Panasonic PT-EX500U Operating Instructions Advanced
Panasonic PT-EX500U Manual
 |
View all Panasonic PT-EX500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PT-EX500U manual content summary:
- Panasonic PT-EX500U | Operating Instructions Advanced - Page 1
Operating Instructions Functional Manual LCD Projector Commercial Use Model No. PT-EZ570E PT-EZ570EL PT-EW630E PT-EW630EL PT-EW530E PT-EW530EL PT-EX600E PT-EX600EL PT-EX500E PT-EX500EL Thank you for purchasing this Panasonic Product. JJ Before operating this product, please read - Panasonic PT-EX500U | Operating Instructions Advanced - Page 2
LAMP BEFORE OPENING THE LAMP COVER. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Product - Panasonic PT-EX500U | Operating Instructions Advanced - Page 3
you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorised Service Center. If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut - Panasonic PT-EX500U | Operating Instructions Advanced - Page 4
accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions objects on top of it or wrap it into a bundle. Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary - Panasonic PT-EX500U | Operating Instructions Advanced - Page 5
and repair work, please contact an Authorized Service Center. Do not project an image with the lens cover attached. Doing so can cause fire. Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow the projector to get wet. Doing so may cause - Panasonic PT-EX500U | Operating Instructions Advanced - Page 6
LR03 type) and the lens antitheft screw. zz The battery and the lens antitheft screw can cause the lamp unit. If the lamp breaks, it could cause injury. Lamp replacement The lamp has high than this projector. zz Using the supplied power cord with devices other than this projector may cause - Panasonic PT-EX500U | Operating Instructions Advanced - Page 7
advice immediately. zz Ask your dealer about replacing the lamp unit and check the inside of the projector. Do not attach wet air filter. Doing so may thoroughly before attaching to the projector. To remove the battery Remote Control Battery 1. Press the guide and lift the cover. 2. Remove the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 8
or registered trademarks of their respective holders. Please note that the operating instructions do not include the ® and TM symbols. Illustrations in these operating instructions •• Note that illustrations of the projector and screens may differ from the ones you actually see. Page references - Panasonic PT-EX500U | Operating Instructions Advanced - Page 9
The inclusion of an HDMI terminal provides support for high quality video and HDMI audio. Useful Functions for Presentations The digital zoom function allows you to focus on the crucial information during a presentation. Shutter Function* The projector is equipped with the shutter that provides - Panasonic PT-EX500U | Operating Instructions Advanced - Page 10
projection lens 25 Screen size and throw distance 26 Adjusting front adjustable feet 33 Connections 34 Before connecting to the projector 34 1 49 Input 2 49 Input 3 49 AUTO PC adjust 51 Auto PC adj 51 Manual PC adjust 52 Fine sync 52 Total dots 52 Position H 52 Position V 52 Current - Panasonic PT-EX500U | Operating Instructions Advanced - Page 11
Picture 64 HDMI setup 65 DVI signal level 65 Lamp power 65 Fan control 65 Simple mode 66 Remote Input Source Information Display 71 Network 72 Projector name 72 Network setup 72 Network Maintenance 93 Replacing the unit 95 Troubleshooting 98 Appendix Technical Information 100 PJLink - Panasonic PT-EX500U | Operating Instructions Advanced - Page 12
zzDo not hold the lens and the peripheral part. Cautions when installing JJDo not set up the projector outdoors. zz The projector is designed for indoor (studio lamps, etc.) where temperature changes greatly (Operating environment Æpage 115): Doing so may shorten the life of the lamp or result - Panasonic PT-EX500U | Operating Instructions Advanced - Page 13
or ventilating installation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector. zz Do not use the projector tilted at an angle that exceeds ± 10 degrees vertically. +10° -10° zz In upward and downward projection, do not - Panasonic PT-EX500U | Operating Instructions Advanced - Page 14
instruction (Æpages 68, 86) zz Make your password as difficult to guess as possible. zz Change your password periodically. zz Panasonic projector in an environment with high temperature or heavy exposure to dust or tobacco smoke will reduce the service life of the optical components, such as the LCD - Panasonic PT-EX500U | Operating Instructions Advanced - Page 15
. zz It is recommended to have authorized engineer or your dealer replace the lamp unit. Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany ENGLISH - 15 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 16
