Panasonic PTLB2U User Manual
Panasonic PTLB2U Manual
 |
View all Panasonic PTLB2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PTLB2U manual content summary:
- Panasonic PTLB2U | User Manual - Page 1
Operating Instructions Basic Manual LCD Projector Commercial Use Model No. PT-LB2U PT-LB1U AUTO SETUP MENU RETURN FREEZE ENTER AV MUTE COMPUTER VIDEO DEFAULT FUNCTION INDEX- WIN. DIGITAL ZOOM VOLUME Thank you for purchasing a Panasonic Projector. „„ Before operating this product, please - Panasonic PTLB2U | User Manual - Page 2
projectors. Keep this booklet with your Panasonic LCD projector for future reference. The serial number of your product may be found on its bottom. Write it in the space provided below and retain this booklet in case service is required. Model number: PT-LB2U/PT (servicing) instructions in - Panasonic PTLB2U | User Manual - Page 3
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is of Conformity Model Number: PT-LB2U/PT-LB1U Trade Name: Panasonic Responsible party: Panasonic Solutions Company Address: 3 Panasonic Way, Secaucus, NJ - Panasonic PTLB2U | User Manual - Page 4
la sécurit 59 Remplacement de l'unite de la lampe....... 63 Longer lamp life The lamp replacement cycle is longer than the former model. ( page 45) Approx. 3 000 hours (PT-LB90NTU) Approx. 5 000 hours (PT-LB2U/PT-LB1U) (LAMP POWER: In "ECO") Standby power reduction The - Panasonic PTLB2U | User Manual - Page 5
accessible when problems occur. If the followings problems occur, cut off the power supply immediately. Continued use of the projector in these conditions on top of it or wrap it into a bundle. Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary - Panasonic PTLB2U | User Manual - Page 6
projector. Never attempt to remodel or disassemble the projector. High voltages can cause fire or electric shocks. For any inspection, adjustment and repair work, please contact an Authorized Service result if this is not done. • When replacing the lamp, allow it to cool for at least one hour before - Panasonic PTLB2U | User Manual - Page 7
about replacing the lamp unit and check the inside of the projector. CAUTIONS WHEN TRANSPORTING When transporting the projector, the leg Service Center for installation. LENS FOCUS Do not adjust the lens focus in the initial period after switching the projector on. The high clarity projector - Panasonic PTLB2U | User Manual - Page 8
TO VIBRATION OR IMPACT. The service life of its internal components will be shortened. THE PROJECTOR HAS A HIGH PRESSURE MERCURY LAMP THAT IS CHARACTERIZED AS FOLLOWS: • The brightness of the lamp will decrease over time. • The lamp may explode or shorten the lamp life by shocks or chipping damage - Panasonic PTLB2U | User Manual - Page 9
to safety (continued) CLEANING AND MAINTENANCE ASK AN AUTHORIZED SERVICE CENTER TO CLEAN THE INSIDE OF THE PROJECTOR AT LEAST ONCE A YEAR. If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation. It is a good idea to clean the - Panasonic PTLB2U | User Manual - Page 10
has been initialized. ( page 39) Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and environment settings. NOTE: • When the projector is turned on for the first time, you may be required to adjust the "zoom ring" and "focus ring" ( page 11) on the top of - Panasonic PTLB2U | User Manual - Page 11
Preparation Details of your projector PROJECTOR'S MAIN UNIT Top and front view ① ⑤ ② ⑥ ⑦ ③ ⑧ ④ ① Control Panel / ON(G) INPUT SELECT ⑧ ENTER ② LAMP ③ TEMP MENU FUNCTION ④ ⑦ ⑤ ⑥ ① Indicate the power supply's status. ( page 19) ② Indicate the lamp unit's status. ( page 43) - Panasonic PTLB2U | User Manual - Page 12
