Panasonic CF-52ELNBD2M Reference Manual

Panasonic CF-52ELNBD2M - Cf52 C2d/2.4 15.4 2Gb 160Gb Dvdr Wls Bt Wxp-Wv Manual

Get Panasonic CF-52ELNBD2M - Cf52 C2d/2.4 15.4 2Gb 160Gb Dvdr Wls Bt Wxp-Wv PDF manuals and user guides
UPC - 092281894560
View all Panasonic CF-52ELNBD2M manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic CF-52ELNBD2M manual content summary:

  • Panasonic CF-52ELNBD2M | Reference Manual - Page 1
    1 Reference Manual Personal Computer CF-52 Model No. Series We recommend that this Reference Manual be printed. Descriptions • For common procedures and screens for Windows 7 and Windows XP, this Reference Manual uses the procedures and screens of Windows 7. • Some menus may differ for Windows XP. •
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 2
    XP default setting. In these instructions, the names are referred as follows. z "Windows® 7 Professional" as "Windows" or "Windows 7" z "Microsoft® Windows® XP Professional" as "Windows" or "Windows XP" Windows Update You can update to the latest patches and service packs for Windows with the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 3
    Introduction 3 C In [Change settings for the plan], click [Change advanced power settings]. D In [Advanced settings], double-click [USB settings]. E Double-click the displayed [USB selective suspend setting]. F Change settings of [On battery] and [Plugged in] to [Enabled]. G Click [OK] and exit
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 4
    External display NOTE z When an external display is connected to an optional port replicator (CF- VEB522), the display switching may work differently from the above. For further information, refer to the instruction manual of the port replicator. CAUTION z Do not press any keys until the display has
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 5
    Key Combinations Key Fn + F4 Function Speaker on/off NOTE z Beeps do not sound if you turn off the speaker sound. Fn + F5 Fn + F6 Volume (Fn + F5= down / Fn + F6= up) NOTE z When fine-tuning the sound volume, press and hold Fn, and press F5 or F6 intermittently. z This does not work on beeps or
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 6
    key. Use this when pressing difficult key combinations. • Pop-up icon on/off 1 Start up the Hotkey Settings. Click (Start)*3 - [All Programs] - [Panasonic] - [Hotkey Settings]. 2 Make the settings. [Use Fn key lock] z When using an Fn key combination A Press Fn once. (Locked) B Press another key
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 7
    Sleep and Hibernation Functions 7 Starting Up Your Computer Quickly The sleep*1 or hibernation functions allow you to shut off the computer without closing programs and documents. You can quickly return to the programs and documents that you were working on before sleep*1 or hibernation. Function
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 8
    [Security] menu of the Setup Utility (Î page 85). CAUTION The following problems will occur when you fail the password input (failing three times or leaving password input while resuming from hibernation: • At the next resume, Panasonic boot screen will appear. At this time, do not start the Setup
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 9
    Sleep and Hibernation Functions 9 Entering/Resuming from Sleep or Hibernation „ To enter sleep*3 or hibernation 1 Close the display, or press the power switch (A) until a beep*4 sounds. Sleep*3: The power indicator (B) blinks green. Hibernation: The power indicator (B) goes off. z You can
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 10
    *3 while a USB keyboard or mouse is connected, touching the USB keyboard keys or mouse will resume the computer. NOTE z After resuming from sleep or hibernation, the message "TosBtMng has stopped working" may appear. Click [Close program]. If Bluetooth connections
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 11
    page 85): For further information, refer to the Installation Manual of "Trusted Platform Module (TPM)". Setting the Supervisor Password Supervisor Password, you will not be able to use your computer. Contact Panasonic Technical Support. z When running the Setup Utility, do not leave and go away from