Only for PT-EZ570EL, PT-EW630EL, PT-EW530EL, PT-EX600EL and PT-EX500EL. ***** Be careful in the opening of projector when mounting the lens antitheft screw. It may cause such as electric shock, heavy exposure to dust, deviation adjustment. Please contact an Authorized Service Center for mounting - Panasonic PT-EX500U | Operating Instructions Advanced - Page 17
the supplied CD-ROM. Instructions/List (PDF) Operating Instructions - Functional Manual Operation Manual Multi Projector Monitoring & Control Software 2.6 Operation Manual Logo Transfer Software 2.0 List of compatible projector models •• This is a list of projectors that are compatible with - Panasonic PT-EX500U | Operating Instructions Advanced - Page 18
function. (Æpage 42) (7)Signal Emission indicator Light red while a signal is being sent from the remote control to the projector. (8) button Turn the projector off. (Æpage 39) (9) button Select an input source. (Æpage 41) (10) button Automatically adjust the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 19
(17) button Correct keystone distortion. (Æpage 44) (18) button Select the Lens Shift function. (Æpage 43) (19) button Zoom in and remote control may not operate correctly. zzYou can operate the projector by reflecting the remote control signal on the screen. The - Panasonic PT-EX500U | Operating Instructions Advanced - Page 20
Projector body (1) (2) (3) (4) (9) (11) (12) (13) (14) Preparation (15) (10) (5) (6) (7) (8) (9) (1) Lens Release Button (2) Indicators (Æpage 21) (3) Ambient Luminance sensor (Æpage 56) (4) Lamp cover (Æpage 97) The lamp unit is located inside. (5) Speaker (6) Projection Lens (for PT - Panasonic PT-EX500U | Operating Instructions Advanced - Page 21
input source. (7) button Enter the focus, zoom, and lens shift adjustment mode. (Æpage 40) (8) indicator zzLight red while the projector is in stand- when in AV MUTE mode. (12) indicator Light orange when the projection lamp reaches its end of life. ENGLISH - 21 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 22
to the L jack. (14) variable audio out This jack outputs the audio signal to external audio equipment. (15) serial in When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable. (16) Security slot This slot is for a Kensington lock - Panasonic PT-EX500U | Operating Instructions Advanced - Page 23
zzRemove the batteries in the reverse order of installation. Setting Remote control ID numbers When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector individually using single remote control, if unique ID number is assigned to each - Panasonic PT-EX500U | Operating Instructions Advanced - Page 24
ET-PKE200B. zzUse only the ceiling mount brackets specified for this projector. zzRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector. Attention zzTo ensure projector performance and security, installation of the ceiling mount bracket must be - Panasonic PT-EX500U | Operating Instructions Advanced - Page 25
following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. JJRemoving the lens 1. Press and hold the button or button for more than 5 seconds to make the lens return to the central position. 2. Turn off the projector and - Panasonic PT-EX500U | Operating Instructions Advanced - Page 26
up Screen size and throw distance Place the projector referring to the diagram on the right and 40" 0.538 0.862 50" 0.673 1.077 The standard zoom lens Fixed-focus Lens The lens of optional accessories Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens - - 1.7 ~ 2.8:1 Min. (LW) 1.36 1.71 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 27
Setting up zzFor the screen aspect ratio of 16:9 (Unit: m) Lens type The standard zoom lens Fixed-focus Lens The lens of optional accessories Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens Model number of projection lens Throw ratio*1 Screen dimensions Screen Height Width size (SH) (SW - Panasonic PT-EX500U | Operating Instructions Advanced - Page 28
Width size (SH) (SW) 40" 0.538 0.862 50" 0.673 1.077 60" 0.808 1.292 The standard zoom lens Fixed-focus Lens The lens of optional accessories Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens - - 1.7 ~ 2.8:1 Min. (LW) 1.39 1.75 2.11 Max. (LT) 2.40 3.02 3.63 ET-ELW21 ET-ELW20 ET-ELT20 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 29
4.064 250" 3.810 5.080 300" 4.572 6.096 350" 5.334 7.112 400" 6.096 8.128 The standard zoom lens The lens of optional accessories Fixedfocus Lens Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens - - - ET-ELW21 ET-ELW20 ET-ELT20 2.0 ~ 3.4:1 Min. (LW) 1.58 1.99 2.39 2.80 3.21 3.62 4.03 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 30
dimensions Screen Height Width size (SH) (SW) 40" 0.610 0.813 50" 0.762 1.016 The standard zoom lens The lens of optional accessories Fixedfocus Lens Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens - - - ET-ELW21 ET-ELW20 ET-ELT20 1.7 ~ 2.8:1 Min. (LW) 1.30 1.64 Max. (LT) 2.26 2.83 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 31
