‑RC10G and AG‑EC4G side, operation of the jog dial button
  • Panasonic AJ-PX5000G | Operating Instructions - Page 58
    supports independent 4-channel sound recording in all recording formats (HD (1/2 according to [MIC/AUDIO] → [VR SELECT]) automatically or manually in [MIC/AUDIO] → [AUTO LVL CH3(CH1)] and [AUTO level adjustment dial. ffWith HD cards, too, four audio channels are recorded to P2 cards. ffWhen SDI input
  • Panasonic AJ-PX5000G | Operating Instructions - Page 59
    of channels 1/2, select (automatic adjustment) or (manual adjustment by adjustment dial) by the /
  • Panasonic AJ-PX5000G | Operating Instructions - Page 60
    levels rr When [CH3/4] is selected by [VR SELECT] Channel 1, channel 2 [AUTO LVL CH1] [AUTO LVL CH2] Adjustment method [OFF] Manual adjustment by [LVL CONTROL CH1], [LVL CONTROL CH2] [ON] Automatic adjustment Channel 3, channel 4 switch switch
  • Panasonic AJ-PX5000G | Operating Instructions - Page 61
    to the reference signal supplied from the terminal The HD-Y signal or a composite signal matching the system frame frequency is supplied from the VBS input signal. Down converter output matches the VBS input signal. HD SDI output has an advance of approx. 90 H from the VBS input signal.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 62
    of clips recorded to P2 cards and recorded as a continuous value. rr User bits Two types of user bits are built in year/month/day data of the user bits. It is also used as the reference for file [DV] mode) TC OUT Output TC LTC, VITC of HD SDI LTC is output. LTC is output. LTC is output
  • Panasonic AJ-PX5000G | Operating Instructions - Page 63
    UB LTC UB for HD SDI None None VITC UB for HD SDI None None * With [EXT], UB of the terminal is slaved. User bits settings Set LTC Use at this setting when the editing device such as a computer uses the frame rate information of the user bits. Reads the user bit last recorded to P2
  • Panasonic AJ-PX5000G | Operating Instructions - Page 64
    switch to display [VTCG] on the display window. Retention of user bits in memory User bit settings are automatically recorded and are retained even if the power is clip on the P2 card that was changed to. tt During recording or free run, this function cannot be used. Time code function
  • Panasonic AJ-PX5000G | Operating Instructions - Page 65
    rr When the camera and external device are locked to the external time code generator, and the TC OUT output signal of the camera is used for simultaneous recording Reference video signal or terminal TC OUT terminal TC IN terminal terminal terminal TCG
  • Panasonic AJ-PX5000G | Operating Instructions - Page 66
    Chapter 4 Adjustments and Settings for Recording - Setting the time data rr When the camera and external devices are locked to the external time code generator and two or more cameras are connected in a cascade configuration Reference video signal TC OUT terminal TCG External time code generator
  • Panasonic AJ-PX5000G | Operating Instructions - Page 67
    to the terminal signal. The time code of the HD SDI signal input from the terminal is not locked. slaved to the terminal. Setting of user bits when the time code is externally locked When and time codes is not guaranteed. tt To use the terminal or monitor output
  • Panasonic AJ-PX5000G | Operating Instructions - Page 68
    2) 4 Press the jog dial button (or button) to apply the character. 5 Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial → [DF MODE]. The playback order of clips recorded to P2 cards is not linear such as with VTR. Each time that thumbnail operation is performed or
  • Panasonic AJ-PX5000G | Operating Instructions - Page 69
    removed The reference value (value of start frame of initial clip) is changed in the following cases: ffWhen the power is turned on or all P2 cards are removed, the top frame becomes 0. ffWhen the playback CTL counter value is reset, the current playback position is taken as 0, and the location
  • Panasonic AJ-PX5000G | Operating Instructions - Page 70
    The example is for the AJ‑HVF21KG. (For information on the viewfinder, refer to the Operating Instructions for the optional viewfinder.) 1 . When [SAVE LED] is set to [P2CARD] ffFlashes when there is little capacity on the P2 card when [P2CARD] is set to in the main menu → [VF] → [VF INDICATOR]
  • Panasonic AJ-PX5000G | Operating Instructions - Page 71
    59.94P 1080/59.94i or 480/59.94i 1080/50P 1080/50i or 576/50i 3 Proxy information display Displays the proxy recording information. [PROXY P2 (P2&SD)] Displayed when proxy recording is started. [PROXY ERR] Displayed when there is an error in proxy recording. 4 SD memory card status display [WP
  • Panasonic AJ-PX5000G | Operating Instructions - Page 72
    to /. Displayed when gain is switched by the switch or button. When digital super gain is active, that value is displayed at the same [RET] Indicates the button. [INHIBIT] Displayed when the button is not operated. [S.GAIN **dB/OFF] Displays the selected super
  • Panasonic AJ-PX5000G | Operating Instructions - Page 73
    Displayed when the button is functioning as the switch. Displayed when the [Y GET] function is [ON]. Displayed when the button is functioning as viewfinder. Displayed when the slot of the media used for recording is switched to [P2] (P2 memory card slots 1/2) or [mP2] (microP2
  • Panasonic AJ-PX5000G | Operating Instructions - Page 74
    when playback operation is not accepted during updating of the clip information for playback. Displayed recorded clip to the P2 card. Flashes when the button assigned with [SLOT SEL] a lens with an aperture value display function is used. Also, flashes when the iris override is variable.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 75
    ]. [HD]/[SD]/[FLK1]/[FLK2]/[FLK3]/[FREC]/[VREC] 27 Lock status display of auto tracking white balance Displayed when the button space remaining on the P2 card. 35 Recording media display From among P2 and microP2 memory card slots, displays the slots that can be used for recording/playback,
  • Panasonic AJ-PX5000G | Operating Instructions - Page 76
    format Displays the recording method. [AVC‑I100], [AVC‑I50], [AVC‑G50], [AVC‑G25], [DVCPRO HD], [DVCPRO50], [DVCPRO], [DV] Camera warning, notification display area [VF DISPLAY] → [DISP MODE] l*4 6 button assignment information [VF DISPLAY] → [DISP MODE] l 7 Focus bar display
  • Panasonic AJ-PX5000G | Operating Instructions - Page 77
    [VF INDICATOR] → [BATTERY] l 34 P2 card remaining free space [VF INDICATOR] → display → [CAC] screen display → [USER SW STATUS] screen display → no display of the signal output from the terminal by [HD‑SDI]/ [SD‑SDI]. Displays the superimposition status of characters selected
  • Panasonic AJ-PX5000G | Operating Instructions - Page 78
    in the card slot, remaining capacity and total used capacity. The statuses of cards to be displayed are as follows: [ACTIVE]/[ACCESSING]/[INFO READING]/[FULL]/[PROTECTED]/[NOT SUPPORTED]/ [FORMAT ERROR]/[AUTH NG]/[REC IMPOSSIBLE]/[NO CARD] For details, refer to "P2 card access LEDs and status of
