Panasonic WVSP302 WVSP302 User Guide

Panasonic WVSP302 Manual

Get Panasonic WVSP302 PDF manuals and user guides View all Panasonic WVSP302 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WVSP302 manual content summary:

  • Panasonic WVSP302 | WVSP302 User Guide - Page 1
    Instructions Network Camera Model No. WV-SP300 Series WV-SF330 Series WV-SP306 WV-SF336 WV-SP306 WV-SF336 (Lens is optional for WV-SP300 Series.) This manual covers the models: WV-SP300 Series (WV-SP306, WV-SP305, WV-SP302, WV-SP306E, WV-SP305E, WV-SP302E) and WV-SF330 Series (WV-SF336, WV
  • Panasonic WVSP302 | WVSP302 User Guide - Page 2
    CONTENTS Preface 4 About the user manuals 4 About notations 4 Trademarks and registered trademarks 4 Abbreviations 4 Viewer software 5 Monitor images on a PC 6 Monitor images from a single camera 6 About the "Live" page 8 Monitor images from multiple cameras 11 Record images on the SD
  • Panasonic WVSP302 | WVSP302 User Guide - Page 3
    86 Maintenance of the camera [Maintenance 87 Check the system log [System log 87 Upgrade the firmware [Upgrade 88 Reset the settings/Reboot the camera [Default reset 89 Viewing Help 90 Displaying the Help screen 90 About the displayed system log 91 Troubleshooting 93 Directory structure of
  • Panasonic WVSP302 | WVSP302 User Guide - Page 4
    the user manuals There are 2 sets of operating instructions as follows. • Installation Guide: Explains how to install and connect devices. The Installation Guide for WV-SP300 Series covers the models: WV-SP306, WV-SP305, WV-SP302, WV-SP306E, WV-SP305E, WV-SP302E. The Installation Guide for WV
  • Panasonic WVSP302 | WVSP302 User Guide - Page 5
    to install the viewer software "Network Camera View 4" to display images on a PC. This software can be installed directly from the camera or by double clicking "nwcv4setup.exe" on the CD-ROM provided, and then following the on-screen instructions. Important: • The default setting of "Automatic
  • Panasonic WVSP302 | WVSP302 User Guide - Page 6
    a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Step 1 Start up the web browser. Step 2 Enter the IP address designated using the Panasonic IP setup software in the address box of the browser. Example when entering an
  • Panasonic WVSP302 | WVSP302 User Guide - Page 7
    enhance the security, change the password for the user name "admin". It is recommended to change this password periodically. • When displaying multiple fps. • The refresh interval may become longer depending on a network environment, PC performance, photographic subject, access traffic, etc. <
  • Panasonic WVSP302 | WVSP302 User Guide - Page 8
    cameras can be displayed on a multi-screen by registering cameras size. [1280x960] button: SP306 SP305 SF336 SF335 The letters " 1280x960" will turn green and imag- es in the main area will be displayed in 1 280 x 960 (pixels). [800x600] button: SP302
  • Panasonic WVSP302 | WVSP302 User Guide - Page 9
    SP306 SP305 default camera title entered for "Camera title" on the [Basic] tab will be displayed. (☞ Page 26) !2 Alarm occurrence indication button (*2) This button will be displayed and will blink when an alarm has occurred. When this button is clicked, the alarm output terminal will be reset
  • Panasonic WVSP302 | WVSP302 User Guide - Page 10
    Middle/High) by moving the volume cursor . Note: • When a user is using the audio transmission func- tion with "Interactive(Half-duplex)" be displayed only when "Manual" is selected for "Save trigger" on the setup menu. (☞ Page 29) !8 Main area Images from the camera will be displayed in
  • Panasonic WVSP302 | WVSP302 User Guide - Page 11
    unavailable for imag- es from the Panasonic PTZ cameras. • When displaying images on a instructions when displaying on a 4-split screen. q w q To display images on a single screen, click the [Live] button. w Click a camera title. Live images from the camera corresponding to the clicked camera
  • Panasonic WVSP302 | WVSP302 User Guide - Page 12