up If the projector is used with a screen size not listed in this manual, check the diagonal dimension (m) of your screen and calculation the projection distance using the following formula. JJCalculation formulas for projection distance by lens types (for EZ570 series) Lens type The standard - Panasonic PT-EX500U | Operating Instructions Advanced - Page 32
(L) formula Min. (LW) L= 0.141732 x SD(m) - 0.050400 Max. (LT) L= 0.241339 x SD(m) - 0.049700 The standard zoom lens Fixed-focus Lens ET-ELW21 Short Zoom Lens ET-ELW20 Long Zoom Lens ET-ELT20 Ultra Long Zoom Lens ET-ELT21 16:9 4:3 16:10 16:9 4:3 16:10 16:9 4:3 16:10 16:9 4:3 16:10 16 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 33
vertically.) Adjustable feet Adjustable range Front adjustable feet : 30 mm (1.181") Attention zzHeated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust the front adjustable feet. zzIf keystone distortion occurs on the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 34
Bas Connections Before connecting to the projector zzRead carefully the instruction manual for the device to be in problems such as the image cutting out or not appearing. When connecting the 1 080p signal using HDMI, use a cable compliant with 1 080p signal. zz This projector does not support the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 35
base to prevent it from coming off. JJPower cord holder A power cord holder is designed to prevent the AC power cord from coming off the projector. Please insert the power cord into the power cord holder correctly as Picture (1) shown: AC Power cord holder Clamp Picture (1) JJAttaching Attach the AC - Panasonic PT-EX500U | Operating Instructions Advanced - Page 36
cannot be turned on until cooling is completed and the indicator stops blinking. Projecting. The projector is in stand-by status with [Power management] function. The projection lamp will be turned on if the input signal is reconnected or any button on the control panel or remote - Panasonic PT-EX500U | Operating Instructions Advanced - Page 37
the countdown, the input source that was selected the last time and the lamp power status icon appear on the screen. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page. Note zzWhen the [Logo select] function is set - Panasonic PT-EX500U | Operating Instructions Advanced - Page 38
18). When you complete entering a four-digit number, the pointer moves to "Set". Press the button so that you can start to operate the projector. If you fix an incorrect number, use the ◄ button to move the pointer to the number you want to correct, and then enter the correct - Panasonic PT-EX500U | Operating Instructions Advanced - Page 39
even during projection without pressing the < > button. Note zzWhen using the Direct Power Off function, you cannot restart the projector immediately after the power is disconnected. The lamp remains high temperature and needs to be cooled, so it sometimes takes longer time than usual for the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 40
the arrows pointing up, down, left and right turn red. This position is the center for the lens. zzAt positions of maximum shift, the arrows disappear. zzThe projector stores the setting made using the lens shift function when the power is turned off. zzWhen the position of the image is shifted, the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 41
Basic operations by using the remote control Note zzWhen use the button to release the [AV mute] function, the mute function cannot be operated at the same time. Switching the input signal You can switch the input signals to project. buttons Basic Operation Using the SHUTTER/ AV MUTE button - Panasonic PT-EX500U | Operating Instructions Advanced - Page 42
. Note zzFor details, see "Auto PC adjust" of Main menu. (Æpage 51) Controlling the volume of the speaker You can control the volume of the projector's speaker or audio output. buttons Press the (-/+) buttons on the side control or on the remote control to adjust the volume. The volume dialog - Panasonic PT-EX500U | Operating Instructions Advanced - Page 43
button This function allows you to position the screen to the desired point without having picture distortion. button Press button on the remote control to display [Lens shift] on the screen. Note zzFor details, please refer to "Adjusting the image". (Æpage 40) zzPress and hold the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 44
Basic Operation Basic operations by using the remote control Using the KEYSTONE button This function allows you to correct keystone distortion. button JJFor EW530 series and EX500 series. Press the button on the remote control. The Keystone dialog box appears. Press ▲▼ to correct - Panasonic PT-EX500U | Operating Instructions Advanced - Page 45
Basic operations by using the remote control Using the ZOOM +/- buttons Adjusts the zoom of the lens. Using the INFO button This function allows you to display the information menu. buttons Press buttons on the remote control. Note zzFor details, please - Panasonic PT-EX500U | Operating Instructions Advanced - Page 46
