Panasonic TH-85PF12U 85" Plasma Tv

Panasonic TH-85PF12U - 85.3" Plasma Panel Manual

Get Panasonic TH-85PF12U - 85.3inch Plasma Panel PDF manuals and user guides
UPC - 037988242801
View all Panasonic TH-85PF12U manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic TH-85PF12U manual content summary:

  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 1
    Operating Instructions High Definition Plasma Display Model No. TH-85PF12U The illustration shown is an image. English Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. TQBC2502
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 2
    user that important operating and servicing instructions servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 3
    . Install in accordance with the manufacturer's instructions. 8) Do not install near any heat by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 4
    Command Timer 58 Shipping condition 59 Troubleshooting 60 List of Aspect Modes 61 Applicable input signals 62 Command list of Weekly Command Timer........... 64 Specifications 65 Panasonic Professional Flat Panel Display Limited Warranty 66 LIMITED WARRANTY STATEMENT 67 Customer Service 68
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 5
    with the instructions, may cause user's authority to operate this device. FCC Declaration of Conformity Model No. TH-85PF12U Responsible Party: Contact Source: Panasonic Corporation of North America One Panasonic Way 1F-10, Secaucus, NJ 07094 Panasonic Professional Display Company Panasonic Plasma
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 6
    by Panasonic Corporation.) • Pedestal TY-ST85P12 • Floor stand TY-ST85PF12 • Wall-hanging -FB7SD • HD-SDI Terminal Board TY-FB9HD • HD-SDI Terminal Board with audio TY-FB10HD • Dual Link HD-SDI Terminal cord from the wall outlet and clean it with a dry cloth. This Plasma Display radiates infrared
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 7
    . If damage to the cable is suspected, have it repaired at an Authorized Service Center. If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet. If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke or an
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 8
    to the operating instructions for the board. Remote Control Batteries Requires two . + + - "AA" size Helpful Hint: For frequent remote control users, replace old batteries with Alkaline batteries for longer life. Precaution on remote control acts sporadically or stops operating the Plasma Display
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 9
    Connections AUDIO OUT Terminals connection RL AUDIO OUT Stereophonic sound code audio equipment - How to Unfasten the AC cord Loosen the fixing band securing the AC cord. To loosen: Push the catch Pull line-in - Cable fixing bands Secure any excess cables with bands as required. Note: Two fixing
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 10
    is set to "4:3", and 1,920 × 1,080 dots when the aspect mode is set to "FULL". If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity. • The PC V DC GND (Ground) Pin No. 11 12 13 14 15 Signal Name NC (not connected) SDA HD/SYNC VD SCL 10
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 11
    to the RS-232C interface specification, so that the Plasma Display can be controlled by a computer which is connected to this PC signal) Panasonic Auto (For Video signal) JUST (For HD signal) 4:3 (For HD signal) H-FILL (For HD signal) ZOOM (For HD signal) With the power off, this display responds to
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 12
    this set. HDMI AV OUT DVD player COMPONENT / RGB connection COMPONENT VIDEO OUT Example of input signal source PR DVD Y, PB, PR, PB OUT Y Digital TV-SET-TOP-BOX (DTV-STB) L AUDIO OUT R HDMI AV OUT DVD player RCA-BNC adapter plug Computer RGB Camcorder or R AUDIO L PR/CR/R PB/CB
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 13
    the plug to the Wall Outlet. Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Right side surface Main Power On / Off Switch Remote Control Power Indicator Sensor Press the button on the remote control to turn the Plasma Display off. Power Indicator
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 14
    Power ON / OFF When first switching on the unit Following screen will be displayed when the unit is turned on for the first time. Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE OSD LANGUAGE 1 Select the language. 2 Set. English (UK) Deutsch Français Italiano
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 15
    input mode cannot be selected for the main picture and sub picture. • Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 60
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 16
    Remote control sensor Power Indicator The Power Indicator will light. • Power-OFF ...... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall Up "+" Down "-" When the menu screen is displayed: "+": press to move the cursor up "-":
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 17
    Remote Control Transmitter R button (see page 23) Press the R button to return to previous menu screen. Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode.
