Panasonic WVCF344 WVCF344 User Guide

Panasonic WVCF344 Manual

Get Panasonic WVCF344 PDF manuals and user guides View all Panasonic WVCF344 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WVCF344 manual content summary:

  • Panasonic WVCF344 | WVCF344 User Guide - Page 1
    Instructions Color CCTV Camera Model No: WV-CF354 WV-CF344 This illustration represents WV-CF344. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual
  • Panasonic WVCF344 | WVCF344 User Guide - Page 2
    the user manuals The operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. This document explains how to configure the settings of the camera. Refer to the installation guide for further information about how to install the camera. Adobe
  • Panasonic WVCF344 | WVCF344 User Guide - Page 3
    transition diagram CF354 7 Screen transition diagram CF344 8 Camera title setting [CAMERA ID]...9 Camera operation setting [CAMERA SETUP 10 UP 13 White balance setting [WHITE BAL 13 Manual fine adjustment of white balance 14 Digital noise reduction function setting [DNR 15 Black-and-white
  • Panasonic WVCF344 | WVCF344 User Guide - Page 4
    . DNR Selects the level of the digital noise reduction function. D&N (ELE) that it matches the square monitor. FOCUS CF354 Selects the adjustment method and fine adjustment method hue). PIX OFF Corrects image defects such as flaws. CAMERA RESET SER.NO. Restores the settings in the setup menu
  • Panasonic WVCF344 | WVCF344 User Guide - Page 5
    the top screen of the setup menu. Step 1 Press the [UP] button or the [DOWN] button to move the cursor to "END". MODEL WV-CF354 CAMERA ID OFF CAMERA SYSTEM SPECIAL LANGUAGE Step 2 Press the [RIGHT] button to move the cursor to "SETUP", and press the [SET] button to change the setup mode
  • Panasonic WVCF344 | WVCF344 User Guide - Page 6
    Screenshot 3 The selected setup screen in the setup menu appears on the screen. **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH D&N(ELE) OFF VMD OFF RET TOP END
  • Panasonic WVCF344 | WVCF344 User Guide - Page 7
    Screen transition diagram CF354 Top screen MODEL WV-CF354 CAMERA ID OFF CAMERA SYSTEM SPECIAL LANGUAGE END SETUP DISABLE "CAMERA ID" screen **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE POSI RET TOP END RESET "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC
  • Panasonic WVCF344 | WVCF344 User Guide - Page 8
    Screen transition diagram CF344 Top screen MODEL WV-CF344 CAMERA ID OFF CAMERA SYSTEM SPECIAL LANGUAGE END SETUP DISABLE 8 "CAMERA ID" screen **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE POSI RET TOP END RESET "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC
  • Panasonic WVCF344 | WVCF344 User Guide - Page 9
    ID" display can be turned on or off on the monitor screen. Top screen MODEL WV-CF354 CAMERA ID ON CAMERA SYSTEM SPECIAL LANGUAGE "CAMERA ID" screen **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE POSI RET TOP END RESET Display positioning screen FLOOR 1 END SETUP ENABLE
  • Panasonic WVCF344 | WVCF344 User Guide - Page 10
    be made by shortcut operation. ( page 27) "SCENE1" is set as the default setting. Screen when "SCENE1" is selected Screen when "SCENE2" is selected **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH D&N(ELE) OFF VMD OFF RET TOP END
  • Panasonic WVCF344 | WVCF344 User Guide - Page 11
    with fixed iris or manual iris. Back light compensation function Follow the procedure below. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ the following options. ABS (Auto Black Stretch Technology) The latest digital signal technology is applied to automatically detect the dark areas in
  • Panasonic WVCF344 | WVCF344 User Guide - Page 12
    Note: • When "BLC" is set to "ON", "ABS" displays "---" and may not be operated. Step 4 When "BLC" is set to "OFF", bright areas of an image are masked to facilitate the visibility of dark areas. Move the cursor to "MASK SET" and press the [SET] button. → The mask setting screen appears. Step 5 Use
  • Panasonic WVCF344 | WVCF344 User Guide - Page 13
    : Activates the sodium lamp automatic color temperature tracking mode. The camera automatically achieves an optimal white balance under the sodium lamp. The , follow the steps below to adjust the white balance. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH
  • Panasonic WVCF344 | WVCF344 User Guide - Page 14
    balance The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC). Follow the procedures below. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC
  • Panasonic WVCF344 | WVCF344 User Guide - Page 15