Navigation Navigating through the menu JJOperating procedure For example: PT-EZ570E 1111 Press the button. The Main Note zzSome items may not be adjusted or used for certain signal formats input to the projector. The MENU items that cannot be adjusted or used are shown in gray characters, and - Panasonic PT-EX500U | Operating Instructions Advanced - Page 47
54 54 54 54 54 ***** When input video signal to the projector, these functions will be available. JJImage adjust [ ] Sub-menu item 56 56 56 57 57 57 57 57 57 ***** When input video signal to the projector, these functions will be available. ***** EZ570 series, EW630 series and EX600 series Only. - Panasonic PT-EX500U | Operating Instructions Advanced - Page 48
power Lamp runtime Filter counter Power management Key lock PIN code lock Shutter management Simple mode Remote control Serial number Factory default - Page 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 JJNetwork [ ] Sub-menu item Projector name Network setup Network control Network status - Panasonic PT-EX500U | Operating Instructions Advanced - Page 49
adjustment is required. - - - - There is no signal input from the computer. Check the connection between your computer and the projector. Mode 1 The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10. Input 2 1111 Press ▲▼ to select [Input - Panasonic PT-EX500U | Operating Instructions Advanced - Page 50
automatically detects an incoming video signal, and adjusts itself to optimize its performance. Y, Pb/Cb, Pr/Cr SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format among [480i], [576i], [480p], [576p], [720p], [1 035i] [1 080i] and - Panasonic PT-EX500U | Operating Instructions Advanced - Page 51
adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just function. When the image is not provided properly with this operation, manual adjustments are required (Æpages 52-53). zz The Auto PC adjustment cannot - Panasonic PT-EX500U | Operating Instructions Advanced - Page 52
PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. Fine sync 1111 Press ▲▼ to select [Fine sync]. 2222 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 53
Manual PC adjust Current mode 1111 Press ▲▼ to select [Current mode]. 2222 Press button to display the adjustment dialog box. 3333 Press ◄► to adjust the horizontal area displayed by this projector. Store 1111 Press ▲▼ to select [Store]. 2222 Press ► or the button to enter the next - Panasonic PT-EX500U | Operating Instructions Advanced - Page 54
through the menu" on page 46), then select the item from the sub-menu. Remote Control Side Control Natural Natural picture level preset on the projector. Press ▲▼ to select [Natural] and then press the button. Image 1-10 For viewing with the user preset image mode in the Image adjust - Panasonic PT-EX500U | Operating Instructions Advanced - Page 55
the Maximum intensity of the color value 63 decrease the Minimum intensity of the color value 0 Note zzWhen input video signal to the projector, [Color] will be available. Tint 1111 Press ▲▼ to select [Tint]. 2222 Press the button to display the adjustment dialog box. 3333 Press - Panasonic PT-EX500U | Operating Instructions Advanced - Page 56
value 63 Minimum value 0 Daylight View This function uses an ambient light sensor to detect the room's light intensity and adjust the projector output automatically to ensure a bright presentation. 1111 Press ▲▼ to select [Daylight View]. 2222 Press the button to display the adjustment - Panasonic PT-EX500U | Operating Instructions Advanced - Page 57
576p], [720p] or [1 080p] is selected. Off On Film Disabled The function works For watching a film Note zzWhen input video signal to the projector, [Progressive] will become available. Reset To reset the adjusted data, all adjustments will return to their previous figures. 1111 Press ▲▼ to select - Panasonic PT-EX500U | Operating Instructions Advanced - Page 58
then press the button. True Provide the image in its original size. When the original image size is larger than the panel size*, the projector enters to the panning mode automatically. 1111 Press ▲▼ to select [True] and then press the button. 2222 Press to pan the image. zzWhen - Panasonic PT-EX500U | Operating Instructions Advanced - Page 59
Screen Custom adj. Adjust the screen scale and position manually with this function. 1111 Press ▲▼ to select [ adjust the screen size with the button. Note zzWhen input computer signal to the projector, this function will be available. zz[Digital zoom +/-] cannot be selected when [True] - Panasonic PT-EX500U | Operating Instructions Advanced - Page 60
function is used to project the image from a ceiling-mounted projector. 1111 Press ▲▼ to select [Ceiling] and then press the available for EX600 series, EX500 series. Default(16:10) 16:10 is the aspect of the LCD panel. 16:9 Set to a 16:9 projection screen. 4:3 Set to a 4:3 projection screen. - Panasonic PT-EX500U | Operating Instructions Advanced - Page 61