  • Panasonic AJ-PX5000G | Operating Instructions - Page 79
    When the shutter speed/mode setting is changed When white balance is adjusted When black balance is adjusted When the extender is selected When the button is selected When the marker select function is selected When in the iris override mode When the CAC lens is mounted or unmounted [FILTER
  • Panasonic AJ-PX5000G | Operating Instructions - Page 80
    on the lens is held down. To activate this function, select [CAM RET] in the main menu → [CAMERA] → [SW MODE] → [RET SW]. @@NOTE tt The HD-Y or VBS signals of the terminal cannot be viewed as return video signals. Zebra patterns display The camera can display two types of
  • Panasonic AJ-PX5000G | Operating Instructions - Page 81
    is in-focus. Waveform monitor function A waveform of the video can be displayed by assigning the waveform monitor function to the buttons (//) and pressing the assigned buttons. Press the button again to return to the normal display. ffThe waveform and vector
  • Panasonic AJ-PX5000G | Operating Instructions - Page 82
    and Settings for Recording - Adjusting and setting the LCD monitor Adjusting and setting the LCD monitor Locking the video signal to the external reference signal Using the LCD monitor 1 Push the button towards the right to open the LCD monitor. 2 Set the LCD monitor screen to the easiest-to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 83
    SDI input signals are signals of the recording format currently set to the camera. *1 HD signals *2 When [480‑59.94i] or [576‑50i] is selected in the in viewfinder For details on method of use, refer to the Operating Instructions for the respective viewfinder. For AJ‑HVF21KG 13 14 11 7 9 10 12
  • Panasonic AJ-PX5000G | Operating Instructions - Page 84
    D> to . For details on the eyepiece for presbyopia, consult your dealer. 11 Connector plug 12 Lock ring 13 Microphone holder 14 Viewfinder stopper Used for attaching and detaching the viewfinder. rr Mounting a large lens If there is no room between the top surface of the lens and the bottom
  • Panasonic AJ-PX5000G | Operating Instructions - Page 85
    NOTE tt For details on items for setup data, user data, and scene file, etc., refer to "Setting items to [USER MENU] and loading/reading the settings to a data file" (page 170). Setting up using SD memory cards An SD memory card (optional) can be used as a setup card that stores setting menu content
  • Panasonic AJ-PX5000G | Operating Instructions - Page 86
    the orientation of the card before re-inserting it. tt On the camera, use SD memory cards that are compliant with the SD, SDHC or SDXC standards. memory card and close the slot cover. Note the following points when using or storing memory cards. ffAvoid high temperature and humidity. ffAvoid water
  • Panasonic AJ-PX5000G | Operating Instructions - Page 87
    are displayed. 3 Enter the desired characters with the keyboard. (Fig. 1) 4 Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press button (or button). The file is saved and the file list is updated. (Fig. 2) For details on error messages if an error message is displayed,
  • Panasonic AJ-PX5000G | Operating Instructions - Page 88
    the thumbnail operation, menu operation, and USB storage mode" (page 197). How to use user data The content of setting data can be written to and read written data from user area on the camera's internal memory. Use of this data allows you to quickly reproduce optimum setup states. Writing setting
  • Panasonic AJ-PX5000G | Operating Instructions - Page 89
    SET> button). The file is saved and the file list is updated. Reading setting data for scene files 1 Select [LOAD] in the files and lens files and data saved as user data is not deleted by performing this operation lens is replaced. 1 Mount the lens to be used as a reference on the camera. 2 Shoot a
  • Panasonic AJ-PX5000G | Operating Instructions - Page 90
    in the waveform monitor. 7 Replace the lens with the one to be used for creating the lens file. 8 Fine-adjust the lens aperture so that jog dial button (or button). The file is saved and the file list is updated. Reading lens files from internal memory 1 Select [LOAD] in the main menu → [FILE]
  • Panasonic AJ-PX5000G | Operating Instructions - Page 91
    and keyboard are displayed. 3 Enter the desired characters with the keyboard. 4 Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press (or button). The file is saved and the file list is updated. For details on error messages if an error message is displayed, refer to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 92
    Chapter 4 Adjustments and Settings for Recording - Handling setting data 4 When the completion message is displayed, press the jog dial button (or button). For details on error messages if an error message is displayed, refer to "Warning/error displays in the thumbnail operation, menu
  • Panasonic AJ-PX5000G | Operating Instructions - Page 93
    Chapter 5 Preparation Before you use the camera, mount the battery and lens following the procedures in this chapter. The mounting of accessories is also described in this chapter.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 94
    batteries can be supported by changing [BATTERY SELECT] in the main menu → [I/F SETUP] → [BATTERY/P2CARD]. Use of batteries that charging, refer to each instruction operation.) tt When using the light (Ultralight 2), using a battery of 90 Wh or more is recommended. tt When using a studio system (AG
  • Panasonic AJ-PX5000G | Operating Instructions - Page 95
    to [BATTERY/P2CARD] (page 163) and [BATTERY SETTING] (page 163). Using external DC power supply terminal DC cable External DC power supply turned on (such as lenses, wireless microphone receivers). For the DC cable, use a dual-core shielded wire of AWG18 (nominal cross section area 0.824
  • Panasonic AJ-PX5000G | Operating Instructions - Page 96
    supply DC IN 1 GND 2 NC 3 NC 4 +12 V Panasonic Part No.: K1AA104H0038 Manufacturer Parts No.: HA16RX-4P (SW1) ( terminal, the light circuit does not function. The light circuit can be used only when power is supplied from the Anton/Bauer battery plate. tt When connecting the battery
  • Panasonic AJ-PX5000G | Operating Instructions - Page 97
    lens flange back adjustments. For details, refer to "Flange back adjustment" (page 97). @@NOTE tt For handling the lens, refer to the lens operating instructions. tt For details on the current from the terminal, refer to "Details of the connector signals" (page 204). tt When the lens is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 98
    the lens cable. 2 Set the lens iris to manual, and fully open the iris. 3 Place the flange If the image level is too high, use the filters or the shutter. 4 Loosen the with an extender function, release the extender function. 4) Make sure that [HD] is set in the main menu → [PAINT] → [GAMMA] →
  • Panasonic AJ-PX5000G | Operating Instructions - Page 99