    " page can be recorded on the SD memory card manually. This button is operable only when "Manual" is selected for "Save trigger" on the setup on the [SD memory card] tab and by logging in the camera to access images from the user authentication window. Step 3 Click the [Start] button to start
  • Panasonic WVSP302 | WVSP302 User Guide - Page 13
    SD memory card. When "Alarm input" or "Manual" is selected for "Save trigger", an alarm Panasonic device, such as the network disk recorder, is connected to the system. When "On" is selected for "Panasonic alarm protocol notification", the connected Panasonic device will be notified that the camera
  • Panasonic WVSP302 | WVSP302 User Guide - Page 14
    : • When using this function, set the user name and the password to access the FTP server to restrict users who can log into the FTP server. • tab of the "Alarm" page. (☞ Page 60) Note: • Depending on the network traffic, the number of the transmitted images may not reach the set number of imag
  • Panasonic WVSP302 | WVSP302 User Guide - Page 15
    can be obtained from the [SD memory card] tab of the "Basic" page. (☞ Page 28) To use the SD memory recording function featured in Panasonic's network disk recorder, select "Off" for "FTP periodic image transmission" (☞ page 83) and "FTP error" for "Save trigger" (☞ page 29). We make no guarantee
  • Panasonic WVSP302 | WVSP302 User Guide - Page 16
    respectively. Step 1 Display the "Live" page. (☞ Page 6) Important: • Only a single user can operate the log list window. Other users cannot access the log list window. Note: • When "Not use" is selected for "SD memory card", the "Manual log" list and the "FTP trans. error log" list will not
  • Panasonic WVSP302 | WVSP302 User Guide - Page 17
    follows. Alarm log: Alarm occurrence time and date will be filed as a log. Manual log: Time and date when recording of images onto the SD memory card started Do not turn off the power of the camera until the deletion is complete. When the power of the camera is turned off in the process of the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 18
    Playback of images on the SD memory card When clicking a time and date listed on the log list window, the "Live" page will turn to the "Playback" page. When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed. Important: • This
  • Panasonic WVSP302 | WVSP302 User Guide - Page 19
    . In this case, images already downloaded before clicking the [Cancel] button will be saved on the PC. [Browse] button When successfully logged in after the user authentication process, a folder on the SD memory card in which images are saved will be displayed. (☞ Page 32) 19
  • Panasonic WVSP302 | WVSP302 User Guide - Page 20
    format" of the SD memory card Important: • Depending on the network environment, download of video data may fail. To play back video data are not liable for performance relating to these applications. * The supported operating system is Microsoft® Windows® 7 only. QuickTime is a trademark
  • Panasonic WVSP302 | WVSP302 User Guide - Page 21
    the network security Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user
  • Panasonic WVSP302 | WVSP302 User Guide - Page 22
    The settings of the camera can be configured on the setup menu. Important: • The setup menu is only operable by users whose access level is window with the user name and password entry fields will be displayed. Step 3 Click the [OK] button after entering the user name and the password. → The
  • Panasonic WVSP302 | WVSP302 User Guide - Page 23
    How to operate the setup menu Important: • When there are two or more [Set] and [Execute] but- tons on the page, click the respective button to the edited setting item. A A-1 Menu buttons Setup page Step 1 Click the desired button in the frame on the left of the window to display
  • Panasonic WVSP302 | WVSP302 User Guide - Page 24
    on the "User mng." page. (☞ Page 71) i [Server] button Displays the "Server" page. The settings relating to the mail server, the FTP server and the NTP server to which the camera accesses can be configured on the "Serve" page. (☞ Page 74) o [Network] button Displays the "Network" page. The
  • Panasonic WVSP302 | WVSP302 User Guide - Page 25