Sound Select [Sound] from the Main Menu (see "Navigating through the menu" on page 46), then select the item from the sub-menu. Remote Control Side Control Mute 1111 Press ▲▼ to select [Mute]. 2222 Press the button to switch the mute function between [On] and [Off]. zzPress the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 62
the button. 3333 Press ▲▼ to select the desired language. For example: PT-EZ570E zzThe language used in the On-Screen Menu is available in English, German, search works under the following situation: ● When turning on the projector by pressing the button on the remote control - Panasonic PT-EX500U | Operating Instructions Advanced - Page 63
the projector *2 Off Hide the On-Screen Displays *3 ***** Use this function when you want to project images after the lamp becomes control] ● Arrows for the [True] function in the Screen Menu. ● [Service] Background Select the background screen for when no input signal is detected. 1111 Press - Panasonic PT-EX500U | Operating Instructions Advanced - Page 64
Setting Attention zzBe sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting. Picture in Picture This function is used to project two images simultaneously by placing a separate small sub screen within or next to the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 65
Note zzFor details, refer to the operating instructions of your Digital R/G/B equipment. DVI signal lamp power output is maximum. The lamp power output is 80% of the Normal mode. The lamp less cooling effect. ***** Select [On 2] when using the projector in higher altitudes (about 2 000 m ~ 2 700 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 66
, switch the code on the remote control to fit the code on the projector. RC sensor Select a location of the infrared remote receiver of the remote control . Activate only the back receiver. Eco management Can optimize lamp power and reduce the power consumption according to the application. - Panasonic PT-EX500U | Operating Instructions Advanced - Page 67
Setting Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. 1111 Press ▲▼ to select [Power management]. 2222 Press ► or the button to - Panasonic PT-EX500U | Operating Instructions Advanced - Page 68
for a few seconds. Security This function allows you to use the [Key lock] and [PIN code lock] function to set the security for the projector operation. 1111 Press ▲▼ to select [Security]. 2222 Press ► or the button to access the submenu. JJKey lock This function locks the side control - Panasonic PT-EX500U | Operating Instructions Advanced - Page 69
's side control. zz buttons and button on the remote control. JJManagement The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 480 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 70
time is 10%. JJFilter counter timer To set a timer. When the projector reaches the selected time the filter warning icon appears on the screen. 1111 Note zzEven while the test pattern is displayed, the zoom, focus, lens shift, shutter, and power off functions take priority. Factory default This - Panasonic PT-EX500U | Operating Instructions Advanced - Page 71
menu. Remote Control Side Control JJLamp power The selected lamp mode is displayed. JJLamp runtime The cumulative lamp operating time is displayed. JJFilter counter The filter using number of the projector is displayed. The serial number is used to service the projector. Settings ENGLISH - 71 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 72
], and press button. 2222 Press ▲▼ to select an item, and change the setting according to the instructions. On: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired. DHCP Off: If a DHCP server does not (DHCP client - Panasonic PT-EX500U | Operating Instructions Advanced - Page 73
by Crestron Electronics, Inc. which collectively manage and control multiple system devices connected via the network, from a computer. This projector supports "Crestron RoomView". zzFor details of "RoomView", refer to the Crestron Electronics, Inc. website. (Provided only in English.). http - Panasonic PT-EX500U | Operating Instructions Advanced - Page 74
the projector. zzDisplay of the projector status. zzTransmission of an E-mail message when there is a problem with the projector. Note function of network function parts (1) (2) (3) Settings (1) LAN LINK/ACT lamp (yellow) L ights on when connected. Flashes when transmitting/receiving data. (2) - Panasonic PT-EX500U | Operating Instructions Advanced - Page 75
are user1 (user privileges) or admin1 (administrator privileges) for the use name and panasonic (lowercase letters) for the password. 4444 Click [OK] to display the Projector status page. zz"Projector status" page is displayed. Note zzAvoid activating two or more Web browser simultaneously to - Panasonic PT-EX500U | Operating Instructions Advanced - Page 76