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 12
    without setting the Supervisor Password. Set the Supervisor Password beforehand (Î page 11). z When you have your hard disk drive repaired • Contact Panasonic Technical Support. • Before sending back the hard disk drive, be sure to set the [Hard Disk Lock] to [Disabled]. NOTE z The hard disk
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 13
    Security Measures 13 Disabling CD/DVD Drive Disable CD/DVD drive operation to prevent the drive from being read/written and from being used to start the computer. You can protect your data from unauthorized access or accidental overwriting. 1 Select [Disabled] in [Optical Drive] in the [Advanced]
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 14
    Battery Power 14 Battery Indicator Battery indicator Battery status Not lit Orange The battery pack is not inserted or not being charged. Charging is in progress. Green Blinking green The battery is fully-charged. In high temperature mode, the battery pack is discharging the power to 80%*1
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 15
    Battery Power 15 Checking the Remaining Battery Charge You can check the remaining battery charge on the screen. (After logging on to Windows) 1 Press Fn + F9. z When the battery pack is inserted (example) : Normal temperature mode (Î page 16) : High temperature mode (Î page 16) z When the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 16
    Battery Power 16 High temperature mode The high temperature mode can prevent the battery from deteriorating when the computer is used in high-temperature environment or used for a long time with its battery fully charged. Select [Auto] (default) or [High Temperature] in [Environment] of the [Main]
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 17
    with the battery down and you resume the operation without charging the battery, the Windows Resume Loader starts up. Follow the on-screen instructions. After that, however, Windows may not start up normally, or the [Low battery level]/[Critical battery level] function may not work normally. When
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 18
    Start)*4 - [All Programs] - [Panasonic] - [Battery] - [Battery CF-VZSU29ASU)/3 hours (with CF-VZSU65U) • Complete discharge: Approximately 3 hours, 4 hours (with CFVZSU29ASU)/2.5 hours (with CF hold F9 while the [Panasonic] boot screen is displayed just
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 19
    Battery Power 19 Replacing the Battery Pack The battery pack (CF-VZSU29AU/CF-VZSU65U) is a consumable item so the replacement will be necessary. If the battery operation time becomes noticeably short and not recovered even after recalibrating the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 20
    Battery Power 20 z To insert Insert the battery pack until it securely fits the connector. 4 Slide the cover back. Push the cover until it clicks. CAUTION z Make sure the latch is securely locked, otherwise the battery pack may fall when you carry the computer. z Do not remove the battery pack
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 21
    multimedia pocket device in sleep*1 or hibernation, or when the drive indicator is on. *1 Windows XP: standby NOTE z Read the instruction manuals of the devices carefully. Replacing the Multimedia Pocket Device 1 Disable the multimedia pocket device function. A Click on the notification area and
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 22
    Multimedia Pocket 22 3 Carefully insert the device into the multimedia pocket by push- ing both corners until it surely fits in the slot. z The computer must be on when inserting the device. z Insert the device with the label side up. CAUTION z Hold the device by its both sides. Otherwise the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 23
    CD/DVD Drive 23 NOTE z Connect the AC adaptor if writing operation takes a long time. If the remaining battery power becomes low and the power is not supplied, writing operation may not be completed. z You need to use writing software to write to discs (e.g. "Using Roxio Creator LJB" Î page 31).