    unevenness of color for the whole screen. 2) Set the lens aperture to manual, and adjust it so that the zebra pattern covers the whole viewfinder screen Compensation values are stored on the camera as a single lens file data using two patterns for when the lens is equipped and not equipped with an
  • Panasonic AJ-PX5000G | Operating Instructions - Page 100
    details on additions and modifications to lenses compatible with the chromatic aberration compensation function, visit the support desk at the following website: http://pro-av.panasonic.net/ Operation of chromatic aberration compensation function Operate by the following procedure when lens data is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 101
    to the camera. The response data from the lens is not supported, or the response contains information other than that defined in the chromatic chromatic aberration compensation will not function, but will not cause any problems in use. Position detection (focus zoom) of the lens is encoder type,
  • Panasonic AJ-PX5000G | Operating Instructions - Page 102
    audio input devices. Using the front microphone Microphones such as the stereo microphone kit AJ‑MC900G (optional) can the audio channel to be recorded, switch the switch to . Using a wireless microphone receiver Fig. 1 1 Remove the cover to insert the wireless microphone
  • Panasonic AJ-PX5000G | Operating Instructions - Page 103
    Using audio devices Chapter 5 Preparation - Preparing for audio input d a bc a: switch b: terminal c: terminal d: / selector switch 1 Connect
  • Panasonic AJ-PX5000G | Operating Instructions - Page 104
    Mounting accessories Chapter 5 Preparation - Mounting accessories Mounting the camera on a tripod When mounting the camera on a tripod, use the optional tripod adaptor (SHAN-TM700). Tripod adaptor Pan head Fig. 1 Fig. 2 1 Mount the tripod adaptor on the tripod. (Fig. 1) 2 Mount the camera on
  • Panasonic AJ-PX5000G | Operating Instructions - Page 105
    Chapter 5 Preparation - Mounting accessories Attaching the rain cover The figure below shows an example of use of the rain cover SHAN-RC700. Tighten the cord Secure with the surface fastener - 105 -
  • Panasonic AJ-PX5000G | Operating Instructions - Page 106
    start/stop can be controlled by connecting an external switch to this terminal. An LED connected to this terminal can also be used as a tally lamp. This is useful for shooting video when fixing the camera on a crane. terminal (Connection example) 41 32 Cable connector HR10A-7R-4SC (73
  • Panasonic AJ-PX5000G | Operating Instructions - Page 107
    Chapter 6 Thumbnail Operations for Clips The images and voices created from one shooting session, together with additional information such as text memos and metadata are saved as clips. You can play back and edit clips with the camera.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 108
    process status is displayed. [UPDATING] and the icon [ ] P2 card is not supported. ff[AUTH NG CARD] Indicates that the card is a microP2 memory card which cannot authenticate a CPS password. Displayed in gray when a storage device is not connected. Displayed in white when a storage device can be used
  • Panasonic AJ-PX5000G | Operating Instructions - Page 109
    clip. This thumbnail can be changed using the [EXCH. THUMBNAIL] function. code [TC] at the start of clip recording/user bits [UB] at the start of clip recording/shooting HD format. 17 [ ] Incomplete clip indicator This is displayed when clips are saved across multiple P2 cards and either of the P2
  • Panasonic AJ-PX5000G | Operating Instructions - Page 110
    button e: button Selecting clips You can select multiple clips randomly. 1 Use the cursor buttons to move the cursor over the desired clip. 2 Press screen for playback. @@NOTE tt While holding down the button, use the cursor buttons (`/{) to move the cursor to the first or last clip
  • Panasonic AJ-PX5000G | Operating Instructions - Page 111
    . 1 Select [THUMBNAIL SIZE] in the main menu → [CLIP] → [THUMBNAIL SETUP]. 2 Move the cursor to the type of the clip you want to display using the cursor buttons. 3 Press the button. Setting the clip information display You can customize the clip information display contents according to your
  • Panasonic AJ-PX5000G | Operating Instructions - Page 112
    change your item selection by unchecking selected items. Playing back clips 1 Press the button. The thumbnail screen appears on the viewfinder screen. 2 Use the cursor buttons to move the cursor over the clip to be played back. 3 Press the button. ffPlayback starts from the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 113
    1 Use the P2 cards inserted into card slots. tt [SHOT MARK] is assigned to the button in the factory setting. It can also be assigned to the button in the main menu → [CAMERA] → [SW MODE]. Text memo You can add text memos during recording or playback. Text memos can be used
  • Panasonic AJ-PX5000G | Operating Instructions - Page 114
    memo where the playback started. ffWhile holding down the button, use the cursor buttons (`/{) to move the cursor to the beginning or end screen is displayed does not start recording. tt For clips in AVC‑Intra and AVC‑LongG formats with different settings (different system frequency) in the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 115
    . Restoring clips You can restore clips that were made defective as a result of sudden power-down during recording or removal of the P2 card being accessed. 1 Use the cursor buttons to move the cursor over the clip to be restored (defective clips are indicated by defective clip marks) and press
  • Panasonic AJ-PX5000G | Operating Instructions - Page 116
    are set automatically during shooting. Using the latest update version of P2 Viewer Plus, metadata upload files can be written to SD memory cards using a computer. Download and install the latest version of P2 Viewer Plus from the following website. http://pro-av.panasonic.net/ For details on SD
  • Panasonic AJ-PX5000G | Operating Instructions - Page 117
    added. *1 You can select the [USER CLIP NAME] recording method. For details, refer to "Selecting the [USER CLIP NAME] recording method" (page uploaded metadata can be checked. 3 While checking the settings for the metadata, use the cursor buttons to move the cursor over the item where you want to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 118
    metadata has been loaded, or when setting disables recording of loaded clip metadata [USER CLIP NAME] to be recorded Uploaded data + [COUNT] value* Same as not wish to format the card. 2 Use the cursor buttons and the button to select [YES]. The selected P2 card is formatted. @@NOTE tt Data
  • Panasonic AJ-PX5000G | Operating Instructions - Page 119
    the number of added text memos. The [ ] mark will be displayed if the P2 card in which the clip is recorded is write-protected. 2 Clip number @@NOTE tt Displays the time code value at the start of the recording. Displays the user bit value at the start of the recording. Displays the date of the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 120