. 10 Displays the intake temperature status of the projector. 11 D isplays the the around lamp temperature status of the projector. 12 Displays the optics module temperature status of the projector. 13 Displays the use time of the lamp. 14 Displays the self diagnostics information. (Æpage 77 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 77
it is now time to replace the lamp. The lamp has failed to light. Wait a short while for the lamp to cool off, and then turn on the power. Trouble has occurred in the contrast shutter circuitry. Consult your dealer. There is a problem with shutter. There is a problem with the air filter unit. The - Panasonic PT-EX500U | Operating Instructions Advanced - Page 78
series and EX600 series. *W hen it displays AV MUTE, it is only for EW530 series and EX500 series. JJDetail control page Click [Projector control], then [Advanced control] to display the Detail control page. 1 2 3 4 1 Execute Auto PC ADJ. function 2 Operations on Image adjust 3 Operations on - Panasonic PT-EX500U | Operating Instructions Advanced - Page 79
Network 5 6 7 8 9 10 5 Operations on Keystone* function 6 Operations on Lens shift 7 Operations on Zoom 8 Operations on Focus 9 Operations on Test pattern 10 Return to factory default setting *For EW530 series and EX500 series, the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 80
to complete the detailed settings as desired. Settings performed here are the same as the settings performed with the [Network] menu of the projector. 4444 Click [Submit]. zzThe settings will be registered. Note zzChanging the setting of LAN while connected with LAN might disconnect the connection - Panasonic PT-EX500U | Operating Instructions Advanced - Page 81
Network JJPing test page This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Display which appears when the connection was successful. 1 2 1 Enter the IP - Panasonic PT-EX500U | Operating Instructions Advanced - Page 82
Network JJE-mail set up page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail ] or [SIMPLE]. ERROR: An error is detected by self-diagnosis. LAMP RUNTIME: Remaining lamp service time has reached the value set in the field. INTAKE AIR TEMPERATURE: - Panasonic PT-EX500U | Operating Instructions Advanced - Page 83
10 Select the conditions for sending e-mail. MAIL CONTENTS: Select [NORMAL] or [SIMPLE]. ERROR: An error is detected by self-diagnosis. LAMP RUNTIME: Remaining lamp service time has reached the value set in the field. INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in - Panasonic PT-EX500U | Operating Instructions Advanced - Page 84
established. === Panasonic projector report(CONFIGURE) === Projector Type : PT-EZ570 Serial No check system ----MAIN CPU BUS FAN INTAKE AIR TEMPERATURE AROUND LAMP TEMPERATURE OPTICS MODULE TEMPERATURE LAMP REMAIN TIME LAMP STATUS APERTURS(CONTRAST-SHUTTER) SHUTTER AIR FILTER FILTER UNIT [ OK - Panasonic PT-EX500U | Operating Instructions Advanced - Page 85
below is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : PT-EZ570 Serial No : 000000000 ----- check system ----- MAIN CPU BUS [ OK ] FAN [ OK ] INTAKE AIR TEMPERATURE [ OK ] AROUND LAMP TEMPERATURE [ OK ] OPTICS MODULE TEMPERATURE [ OK - Panasonic PT-EX500U | Operating Instructions Advanced - Page 86
Network JJChange Password page Click [Change password]. 1 Administrator 2 User 1 2 Administrator mode User account 1 1 Account 2 3 2 Current user name input field 3 Current password input field 4 4 New user name input field 5 New password input field 5 6 New password input field (re-enter - Panasonic PT-EX500U | Operating Instructions Advanced - Page 87
Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. In this case, return to the previous AV MUTE, VOL UP Sets the volume, AV mute. When the power of the 6 projector is turned off, VOL DOWN, AV MUTE and VOL UP are not available. 7 4 Input - Panasonic PT-EX500U | Operating Instructions Advanced - Page 88
5 Power Status Displays the status of the power. 6 Source Displays the selected video input. 7 Projector Position Displays the projection method of the projector. 8 Lamp Mode Displays the lamp mode. 9 Error Status Displays the error status. 10 Exit Return the operation page. 1 Help Desk - Panasonic PT-EX500U | Operating Instructions Advanced - Page 89
About indicator status If an indicator turns on If a problem occurs within the projector, it will be notified with the temperature indicator , the filter indicator , the shutter indicator , and the lamp indicator . Check the status of the indicators and take - Panasonic PT-EX500U | Operating Instructions Advanced - Page 90
problem with internal temperature The status of the indicator is displayed with the following symbols. : Off, : On, : Flashing, : Off or On or Flashing Green/Red/ Orange Indicators Red Orange Blue Orange Status of the projector - Panasonic PT-EX500U | Operating Instructions Advanced - Page 91