    [Maintenance] button Displays the "Maintenance" page. System log check, firmware upgrade and initialization of the setup menu can be carried out on page. (☞ Page 90) !3 Status display area The title of the camera whose settings are currently being configured will be displayed. !4 Setup page
  • Panasonic WVSP302 | WVSP302 User Guide - Page 26
    after entering the title of the camera. The entered title will be displayed in the status display area. Available number of characters: 0 - 20 characters Default: Varies as follows depending on the model in use. WV-SP306 WV-SP305 WV-SP302 WV-SF336 WV-SF335 WV-SF332 [Date/time] Enter the current
  • Panasonic WVSP302 | WVSP302 User Guide - Page 27
    camera. On: Installs the viewer software from the camera auto- matically. Off: The viewer software cannot be installed from the camera. Default: On Important: • It is impossible to display images and to receive/ transmit audio between the camera and the PC when the viewer software "Network Camera
  • Panasonic WVSP302 | WVSP302 User Guide - Page 28
    user is during operation, the operation will be canceled. • Before removing the SD memory card from the camera Audio will not be recorded. Default: JPEG Note: • When "H.264 User mng." page, the priority band may not be maintained. • When using the SD memory recording function of a Panasonic's network
  • Panasonic WVSP302 | WVSP302 User Guide - Page 29
    of "H.264(2)" on the [JPEG/H.264] tab of the "Camera" page are unavailable. • When "H.264" is selected for " the mail notification function or the Panasonic alarm protocol function is used to Saves images at an alarm occurrence. Manual: Saves images manually. Default: FTP error Note: • When
  • Panasonic WVSP302 | WVSP302 User Guide - Page 30
    following. 0.1fps/0.2fps/0.33fps/0.5fps/1fps Default: 1fps [Image saving interval/Number of "Save trigger". [Image capture size] When "Manual" is selected for "Save trigger" and "JPEG [FTP img. trans.] tab of the "Network" page. • When "H.264" is selected SP306 *2 SP302 SP305 SF332 SF336 SF335 30
  • Panasonic WVSP302 | WVSP302 User Guide - Page 31
    2s/0.33s/0.5s/1s Default: 1s ■ SD manual logs, the FTP error logs and the system logs • Save/obtain images recorded using the SD memory recording function of Panasonic's network disk recorder. • Play/download images on the SD memory card • When an SD memory card is formatted while another user
  • Panasonic WVSP302 | WVSP302 User Guide - Page 32
    since the default directory is automatically created in the SD memory card. • Recommended SD memory card Manufactured by Panasonic (option) to camera" on the [Network] tab of the "Network" page. (☞ Page 79) Important: • It may sometimes be impossible to operate when another user is accessing
  • Panasonic WVSP302 | WVSP302 User Guide - Page 33
    Possible number of images that can be saved on the SD memory card (as indications) For JPEG images Important: • The numbers on the following table are just indications. They are not actual numbers of images that can be saved on the SD memory card. Numbers will differ according to photographic
  • Panasonic WVSP302 | WVSP302 User Guide - Page 34
    Image capture size: 800x600 Capacity of SD/ SDHC memory card 32 GB 16 GB 8 GB 4 GB 2 GB 1 GB 512 MB 256 MB 0(Super fine) Approx. 102 400 pics Approx. 51 200 pics Approx. 25 600 pics Approx. 12 800 pics Approx. 6 400 pics Approx. 3 200 pics Approx. 1 600 pics Approx. 800 pics 1(Fine) Approx. 160
  • Panasonic WVSP302 | WVSP302 User Guide - Page 35
    Image capture size: 640x360 Capacity of SD/ SDHC memory card 32 GB 16 GB 8 GB 4 GB 2 GB 1 GB 512 MB 256 MB 0(Super fine) Approx. 192 000 pics Approx. 96 000 pics Approx. 48 000 pics Approx. 24 000 pics Approx. 12 000 pics Approx. 6 000 pics Approx. 3 000 pics Approx. 1 500 pics 1(Fine) Approx.
  • Panasonic WVSP302 | WVSP302 User Guide - Page 36
    Image capture size: 320x180 Capacity of SD/ SDHC memory card 32 GB 16 GB 8 GB 4 GB 2 GB 1 GB 512 MB 256 MB 0(Super fine) Approx. 460 800 pics Approx. 230 400 pics Approx. 115 200 pics Approx. 57 600 pics Approx. 28 800 pics Approx. 14 400 pics Approx. 7 200 pics Approx. 3 600 pics 1(Fine) Approx.