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 24
    , copy protection, recording equipment/software that was used to create the disc, etc.) z Before using a disc, carefully read the operating/handling instructions and package of the disc. z If the discs are not handled appropriately, they may become dirty or scratched. Furthermore the writing speed
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 25
    DVD-RAM*1 DVD-R DVD-R DL DVD-RW*2 +R +R DL 25 +RW *1 DVD-RAM: Only non-cartridge type or removable cartridge type can be used. *2 Does not support DVD-RW Ver.1.0. z You can read from the following discs. CD-ROM CD DIGITAL AUDIO CD TEXT CD-EXTRA DVD-ROM DVD-Video Video CD
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 26
    SPEED (8.5 GB) • DVD-RW 1X-SPEED (4.7 GB/9.4 GB) 1-2X-SPEED (4.7 GB/9.4 GB) 2-4X-SPEED (4.7 GB/9.4 GB) 2-6X-SPEED (4.7 GB/9.4 GB) 26 • DVD-R Panasonic Corporation MITSUBISHI KAGAKU MEDIA CO., Ltd. TAIYO YUDEN Co., Ltd. • DVD-R DL MITSUBISHI KAGAKU MEDIA CO., Ltd. • DVD-RW MITSUBISHI KAGAKU MEDIA CO
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 27
    . Be extremely careful because you cannot change the region code anymore after the fifth change, even if you reinstalled the operating system. z Any problem resulting from illegal changing or altering of the region code is the user's responsibility. NOTE z [Confirm Region] appears when the DVD-Video
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 28
    CD/DVD Drive 28 NOTE z To remove a disc when the computer is powered off, insert a pin of 1.3 mm {0.05″} in diameter into the emergency hole (C). (When the diameter of the pin is smaller than this, insert the pin slightly downward.) Pushing it to the end allows the tray to come out. (The position
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 29
    InterVideo WinDVD for Panasonic]. „ To access the online manual After starting SUPPORT INFORMATION If WinDVD does not operate properly, we recommend carefully reading the online help file first for problems with the operating environment or operations. If you still cannot troubleshoot the problem
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 30
    the discs. z You must finalize*4 DVD-R, DVD-R DL, DVD-RW, +R, +R DL, and +RW before playback. For further information, refer to the instruction manual of the DVD recorder. z You cannot play discs protected with copyright management technologies such as CPPM (Content Protection for Prerecorded Media
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 31
    ], and double-click [DVD RW Drive]. z Follow the on-screen instructions. Using Roxio Creator LJB "Roxio Creator LJB" is a CD/DVD application developed by SONIC Solutions. For further information, refer to the software's online manual (below). 1 Click (Start)*1 - [All Programs] - [Roxio] - [Roxio
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 32
    recommend that you choose the format type depending on the application. Format FAT32 UDF1.02 UDF1.50 UDF2.00/2.01 UDF2.5 Feature This format is supported by Windows 95 (OSR2) / 98 / Me / 2000 / XP / Vista / 7. DVD-RAM discs in FAT32 format cannot be used on Windows 95 (other than OSR2) / Windows
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 33
    input [c:\util\drivers\ramdrvr\english\setup.exe] and then click [OK]. As for english folder, change to the language you install. Follow the on-screen instructions. „ Logical format type There are six types of DVD-RAM formats (Î page 32). We recommend that you choose the format type depending on the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 34
    util\drivers\ramdrvr\english\setup.exe] and then click [OK]. As for english folder, change to the language you install. Follow the on-screen instructions. E Click in [Format Type], and select the format type, then click [Start]. • [Volume label] UDF format has been selected, input the volume label
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 35
    click [Cancel] to reinstall. SUPPORT INFORMATION z About User Registration instructions. z If Roxio Creator LJB does not operate properly, we recommend carefully reading the online help file first for problems with the operating environment or operations. If you still cannot troubleshoot the problem
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 36
    model with ExpressCard slot) z PC Card Type I (3.3 mm) or II (5.0 mm) to the PC Card slot (B) NOTE z The following types of card are not supported: securely fits in to the slot. z For further information, refer to the instruction manual of the card. „ To remove the card 1 Disable the card function.