Red Orange Blue Orange Status of the projector //*1 *1 *1 *1 *1 *1: The indicator will flash in approximately 0.5-second intervals. A problem has been detected within the projector. The projector will not turn back on even when pressing the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 92
// Indicators Red Orange Blue *1 *1 *2 *1 *1 *2 Orange *1 *1 Status of the projector There is a problem with opening or closing the shutter and the projector is cooling down. There is a problem with opening or closing the shutter and the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 93
35, 39) zzBe sure to observe the procedure "Turning off the projector" (Æpage 39) when performing power supply operation. Maintenance JJOuter Case Wipe dusters, follow its instruction. JJFront glass surface of the lens Wipe off the dirt and dust off the front surface of the lens with soft clean - Panasonic PT-EX500U | Operating Instructions Advanced - Page 94
power and perform [Filter counter reset] in the [Setting] menu. Attention zzAfter washing the air filter unit, dry it thoroughly before attaching to the projector. Attaching wet air filter unit may cause electric shock or malfunction. Note zzBe sure to attach the air filter unit properly. If you use - Panasonic PT-EX500U | Operating Instructions Advanced - Page 95
filter unit. zzWhen attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even in the event of the air filter unit dropping. zzDo not operate the projector with the air filter unit removed. Dust may accumulate on the optical elements - Panasonic PT-EX500U | Operating Instructions Advanced - Page 96
unit is necessary. When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and indicator lights orange. Replace the lamp with a new one promptly. Lamp runtime On screen Lamp replacement icon LAMP indicator Over 3 000 hours * Over - Panasonic PT-EX500U | Operating Instructions Advanced - Page 97
on a ceiling, do not work with your face close to the projector. zzAttach the lamp unit and the lamp cover securely. zzWhen you experience difficulty in installing the lamp, remove it and try again. If you use force to install the lamp, the connector may be damaged. 1111 Turn off the Power by - Panasonic PT-EX500U | Operating Instructions Advanced - Page 98
be at the minimum setting. 55 zzThe input source which is connected to the projector may have a - problem. zzThe [Shutter] function may be in use. 41 zzThe lens focus may not have been set correctly. 40 zzThe projector may not be at the correct distance from the screen. 26 The picture is - Panasonic PT-EX500U | Operating Instructions Advanced - Page 99
Troubleshooting Problem Cause Reference page The picture does not zzThere may be a problem with the VCR or other signal source. display correctly. zzA signal which is not compatible with the projector is being input. Picture from a computer does not appear. zzThe cable may be longer than the - Panasonic PT-EX500U | Operating Instructions Advanced - Page 100
Parameters 1st digits (1 - 5 digits) : Lamp cumulative operating time 2nd digit : 0 = Lamp off, 1 = Lamp on The followings are returned as parameters. " 11 12 13 21 22 23 24 25 31 32 33 46 47 48" The name set for [Projector name] in [Network] is returned. "Panasonic" is returned. Answer the model - Panasonic PT-EX500U | Operating Instructions Advanced - Page 101
→ "Command port set up" page 2222 There is a response from the projector. Response data Data section Blank Mode Blank Random number section Termination symbol "NTCONTROL" of above administrator rights user (Default password is "panasonic") 8-byte random number obtained in Step 2 zzCommand - Panasonic PT-EX500U | Operating Instructions Advanced - Page 102
Port No. : Acquire from the WEB control "Detailed set up" → "Command port set up" page 2222 There is a response from the projector. Response data Data section "NTCONTROL" (ASCII string) Blank ' ' 0x20 Mode '0' 0x30 Termination symbol (CR) 0x0d 9 bytes 1 byte 1 byte 1 byte Mode : 0 = Non - Panasonic PT-EX500U | Operating Instructions Advanced - Page 103
Technical Information Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. JJConnection Connecting terminals on - Panasonic PT-EX500U | Operating Instructions Advanced - Page 104
Technical Information JJBasic format Transmission from the computer begins with STX, then the command, parameter, and ETX are sent in this order. Add parameters according to the details of control. STX C1 C2 C3 : P1 P2 Pn ETX Start (1 byte) 3 command characters (3 bytes) Colon (1 byte) - Panasonic PT-EX500U | Operating Instructions Advanced - Page 105
following commands are available: [Projector control command] Command PON POF IIS OSH OFZ AUU AUD DZU DZD QPW Q$S Control contents Power [ON] Power [OFF] INPUT selection AV mute function Freeze Volume up Volume down D. ZOOM up D. ZOOM down Power query Lamp condition query Remarks (Parameter) PC1 - Panasonic PT-EX500U | Operating Instructions Advanced - Page 106