  • Panasonic WVSP302 | WVSP302 User Guide - Page 37
    will not be saved. Default: On Important: • When "Name w/o time&date" is selected for "File name" on the [FTP img. trans.] tab on the "Network" page, FTP error log (\), the colon (:) and the underscore (_). ■ Manual Configure the settings relating to manual saving of the log list. Select "On" or
  • Panasonic WVSP302 | WVSP302 User Guide - Page 38
    logs will be overwritten by the newer logs. In this case, the oldest log is the first to be - overwritten. When the power of the camera is turned off, logs will be deleted. Images: Will not be saved. Logs: Will not be saved. Images: Will be saved. When available capacity of
  • Panasonic WVSP302 | WVSP302 User Guide - Page 39
    kept on being saved until number of filed logs reaches 5 000. Other than "Manual" Logs: Will not be saved. - Images: Will not be saved. Logs: Will it is nec- essary to copy them onto the PC first. (☞ Page 32) Manual Use Logs: Will not be saved. Images: Will be saved. When available
  • Panasonic WVSP302 | WVSP302 User Guide - Page 40
    How the logs and images are saved depending on the settings for "FTP error" [Log] tab [SD memory card] tab FTP error: Save logs SD memory card Save trigger FTP error Use On Not use Other than "FTP error" - FTP error Use Off Other than "FTP error" Not use - Logs and associated images
  • Panasonic WVSP302 | WVSP302 User Guide - Page 41
    Unless otherwise described, other Panasonic i-PRO Series products do not support the aspect ratio of Default: 1280 x 960 *1 VGA *2 [Image quality] Select image quality of JPEG images from the following. 0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low Default: 5 Normal *1 SP306 *2 SP302 SP305
  • Panasonic WVSP302 | WVSP302 User Guide - Page 42
    the video encoding format. The subsequent setting items will be for MPEG-4. (☞ Page 46) The tab name will be changed to [JPEG/MPEG-4]. Default: H.264 ■ H.264(1) · H.264(2) [H.264 transmission] Select "On" or "Off" to determine whether or not to transmit H.264 images. On: Transmits H.264 images. Off
  • Panasonic WVSP302 | WVSP302 User Guide - Page 43
    When "8192 kbps *" or "Unlimited *" is selected, the number of users who can access H.264 images will be limited to "1". (Only a single user can access H.264 images.) • It is impossible to select "Unlimited *" for both "H.264(1)" and "H.264(2)". *1 SP306 *2 SP302 SP305 SF332 SF336 SF335 43
  • Panasonic WVSP302 | WVSP302 User Guide - Page 44
    . If using under a network environment with frequent error occurrences MANUAL)" (☞ page 80). Refer to the operating instructions of the router in use. Multicast: Unlimited number of users can access a single camera Default: H.264(1): 239.192.0.20 H.264(2): 239.192.0.21 Note: • Enter a multicast IP
  • Panasonic WVSP302 | WVSP302 User Guide - Page 45
    cards are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying images using the multicast port. *3 It is necessary to designate the unicast port number when "Unicast port (MANUAL)" is selected for "Transmission type". *4 It is
  • Panasonic WVSP302 | WVSP302 User Guide - Page 46
    "On" or "Off" to determine whether or not to transmit MPEG-4 images. On: Transmits MPEG-4 images. Off: Does not transmit MPEG-4 images. Default: On Important: • When "16:9" is selected for "Aspect ratio", MPEG-4 transmission is unavailable. • When "H.264" is selected for "Recording format", MPEG
  • Panasonic WVSP302 | WVSP302 User Guide - Page 47
    rate*". Default: Constant bit rate Note: When "Frame rate" is set for "Transmission priority", number of users who can access the camera may be -4 bit rate is synchronized with "Bandwidth control(bit rate)" on the [Network] tab of "Network" page (☞ page 79). For this reason, the bit rate may be
  • Panasonic WVSP302 | WVSP302 User Guide - Page 48
    MANUAL)" (☞ page 80). Refer to the operating instructions of the router in use. Multicast: Unlimited number of users can access a single camera starting with "FF" Default: MPEG-4(1): 239.192.0.20 MPEG-4(2): 239.192.0.21 Note: • Enter a multicast IP address after checking available multicast
  • Panasonic WVSP302 | WVSP302 User Guide - Page 49
    menu that can configure the settings relating to image quality. The setup menu will be displayed in a newly opened window. (☞ Page 50) [Focus] SP306 SF336 Click the [Setup >>] button to display the setup menu that can configure the settings relating to focus. The setup menu will be displayed
  • Panasonic WVSP302 | WVSP302 User Guide - Page 50
    accordance with the illuminance level around the face. Off: Face WDR will not work. Default: Off [Wide dynamic range (WDR)] Select "On" or "Off" to determine function can make darker parts of images brighter by digital image processing. On: Activates the darkness compensation function. Off:
  • Panasonic WVSP302 | WVSP302 User Guide - Page 51
    . Off: Mask areas will not be set automatically. It is nec- essary to set them manually. Default: Off shutter speed. 1/30 fix, 3/100 fix, 3/120 fix, 2/100 fix, 2/120 where the camera is in use. ELC: SP306  SP305 SP302 This selection is suitable for use of a lens with fixed iris or manual iris. Fix
  • Panasonic WVSP302 | WVSP302 User Guide - Page 52
    (illumi- nance) of the camera is approx.0.1 lx or less. Default: Auto1(Normal) SP306 Off  SP305 SP302 SF336 SF335 SF332 Note: direction, the red color will be thinner. Click the [Reset] button to reset the color to the default. Default: 128 [Blue gain] Adjust the blue color of images.