    . tt Any [MEMO] with 101 characters or more cannot be modified. P2 card status display rr P2 card status display settings You can select the P2 card status display from either remaining capacity or used capacity of the P2 card. 1 Press the button. The thumbnail screen appears on the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 121
    card which cannot authenticate a CPS password. Use the cursor buttons to place the cursor on the P2 card for data to be accessed and press the button to display detailed information on the P2 card. Specific information such as the serial number and the user ID can be checked. (Fig. 1) When
  • Panasonic AJ-PX5000G | Operating Instructions - Page 122
    SD memory card 1 Download and install the latest P2 Viewer Plus into a computer. 2 With P2 Viewer Plus, generate a CPS password and write it displayed on the remaining capacity bar. Use the cursor buttons (`/{) to set the card to the selected state. 2 Perform manual authentication. 1) On the card
  • Panasonic AJ-PX5000G | Operating Instructions - Page 123
    manual authentication is valid. http://pro-av.panasonic.net/ tt The encrypted microP2 memory card is not recognized on the SD card slot in a computer. tt If the card is unable to be recognized, authenticate with the correct password, or format the card and use Indicates P2 STORE (AJ‑ not supported.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 124
    fully charged battery or an external DC power supply to avoid problems in copying or formatting operations. tt Storage devices with capacities exceeding 2 TB (2048 GB) are not supported. tt Use a storage device within its guaranteed operational range (temperature, etc). tt Do not place the storage
  • Panasonic AJ-PX5000G | Operating Instructions - Page 125
    for each [TYPE S] card. All data included in the card are copied there. You can check the serial number and part number of the P2 card copied using the camera's explorer screen. The maximum number of items that can be copied is 23. rr [FAT] A folder is created for each card. All
  • Panasonic AJ-PX5000G | Operating Instructions - Page 126
    storage devices that allow reading/writing by card) [PARTITION] [VENDOR] [MODEL] [SIZE] [USED] [FREE CAP.] [SELECTED PART.] [TYPE S]/[P2STORE] Vendor name Model name Total capacity (unit: GB) Used capacity (unit: GB) Used P2 card area (unit: number of clips), maximum of 23 Remaining capacity (unit
  • Panasonic AJ-PX5000G | Operating Instructions - Page 127
    tt For [TYPE S] storage devices, you can switch between the partition name and serial name display using the cursor buttons. tt If there is an invalid partition in [P2STORE], the partition information is as display the thumbnail screen for clips saved in a P2 card attached to the camera. - 127 -
  • Panasonic AJ-PX5000G | Operating Instructions - Page 128
    DATE] [TIME] [VERIFY] [NAME] [SIZE] [USED] [FREE CAP.] P2 card serial number P2 card model name Displays a checkmark when a target Verification not performed Partition name defined by the user Total capacity of the storage device Used storage device capacity Remaining storage device capacity
  • Panasonic AJ-PX5000G | Operating Instructions - Page 129
    COMPLETED!] will be displayed when importing is completed. @@NOTE tt Importing to a P2 card that is different from the source P2 card may result in incomplete clips depending on the clips. In this case, use the reconnection function to reconfigure the clips. tt You can switch verification during
  • Panasonic AJ-PX5000G | Operating Instructions - Page 130
    Chapter 7 Menu Operations This chapter describes how to operate the camera menus, the structure, and details of the setting menu.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 131
    ] [SW MODE] [WHITE BALANCE MODE] [USER SW GAIN] [LENS/IRIS] [AGC] These are items for performing fine image adjustments while monitoring the output waveform of the camera using the waveform monitor. You will need support from video engineers to use configure these settings. These menu item settings
  • Panasonic AJ-PX5000G | Operating Instructions - Page 132
    LENS FILE (SD CARD)] [SCENE] [SD CARD PROPERTY] [FORMAT SD CARD] [LOAD USER DATA] [INITIALIZE] [MAINTENANCE] [SYSTEM CHECK] [LENS ADJ] [BLACK SHADING] [WHITE SHADING Chapter 7 Menu Operations - Setting menu structure These items are used when performing various tasks, such as playing back, deleting,
  • Panasonic AJ-PX5000G | Operating Instructions - Page 133
    [SYSTEM] [SYSTEM MODE] [SYSTEM SETUP] [HOURS METER] [VERSION] [UPDATE] [USER MENU SEL] ― Chapter 7 Menu Operations - Setting menu structure These items are used for checking and updating the camera's firmware version. Set the system frequency, the number of lines, and recording format. This menu is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 134
    for three seconds or more when not recording. ffThe main menu is displayed. 2 Use the jog dial button (or the cursor buttons (`/{)) to place the cursor on the return to the upper levels. You can go back to the upper levels by using the jog dial button to place the cursor on the topmost line ([EXIT])
  • Panasonic AJ-PX5000G | Operating Instructions - Page 135
    screen is displayed depending on the menu item. Select the process using the cursor buttons (`/{/I/Y), and press the button. A of lines and frequency setting of the system change. Setting [USER MENU] 1 Select the main menu → [USER MENU SEL]. 2 Select and display various items according to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 136
    Menu list Chapter 7 Menu Operations - Menu list [PAINT] [RB GAIN CONTROL] Item [R GAIN AWB PRE] [B GAIN AWB PRE] [R GAIN AWB A] [B GAIN AWB A] [R GAIN AWB B] [B GAIN AWB B] [AWB A GAIN OFFSET] [AWB B GAIN OFFSET] Description of settings Remark Sets the Rch gain when the switch is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 137
    Chapter 7 Menu Operations - Menu list Item [[S] MATRIX TABLE] [MATRIX R‑G] [MATRIX R‑B] [MATRIX G‑R] [MATRIX G‑B] [MATRIX B‑R] [MATRIX B‑G] Description of settings Selects the color collection table for the linear matrix. [A], [B] Adjusts the linear matrix. (Red - Green) [A]: [−63]...[30]...[63]
  • Panasonic AJ-PX5000G | Operating Instructions - Page 138
    ON] in the main menu → [PAINT] → [KNEE/ LEVEL] → [[S] MANUAL KNEE], you can reduce the coloration phenomenon by changing the following menu items: - Reduce the [KNEE MASTER SLOPE] value of [KNEE/LEVEL] when [HD], [SD], [FILMLIKE1], [FILMLIKE2], or [FILMLIKE3] is selected in the main menu
  • Panasonic AJ-PX5000G | Operating Instructions - Page 139
    [MID SETTING] Chapter 7 Menu Operations - Menu list Item [[S] MASTER GAIN] [H.DTL LEVEL] [V.DTL LEVEL] [DTL CORING] [H.DTL FREQ.] [LEVEL DEPEND.] [MASTER GAMMA] [BLACK GAMMA] [B. GAMMA RANGE] [[S] MATRIX TABLE] [[S] COLOR CORRECT] Description of settings Selects the master gain. [−6dB], [−3dB],
  • Panasonic AJ-PX5000G | Operating Instructions - Page 140
    Chapter 7 Menu Operations - Menu list ffWhen saving or reading setup files from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT].