    [SET ] button. 7 Digital noise reduction function setting [DNR] The digital noise reduction function reduces noise black-and-white images when brightness (illuminance) around the camera is lower than approx. 0.1 lx. OFF (default): the CCD image sensor. • WV-CP344 and WV-CP354 cannot set the switching
  • Panasonic WVCF344 | WVCF344 User Guide - Page 16
    • The lens is partially covered or covered with a transparent item. • The photographic subjects before and after changing the camera direction are similar. • False detection may occur for approx. 1 minute after turning on the power, after completing settings in the SETUP menu, or after changing the
  • Panasonic WVCF344 | WVCF344 User Guide - Page 17
    Step 2 Move the cursor to "MASK SET" and press the [SET] button. → The "MASK SET" screen appears. "MOTION DET" screen **MOTION DET**(1) LEVEL DWELL TIME DISPLAY MODE ALARM ....I.. 20 - + 2S OFF MASK SET "MASK SET" screen RET TOP END In the masked area, no alarm will be issued even if a
  • Panasonic WVCF344 | WVCF344 User Guide - Page 18
    This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing the camera direction largely. Follow the procedure below. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF
  • Panasonic WVCF344 | WVCF344 User Guide - Page 19
    selection [SYNC] This unit supports the following 2 types of ZONE] When undesired portions in the camera shooting area (on the screen) exist i.e. right after turning on the power. "SYSTEM SETUP" screen **SYSTEM SETUP OFF LDC I...... 0 - + FOCUS MANUAL RET TOP END "ZONE NUMBER" screen
  • Panasonic WVCF344 | WVCF344 User Guide - Page 20
    setting [STABILIZER] Whether or not to enable the image stabilizer is determined. This function is effective for the case that the camera is installed at a place with slight shaking. ON: Enables the image stabilizer. OFF (default): Disables the image stabilizer. Important: • When "ON" is selected
  • Panasonic WVCF344 | WVCF344 User Guide - Page 21
    procedure below. "SYSTEM SETUP" screen **SYSTEM SETUP** SYNC INT PRIVACY ZONE OFF STABILIZER OFF EL-ZOOM ON UPSIDE-DOWN OFF LDC FOCUS I...... 0 - + MANUAL RET TOP END "EL-ZOOM" setting screen **EL-ZOOM** ZOOM PAN/TILT PUSH SET PUSH SET RET TOP END "ZOOM" setting screen **EL
  • Panasonic WVCF344 | WVCF344 User Guide - Page 22
    . F Focus setting [FOCUS] CF354 Sets the focus adjustment method and occurs due to secular change in the lens and installation environment or peripheral temperature change, the focus adjustment "MANUAL", press the [SET] button, and use the [RIGHT] or [LEFT] button to adjust the focus manually.
  • Panasonic WVCF344 | WVCF344 User Guide - Page 23
    SER. NO. XXXXXXXX RET TOP END G Chroma level adjustment [CHROMA GAIN] Use the [right] or [left] button to adjust the color density of the camera image. When the level indicator moves in the "+" direction, the color becomes thicker, and when the level indicator moves in the "-" direction, the color
  • Panasonic WVCF344 | WVCF344 User Guide - Page 24
    **SPECIAL SETUP** CHROMA GAIN I 160 AP GAIN I 32 PEDESTAL 15 HUE I 0 - + PIX OFF CAMERA RESET PUSH SW SER.NO. XXXXXXXX RET TOP END "PIX OFF" screen **PIX OFF** 1 2 3 4 (RCV) when using our decoder (e.g. WV-RC150). COAX (default): Select this setting when not using any receiver
  • Panasonic WVCF344 | WVCF344 User Guide - Page 25
    data of the registered pixel compensation points is not cleared. • To set whether to reset the camera, select "YES" or "NO" by using the [SET] button. To set with a controller, refer to the instruction manual of the controller. N Serial number viewing [SER.NO.] Displays the serial number of this
  • Panasonic WVCF344 | WVCF344 User Guide - Page 26
    Camera language selection [LANGUAGE SETUP] The language selection can be made on the "LANGUAGE SETUP" screen the following. JAPANESE/ENGLISH (default)/FRANÇAIS/ESPAÑOL/DEUTSCH/ITALIANO/PУCCKИЙ/ 中文 Note: • When the camera language is changed, the camera titles that have been set will disappear. 26
  • Panasonic WVCF344 | WVCF344 User Guide - Page 27
    function] Setting contents Black-and-white control (BW) OFF Black-and-white control (BW) AUTO Camera title (CAMERA ID) ON Camera title (CAMERA ID) OFF Electronic zoom ON Electronic zoom OFF Iris of lens (IRIS) OPEN Iris of lens (IRIS) CLOSE Electronic shutter (SHUTTER) ON Electronic shutter
  • Panasonic WVCF344 | WVCF344 User Guide - Page 28
    System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
This illustration represents WV-CF344.
Operating Instructions
Color CCTV Camera
Model No:
WV-CF354
WV-CF344