  • Panasonic WVSP302 | WVSP302 User Guide - Page 53
    or "High" for the digital noise reduction. High: High DNR, afterimage remains Low: Low DNR, reduces afterimage Default: High [Chroma gain cursor is moved in the "-" direction. Click the [Reset] button to reset the level to the default. Default: 16 [Pedestal level] Adjust the black level of images
  • Panasonic WVSP302 | WVSP302 User Guide - Page 54
    ratio Image in the aspect ratio of "16:9" (Being cut out from the aspect ratio of 4:3) Image in the aspect ratio of "4:3" Note: • When the [Reset] button is clicked, masking for all the masked areas will be canceled. 54
  • Panasonic WVSP302 | WVSP302 User Guide - Page 55
    ] The focus can be adjusted manually. [Near] button: Click this button to adjust the focus to the "Near" side. [Reset] button: Click this button to reset the focus to the default. [Far] button: Click this button to adjust the focus to the "Far" side. [Adjusting method] SP306 Select the back focus
  • Panasonic WVSP302 | WVSP302 User Guide - Page 56
    a display type of the privacy zone from the following. Gray: The privacy zones will be displayed in gray. Off: Does not display the privacy zones. Default: Off Note: • Set the privacy zone larger than the size of an object to be hidden. [Close] button Click this button to close the "Privacy
  • Panasonic WVSP302 | WVSP302 User Guide - Page 57
    always match. • Audio may be interrupted depending on the network environment. • When "Multicast" is selected for "Transmission camera using the Line input. Line Low: The volume level will become low. This setting will be applied when audio is input to the camera using the Line input. Default
  • Panasonic WVSP302 | WVSP302 User Guide - Page 58
    are available.) Default: 34 004 Note: • The transmission port number entered for "Audio output port (PC to Camera)" will be used only when "Unicast port (MANUAL)" is selected the network environment. • Audio may temporarily be interrupted or noise may be heard the camera, or when multiple users are
  • Panasonic WVSP302 | WVSP302 User Guide - Page 59
    "16:9" is selected for "Aspect ratio", the multi-screen is displayed in 4:3. [IP address] Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. When the HTTP port number for the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 60
    black & white mode is activated.) SP306 Off: Not used. Default: Off Note: • Refer to the installation guide for further information about input/output terminals Panasonic protocol alarm from the other cameras. When "On" is selected, alarm actions will be performed between multiple cameras. Default:
  • Panasonic WVSP302 | WVSP302 User Guide - Page 61
    Depending on the network line speed or the network traffic, images may not be transmitted at the exact desig- nated interval or period. • When "Alarm input" or "Manual" is selected for /640 x 360/1280 x 720 *1 320 x 180/640 x 360 *2 Default: VGA *1 SP306 *2 SP302 SP305 SF332 SF336 SF335 61
  • Panasonic WVSP302 | WVSP302 User Guide - Page 62
    Off: Does not change the image quality upon alarm detection. Default: Off [Image quality upon alarm detection] Image quality can be . 1 MB image data is always saved during the pre alarm recording. Use/Not use Default: Not use Important To record H.264 data, it is required to select "Use" for
  • Panasonic WVSP302 | WVSP302 User Guide - Page 63
    . Available range: 1 - 120sec Default: 1sec ■ Alarm output terminal setup output terminal when an alarm is detected. Default: Off [Alarm output type] Select "Latch period set for "Pulse width". Default: Latch [Trigger output] Select "Open signals. (Normally open) Default: Close Note: • When "Open
  • Panasonic WVSP302 | WVSP302 User Guide - Page 64