  • Panasonic AJ-PX5000G | Operating Instructions - Page 141
    ([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets for [PAINT(LEVEL)]. [KNEE/LEVEL] Item [MASTER PED] [[S] MANUAL KNEE] [KNEE MASTER POINT] Description of settings Sets the master pedestal. [−200]...[16]...[200] Sets the mode when the /
  • Panasonic AJ-PX5000G | Operating Instructions - Page 142
    ffWhen [FILMLIKE3] is used, it is recommended to configure the following settings at the main menu → [PAINT] → [KNEE/LEVEL]. - [[S] MANUAL KNEE]: [ON] [30%]...[107%] are factory settings. [FILMLIKE1] [SD] Image level [HD] [FILMLIKE3] [FILMLIKE2] [FILM-REC] [VIDEO-REC] Luminosity [[S] CAMERA
  • Panasonic AJ-PX5000G | Operating Instructions - Page 143
    [VF] Chapter 7 Menu Operations - Menu list [VF DISPLAY] Item [VF/LCD CHAR] [VF MODE] Description of settings Selects whether to display a character on the image of the LCD monitor and viewfinder. [ON] Displays a character on both the viewfinder and LCD monitor. [VF‑OFF] Does not superimpose
  • Panasonic AJ-PX5000G | Operating Instructions - Page 144
    numbers indicate increased brightness. [15] Same brightness as center. [VF USER BOX] The user box can be displayed as a box-type cursor in any position. Item [USER BOX] [USER BOX WIDTH] [USER BOX HEIGHT] [USER BOX H POS] [USER BOX V POS] Description of settings Sets whether to display the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 145
    the function that displays the degree of focus at bar size [ON]/[OFF]. [ON], [OFF] Turns display of the remaining recording capacity for the P2 card [ON]/[OFF]. [ON], [OFF] Remark ffCoordinates iris value display and iris override display. When iris override is changed, it is displayed for three
  • Panasonic AJ-PX5000G | Operating Instructions - Page 146
    message and flashes when recording capacity on the P2 card becomes low. [OFF] Always off; do not use. Selects whether to display [REC] in the side. [ON], [OFF] Sets whether to display the function of each user switch or functions assigned to other switches when the /
  • Panasonic AJ-PX5000G | Operating Instructions - Page 147
    2 of the camera ID to record to the color bars. Up to 10 characters may be used. Setting 3 of the camera ID to record to the color bars. Up to 10 characters may be used. ffTo clear the setting, execute the main menu → [FILE] → [INITIALIZE] → [LOAD FACTORY DATA]. [SHUTTER SPEED] Item [SYNCHRO
  • Panasonic AJ-PX5000G | Operating Instructions - Page 148
    remote control when connected to the remote control unit (AJ‑RC10G) and extension control unit (AG‑EC4G), the shutter settings will be the setting in each unit. [USER SW] Item [USER MAIN] (Select a function) (Detection time) Description of settings Assigns the button. For
  • Panasonic AJ-PX5000G | Operating Instructions - Page 149
    down for approx. one second. Assigns the button. For selectable functions and an explanation of functions, refer to "Assigning functions to buttons" (page 56). [SHOT MARK] is assigned in the factory setting. Selects a response to accept when the button is pressed
  • Panasonic AJ-PX5000G | Operating Instructions - Page 150
    use. [SMPTE] Uses SMPTE standard color bars. [FULL BARS] Uses full color bars. [SPLIT] Uses SPLIT color bars for SNG (Satellite News Gathering). [ARIB] Uses button. Selects camera operation when the remote control unit (AJ‑RC10G) ffThis item is scheduled to be supported in
  • Panasonic AJ-PX5000G | Operating Instructions - Page 151
    the color temperature is changed. are factory settings. [USER SW GAIN] Item [S.GAIN] [DS.GAIN] Description of settings Selects the gain is selected in [IRIS GAIN], this setting is enabled. [1]...[10]...[20] Remark ffWhen using the lenses with extenders (such as x2 and x0.8) sold prior to the FUJINON
  • Panasonic AJ-PX5000G | Operating Instructions - Page 152
    or used capacity, when P2 card information is displayed. [REMAIN] Displays remaining capacity. [USED] Displays used capacity ] → [SYSTEM MODE] matches the current setting status. Example) [1080‑59.94i], [AVC‑I100], [24BIT] [SELECTED CLIPS] Displays only the clips selected with the button
  • Panasonic AJ-PX5000G | Operating Instructions - Page 153
    currently in use (slots 1 and 2 or slots 3 and 4) can be combined and exported. [IMPORT] Imports (writes-back) clips from a storage device to a P2 card in display area. [TC] Displays the time code. [UB] Displays the user bits. [TIME] Displays the record time. [DATE] Displays the record
  • Panasonic AJ-PX5000G | Operating Instructions - Page 154
    user bits. [REC RATE] Displays the recording frame rate. [LAST UP DATE] Displays the date of last update. [LAST UP PERSON] Displays the last person who updated mode. [ON] Verifies. [OFF] Does not verify. Remark ffValid for use in storing to type S format only. are factory settings. [REC/PB
  • Panasonic AJ-PX5000G | Operating Instructions - Page 155
    up to 8 seconds in other modes. HD, DVCPRO50: [0s]...[8s] DV or Uses P2 memory cards (slots 1 and 2). [microP2] Uses microP2 memory cards (slots 3 and 4). Selects whether to divide the recording file in 4 GB units or one file when recording in the microP2 memory card (that exceeds 32 GB) in AVC
  • Panasonic AJ-PX5000G | Operating Instructions - Page 156
    REC TC] [TC OUT] Description of settings Selects the user bits mode. [USER] Selects the user bits value set in the display window. [TIME] Selects P2 card at the first recording after power is turned on, a P2 card is inserted, or the P2 card targeted for recording is switched. [PRESET] Uses
  • Panasonic AJ-PX5000G | Operating Instructions - Page 157
    code last recorded to the P2 card at the next recording when the button that assigns recording check function or the button is pressed. [ . Checks and corrects loaded metadata. [LANGUAGE] Sets the language used to display metadata. [ENGLISH], [JAPANESE] Remark ffThis item is
  • Panasonic AJ-PX5000G | Operating Instructions - Page 158
    . [1080i] Converts to 1080i and outputs. Selects 1080P signals of the HD SDI output in 1080P mode. [LEVEL‑A] Selects the LEVEL‑A method. [LEVEL AREA] [FRAME MARK] [FRAME SIG] [USER BOX] [USER BOX WIDTH] [USER BOX HEIGHT] [USER BOX H POS] [USER BOX V POS] Description of settings Switches the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 159
    the main menu → [I/F SETUP] → [DOWNCON SETTING] → [DOWNCON MODE] is set to [SIDE CROP] or [LETTER BOX], the user box is not displayed to the down converter output signal in HD mode. are factory settings. [DOWNCON SETTING] Item [DOWNCON MODE] [DETAIL] [H.DTL LEVEL] [V.DTL LEVEL] [DTL CORING] [H.DTL
  • Panasonic AJ-PX5000G | Operating Instructions - Page 160
    terminal. (at 1080/59.94i, 1080/50i only) [HD SDI] Locks the HD SDI output signal to generator lock input. The video start position of the adjustment is disabled. Can be adjusted using [LVL CONTROL CH4(CH2)] at this time. Can be manually adjusted with this item when automatic level
  • Panasonic AJ-PX5000G | Operating Instructions - Page 161
    Chapter 7 Menu Operations - Menu list Item Description of settings Remark [LVL CONTROL CH4(CH2)] Can be manually adjusted with this item when automatic level adjustment of audio ffThe channel is replaced when [CH3/4] is selected CH4 (CH2) is [OFF]. in [VR SELECT].