Air outlet port Hot air comes out from this opening. ⑨ Speaker ⑩ Lamp unit compartment ( page 46) NOTE: • Do not connect any power cable ⑥ ① Connect to a network cable. (See "Network Operation Manual".) ② Connect to a computer to control the projector's operation. ( page 17, 51) ③ Connect to a - Panasonic PTLB2U | User Manual - Page 13
which will cause a malfunction. • The remote control operates within the range of 7 m (23' 0"), approximately ±30 ° vertically and horizontally from the projector avoiding any obstacles. • The operating range may differ due to the screen material and may not be effective with a translucent screen - Panasonic PTLB2U | User Manual - Page 14
height (SH) Screen width (SW) Minimum distance (LW) Maximum distance (LT) PT-LB2 PT-LB1 PT-LB2 PT-LB1 For 4:3 aspect ratio = SD (") × 0.0152 = SD (") × 0. projector at a raised or horizontally tilted position. It may cause the projector to malfunction. -30 ° However, you can tilt the projector - Panasonic PTLB2U | User Manual - Page 15
Menu INSTALLATION Method REAR/DESK Menu INSTALLATION Method REAR/CEILING NOTE: • Use the optional ceiling mount bracket (ET-PKB2) when mounting the projector on the ceiling. • You can adjust the projection angle in the vertical direction by adjusting the leg adjuster button. ( page 22) ENGLISH - Panasonic PTLB2U | User Manual - Page 16
instructions of each peripheral device and turn the peripheral devices off prior to making any connections. • Prepare the selected peripheral devices with the connection cables that correspond to the projector manually for more than one AV equipment connections. Video player Getting started - Panasonic PTLB2U | User Manual - Page 17
the RGB signal cable, tighten the fixing screws on the D-Sub (15-pin) connector. • For the network connection between the projector and computers, see "Network Operation Manual" in the CD-ROM provided. • Only the RGB signal cable (1 piece) is attached. If any other cables are necessary, purchase - Panasonic PTLB2U | User Manual - Page 18
it. Rail guide 3 Latch to the latch catcher and press until it clicks. Latch 4 Connect the power plug to a wall outlet. 4 Hold the connector firmly and detach it from the AC IN terminal. Direct power on function If the power cord is connected to a wall outlet with INITIAL START UP (PROJECTOR SETUP - Panasonic PTLB2U | User Manual - Page 19
POWER INDICATOR STANDBY (R) INPUT SELECT ON(G) LAMP ENTER PTOEMWP MEENRU indicaFUtNoCrTION POWER indicator shows status of the projector's power When the TEMP indicator flashes, the POWER indicator lights red and you cannot turn the projector on. POWER indicator status Indicator status No - Panasonic PTLB2U | User Manual - Page 20
the power cord is connected to a wall outlet. ( page 37) • If the projector is turned on again while the internal cooling fan is still operating by the internal power supply, the display may flicker due to the specifications of the lamp. These are normal and will not affect the performance of the - Panasonic PTLB2U | User Manual - Page 21
no operation for approximately 10 seconds. 2 Press the button again. The lamp goes off and the projection stops. • The cooling fan continues its installed. NOTE: • Confirm that CONTROL PANEL (when operating with the projector body) or REMOTE CONTROLLER (when operating with the remote control) under - Panasonic PTLB2U | User Manual - Page 22
signal is detected and projected automatically when the projector is switched on. ( page 35) • Set the INPUT GUIDE (DISPLAY OPTION ON-SCREEN DISPLAY menu) to DETAILED. If the projector cannot detect any input signal, the "Computer connection guide" will be displayed. ( page 33) 2 Select an input - Panasonic PTLB2U | User Manual - Page 23
For the input terminals, see "Connections". ( page 16) • The input guide automatically disappears when it is left idle. Press [INPUT SELECT] on the COMPUTER2 VIDEO S-VIDEO SET UP THE IMAGE POSITION AUTOMATICALLY The projector automatically adjusts the SHIFT, DOT CLOCK and CLOCK PHASE when - Panasonic PTLB2U | User Manual - Page 24