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 18
    (480) / 60i • 60p, 625 (575) / 50i • 50p): 4:3 ZOOM FULL JUST For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p displayed in 4:3 mode for an extended period, as this can cause a permanent image retention to remain on the Plasma Display Panel. Panasonic AUTO The display
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 19
    • 60p, 625 (575) / 50i • 50p): 4:3 Zoom1 Zoom2 Zoom3 16:9 14:9 Just ASPECT Controls For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • PIP You can display two pictures, such as a video image and computer image, in a two-screen display. (Use the remote control for this
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 20
    . Set these functions with "TRANSPARENCY" or "INSERT" in "MULTI PIP SETUP". (see page 47) Transparent Function Data such as text are displayed transparently on the background image. Insertion Function The sub screen image is divided into transparent and nontransparent areas, and only the non
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 21
    also return to main screen operations by operating the remote control buttons (except for ). * It takes more than 5 seconds if a slot mounted with a Dual HDMI Terminal Board (TY-FB10HMD) is selected. Selecting the Sub Screen Position (During P IN P Display) Each time this button is pressed, the sub
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 22
    an enlargement of the designated part of the displayed image. 1 Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. EXIT 1 During Digital Zoom, only the following buttons can be operated. [Remote control] POSITION / ACTION button [Unit] Right side
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 23
    On-Screen Menu Displays 1 Display the menu screen. Remote Control Unit Press to select. (Example: PICTURE menu) MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 24
    28, 29) SIGNAL [ VIDEO ] 3D Y/C FILTER (NTSC) ON COLOR SYSTEM 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) REFRESH RATE NOISE REDUCTION AUTO OFF 4:3 100 Hz OFF (see page 51-54) SETTINGS RESET (see page 39-41) MULTI DISPLAY SETUP MULTI DISPLAY SETUP OFF HORIZONTAL SCALE × 2 VERTICAL SCALE
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 25
    PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the only support single screen display. Two screen display or multiple display are not supported. • Display size" in the Options menu (see page 56) is set to "On" Using Remote Control Note: To operate this function, please purchase remote
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 26
    once and press ACTION ( ) then adjust POS. /SIZE manually. H-POS Adjust the horizontal position. V-POS Adjust the vertical position ) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized. (During
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 27
    ON (RIGHT) Note: 2k1k signals can only be received when the Dual Link HD-SDI Terminal Board (TY-FB11DHD) is installed. Helpful Hint ( / NORMALIZE Normalization) While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 28
    COLOR MANAGEMENT ON Enables vivid color adjustment automatically. Helpful Hint ( / NORMALIZE Normalization) While the "PICTURE" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 29
    "S+ CURVE" can be selected. When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD), "S+ CURVE" cannot be selected. *2 When 2k1k ( / NORMALIZE Normalization) On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 30
    COLOR TEMP COLOR MANAGEMENT ADVANCED SETTINGS CINEMA 25 0 0 0 5 NORMAL OFF Weekly Command Timer Memory lock Onscreen display Initial INPUT Initial VOL level Maximum VOL level INPUT lock Button lock Remocon User level Advanced PIP On Off Off 0 Off 0 Off Off Off Off Lock profiles (page 33
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 31
    Saving profiles Picture Profiles Follow these steps to save picture adjustment values as profiles. Note: When the settings are locked in "EXTENDED LIFE SETTINGS", profiles cannot be saved. 1 5 Specify the picture quality in the PICTURE menu and ADVANCED SETTINGS. (see page 28, 29) Enter a name for
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 32
    Picture Profiles Loading profiles Load profiles and apply the picture adjustment values to the display as follows. Notes: • Loaded profiles are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN). (see page 15) • When the
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 33
    screen. (see page 55) 2 Select "Memory lock". Options 1/3 1 select Weekly Command Timer Memory lock Onscreen display Initial INPUT Initial VOL level Maximum VOL level INPUT lock Button lock Remocon User level Advanced PIP On Off Off 0 Off 0 Off Off Off Off 2 access 3 Enter a 4-digit
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 34
    Ok Cancel Note: Make a note of the new password to remember it. 5 Exit the menu. Switches to "PICTURE MENU" mode display. 1 Follow steps 1-4 in the previous procedure, . 2 Select "isf Mode". Memory lock MEMORY1 MEMORY2 MEMORY3 MEMORY4 isf Mode
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 35
    , if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. SDI SOUND OUTPUT This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 36
    PRESENT TIME SETUP / SET UP TIMER The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. 1 Press to display the SET UP menu. SET UP 2/2 2 Press to select SET UP TIMER