  • Panasonic AJ-PX5000G | Operating Instructions - Page 162
    connect an external hard disk drive or other device. [DEVICE] Selects the USB mode when connecting the camera to a computer via USB 2.0, and using the P2 card as mass storage. [USB MODE] Turns operation of the mode selected in [USB MODE SELECT] [ON]/[OFF]. [ON], [OFF] Remark ffThis item cannot
  • Panasonic AJ-PX5000G | Operating Instructions - Page 163
    page 163) according to the battery in use. Sets the type of charge level to P2 card near end. [ON], [OFF] Sets remaining time to emit the P2 card near end warning. [2min], [3min] Sets whether to output the warning sound at P2 [AUTO] Automatically set. [MANUAL] Manually set. Selects the near
  • Panasonic AJ-PX5000G | Operating Instructions - Page 164
    detected, this will follow the end voltage value set in [TYPE A]. ffWhen using a battery which displays battery charge level by units of 10%, end is cards cannot be read, and file operations associated with saves, [LOAD USER DATA] and [LOAD FACTORY DATA] cannot be performed in the following cases
  • Panasonic AJ-PX5000G | Operating Instructions - Page 165
    menu → [CAMERA] → [CAMERA ID]. Handles the menu in the main menu → [USER MENU SEL]. Handles the menu adjustment value in the main menu → [PAINT]. Handles the Selects the lens file saved to the camera memory, loads it and uses it as a setting value for the current operation. Specifies and saves the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 166
    All menu values are set to factory settings. [SAVE USER DATA] User menu setting values are saved as user data in the camera memory. Can be used as saved data the user can uniquely set. Load user data in the main menu → [FILE] → [LOAD USER DATA]. Remark ffThe following data is not returned to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 167
    [ON], [OFF] White shading correction is performed manually. Adjusts sawtooth waveforms and parabolic wave forms of RGB B FLARE] Description of settings Remark Selects the mode to perform lens adjustment. [ON] Uses the adjustment value of this [LENS FILE ADJ]. The Rch and Bch gain adjusted in
  • Panasonic AJ-PX5000G | Operating Instructions - Page 168
    Viewer that is not 24-bit compatible. Always use the latest P2 Viewer Plus version. ffFor 24-bit compatible P2 devices and the latest P2 Viewer Plus information, visit the P2 support page on the following website. http://pro-av.panasonic.net/ ffOnce the power is turned off, it is always set to [CAM
  • Panasonic AJ-PX5000G | Operating Instructions - Page 169
    each firmware version. [UPDATE] Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD memory card.) [USER Description of settings Select the region in which to use the camera before the initial use. [NTSC] Selects an NTSC region other than Japan
  • Panasonic AJ-PX5000G | Operating Instructions - Page 170
    to/read from the SD memory card in main menu → [FILE] → [SETUP DATA (SD CARD)]. -- U: Can save/read as user data. Refer to the main menu → [FILE] → [LOAD USER DATA] (page 166), [INITIALIZE] (page 166). -- F: Can read in main menu → [FILE] → [INITIALIZE] → [LOAD FACTORY DATA]. Refer to [INITIALIZE
  • Panasonic AJ-PX5000G | Operating Instructions - Page 171
    (PHASE)] [Yl‑Yl‑R (PHASE)] [Yl‑R (PHASE)] [Yl‑R‑R (PHASE)] [USER MENU] By page By item - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Data file
  • Panasonic AJ-PX5000G | Operating Instructions - Page 172
    ([PAINT]) [KNEE APE LVL] [DTL GAIN(+)] [DTL GAIN(−)] [DTL CLIP] [DTL SOURCE] [MASTER DTL] [USER MENU] By page By item - l - l - l - l - l - l Data file S C U F l l l l l l l l l l l l l l l l l l l l l l l l [SKIN TONE DTL] Item ([PAINT]) [[S] SKIN TONE
  • Panasonic AJ-PX5000G | Operating Instructions - Page 173
    Menu list [KNEE/LEVEL] Item ([PAINT]) [MASTER PED] [[S] MANUAL KNEE] [KNEE MASTER POINT] [KNEE MASTER SLOPE] [[S] WHITE CLIP] [WHITE CLIP LVL] [A.KNEE POINT] [A.KNEE LVL] [A.KNEE RESPONSE] [CHROMA LEVEL] [DRS MODE] [DRS EFFECT DEPTH] [[S] HI‑COLOR SW] [HI‑COLOR LVL] [USER MENU] By page By item
  • Panasonic AJ-PX5000G | Operating Instructions - Page 174
    - Data file S C U F - l l l - l l l - l l l - l l l - l l l - l l l - l l l [VF USER BOX] Item ([VF]) [USER BOX] [USER BOX WIDTH] [USER BOX HEIGHT] [USER BOX H POS] [USER BOX V POS] [USER MENU] By page By item l*1 - l*1 - l*1 - l*1 - l*1 - Data file
  • Panasonic AJ-PX5000G | Operating Instructions - Page 175
    [POSITION2] [POSITION3] [POSITION4] [POSITION5] [POSITION6] [USER MENU] By page By item - - - - - USER MENU] By page By item - - - - - - - - - - - - Data file S C U F - l l l - l l l - l l l - l l l - l l l - l l l [USER SW] Item ([CAMERA]) [USER
  • Panasonic AJ-PX5000G | Operating Instructions - Page 176
    IRIS LEVEL] [A.IRIS PEAK/AVE] [A.IRIS WINDOW] [S.IRIS LEVEL] [IRIS GAIN] [IRIS GAIN VALUE] [USER MENU] By page By item - l - l - l - l - l - l Data file S C U F - l l l - l l l - l l l - l l l - l l l - l l l [AGC] Item ([CAMERA]) [AGC] [AGC LIMIT] [AGC
  • Panasonic AJ-PX5000G | Operating Instructions - Page 177
    l - l l l - l l l - l l l - l l l - l l l - l l l [PROXY SETUP] Item ([REC/PB]) [REC MEDIA] [REC MODE (HD)] [TC SUPER] [PROXY DISP] [USER MENU] By page By item l - l - l - l - Data file S C U F - l l l - l l l - l l l - l l l [TC/UB] Item
  • Panasonic AJ-PX5000G | Operating Instructions - Page 178