Remote control operation (continued) RESET TO FACTORY DEFAULT SETTINGS You can reset most of the customized settings to the factory default settings. DEFAULT For details, see "Reset to factory default settings". ( page 26) CONTROL SPEAKER VOLUME You can control the volume of the built-in - Panasonic PTLB2U | User Manual - Page 25
". ( page 26) FUNCTION Press and hold for at least 3 seconds. (Operation during zoom mode) When not using the [FUNCTION] button 1 Select DISABLE in FUNCTION BUTTON (PROJECTOR SETUP menu). 2 Press [ENTER]. 3 Select OK. 4 Press [ENTER]. NOTE: • For details, see FUNCTION BUTTON in - Panasonic PTLB2U | User Manual - Page 26
the factory default settings. • For resetting all the settings, see INITIALIZE ALL (PROJECTOR SETUP menu). ( page 39) • Not all menu items can be reset by pressing [DEFAULT]. Adjust each menu item manually. Current setting SELECT RETURN ENTER FUNCTION 3 Select the sub-menu item. Default setting - Panasonic PTLB2U | User Manual - Page 27
Menu operation (continued) MAIN MENU MENU Main menu ENTER Sub-menu PICTURE POSITION LANGUAGE DISPLAY OPTION PROJECTOR SETUP SECURITY NETWORK SUB MENU Select the required sub-menu item and press ENTER to display the detailed menu. PICTURE menu S-VIDEO/VIDEO/RGB (Moving - Panasonic PTLB2U | User Manual - Page 28
PROJECTOR SETUP menu Sub-menu item Default STATUS - NO SIGNAL SHUT-OFF DISABLE INITIAL START UP LAST MEMORY INSTALLATION FRONT/DESK HIGH ALTITUDE MODE OFF STANDBY MODE ECO LAMP POWER NORMAL LAMP For details of items, see "Network Operation Manual". Sub-menu item WIRED LAN NAME CHANGE - Panasonic PTLB2U | User Manual - Page 29
input signal has less noise, the image may look different from the true image. If so, set to OFF. ▌▌TV-SYSTEM Switch the setting manually to match PAL-M PAL NOTE: • AUTO mode is selected by default. • When the projector is not working properly in AUTO mode, change the setting according to each - Panasonic PTLB2U | User Manual - Page 30
ON(G) LAMP ON(G) LAMP ENTER ENTER TEMP MENUTEMP MENFUUNCTION FUNCTION Set the selected item with ▌▌REALTIME KEYSTONE If the projector is • If you need to correct the keystone, you can correct the distortion manually by adjusting the KEYSTONE. ▌▌KEYSTONE If you need to correct the angle - Panasonic PTLB2U | User Manual - Page 31
50) 4:3 Standard input signal*1 projection is 4:3 aspect ratio. Input signal: XGA Image: ▌▌OVER SCAN Use this function when characters or pictures are cropped near the 080/60i Setting range: 0 to +3 ▌▌ASPECT You can manually switch to the desired aspect ratio. Selectable options vary according - Panasonic PTLB2U | User Manual - Page 32
function can be set when the input signal is smaller than the number of the LCD panel pixels (1024 x 768). Input signal: NTSC Image: HV FIT The image is effective when projecting 4:3 image onto a 16:9 screen. Input signal: XGA ▌▌FRAME LOCK If the projected image is bad, you can activate FRAME LOCK - Panasonic PTLB2U | User Manual - Page 33
ON(G) LAMP ON(G) LAMP ENTER ENTER TEMP MENUTEMP MENFUUNCTION FUNCTION PICTURE POSITION LANGUAGE DISPLAY OPTION PROJECTOR SETUP graphic. The INPUT GUIDE will go off if there is no operation after 10 seconds. Turn off the guide. Display the input method using text. The INPUT GUIDE will go off if - Panasonic PTLB2U | User Manual - Page 34
instructions provided with the computers. • If you want to turn off the computer connection guide is set to OFF, use the projector with utmost care as most of USER OFF Display "Panasonic" logo Display the Software is displayed at the start of the projection. (You can install the Logo Transfer Software - Panasonic PTLB2U | User Manual - Page 35