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 37
    . In this case, restart the computer. z If the computer freezes after resuming from sleep*1 or hibernation, remove and reinsert the card. If the problem per- sists, restart the computer. z When a card is inserted, power consumption increases. Remove the card when it is not in use, especially when
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 38
    function which is compatible with content on-demand services on the Internet, etc. z To format the panasonic.jp/support/global/cs/sd/download/sd_formatter.html z To use the SD Memory Card on other devices, format the card on the devices. For further information, refer to the instruction manual
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 39
    area and click . B Select the card. A Double-click on the notification area and select the card, then click [Stop]. B Follow the on-screen instructions. z These steps are not necessary when removing the card after turning off the computer. 2 Remove the card. A Press the card so it comes out of
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 40
    Smart Card 40 You need software to use a Smart Card. CAUTION z Do not: • Hit, bend, or drop the card. • Touch the contact part with
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 41
    failure. RAM module specifications: 204 pins, SO-DIMM, 1.5 V, DDR3 SDRAM, PC3-8500 (For information of RAM module compatibility, contact Panasonic Technical Support.) CAUTION RAM modules are extremely sensitive to static electricity and can be affected even by static electricity from the human body
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 42
    RAM Module 42 4 Insert/Remove the RAM module. z To insert A Tilt the module slightly and insert it in the slot. B Press down the module so that the right and left hooks (B) are locked. z To remove A Carefully open the right and left hooks (B). The module will rise. B Carefully remove the module
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 43
    43 You can use an optional port replicator (CF-VEB522). This device frees you from being bothered by of the computer. For further information, refer to the instruction manual of the port replicator. NOTE z Use only the specified port replicator (CF-VEB522). z Hot or warm docking/undocking is not
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 44
    you to switch the output destination by pressing + P*2 or Fn + F3. (CF-52M/N series only) z When you use the external display only, set the suitable files may not be played back smoothly. z Carefully read the instruction manual of the external display. z When connecting an external display that
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 45
    Settings] - [Advanced] - [Troubleshoot] CAUTION z Before disconnecting the CF-52M/N series only) z When an external display is connected to an optional port replicator (CF-VEB522), the display switching may work differently from the above. For further information, refer to the instruction manual
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 46
    drag an object from the internal LCD to the external display and vice versa. 1 Press + P or Fn + F3. 2 Select [Extend]. 3 Press Enter. 1 Right-click the desktop, and click [Graphics Properties]. [Intel® Graphics and Media Control Panel] screen appears. 2 Click [Multiple Displays
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 47
    the display by pressing Fn + F3. „ To change the display settings 1 Right-click the desktop, and click [Graphics Properties]. 2 Set the display color and resolution etc. 5 Click [Apply]. 6 Click [OK]. 1 Click (Start) - [Control Panel] - [Adjust screen resolution
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 48
    External Display 48 1 Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings]. 2 Change to preferred settings. 3 Select [OK].
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 49
    information, refer to the instruction manual of the USB device. instructions. z These steps are not necessary when; • Removing the device after turning off the computer. • or is not displayed. • The device does not appear in the list in step B. 2 Remove the USB device. CAUTION
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 50
    USB Devices 50 NOTE z You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction manual of the USB device. z You may need to install the driver again when connecting the device to another port. z When a USB device is connected, sleep*1
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 51
    IEEE 1394 Devices 51 You can connect a digital You may need to install the driver for the IEEE 1394 device. Follow the on-screen instructions or refer to the instruction manual of the IEEE 1394 device. To remove IEEE 1394 device CAUTION Turn off the IEEE
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 52
    Fingerprint Reader 52 . Fingerprint Reader NOTE z Enrollment and authentication is unavailable to an extremely minority of people including those whose fingerprints give little data for
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 53
    Power-on Security Step 3 TPM Fingerprint Utility Initialization (If the TPM is not being used, skip this step.) „ To access the online manual This manual describes Step 2, 3 and the initial part of Step 4. For further steps, refer to the Protector Suite Help menu. z Click (Start)*1 - [All Programs
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 54