    - l l l [MONI OUT MARKER] Item ([I/F SETUP]) [CENTER MARK] [SAFETY MARK] [SAFETY AREA] [FRAME MARK] [FRAME SIG] [USER BOX] [USER BOX WIDTH] [USER BOX HEIGHT] [USER BOX H POS] [USER BOX V POS] [USER MENU] By page By item l - l - l - l - l - l - l - l - l - l - Data file
  • Panasonic AJ-PX5000G | Operating Instructions - Page 179
    ([I/F SETUP]) [BACKLIGHT] [BRIGHTNESS] [COLOR LEVEL] [CONTRAST] [SELF SHOOT] [VF/LCD CHAR] [USER MENU] By page By item - l*1 - l*1 - l*1 - l*1 - l - l Data file S C U F - l l l - l l l - l l l - l l l - l l l - l l l Item ([I/F SETUP]) [BATTERY/P2CARD
  • Panasonic AJ-PX5000G | Operating Instructions - Page 180
    MENU] By page By item - - - - Data file S C U F - - - - - - - - [LENS FILE] Item ([FILE]) [LOAD] [SAVE] [CLEAR ALL FILE] [USER MENU] By page By item - - - - - - Data file S C U F - - - - - - - - - - - - [LENS FILE (SD CARD)] Item ([FILE]) [LOAD] [SAVE
  • Panasonic AJ-PX5000G | Operating Instructions - Page 181
    Chapter 7 Menu Operations - Menu list [SD CARD PROPERTY] Item ([FILE]) [SD STANDARD] [USED] [BLANK] [TOTAL] [PROXY REM] [NUMBER OF CLIPS] [PROTECT] [USER MENU] By page By item l*1 - l*1 - l*1 - l*1 - l*1 - l*1 - l*1 - Data file S C U F - - - - - - - - - - - - -
  • Panasonic AJ-PX5000G | Operating Instructions - Page 182
    ] Item ([SYSTEM]) [LINE&FREQ] [REC FORMAT] [AUDIO SMPL RES] [REC SIGNAL] [ASPECT] [SCAN REVERSE] [USER MENU] By page By item l - l - l - l - l - l - Data file S C U F - l l l - l l l - l l l - l l l - l l l - l l l [SYSTEM SETUP] Item ([SYSTEM]) [SETUP
  • Panasonic AJ-PX5000G | Operating Instructions - Page 183
    Chapter 8 Connecting to External Devices
  • Panasonic AJ-PX5000G | Operating Instructions - Page 184
    The camera records to P2 cards. These large-capacity P2 cards feature outstanding transfer speeds to enable HD recording, smooth editing cable (optional) with double or more shielded. For the HDMI cable, use of the Panasonic HDMI cable is recommended. *3 For the BNC cable (optional) connected to
  • Panasonic AJ-PX5000G | Operating Instructions - Page 185
    connecting the camera to a computer via USB 2.0, the P2 card inserted in the camera can be used as mass storage. Connecting to a computer m is supported, however, a cable of 3 m or shorter is recommended as preferable. tt [USB MODE] can be assigned to the buttons (/
  • Panasonic AJ-PX5000G | Operating Instructions - Page 186
    procedure of the driver, refer to the installation manual on the website. For the latest information on the driver, visit the following website. http://pro-av.panasonic.net/ tt The camera supports only USB 2.0. Ensure your computer supports USB 2.0. tt When connecting the camera to a computer
  • Panasonic AJ-PX5000G | Operating Instructions - Page 187
    to External Devices - Connecting to the remote control unit (AJ‑RC10G) Connecting to the remote control unit (AJ‑RC10G) The following functions are scheduled to be supported in future upgrades. ffConnect the remote control unit AJ‑RC10G (optional) to remote-control some functions. ffWhen you
  • Panasonic AJ-PX5000G | Operating Instructions - Page 188
    Connecting to the extension control unit (AG‑EC4G) Connecting to the extension control unit (AG‑EC4G) The following functions are scheduled to be supported in future upgrades. ffConnect the extension control unit AG‑EC4G (optional) to remote control some functions. ffWhen you connect AG‑EC4G and set
  • Panasonic AJ-PX5000G | Operating Instructions - Page 189
    Chapter 9 Maintenance and Inspection Inspect the various parts of the camera before shooting. This chapter also explains the warnings and error messages displayed on the viewfinder screen.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 190
    It is recommended that you check the image using a color video monitor. Preparing to inspect P2 card of the recording target slot. 4 Insert a P2 card into a card slot and close the slot cover. (Fig. 2) ffEnsure that the P2 manual zoom mode and check the behavior of the manual zoom. Rotate the manual
  • Panasonic AJ-PX5000G | Operating Instructions - Page 191
    P2 card slots, press the buttons (//) to which [SLOT SEL] is assigned and switch the target P2 the audio volume. Inspecting the audio level manual adjustment 1 Set the the earphones volume changes. Inspections for using an external microphone 1 Connect the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 192
    Chapter 9 Maintenance and Inspection - Inspections before shooting 7 Set the switch to . Check that each time the button is pressed, [VTCG] → [DATE] → [TIME] → no display (time zone) → [TCG] value is displayed and that this value is accurate. If [DATE], [TIME], and the time zone
  • Panasonic AJ-PX5000G | Operating Instructions - Page 193
    Maintenance Chapter 9 Maintenance and Inspection - Maintenance Charging the built-in battery The camera uses the built-in battery to remember the date and time. If the camera is not turned on for more than a half year, the built-in
  • Panasonic AJ-PX5000G | Operating Instructions - Page 194
    some operation is performed after recording. The [END] display flashes in the P2 remaining charge display. (If the viewfinder has the [SAVE] lamp, and to sound until some operation is performed after recording. The P2 card space is used up. Recording will stop. Delete clips in the recording media or
