Panasonic UMR20-STAND Installation Instructions

UMR20-STAND

ALIGN

THESE HOLES

ON BOTH

SIDES

FOAM

PADS

REAR

VIEW

REF.

ALIGN THESE

HOLES ON HOOD

AND STAND WITH

UNIT HOLES

UMR20-HOOD

REFERENCE

UMR20-STAND

REFERENCE

P/N:

22149

STAND

ASSEMBLY ONLY:

REMOVE ANY SCREWS FROM THE TOP SIDE HOLES OF AG-UMR20 WHERE

THE STAND IS GOING TO BE ATTACHED.

POSITION THE STAND AND AG-UMR20 AS SHOWN.

ALIGN THE HOLES IN THE UNIT WITH THE SLOTS IN THE SIDES OF THE STAND.

ASSEMBLE USING A 3MM X 8MM PAN HEAD SCREW IN EACH HOLE.

STAND AND HOOD ASSEMBLY:

REMOVE ANY SCREWS FROM THE SIDE HOLES OF AG-UMR20 WHERE THE HOOD

AND STAND ARE GOING TO BE ATTACHED.

POSITION THE HOOD AND AG-UMR20 AS SHOWN WITH STAND LEGS OUTSIDE.

ALIGN THE HOLES IN THE UNIT WITH THE SLOTS IN THE HOOD AND THE HOLES IN THE STAND.

ASSEMBLE USING A 3MM X 8MM PAN HEAD SCREW IN EACH HOLE.

HARDWARE:

4

3MM X 8MM PAN HEAD SCREWS

C10-4906

05-25-17

PHONE: (516) 967-9565

Glen Cove, NY 11542

5 Brewster St.-Unit 2

MODEL

UMR20-STAND FOR PANASONIC AG-UMR20

FEC

FEC