    for such an interaction. Installation 1 TPM Installation Refer to the Installation Manual of "Trusted Platform Module (TPM)". z Click (Start), input [OK]. C Click [Next]. Installation starts. Follow the on-screen instructions. D When the "Protector Suite *.* has been successfully installed." message
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 55
    stored on the hard disk. Hardware protection of the user data is not possible, but multiple users can enroll their fingerprints. z Follow the on-screen instructions. NOTE z Enroll at least two fingers. Even if one of them is injured, you can use another one to access your account and secret data
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 56
    Fingerprint Reader 56 z We recommend you use the Power-on Security feature. This feature prevents unauthorized access to the user's computer at the BIOS level. A Click (Start)*2 - [All Programs] - [Protector Suite] - [Control Center]. B Click [Identity] - [Status]. C Click [Power-on security
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 57
    Security effective, after step B, your fingerprint authentication will be necessary. A Turn on or restart the computer. B Press F2 or Del while [Panasonic] boot screen is displayed soon after the computer starts the startup procedure. C Select the [Security] menu. D Select [Set Supervisor Password
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 58
    Fingerprint Reader 58 Useful Information Backup The file described below is necessary for recovering the Fingerprint authentication data. Back up this file periodically in a safe location such as removable disk to avoid data loss resulting from some accidents. We recommend you to store the file in
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 59
    but internally created with two independent forms. • There can be auto submit problems with web forms which do not have Submit button. All forms that you Password Bank*4 limitations: The following Windows applications cannot be supported. • Applications which do not use standard Windows controls and
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 60
    *.*], and select [Remove]. E Select [Remove all Protector Suite *.* data], and click [Next]. • Uninstallation starts. Follow the on-screen instructions. F When the "Protector Suite *.* has been successfully uninstalled." Message appears, click [Finish]. • If the confirmation message appears, click
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 61
    If the specific solutions for your problem in Fingerprint Reader (Î page 110) do not work, you can use these instructions as the last measure and reboot and try again. If it still does not work, please contact Panasonic Technical Support. E Restore or create passport. • If you have a backup of
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 62
    Modem 62 Connecting the Internal Modem with a Telephone Jack CAUTION Use a surge protector since the modem may be damaged by a sudden high voltage surge that
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 63
    waiting for a phone call, and if you prefer, to turn the computer to sleep*2 again afterward. For further information, refer to the instruction manual of the software application. „ To enable this function 1 Click (Start) - [All Programs] - [Windows Fax and Scan]. 2 Click [Tools] - [Fax Settings
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 64
    Modem 64 „ To set the time to return the computer to sleep*2 The computer will enter sleep*2 after the set time even when the communication is not completed. You can avoid such uncompleted communication if you select [Never], but the computer does not return to sleep*2 after resuming by a phone
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 65
    LAN 65 Connecting LAN CAUTION z Do not connect the telephone cable to the LAN port. 1 Turn off the computer. z Do not use sleep*1 or hibernation. 2 Open the cover (A) and connect the cable. Connect the LAN port (B) and the network system (server, HUB, etc.) using a LAN cable. 3 Turn on the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 66
    LAN 66 Enabling the Power On by LAN function The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN port. 1 Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility (Î page 82). 2 In [Caution], press Enter.
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 67
    LAN 67 Enabling/Disabling the Wake Up from wired LAN function When the Wake Up from wired LAN function is enabled, the computer automatically resumes from sleep*2 or hibernation when the computer is accessed from the network server via the internal LAN port. (Default setting) The Wake Up from
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 68
    For further information about Wireless WAN: Refer to the instruction manual of the wireless device. The wireless communication can be enabled turn off wireless communication after switching the wireless switch off. If the IEEE802.11a setting is
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 69
    Disabling/Enabling Wireless Communication 69 Wireless Switch Utility This utility allows you to control the function of the wireless switch. This utility also allows you to enable or disable wireless devices from a pop-up menu. In the default setting, all wireless devices are enabled. „ The
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 70
    programs and files], and press Enter. Click [start] - [Run] and input "c:\util\wdisable\setup.exe", and click [OK]. 3 Follow the on-screen instructions to install the Wireless Connection Disable Utility. Checking the status of the wireless connection NOTE z The Wireless Switch Utility should also be