    )] Enter the name for "Open" of "AUX" on the "Live" page. Default: Open [Close (Up to 5 characters)] Enter the name for "Close" of "AUX" on the "Live" page. Default: Close Note: • AUX is a camera terminal that allows users to oper- ate (Open/Close) arbitrarily from the "Live" page. For example
  • Panasonic WVSP302 | WVSP302 User Guide - Page 65
    input of a terminal alarm or a command alarm. • Depending on the network environment, notification may be delayed even when "Real time" is selected for value (1-10) will be displayed on the right of the slider. Default: 1 [Detection sensitivity] Adjust the sensitivity of motion detection in the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 66
    to image data. The VMD information can be searched by Panasonic network disk recorders (WJ-ND400 series). Refer to the operating instructions of the connected devices for further information about the functions and settings. Default: Off Set the VMD areas Important: • When the settings are
  • Panasonic WVSP302 | WVSP302 User Guide - Page 67
    become full ("Diag.") • When the SD memory card cannot be recognized ("Diag.") Default: Off [Alarm image attachment] Select "On" or "Off" to determine whether an image to the mail to be sent when an alarm is detected. Default: Off ■ Destination of notification [Address 1] - [Address 4] Enter the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 68
    .") • When the SD memory card has become full ("Diag.") • When the SD memory card cannot be recognized ("Diag.") Default: Off ■ Destination of notification [Address 1] - [Address 8] Enter the destination IP address of the Panasonic alarm protocol from the following. Host name is unavailable for the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 69
    information in the XML format. ■ XML notification [XML notification] Select "On" or "Off" to determine whether or not to notify face detection information using XML. Default: Off [Notification interval] Select "1s" or "2s" for the notification interval
  • Panasonic WVSP302 | WVSP302 User Guide - Page 70
    [Destination 1] [Destination 2] [Destination address] Configure the IP address or host name of the destination for XML notification of face detection. [User name] Enter a user name. Available number of characters: 0 - 32 characters Default: None (blank) [Password] Enter a password. Available number
  • Panasonic WVSP302 | WVSP302 User Guide - Page 71
    about the face detection frame will not be attached. No face detection frame will be displayed on the image of this page. Default: Off [XML notification] The destination settings of the face detection information can be configured. When clicking "XML notification", the [XML notification] tab
  • Panasonic WVSP302 | WVSP302 User Guide - Page 72
    IP address (PC), access to the camera will be denied for a while. [User auth.] Select "On" or "Off" to determine whether or not to authenticate the users. Default: Off [User name] Enter a user name. Available number of characters: 1 - 32 characters Default: None (blank) [Password] [Retype password
  • Panasonic WVSP302 | WVSP302 User Guide - Page 73
    "On" or "Off" to determine whether or not to authenticate the host. Default: Off [IP address] Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP address. Note: • When "IP address/subnet mask" is entered, it is possible to restrict PCs in each
  • Panasonic WVSP302 | WVSP302 User Guide - Page 74
    users who can access the camera will be limited. [Destination IP address(1)] Enter the first destination IP address. [Destination IP address(2)] Enter the second destination IP *1 320 x 180/640 x 360 *2 Default: 1 280 x 960 *1 VGA *2 *1 SP306 *2 SP302 SP305 SF332 SF336 SF335 Note: • When "H.264
  • Panasonic WVSP302 | WVSP302 User Guide - Page 75
    User name Default: 25 Enter the user name to access the server. Available number of characters: 0 - 32 characters [POP server address] When "POP before SMTP" is selected for "Type", enter • Password the IP configure the DNS settings on the [Network] tab of the "Network" page. (☞ Page 79) [