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 37
    a white bar will scroll on it. WHITE SCREEN : The whole screen will be white. Note: OVERLAY SCROLLING BAR is not effective during two screen display. 4 MODE selection Press to select the MODE. Press to select each mode items. Off INTERVAL : Operates when SHOW DURATION and SAVER DURATION are
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 38
    SCREENSAVER (For preventing image retention) Setup of SCREENSAVER Time After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".) Press to
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 39
    menu will be reflected to the "PICTURE" menu. SIDE BAR ADJUST Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display field. To reduce the risk of such an image retention, illuminate the side
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 40
    position of the screen slightly to reduce image retention on the display panel. OFF: NANODRIFT SAVER does not operate. MIN-MAX: NANODRIFT SAVER operates. The display position of the screen moves at set time intervals. You can set the screen movement range. Some of the screen may appear to
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 41
    CUSTOM SETTINGS Set the individual "Image Retention Reduction" menu. 1 Select "CUSTOM SETTINGS". EXTENDED LIFE SETTINGS EXPRESS SETTINGS CUSTOM SETTINGS RESET 1 select 2 access 2 To set each menu to the recommended setting: Select "RECOMMENDED SETTINGS". EXTENDED LIFE SETTINGS 1 select
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 42
    OFF: When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. When this function following conditions to turn the power on or off automatically. When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 43
    on the input selected (see below). Addition sign Selected Input "A" Composite "B" S VIDEO Selecting the On-Screen Menu Language 1 Press to display the SET UP menu. 2 Press to select OSD LANGUAGE. Press to select your preferred language. Selectable languages English(UK) Deutsch Français
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 44
    . Fan control for vertical installation. On-screen menu will be rotated 90 degrees counterclockwise to be suitable for the setting. Notes: • If the display is installed vertically, the power switch should be located at the bottom. • Fan control will be switched when turning on the unit next time
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 45
    in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a Display number to determine its location. (Example) group of 4 (2 × 2) group of 9 (3 × 3) group of 16 (4 × 4) group
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 46
    the , , buttons at the same time.) Notes: • Set the Remote ID "On" to operate the ID remote control. If remote ID is set to "On", you can use the remote control without identical ID number during option menu display. (see page 56) • The ID remote control cannot be used when ID select is set to
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 47
    MODE TRANSPARENCY TRANSPARENCY LEVEL INSERT INSERT LEVEL BLEND PIP - OFF 0 % OFF 1 Set the two-screen function. PIP ADVANCED PIP BLEND PIP The display mode can be changed separately for each function that was set in "MULTI PIP SETUP". For "PIP": - (One screen) P AND P P OUT P P IN P For
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 48
    PORTRAIT Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3 times and rotated 90-degree. (Example) Note: When using the PORTRAIT function with displays set vertically, "DISPLAY ORIENTATION" in SET UP menu has to be
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 49
    SEAM HIDES VIDEO OFF VIEWING AREA 16:9 • For HD signal videos, the "VIEWING AREA" is set at "16:9", LOCATION 16:9", the aspect mode is set to "FULL". LOCATION setting When PORTRAIT SETUP "ON": Display the image of the selected LOCATION. When PORTRAIT SETUP is "OFF": Represent an area
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 50
    . Y, PB, PR signals "COMPONENT" RGB signals "RGB" 1 Press to display the SET UP menu. SET UP 1/2 SIGNAL SCREENSAVER 2 Press to select the to the DVI input terminals. YUV signals "YUV" RGB signals "RGB" 1 Press to display the SET UP menu. 2 Press to select the "YUV / RGB-IN SELECT". Press
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 51
    COLOR SYSTEM AUTO 3 : 2 PULLDOWN OFF 4 3 : 2 PULLDOWN OFF Panasonic AUTO (4 : 3) 4:3 XGA MODE REFRESH RATE AUTO 100 Hz Press to UP" menu during VIDEO (S VIDEO) input signal mode. ("SIGNAL [VIDEO]" menu is displayed.) Press to select the "3D Y/C FILTER (NTSC)". Press to set ON / OFF
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 52
    input signal mode. ("SIGNAL [VIDEO]" menu is displayed.) Press to select the "COLOR SYSTEM" or "Panasonic AUTO (4:3)". Press to select each function. If the OFF. XGA MODE This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with 60Hz
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 53
    REFRESH RATE SET UP for Input Signals This function sets the refresh rate of the display. This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate. 100 Hz: Reduce screen flicker. 50 Hz: Enhance
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 54