by default. If you do not need to perform automatic correction, select "BUTTON". ChangeCssheetatttniinnggge CsCehhtatainnngggee setting AUTO BUTTON When the projector detects COMPUTER signal, SHIFT, DOT CLOCK and CLOCK PHASE in the POSITION menu is automatically set. Only when [AUTO SETUP - Panasonic PTLB2U | User Manual - Page 36
. Set the selected item with []. ▌▌STATUS You can check the projector's status. SIGNAL NAME Name of input signal FREQUENCY Scanning frequency of input signal RUNTIME PROJECTOR Display the projector's current usage time LAMP Display the lamp's current usage time Settings 36 ENGLISH - Panasonic PTLB2U | User Manual - Page 37
The standby power is reduced to 0.4 W to save power The power of the projector can be turned ON and the audio output can be set active by controlling the wired LAN in standby mode ▌▌LAMP POWER You can adjust the power of the lamp to save electricity, prolong the lamp life and reduce the noise. - Panasonic PTLB2U | User Manual - Page 38
the lamp replacement time. • The lamp life varies depending on the usage condition (number of power-on times, etc.). ▌▌EMULATE When the projector is D3500 D4000 D/W5K series D/W/Z6K series L730 L780 L735 L785 F/W series LB2 Series LB1 Series LB75 Series LB78 Series LB80 Series LB90 Series D3500 - Panasonic PTLB2U | User Manual - Page 39
and turn the power off according to the instruction. (All other buttons are deactivated.) • The LANGUAGE and INITIAL SETTING menu screen will be displayed when the power is connected. ( page 10) NOTE: • The usage time of the projector, lamp runtime and the NETWORK settings will not be initialized - Panasonic PTLB2U | User Manual - Page 40
AV MUTE COMPUTER COMPUTER VIDEO VIDEO DEFAULT FDUENFCATUIOLNT INFDUENXC-TWIOINN. INDEX- WIN. STANDBY (R) STANDBY (R) INPUT SELECT INPUT SELECT ON(G) LAMP ON(G) LAMP ENTER ENTER TEMP MENUTEMP MENFUUNCTION FUNCTION Set the selected item with []. When you use SECURITY menu for the first - Panasonic PTLB2U | User Manual - Page 41
RETURN ENTER 2 ENTER To select OK Select CANCEL or press [MENU/RETURN] to return to the previous menu without setting. NOTE: • When using the projector for the first time or after INITIALIZE ALL operation is activated, the initial password is set to AAAA. • Change your password regularly. Do not - Panasonic PTLB2U | User Manual - Page 42
(R) STANDBY (R) INPUT SELECT INPUT SELECT ON(G) LAMP ON(G) LAMP ENTER ENTER TEMP MENUTEMP MENFUUNCTION FUNCTION Set the Operation Manual". WIRED LAN You can set up a wired LAN. NAME CHANGE You can change the name of the projector. NETWORK CONTROL When controlling the projector with - Panasonic PTLB2U | User Manual - Page 43
LAMP indicator still lights or flashes after the above remedy, contact an Authorized Service Center. TEMP INDICATOR Indicator • Illuminating red while projecting and the alert will be displayed. • Flashing red and power is turned off. Problem The temperature inside and/or outside the projector - Panasonic PTLB2U | User Manual - Page 44
dust from the air filter. Maintenance Tab Air filter 3 Install the air filter. Install in the reverse order to 1). NOTE: • Do not use the projector without attaching the air filter. Otherwise, it will suck in dirt and dust which can cause malfunction. • The TEMP indicator may flash because of - Panasonic PTLB2U | User Manual - Page 45
hours of use is a rough guide of the replacing time and that might be shortened due to usage conditions, specifications of the lamp unit or environmental conditions. You can check the duration of usage time by checking LAMP RUNTIME in the PROJECTOR SETUP menu. Do not use a lamp unit over 5 000 hours - Panasonic PTLB2U | User Manual - Page 46