  • Panasonic AJ-PX5000G | Operating Instructions - Page 195
    flash when it occurs during playback. [CARD ERROR] (slot number) is displayed. ffWhen recording stops due to an error, it is displayed until the P2 card operates. ffDisplayed when it occurs during playback. (for at least three seconds) If the error occurs during recording, it sounds four times per
  • Panasonic AJ-PX5000G | Operating Instructions - Page 196
    . Continue Playback is interrupted on the SDHC/SDXC memory card. A card whose playback performance cannot be assured is inserted. Use of microP2 or P2 memory card is recommended. Continue Proxy error For details, refer to "Error displays about proxy data recordings" (page 43). Continue
  • Panasonic AJ-PX5000G | Operating Instructions - Page 197
    Use of microP2 or P2 memory [UNKNOWN DATA!] Description Manual authentication failed. Data supported by the camera. Match the device and content versions. The metadata character code is invalid. The metadata character code is UTF-8. Enter valid characters using a viewer. There is a problem
  • Panasonic AJ-PX5000G | Operating Instructions - Page 198
    [RETRY PASSWORD IS DIFFERENT!] Description Manual authentication failed. An attempt is made to enter the [PERSON] item (user who enters the memo) when there empty. Format the P2 card. Use a new storage device with sufficient available space or a formatted storage device. Use the P2 cards of the
  • Panasonic AJ-PX5000G | Operating Instructions - Page 199
    after logging in to PASS. Other benefits are offered to registered users. For details, refer to the website (http://panasonic.biz/sav/pass_e) of PASS (P2 Asset Support System). 2 Check the version using the camera and apply the update Check the version of the camera in the main menu → [SYSTEM
  • Panasonic AJ-PX5000G | Operating Instructions - Page 200
    Chapter 10 Specification This chapter describes the dimensions, specifications, and connector signals.
  • Panasonic AJ-PX5000G | Operating Instructions - Page 201
    32 inches) 267 mm (10-1/2 inches) Specifications General Power DC 12 V (11.0 V - 17.0 V) Power consumption 29 W (body only, 1080/59.94i, AVC‑Intra 100 standard recording status, LCD ON) 70 W (with all optional accessories connected and maximum power supplied from each output terminal) indicates
  • Panasonic AJ-PX5000G | Operating Instructions - Page 202
    format Recording format Recording video signal Recording and playback time P2 memory card, microP2 memory card 1080/59.94p, 1080/59.94i, 480/59.94i 1080/50p, 1080/50i, 576/50i AVC‑Intra 100/AVC‑Intra 50 AVC‑LongG 50/AVC‑LongG 25 Switching DVCPRO HD/DVCPRO50/DVCPRO/DV formats 1080/59.94p, 1080/59
  • Panasonic AJ-PX5000G | Operating Instructions - Page 203
    - Dimensions and specifications BNC×1 HD (3G/1.5G), SD: 0.8 V [p-p], 75 Ω Switch the menu to use as terminal/return −60 dBu (−60/−50 dBu selectable menu) Phantom +48 V supported, −60 dBu (−60/−50 dBu selectable menu) XLR×1, 5-pin Phantom +48 V (selectable
  • Panasonic AJ-PX5000G | Operating Instructions - Page 204
    OUT(H) 3 L CH OUT(C) 4 R CH OUT(H) 5 R CH OUT(C) Panasonic Parts No.: K1AA105H0016 Manufacturer Parts No.: HA16RD-5P(76) (Hirose Electric Co.) @@NOTE external device using a pin plug, release pins 3 and 5. The following is a connection example. Pin terminal L CH R CH Do not use the cable
  • Panasonic AJ-PX5000G | Operating Instructions - Page 205
    output to remote control 7 R/C VIDEO GND GND for video signal to remote control 8 NC Not used 9 UNREG+12 V DC 12 V power supply (AJ‑RC10G: Max. 0.75 A) 10 GND GND Panasonic Parts No.: K1AY110JA001 Manufacturer Parts No.: HR10A-10R-10SC (71) (Hirose Electric Co.) Manufacturer Parts
  • Panasonic AJ-PX5000G | Operating Instructions - Page 206
    wireless microphone receiver 18 VIDEO OUT Not used 19 VIDEO RET Not used 20 VIDEO EN Not used 21 RM 1 (RM CLK) Not used 22 RM 2 (RM DATA) Not used 23 RM 3 (RM WR) Not used 24 RM+5 V Not used 25 RM GND Not used Panasonic Parts No.: K1GB25A00010 Manufacturer Parts No.: HDBB
  • Panasonic AJ-PX5000G | Operating Instructions - Page 207
     131 [COLOR CORRECTION]  137 Setting menu  134 Connector signal  204 [USER MENU]  131 CTL counter  68 Metadata  116 Cue up  45 [MIC ]  166 Status display  120 Formatting Write back  129 P2 card  118 P2 memory card  31 SD memory card  86, 118 Inserting
  • Panasonic AJ-PX5000G | Operating Instructions - Page 208
    UPDATE]  169 Proxy recording  41 USB  185 [PROXY SETUP]  156 Device mode  185 R Storage mode  123, 186 [USB/LAN]  162 Rain cover  105 User bits  63 [RB GAIN CONTROL]  136 USER Setting the region of use  11 Zebra patterns  80 Setting [USER MENU]  135 [
  • Panasonic AJ-PX5000G | Operating Instructions - Page 209
    Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used old products and used batteries, please service or the point of sale examples): This symbol might be used in combination with a chemical symbol
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
Operating Instructions
Memory Card Camera-Recorder
Before operating this product, please read the instructions carefully and save this manual for future use.
ENGLISH
VQT5E21A-1(E)
M0913HM1103 -YI
Register now!!
This product is eligible for
the P2HD 5 Year Warranty
Repair Program.
For details, see page 5.
http://panasonic.biz/sav/pass_e/
Model No.
AJ-PX5000G