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 71
    Disabling/Enabling Wireless Communication 71 : Indicates one of the following statuses; • the utility does not monitor the LAN port status, • the Wireless Switch Utility has not been started, or • LAN is disabled in the [Advanced] menu of the Setup Utility or in the device manager. „ Menu Right-
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 72
    Wireless LAN 72 CAUTION z Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect devices. Follow the instructions of airline companies and hospitals. If you use the computer in these locations, turn off the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 73
    on. • If you cannot select [Turn wireless on], the wireless switch is turned off. Setting the wireless LAN access point Preparation Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer. 1 Turn the wireless LAN on. 2 Click
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 74
    Wireless LAN 74 Setting the profiles 1 Double-click / / on the notification area. The [Intel® PROSet/Wireless WiFi Connection Utility] screen appears. z When or is displayed, skip step 2. 2 When you double-clicked in step 1, slide the wireless switch to turn on. 3 Click [Profiles] and click
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 75
    75 Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a) 1 Click on the notification area and click or . 2 Click [802.11a Enabled] or [802.11a Disabled]. NOTE In some countries, communication using IEEE802.11a (5 GHz wireless LAN
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 76
    Wireless LAN 76 To check the Wireless LAN network status 1 Click on the notification area and place the cursor over the Wireless Switch Utility icon ( or ). A tooltip appears. NOTE z The Wireless Switch Utility icons ( and ) indicate the on/off status of wireless communication, not the IEEE802.11a
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 77
    Bluetooth 77 You can access internet and other Bluetooth devices without connecting cables Wireless Switch Utility icon ( or ). A tooltip appears. „ To access the online manual 1 Click (Start)*1 - [All Programs] - [Bluetooth] - [User's Guide]. *1 Windows XP: [start]
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 78
    Hard Disk Drive 78 Inserting/Removing the Hard Disk Drive To change your hard disk drive, contact Panasonic Technical Support. CAUTION z Back up all the important data before removing the hard disk drive. z If you need to read the hard disk data on another computer
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 79
    . • In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override]. • F9 (Setup Defaults) does not function. NOTE z The [Panasonic] boot screen may not appear when only the external display is being used. In this case, as soon as the computer starts up, press F2
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 80
    Setup Utility 80 Information Menu Language Underlined items are the factory presets. English Japanese Product Information Model No. Serial No. Computer information (cannot be changed.) System Information Processor Type Processor Speed Memory Size Available Memory*1 Hard Disk Computer
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 81
    the 10-key area works as a number pad when the Fn key is held. Display • The display during the Windows start-up process. When an external [External Monitor] is Internal LCD selected. Simultaneous External Monitor Internal LCD Environment
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 82
    Enabled Core Multi-Processing Disabled Enabled Intel(R) Virtualization Technology Disabled Enabled Intel(R) Trusted Execution Technology • Only for model that supports Intel(R) AMT Disabled Enabled Peripheral Configuration HDD Controller Setting • Do not change this setting. Optical Drive
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 83
    Setup Utility Bluetooth • Only for model with Bluetooth Modem • Only for model with Modem ExpressCard Slot • Only for model with ExpressCard Slot PC Card Slot SD Slot IEEE1394 Port Smart Card • Only for model with Smart Card USB Port Legacy USB Support 83 Disabled Enabled Disabled Enabled Disabled
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 84
    [Boot Option] operates. Hard Disk CD/DVD Drive LAN USB Floppy Disk*2 USB Hard Disk USB CD/DVD Drive Disabled *2 The operation is confirmed by Panasonic USB floppy disk drive (optional
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 85
    "Press F2 for Setup / F12 for LAN" Enabled is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message is not XEmbedded Security(TPM) • Only for model that supports TPM • For information on TPM, refer to the Installation Manual of "Trusted Platform Module (TPM
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 86
    Setup Utility Exit Menu Save Values and Reboot Reboot Without Saving Changes Save Options Save Current Values Load Previous Values Load Default Values Boot Override (Device Information) XDiagnostic Utility 86 To reboot the system after saving the changes. To reboot the system without saving the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 87
    Express. Some characters of website and e-mail may not be enlarged. Preparation Close all of the applications before using "Icon Enlarger". 1 Click [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. 2 Select the size. 3 Click [OK]. The screen will be displayed in the selected size.