unit has cooled. 2 Use a Phillips-head screwdriver to loosen the 1 lamp unit cover screw on the back of the projector until the screw loosen and remove the lamp unit cover. Lamp unit cover screw Lamp unit cover 4 Press in the lamp unit until it clicks and make sure the unit is installed securely - Panasonic PTLB2U | User Manual - Page 47
PROJECTOR SETUP menu. To select LAMP RUNTIME. 10 ENTER Press and hold for approximately 3 seconds. NOTE: • If any button other than the [POWER] is pressed, the LAMP RUNTIME screen disappears and the lamp • For details, see the work instruction manual packed together with the ceiling mount bracket - Panasonic PTLB2U | User Manual - Page 48
Troubleshooting Confirm the following problem and cause. If the suggested solutions do not solve the problem, contact an Authorized Service Center. Problem TEMP or LAMP indicator is lit or flashes. zz The lamp unit cover has not been securely installed. zz CONTROL PANEL in the PROJECTOR SETUP menu - Panasonic PTLB2U | User Manual - Page 49
15/16") 80 (3 - 5/32") 11 (7/16") 69 (2 - 23/32") 79.2 (3 - 1/8") 93.5 (3 - 11/16") 178.2 (7 - 1/32") Trademark acknowledgements • VGA and XGA are trademarks of International Business Machines Corporation. • S-VGA is a registered trademark of the Video Electronics Standards Association. • HDMI, the - Panasonic PTLB2U | User Manual - Page 50
information LIST OF COMPATIBLE SIGNALS This projector can project the following image signals. × 624 49.7 74.6 57.3 A 1 024 × 768 39.6 50.1 51.9 AA 1 024 × 768 48.4 60 65 AA XGA 1 024 × 768 56.5 70.1 75 AA 1 024 × 768 60 75 78.8 AA 1 024 × 768 68.7 85 94.5 AA - Panasonic PTLB2U | User Manual - Page 51
the computer will start with STX, and proceed to Command, Parameter and end with ETX. You can add the required parameter. NOTE: • The projector cannot receive any command for 10 seconds after the lamp is switched on. Wait for 10 seconds before sending the command. • For multiple commands, check the - Panasonic PTLB2U | User Manual - Page 52
following commands are used for control of the projector with a computer. (Operation commands) Command PON POF AVL IIS Q$S OSH Control contents Power on Power off Volume Input Lamp condition query AV mute Remarks • The PON command is ignored during lamp ON control. • If a PON command is received - Panasonic PTLB2U | User Manual - Page 53
LCD panels (RGB) Active matrix method 786 432 (1 024 × 768) × 3 panels Manual zoom (1.2×)/Manual focus F 1.64 - 1.87, f 18.8 mm - 22.56 mm (PT-LB2U) F 2.0 - 2.2, f 19.22 mm - 22.68 mm (PT-LB1U) UHM lamp (220 W) 2 600 lm (PT-LB2U) 2 200 lm (PT-LB1U) 15 kHz - 91 kHz 50 Hz - 85 Hz Less than - Panasonic PTLB2U | User Manual - Page 54
Specifications (continued) Cabinet Dimensions Weight Operating environment Moulded plastic (PC+ABS) zzWidth: 307 mm (12 3/32") zzHeight: 69 mm (2 23/32") zzLength: 210 mm (8 9/32") (not including surface projection parts) Approx. 2.3 kg (5.1 lbs.) *4 zzTemperature: 0 °C - 40 °C (32 °F - 104 °F) - Panasonic PTLB2U | User Manual - Page 55
START UP 37 INSTALLATION 37 K KEYSTONE 30 L LAMP INDICATOR 43 LAMP POWER 37 LAMP RUNTIME 38 LANGUAGE MENU 33 LANGUAGE 10 LIST OF TEXT CHANGE 40 TEXT DISPLAY 40 TINT 29 Troubleshooting 48 TURN THE PROJECTOR OFF.......... 21 TURN THE PROJECTOR ON........... 20 TV-SYSTEM 29 V VOLUME - Panasonic PTLB2U | User Manual - Page 56
Removal of spacer at rear adjuster Retirez l'entretoise à l'arrière du dispositif de réglage Removal of spacer at rear adjuster. • Remove the spacer before use. Retirez l'entretoise à l'arrière du dispositif de réglage. • Retirez l'entretoise avant l'utilisation. Spacer Entretoise NOTE: Keep the - Panasonic PTLB2U | User Manual - Page 57