  • Panasonic WVSP302 | WVSP302 User Guide - Page 76
    after selecting "Active". Default: Passive [FTP server address] Enter the IP address or the host Network] tab of the "Network" page. (☞ page 79) [User name] Enter the user name (login name) to access the FTP server. Available number of characters: 1 - 32 characters [Password] Enter the password
  • Panasonic WVSP302 | WVSP302 User Guide - Page 77
    . Default: Manual [Time zone] Select a time zone corresponding to the location where the camera is in use. Default: (GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London [NTP server address] Enter the IP address or the host name of the NTP server. Available number of characters: 1 - 128
  • Panasonic WVSP302 | WVSP302 User Guide - Page 78
    the DHCP server not to assign the same IP addresses used for the other network cameras and PCs whose IP address is unique. Refer to the network administrator for further information about the settings of the server. Default: Off [Default gateway] When not using the DHCP function, enter
  • Panasonic WVSP302 | WVSP302 User Guide - Page 79
    manually configure the IP address for IPv6 network (IPv6 address). On: Enter an IPv6 address manually. Off: Manual entry of an IPv6 address will become unavailable. Default: Off [IP address(IPv6)] When "On" is selected for "Manual", manual . Refer to the operating instructions of the router in use
  • Panasonic WVSP302 | WVSP302 User Guide - Page 80
    using the Panasonic IP setting software can be allowed. 20min: The network setting operation using the Panasonic IP setting software is allowed for 20 minutes. Unlimited: The network setting operation using the Panasonic IP setting software is allowed without time limitation. Default: 20min Note
  • Panasonic WVSP302 | WVSP302 User Guide - Page 81
    to DDNS [DDNS] Click the [DDNS] tab on the "Network" page. (☞ Pages 22 and 23: How to display/operate Default: None (blank) [User name] Enter the user name (login name) to access the DDNS server. Available number of characters: 1 - 32 characters Default: None (blank) [Password] Enter the password
  • Panasonic WVSP302 | WVSP302 User Guide - Page 82
    Available number of characters: 0 - 32 characters Default: None (blank) [Location] Enter the name of the location where the camera is installed. Available number of characters: 0 - 32 characters Default: None (blank) [Contact] Enter the mail address or the phone number of the SNMP manager. Available
  • Panasonic WVSP302 | WVSP302 User Guide - Page 83
    network line speed or the network traffic, images may not be transmitted at the exact desig- nated interval or period. • When "Alarm input" or "Manual" necessary to configure the settings of the FTP server. (☞ Page 76) Default: Off [Directory name] Enter the directory name where the images are to
  • Panasonic WVSP302 | WVSP302 User Guide - Page 84
    x 180/640 x 360 *2 Default: VGA *1 SP306 *2 SP302 SP305 SF332 SF336 SF335 Configure the schedule settings of the FTP periodic image transmission [FTP img. trans.] Click the [FTP img. trans.] tab on the "Network
  • Panasonic WVSP302 | WVSP302 User Guide - Page 85
    How to delete the set schedule Step 1 Uncheck the check box of the set day of the week. Step 2 Click the [Set] button after completing the settings. → The schedule of the selected day of the week is deleted. 85
  • Panasonic WVSP302 | WVSP302 User Guide - Page 86
    [User auth.] tab of "User mng." page (☞ page 72) can access the camera only in the period of schedule. Note: • Select "On" for "User auth." on the [User auth.] tab of "User the schedule from "Schedule mode". "Off" is selected at the default. Off: No action will be taken for the respective schedule.
