Panasonic WJ-NV300 Installation Guide
Panasonic WJ-NV300 Manual
 |
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic WJ-NV300 manual content summary:
- Panasonic WJ-NV300 | Installation Guide - Page 1
Guide Network Disk Recorder WJ-NV300K Model No. WJ-NV300K/G ERROR OPERATE REC ALARM BUZZER STOP Network Disk Recorder WJ-NV300 (This illustration represents WJ-NV300K.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual - Panasonic WJ-NV300 | Installation Guide - Page 2
user to the presence of important operating and maintenance (servicing) instructions Canada: WJ-NV300K For Europe and other countries: WJ-NV300K/G UL listed model No.: WJ-NV300K CAN ICES in accordance with the instruction manual, may cause harmful record of your purchase to aid identification in the event of - Panasonic WJ-NV300 | Installation Guide - Page 3
is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. Open the fuse - Panasonic WJ-NV300 | Installation Guide - Page 4
warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE USER; (4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; (5) ANY PROBLEM for U.S. WJ-NV300K is warranted for three years. - Panasonic WJ-NV300 | Installation Guide - Page 5
block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any - Panasonic WJ-NV300 | Installation Guide - Page 6
of warranty...4 Warranty for U.S...4 Important safety instructions...5 Preface...7 Features...7 About the user manuals...8 System requirements for a PC...9 Trademarks and registered trademarks...9 Abbreviations...10 GPL/LGPL...10 Copyright...10 Network security...10 About the face matching function - Panasonic WJ-NV300 | Installation Guide - Page 7
Preface The network disk recorders WJ-NV300K and WJ-NV300K/G (hereinafter, recorders) are designed for use within a surveillance system, and record images/audio from up to 32 network cameras (hereinafter, cameras) on the hard disk drives. Number of cameras to be used in the system (9 cameras in - Panasonic WJ-NV300 | Installation Guide - Page 8
represents WJ-NV300K.) Network camera (x 32 max.) ɾɾɾ Network PC About the user manuals There are 4 sets of operating instructions for the WJ-NV300K, WJ-NV300K/G as follows. Installation Guide (this document): Operating Instructions (PDF): Quick Reference Guide: Operating Instructions of - Panasonic WJ-NV300 | Installation Guide - Page 9
bit True color or better Network interface: 10BASE-T/100BASE-TX/ the operating instructions on the provided problems such as slow imaging or the browser becomes inoperable. • Microsoft® Windows® 7 Starter is not supported. Note: • Refer to "Notes about versions of Windows®/Internet Explorer®" (PDF - Panasonic WJ-NV300 | Installation Guide - Page 10
abbreviations are used in this manual. Microsoft® Windows® 8 software con- tained in this product and copyright notice comprised in the GPL/LGPL software. • Please note that Panasonic network against unauthorized access by restricting users to those who log in with an authorized user name and password - Panasonic WJ-NV300 | Installation Guide - Page 11
Camera 1 is available. • A camera supporting the face detection function is required. Refer alarm setup" (☞ Operating Instructions (PDF)), the settings on the "Advanced recording setup" page for Camera and recorder. When many people appear on images at the same time, the following problems may happen - Panasonic WJ-NV300 | Installation Guide - Page 12
face matching function is activated by the setting, the settings for Camera 1 will automatically be changed as follows. Refer to the operating instructions of the connected camera for further information. Video encoding format Image capture size Frame rate Max bit rate (per client) Refresh interval - Panasonic WJ-NV300 | Installation Guide - Page 13
of face matching • Register the target face images from the images recorded by the camera installed under the same conditions. • Perform settings for on a poster, perform the setting for "Setup area" (☞ Operating Instructions (PDF)) so that these faces are not targeted for face matching. - Panasonic WJ-NV300 | Installation Guide - Page 14
ground leakage or damage the product resulting in electric shock. • Contact the dealer fro details. (The grounding installation cost is not included in the price of this product.) Do not engage in work related to the installation and wiring during the power is on. Failure to observe this may cause - Panasonic WJ-NV300 | Installation Guide - Page 15
them after around 18000 hours of operation. • When hard disk drive trouble occurs, replace it immediately. Contact your dealer about servicing. About SDHC/SD memory card • When using an unformatted SDHC/SD memory card, format it with this product. Recorded data on the SDHC/ SD memory card will be - Panasonic WJ-NV300 | Installation Guide - Page 16
for repair, make sure that there is no data on the hard disk drives. Indication label Refer to the indication label placed on the surface of recording. • When the software of this product has detected the internal error and reboot becomes necessary. Disclaimer of warranty on recoded data Panasonic - Panasonic WJ-NV300 | Installation Guide - Page 17
be used indoors. Panasonic assumes no responsibility the following. Failure to observe this may cause fire or trouble. • Do not block the ventilation openings. Maintain the front side since this product is designed to cool the hard disk drives by inhaling air from the front. Avoid placing this - Panasonic WJ-NV300 | Installation Guide - Page 18