référence future avec votre projecteur Panasonic. Le numéro de série se trouve au bas de l'appareil. Le noter dans l'espace prévu ci-dessous et conserver ce manuel pour le cas où des réparations s'avéreraient nécessaires à l'avenir. Numéro de modèle : PT-LB2U/PT-LB1U Numéro de série : AVERTISSEMENT - Panasonic PTLB2U | User Manual - Page 58
et s'il n'est pas installé et utilisé conformément aux instructions, peut provoquer des interférences nocives aux communications radio. Cependant, il de modèle : PT-LB2U/PT-LB1U Nom du produit : Panasonic Partie responsable : Panasonic Solutions Company Adresse : 3 Panasonic Way, Secaucus, NJ - Panasonic PTLB2U | User Manual - Page 59
plafond) risque d'entraîner une chute du projecteur installé au plafond. Ne pas installer ce projecteur dans un endroit qui n'est pas assez résistant pour supporter le poids du projecteur ou sur une surface en pente ou instable. Cela peut faire tomber le projecteur ou le faire basculer, ce qui peut - Panasonic PTLB2U | User Manual - Page 60
veiller à débrancher la fiche du cordon d'alimentation de la prise de courant. Il y a risque d'électrocution ou d'explosion. • Lors du remplacement de la lampe, la laisser refroidir pendant au moins une heure avant de la manipuler, sinon il y a des risques de brûlures. Ne pas laisser des enfants ou - Panasonic PTLB2U | User Manual - Page 61
médecin immédiatement. S'adresser au revendeur pour le remplacement de la lampe et l'inspection de l'intérieur du projecteur. PRECAUTIONS LORS DU TRANSPORT au point de l'objectif dans la période initiale après la mise en service du projecteur. L'objectif du projecteur à clarté élevée est affecté sur - Panasonic PTLB2U | User Manual - Page 62
de vie. Prévoir une lampe de remplacement. COMPOSANTS OPTIQUES Il arrêt de ce projecteur par un tiers malintentionné. Instructions de sécurité • Le réseau de connexion doit N'utilisez pas un mot de passe facile à deviner. • Panasonic et ses filiales ne vous demanderont jamais votre mot de passe de - Panasonic PTLB2U | User Manual - Page 63
, elle pourrait s'endommager ou éclater. • Si vous souhaitez mettre la lampe usagée au rebut, veuillez contacter les les autorités locales ou votre distributeur dans les 30 secondes le message disparaît. Affichage « REMPLACER LA LAMPE » dans la partie supérieure gauche jusqu'à ce que répondiez - Panasonic PTLB2U | User Manual - Page 64
cas d'installation du projecteur au plafond, ne jamais travailler directement dessous et éloigner le visage du projecteur. • S'assurer d'installer l'unité de la lampe et de fixer la protection de l'unité fermement. Si elles ne sont pas installées fermement, le circuit de protection peut s'enclencher - Panasonic PTLB2U | User Manual - Page 65
: • Si vous appuyez sur une autre touche que ALIMENTATION, l'écran DURÉE DE LA LAMPE disparaît et la durée de la lampe n'est pas redéfinie. (Répéter à partir de l'étape 8). 11 Une fois que la lampe s'éteint, la projection s'arrête et la touche ALIMENTATION sur l'unité principale est allum - Panasonic PTLB2U | User Manual - Page 66
apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2010 Panasonic Solutions Company 3 Panasonic Way, Secaucus, NJ 07094 TEL: (877) 803 - 8492 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 TEL: (905
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
 |
 |
PT-LB2U
PT-LB1U
Thank you for purchasing a Panasonic Projector.
Before operating this product, please read the instructions carefully, and save this manual
±
for future use.
Before using your projector, be sure to read “Precautions with regard to safety”
(pages 5 to 9).
For network operation, please read the Network Operation Manual.
±
ENGLISH
TQBJ0322-1
AUTO
SETUP
MENU
RETURN
ENTER
FREEZE
AV
MUTE
COMPUTER
VIDEO
DEFAULT
FUNCTION
WIN.
INDEX-
DIGITAL ZOOM
VOLUME
Operating Instructions
Basic Manual
LCD Projector
Commercial Use
Model No.