    Link HD-SDI Terminal Board (TY-FB11DHD). Note: Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal display Displays the frequency and the type of the current input signal. This display is valid only for COMPONENT/RGB/PC and Digital input signal. Display
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 55
    VOL level INPUT lock Button lock Remocon User level 1/3 On Off Off 0 Off 0 Off Off Off 3 Press to select "Options". Options Options 2/3 Shipping Off-timer function Enable Initial Power Mode Normal ID select 0 Press to display the Options menu. Remote ID Off Serial ID Off
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 56
    ) On: Power returns in power On. (Power Indicator : green) Note: When using multiple displays, "Standby" is preferred to be set in order to reduce a power load. Sets panel ID number when panel is used in "Remote ID" or "Serial ID". Set value range: 0 - 100 (Standard value: 0) The setting of
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 57
    follows: (Example: HD signal) Off 4:3→H- Manual: Auto: Automatic position adjustment starts when is pressed on the remote control or automatic position adjustment is executed from the POS./SIZE menu. Other than remote control or menu operation, automatic position adjustment starts: When the display
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 58
    next command pages (1-8) of the selected program. Press to show the command setting screen. Options 1/3 Weekly Command Timer Onscreen display On Press ACTION ( ) button Weekly Command Timer Function Monday Tuesday Wednesday Thursday Friday Saturday Sunday Program Edit On Program1 Program3
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 59
    . 2 Press the Volume Up "+" or Down "-" button to select "OSD LANGUAGE". 3 Press and hold the ENTER button till the Shipping menu is displayed. 4 Press the Volume Up "+" or Down "-" button to select "YES". 5 Press the ENTER button and wait for 10 sec. SET UP 1/2 SIGNAL SCREENSAVER EXTENDED
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 60
    Troubleshooting Before you call for service stand-by button on the remote control.) If a signal with a non-applicable color system format, or frequency is input, only the input terminal indication is displayed indicative of malfunctioning. The plasma display panel is manufactured using an extremely
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 61
    fills the screen vertically and is slightly smaller than the screen horizontally. The top and bottom edges of the pictures are cut off. Side panels are displayed at the left and right edges of the screen. Pictures with a 4:3 aspect ratio are enlarged horizontally so that the picture distortion is
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 62
    × 480 @85 Hz 24 800 × × 600 @85 Hz 29 852 Hz 34 1,024 × 768 @85 Hz 35 1,066 × 600 85 Hz 41 1,280 × 1,024 @60 Hz 42 1,280 × 1,024 @75 Hz 43 1,280 × 1,024 @85 85 85.01 56.25 60.32 72.19 75.00 85.06 59.94 50.00 60.00 70.07 75.03 85.00 59.94 60.00 75.00 60.00 60.00 85.00 60.02 75.03 85 HD
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 63
    Applicable Input Signals VIDEO input (HDMI) Signal format Vertical Horizontal frequency (Hz) frequency (kHz) Dot clock (MHz) 1 VGA60 59.94 31.47 25.18 2 525/60p 59.94 31.47 27.00 3 625/50p 50.00 31.25 27.00 4 750/60p 60.00 45.00 74.25 5 750/50p 50.00 37.50 74.25 6 1125/60i
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 64
    JUST) 19 DAM:NORM Aspect (4:3) 20 DAM:SELF Aspect (Panasonic Auto) 21 DAM:ZOOM Aspect (ZOOM) 22 DWA:OFF :OVLOF Advanced PIP mode (OFF) (normal two screen display mode) 30 DWA:OVLON Advanced PIP mode (ON) by powering off/on with the remote control. Turn off and on again with the button
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 65
    TH-85PF12U Power Source 120 V AC, 50/60 Hz Power Consumption Power on Stand-by condition Power off condition Plasma Display panel 1250 W Save OFF 1.0 W, Save ON 0.5 W 0.2 W Drive method : AC type 85 HD/ Remote Control Transmitter Batteries Fixing band Clamper Dimensions (W × H × D) Mass (weight
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 66
    as follows: Models or Parts Professional Flat Panel Display Part Warranty 3 Years Labor Warranty 3 Years On-site or carry-in service in the USA and Puerto Rico may be obtained during the warranty period by contacting Panasonic Professional Display Company Service toll free at 1-800-973-4390
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 67
    . Warranty Service If the product needs to be shipped for service, carefully pack (preferably in the original carton) and enclose a letter, detailing the complaint. Send prepaid and adequately insured to the local authorized Panasonic Service Centre in your area or to Panasonic Technical Support and
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 68
    68
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 69
    Memo 69
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 70
    Memo 70
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 71
    Memo 71
  • Panasonic TH-85PF12U | 85" Plasma Tv - Page 72
    of theft or loss, and for Warranty Service purposes. Model Number Serial Number © Panasonic Corporation 2009 Panasonic Professional Display Company Unit of Panasonic Corporation of North America Executive Office : One Panasonic Way 1F-10, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
The illustration shown is an image.
TQBC2502
Operating Instructions
High De
fi
nition Plasma Display
TH-85PF12U
Model No.