Technical Information Other terminals JJPin assignments and signal names of terminal Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal JJPin assignments and signal names of terminal Outside view Pin No. Signal names - Panasonic PT-EX500U | Operating Instructions Advanced - Page 107
Technical Information JJPin assignments and signal names of terminal Outside view Pin No. 1 2 3 6 7 9 10 11 14 Pin No. Signal names T.M.D.S. Data2- 15 Ground (for +5V) T.M.D.S. Data2+ 16 Hot Plug Detect T.M.D.S. Data2 Shield 17 T.M.D.S. Data0- DDC Clock 18 T.M.D.S. Data0+ - Panasonic PT-EX500U | Operating Instructions Advanced - Page 108
Technical Information List of Picture in Picture Sub Window INPUT 1 INPUT 2 INPUT 3 Main Window RGB(PC analog) RGB(Scart) DVI-D DVID(HDCP) HDMI Video Y, Pb/Cb, Pr/Cr RGB Video Y, Pb/Cb, Pr/Cr S-video RGB(PC analog) RGB(Scart) INPUT 1 DVI-D DVI-D(HDCP) HDMI INPUT 2 Video Y, Pb/Cb, - Panasonic PT-EX500U | Operating Instructions Advanced - Page 109
Technical Information List of compatible signals The following table specifies the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YPBPR, H = HDMI, D = DVI-D Mode Display resolution *1 (dots) Scanning frequency Picture quality *2 Dot clock - Panasonic PT-EX500U | Operating Instructions Advanced - Page 110
Technical Information Mode SVGA XGA SXGA WXGA Display resolution *1 (dots) Scanning frequency Picture quality *2 Dot clock H (kHz) V (Hz) frequency (MHz) EW630 series EX600 series EW530 series EX500 series EZ570 series PnP*3 Format 38.000 60.510 40.128 A A 38.600 60.310 38.600 A A - Panasonic PT-EX500U | Operating Instructions Advanced - Page 111
Technical Information Mode Display resolution *1 (dots) Scanning frequency Picture quality *2 Dot clock H (kHz) V (Hz) frequency (MHz) EW630 series EX600 series EW530 series EX500 series EZ570 series PnP*3 Format 49.600 60.050 79.360 AA A A 41.200 50.000 68.557 AA A A 49.702 59. - Panasonic PT-EX500U | Operating Instructions Advanced - Page 112
Technical Information Mode Display resolution *1 (dots) Scanning frequency Picture quality *2 Dot clock H (kHz) V (Hz) frequency (MHz) EW630 series EX600 series EW530 series EX500 series EZ570 series PnP*3 Format D-VGA 640 x 480 31.470 59.940 25.175 A A A ○ D-XGA 1 024 x 768 43. - Panasonic PT-EX500U | Operating Instructions Advanced - Page 113
processing circuit. B: Some loss of data occurs to make projection easier. ***** Where marked "○" signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play is - Panasonic PT-EX500U | Operating Instructions Advanced - Page 114
LCD panels (RGB) Active matrix method Pixels 1 024 000 (1 280 x 800) x 3 panels 786 432 (1 024 x 768) x 3 panels 2 304 000 (1 920 x 1 200) x 3 panels Lens*1 Motorised zoom: 1.6~2.8:1 Motorised focus: F 1.7 to 2.3, f 26.9 mm to 45.4 mm Luminous lamp 330 W UHM lamp which with lens. ***** - Panasonic PT-EX500U | Operating Instructions Advanced - Page 115
that without the projection lens. ***** The depth is for the projector that with the standard projection lens. ***** This is an average value. It may differ depending on individual product. It is only for PT-EW530EL, PT-EW630EL, PT-EX500EL, PT-EX600EL and PT-EZ570EL. ***** This is an average - Panasonic PT-EX500U | Operating Instructions Advanced - Page 116
zzThe dimension is for the projector with a standard lens. zzThe dimension of the lens center is when the lens shift to the center position. screwdriver or an impact screwdriver. zzFor details, see the work instruction manual packed together with the ceiling mount bracket. zzThe model Nos. of - Panasonic PT-EX500U | Operating Instructions Advanced - Page 117
Lamp unit 96 Language 62 List of compatible signals 109 List of Picture in Picture 108 Logo 63 M Main menu 47 Maintenance 93 Manual attaching the projection lens 25 Replacing the Lamp unit 97 Replacing the Troubleshooting 98 True 58 Turning Off the Projector 39 Turning On the Projector - Panasonic PT-EX500U | Operating Instructions Advanced - Page 118
products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may for the chemical involved. Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2012 M0412HZ1052 -ST
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
 |
 |
Operating Instructions
Functional Manual
LCD Projector
Commercial Use
Model No.
PT-EZ570E
PT-EZ570EL
PT-EW630E
PT-EW630EL
PT-EW530E
PT-EW530EL
PT-EX600E
PT-EX600EL
PT-EX500E
PT-EX500EL
ENGLISH
LV4A
Thank you for purchasing this Panasonic Product.
Before operating this product, please read the instructions carefully, and save this manual for future use.
J
Before using your projector, be sure to read “Read this first!” (
J
Æ
pages 2 to 8).
The information of these instructions are shared use with multiple models of EZ570 series, EW630 series,
EW530 series, EX600 series and EX500 series.
Lens is optional for the projectors that “L” follows in model number.
J