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 88
    Loupe Utility 88 You can magnify the specific part of the screen. Activating the Loupe Utility 1 Click (Start)*1 - [All Programs] - [Panasonic] - [Loupe Utility]. 2 Click [OK]. z appears on the notification area. If does not appear on the area, click . *1 Windows XP: [start] Using the Loupe
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 89
    Loupe Utility 89 Setting the Loupe Utility 1 Click on the notification area and right-click . 2 Click [Settings]. [Show/hide shortcuts assignment] z When using the external mouse/touch pad A Click [Mouse / Touch pad] B Click a combination of Alt, Ctrl, and Shift, and add the check mark. (Mul-
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 90
    not there is a problem. If the utility discovers a problem in the hardware, contact Panasonic Technical Support. Software cannot be if mute is using Windows.) *2 Only for model with wireless LAN *3 Only for model with wireless WAN *4 Only for model with Bluetooth. When the wireless switch is not
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 91
    diagnostic check, do not remove the AC adaptor, or attach any peripheral devices. 2 Turn on or restart the computer, and press F2 or Del while [Panasonic] boot screen is dis- played. The Setup Utility starts up. z If the password is requested, enter the Supervisor Password. z If you are using the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 92
    Hardware Diagnostics 92 5 While [Panasonic] boot screen is displayed, press and hold Ctrl + F7 until " a long period of time. Wait until the process is complete. • Green: No problems discovered • Red: Problems discovered NOTE z Using the following procedure, you can run a diagnostic check on a
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 93
    and the message "Check Result TEST FAILED" is displayed, you can assume that there is a problem with the computer's hardware. Confirm which hardware component is displayed as red, and contact Panasonic Technical Support. If the display is green and the message "Check Result TEST PASSED" is displayed
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 94
    data, which can be used to recover from hardware failure. Panasonic Corporation will bear no responsibility for any damage suffered (including loss C Select a location for backup and click [next]. Follow the on-screen instructions. NOTE z Connect the AC adaptor and do not remove it until backup is
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 95
    been backed up, and then click [Retry]. 9 Click [Next]. Follow the on-screen instructions. „ Start up System Recovery Options z To perform from [Advanced Boot Options] A Turn on the computer, and when [Panasonic] boot screen disappears, press and hold F8. z If [Enter Password] is displayed during
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 96
    , select [Yes] and press Enter. • The computer will restart. E Press F2 or Del while [Panasonic] boot screen is displayed. • The Setup Utility starts up. • If the password is requested, enter not specify keyboard layouts other than the one already selected. K Follow the on-screen instructions.
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 97
    the computer and insert the CD/DVD drive into the multimedia pocket (Î page 21). 2 Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed. The Setup Utility starts up. z If the password is requested, enter the Supervisor Password. 3 Press F9. At the confirmation message
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 98
    , press Enter. The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted] message will appear. If a problem has occurred during the operation, an error message will appear. z To cancel partway, press Ctrl + C. The data erasure will be up to that point
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 99
    . Note that this service is only available in certain regions. http://www.absolute.com NOTE z Consult Absolute Software Corp. before disposal. About Windows-related files The Windows files included in the Windows DVD-ROM are contained in the following folders: c:\windows\support\migwiz, c:\windows
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 100
    Error Message 100 Follow the instructions below when an error message appears. If the problem persists or if the error message is not shown here, contact Panasonic Technical Support. Error Message Solution Bad System CMOS System CMOS Checksum Error An error has occurred in the memory of system
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 101
    Troubleshooting (Advanced) 101 Refer to the following instructions when a problem occurs. If the remedies indicated in the chart do not solve the problem, contact Panasonic Technical Support. For a software problem, refer to the instruction manual of the software. • To check the computer's usage
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 102
    Troubleshooting (Advanced) 102 „ Sleep*1 and Hibernation The computer does not resume. *1 Windows XP: standby „ Sound z If you press and hold the power switch for 4 seconds or
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 103
    Troubleshooting (Advanced) 103 „ Disc Operation The CD/DVD drive does not DVD drive vibrates excessively or makes noise. Cannot eject a disc. The disc tray does not close. Other disc operation problems. z Set [Optical Drive] to [Enabled] in the [Advanced] menu of the Setup Utility (Î page 82).