  • Panasonic WVSP302 | WVSP302 User Guide - Page 87
    Maintenance of the camera [Maintenance] System log check, firmware upgrade, and initialization of the setup menu can be performed on this page. The "Maintenance" page has 3 tabs; the [System log] tab, the [Upgrade] tab and the [Default reset] tab. Check the system log [System log] Click the [System
  • Panasonic WVSP302 | WVSP302 User Guide - Page 88
    when upgrading the firmware after selecting "Reset the settings to the default after completing the upgrade. (Except the network settings)". On/Off for DHCP, IP address, subnet mask, default gateway, HTTP port, line speed, bandwidth control (bit rate), time & date • The viewer software used on each
  • Panasonic WVSP302 | WVSP302 User Guide - Page 89
    camera. [Reset to the default (Except the network settings)] Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset. It is impossible to operate the camera power. • The notification function allows users to provide the notification of the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 90
    Viewing Help If you want to know anything about operation or setup methods on screen, display the "Help" screen. Displaying the Help screen S t ep 1 Click the [Setup] button. → The setup screen is displayed. Step 3 When clicking an item, descriptions corresponding to the clicked item will be
  • Panasonic WVSP302 | WVSP302 User Guide - Page 91
    the server is configured correctly. • The POP3 server may be down. Ask the network administrator. • Entered user name or password may be incorrect. Check if the mail settings are configured correctly. • The designated IP address of the DNS may be incorrect. Check if the DNS settings are configured
  • Panasonic WVSP302 | WVSP302 User Guide - Page 92
    . • The DDNS server may be down. Ask the network administrator. • Entered user name or password may be incorrect. Check if the DDNS settings are configured correctly. • IP address update error occurred in the DDNS server. Ask the network administrator. • An error occurred in the DDNS function
  • Panasonic WVSP302 | WVSP302 User Guide - Page 93
    . • Reboot the camera and change the IP address by using the Panasonic IP setup software within 20 minutes after the restart. • Reboot the camera while holding the [INITIAL SET] button on the camera. The camera will be initialized and the IP address will return to the default setting "192.168
  • Panasonic WVSP302 | WVSP302 User Guide - Page 94
    access to camera" on the [Network] tab of the "Network" page. • Is the entered password correct? Restart the web browser and enter the password 72 again. • Access to the SD memory card may be failed. Restart the browser and retry to obtain images. - • Is the viewer software installed on
  • Panasonic WVSP302 | WVSP302 User Guide - Page 95
    might be difficulties refreshing the picture, etc. Installation Guide • Depending on the traffic of the network or the concen- tration of access to the camera, there might be diffi- culties displaying the camera picture. Request the - camera picture using the browser such as by pressing the
  • Panasonic WVSP302 | WVSP302 User Guide - Page 96
    camera. SP306 or the "Panasonic alarm protocol" viewer software "Network Camera View4" is installed. • Is the viewer software installed on the PC? Confirm that the viewer software "Network Camera View4" is installed. • Is "Real time" selected for "Alarm status update mode"? Installation Guide
  • Panasonic WVSP302 | WVSP302 User Guide - Page 97
    indicator" on the "Basic" page? Select "On" for "Link/Access indica- 27 tor". • When "Network Camera View4" is deleted from a PC on which both the viewer software "Network Camera View3" and "Network Camera View4" are installed, H.264 (or MPEG-4) images may not be displayed. 5 In this case
  • Panasonic WVSP302 | WVSP302 User Guide - Page 98
    browser windows, images from two or more cameras are displayed in sequence on a single . If updating the driver does not solve the problem, adjust the hardware acceleration as follows. The following Advanced] button. (3) Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting
  • Panasonic WVSP302 | WVSP302 User Guide - Page 99
    on the PC, the following may occur. Follow the instructions below when the following has occurred. By performing the following "This site might require the following ActiveX control 'nwcv4setup.exe' from 'Panasonic System Networks Co., Ltd.'. Click here to install..." An unnecessary status bar or
  • Panasonic WVSP302 | WVSP302 User Guide - Page 100
    Symptom Images are not fit in the frames. Cause/solution • When "120 DPI" is not selected for "DPI setting", they may not be displayed correctly. Click the [Settings] tab on the "Properties" window of "Screen" (in the control panel), and then click the [Advanced] button. Change the "DPI setting"
  • Panasonic WVSP302 | WVSP302 User Guide - Page 101
    .jpg) LOCAL 00000000 10010112.01 10010112.02 File name.01 PULL Destination where images are to be saved by the SD memory recording function of Panasonic network disk recorder LOG M_ALARM 10000001 10000501 M_LOCAL 10000001 10000501 101
  • Panasonic WVSP302 | WVSP302 User Guide - Page 102
    For U.S. and Canadian fields: Panasonic System Networks Company of America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Operating Instructions
Network Camera
Model No.
WV-SP300 Series
WV-SF330 Series
(Lens is optional for WV-SP300 Series.)
WV-SP306
WV-SF336
WV-SF336
WV-SP306
This manual covers the models: WV-SP300 Series (WV-SP306, WV-SP305, WV-SP302, WV-SP306E,
WV-SP305E, WV-SP302E) and WV-SF330 Series (WV-SF336, WV-SF335, WV-SF332, WV-SF336E,
WV-SF335E, WV-SF332E).