Copy port (This illustration represents WJ-NV300K.) * The copy port has Instructions (PDF) for further information about alarms and errors. e Copy port [COPY] Connect an external storage device (external Hard disk drive, USB memory) to this port and copy images and audio recorded on the hard disk - Panasonic WJ-NV300 | Installation Guide - Page 19
Insert an SD memory card (option) Step 1 Open the SDHC/SD memory card slot cover. Pull the tab down. SDHC/SD memory card slot cover Step 2 Insert a SD memory card to the slot until it clicks. Hearing a click means that the card is properly inserted. When inserting an SD memory card, confirm that the - Panasonic WJ-NV300 | Installation Guide - Page 20
represents WJ-NV300K.) q Power cord inlet [AC IN] Connect the provided power cord to this inlet. The power plug of the recorder is Network port (Camera/PC port) u Network port (PC port) i Network port (Camera/PC port) [CAMERA/PC] Connect the recorder with a PC and cameras via a network - Panasonic WJ-NV300 | Installation Guide - Page 21
How to use the power cord plug brace Put the hooks of the power cord plug brace on the power cord inlet to fix the power cord plug. Power cord plug brace 21 - Panasonic WJ-NV300 | Installation Guide - Page 22
and hosts (PC) that accesses the recorder via a network such as a LAN. Up to 16 users can be registered. It is possible to register the following for the user information. Item User name Password Level Priority level Default screen Description User name is to be registered to log in to the - Panasonic WJ-NV300 | Installation Guide - Page 23
it is not necessary to change other default settings, it is possible to start operations. ➜➜ n Setup ☞ Operating Instructions (PDF) Start operations n If necessary, perform the detailed settings for each function. Note: • Some functions are not supported depending on the models of the connected - Panasonic WJ-NV300 | Installation Guide - Page 24
cable (locally procured) 10BASE-T/100BASE-X/1000BASE-T: category 5e or better (straight) for WJ-NV300K, category 7 (straight) for WJ-NV300K/G Switching hub ɾɾɾ Network camera (x 32 max.) Note: • For the connection between the recorder and the camera, build the system so that the total bit rate of - Panasonic WJ-NV300 | Installation Guide - Page 25
a main monitor (to be used to display live images, recorded images or the setup menu) and a sub monitor (to be Sub monitor (HDMI) Powered speaker Audio cable (locally procured) BNC cable (locally procured) Recorder HDMI cable (option) HDMI cable (option) AC IN SIGNAL GND HDD 2 VIDEO AUDIO - Panasonic WJ-NV300 | Installation Guide - Page 26
10BASE-T/100BASE-X/1000BASE-T: category 5e or better (straight) for WJ-NV300K, category 7 (straight) for WJ-NV300K/G PC IP address: 192.168.0.x (except 0, 1, 250 and 255) Subnet mask: 255.255.255.0 Default gateway: 192.168.0.1 Switching hub Network IP address: 192.168.0.1 Subnet mask: 255.255.255 - Panasonic WJ-NV300 | Installation Guide - Page 27
LAN cable (locally procured) 10BASE-T/100BASE-X/1000BASE-T: category 5e or better (straight) for WJ-NV300K, category 7 (straight) for WJ-NV300K/G Network Switching hub Switching hub ɾɾɾ Network camera (x 32 max.) Note: • Cameras shall be connected to the camera/PC port. If the camera is connected - Panasonic WJ-NV300 | Installation Guide - Page 28
be connected with a single network disk recorder. Connect the recorder and the extension unit using the connection cable provided with the extension unit. Connect the extension units (WJ-HDE400) as shown in the illustration below. Refer also to the operating instructions of the extension unit. When - Panasonic WJ-NV300 | Installation Guide - Page 29
be compatible with the pin array. Pin array The pin array is different from other Panasonic recorders. Make sure 13 1 that the connection is correct referring to the following. ALARM/CONTROL the network logs" (☞ Operating Instructions (PDF)) for further information about each error output. 29 - Panasonic WJ-NV300 | Installation Guide - Page 30
Series recording output Time adjustment signal input Signal ground Alarm output Alarm reset output Alarm recording During recording Disk Buzzer recording. Note: • When adjusting the time using the time adjustment signal input, select "On" for "Auto time adjustment". (☞ Operating Instructions (PDF)) - Panasonic WJ-NV300 | Installation Guide - Page 31
Network error output Alarm reset input Face matching output HDD error output Camera error output Recorder error output Recording - the "Maintenance" page - "System setup" of the setup menu. (☞ Operating Instructions (PDF)) Note: • During "L active (Low active)", the logic will be implemented when - Panasonic WJ-NV300 | Installation Guide - Page 32
. (☞ Page 35) Step 2 Remove the HDD bracket screws (x2) on the HDD slots on the rear panel of the recorder, and pull out the HDD bracket. Step 3 Install the hard disk drive into the HDD bracket using 4 HDD fixing screws (accessories). Tightening torque for the screws: 0.49 N·m {0.36 lbf·ft} HDD - Panasonic WJ-NV300 | Installation Guide - Page 33