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 104
    Troubleshooting (Advanced) 104 Network Cannot connect to a network. Cannot check the computer's MAC "Local Area Connection". D Input "exit", and press Enter. Wireless Communication (only for model with wireless LAN/Bluetooth/wireless WAN) Cannot connect to a network. Slide the wireless switch
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 105
    Troubleshooting (Advanced) 105 „ Wireless Communication (only for model with wireless LAN/Bluetooth/wireless WAN) Access point is not detected. z Shorten the distance between the computer and the access point, and try the detection
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 106
    Troubleshooting , remove and insert the device. If the problem persists, restart the computer. z When you page 81). z The operation is confirmed by Panasonic CF-VFDU03U USB floppy disk drive (optional). z ports. z Set [USB Port] and [Legacy USB Support] to [Enabled] in the [Advanced] menu of the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 107
    Troubleshooting (Advanced) 107 „ Connecting Peripherals The RAM module is not View] - [Resources by type]. z Check the connection. z The device driver may not work. Refer to the instruction manual of the device. z Do not connect 2 mouse devices simultaneously. z Set [Touch Pad] to [Disabled] in
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 108
    steps below. A Click [Start] - [Run] and input "c:\util\cpupower\setup.exe", and click [OK]. Follow the on-screen instructions. B Click [Start] - [All Programs] - [Panasonic] - [CPU Idle Setting]. C Click [Performance] and click [OK], then click [Yes]. The computer is restarted automatically. z If
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 109
    Troubleshooting page 83). z The port settings are not correct. z Read the instruction manual of the card or contact the manufacturer of the card. z Remove This computer may not support the maximum speed some types of SD/SDHC Memory Cards guarantee. „ Smart Card (only for model with Smart Card slot)
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 110
    Troubleshooting (Advanced) 110 „ Fingerprint Reader (only for model the steps described above have been performed. Contact Panasonic Technical Support. Sensor does not work. z Exported passport Replace/Repair the sensor, then follow the instructions in section "Replacing sensor." (Î page 112
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 111
    Troubleshooting (Advanced) 111 „ Fingerprint Reader (only for model with Fingerprint Reader) User cannot use enrolled finger. (e.g. injury) z It is strongly recommended to enroll at least two fingers to avoid this problem. If you enrolled multiple fingers, simply use other finger. If you only
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 112
    Troubleshooting (Advanced) 112 „ Fingerprint Reader (only for model with Fingerprint Reader) Replacing sensor. Protector Suite , "Protector Suite" has not stored any data on the device and therefore has no problem to continue after you replaced the sensor. However, in case you use the Power-on
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 113
    Troubleshooting (Advanced) 113 „ Fingerprint Reader (only for model with Fingerprint Reader) Removing data from the reader. "Lift Finger" is displayed during operation. z When enrollment to the device is used, passport data is stored
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 114
    Troubleshooting (Advanced) 114 Checking the Computer's Usage Status You can check the computer's usage status in the PC Information Viewer. You may need this information when calling Panasonic Technical Support for advice. NOTE z This computer periodically records the management information of the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 115
    Troubleshooting (Advanced) 115 „ To save a copy of the screen as an image file the following procedure. A Log on to Windows as an administrator. B Click (Start)*7 - [All Programs] - [Panasonic] - [PC Information Viewer]. C Right-click [Screen Copy] and click [Properties] - [Shortcut]. D Move the
  • Panasonic CF-52ELNBD2M | Reference Manual - Page 116
    -2010 z Disclaimer Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. z Trademarks • Microsoft, Windows, and the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
1
Reference Manual
Personal Computer
Model No.
CF-52 Series
We recommend that this Reference Manual be printed.
Descriptions
•
For common procedures and screens for Windows 7 and
Windows XP, this Reference Manual uses the procedures
and screens of Windows 7.
•
Some menus may differ for Windows XP.
•
Windows XP does not require clicking operation to
of
the notification area.