another one, it is necessary to perform the removal process. In this case, do the following. Step 1 Perform the removal process of the hard disk drive. (☞ Operating Instructions (PDF)) Step 2 Turn off the power of the recorder. (☞ Page 35) Step 3 Pull out the HDD bracket from the rear panel of the - Panasonic WJ-NV300 | Installation Guide - Page 34
startup, enter the user name and password. Refer to the Operating Instructions (PDF) for descriptions of how to operate. • The default administrator name and password are as follows. Administrator name : ADMIN Password : 12345 • If the "Registration Key" for the recorder is once registered, the - Panasonic WJ-NV300 | Installation Guide - Page 35
mode" on the "REC & event" page - [Advanced setup] tab of the setup menu to stop all recordings. (☞ Operating Instructions (PDF)) Step 2 Unplug the power plug from the outlet after confirming that the [REC] indicators are off. →→ The [OPERATE] indicator will go off. Note: • Be sure - Panasonic WJ-NV300 | Installation Guide - Page 36
is the default. Configure each setting according to your needs. Step 1 Obtain the "Registration Key" for the recorder by following the instructions on WJ-NVE30, WJ-NVE30W: optional) When using the extra functions, obtain the "Registration Key" for Additional Business Intelligence Kit WJ-NVF30, WJ - Panasonic WJ-NV300 | Installation Guide - Page 37
. They cannot be registered in the reverse order. Step 9 Click the [Restart] button on the registration window to register the license. →→ The recorder will reboot and each license will become effective. →→ The "Registration key input" window will return to the registration window. Note: • When an - Panasonic WJ-NV300 | Installation Guide - Page 38
mouse connected to the mouse connection port on the rear side of the recorder. It is also possible to perform operations and some settings of the recorder from the web browser. Refer to the Operating Instructions (PDF) for descriptions of how to operate from the web browser and the configurable - Panasonic WJ-NV300 | Installation Guide - Page 39
About the operation of on-screen keyboard Use the on-screen keyboard to enter characters for the setting items. When clicking the [ ] icon beside the entry field, the onscreen keyboard will be displayed, and it will become possible to enter characters by clicking the character keys on the keyboard. - Panasonic WJ-NV300 | Installation Guide - Page 40
to operate the recorder will be performed, but other settings will remain default. On the [ to configure the minimum settings required to operate the recorder, such as date & time and camera registration. [Exit] button Applies the settings to the recorder and closes the setup menu to return to - Panasonic WJ-NV300 | Installation Guide - Page 41
zone. GMT-12:00 - GMT+13:00 Default: GMT-5:00 (WJ-NV300K) GMT (WJ-NV300K/G) Marking the checkbox for [Activate the Daylight saving recorder. Note: • To use the existing IP address of the connected cam- eras, refer to "Detect cameras for registration [Detect cameras]" (☞ Operating Instructions (PDF - Panasonic WJ-NV300 | Installation Guide - Page 42
registered in the default settings. To conform For the video encoder (WJ-GXE500), only the camera Panasonic cameras are used, the model numbers will be displayed. [Results] New: Displayed when the camera is newly connected to the recorder . Refer to the operating instructions of the camera for further - Panasonic WJ-NV300 | Installation Guide - Page 43
Instructions (PDF)) recording on the hard disk drives is available. Note: • The referenced recording days will be calculated based on the assumption that recording is started on Monday. • The HDD consumption for the event recording will be excluded. • If a camera manufactured by other than Panasonic - Panasonic WJ-NV300 | Installation Guide - Page 44
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Power is not turned on. Camera images are not displayed on - Panasonic WJ-NV300 | Installation Guide - Page 45
used? • Some SD memory cards cannot be used with this recorder. It is recommended to use Panasonic's SD memory card. • Is the SD memory card formatted? • Are data copied to the SD memory card? 46 Operating Instructions Inspect the power cord, power plug and connectors periodically. Symptom The - Panasonic WJ-NV300 | Installation Guide - Page 46
60 Hz (WJ-NV300K) 220 V - 240 V AC 50 Hz/60 Hz (WJ-NV300K/G) 55 W (when 2 HDDs (4TB) are installed) Recorder error output*2, Recording error output*2, Time adjustment signal input*1, Alarm output*2, +5 V output*3, (D-sub 25-pin) Network port: 10BASE-T/100BASE-TX/1000BASE-T (RJ-45), x2 Supported - Panasonic WJ-NV300 | Installation Guide - Page 47
...1 pc. Installation Guide (this book 1 pc. Quick Reference Guide 1 pc. Warranty (provided with WJ-NV300K 1 pc. The following are for installation: Power cord (WJ-NV300K 1 pc. Power cord (WJ-NV300K/G 2 pcs. HDD fixing screw 8 pcs. * The CD-ROM contains the operating instructions (PDF). 47 - Panasonic WJ-NV300 | Installation Guide - Page 48
service or users support, call 1.800.528.6747 Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca For Europe and other countries: Panasonic Corporation http://panasonic.net Panasonic System Networks
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
(This illustration represents WJ-NV300K.)
Installation Guide
Network Disk Recorder
Model No.
WJ-NV300K
WJ-NV300K/G
Network Disk Recorder WJ-NV300
ERROR
REC
OPERATE
ALARM
BUZZER STOP