Paradigm PW 600 Ios Quick Start Guide For Premium Wireless Series

• A modem/WIRELESS router

combination

• High-Speed DSL/Cable

model or fibre-to-the-home

broadband connection for

reliable playback of music

services.

• Ensure that the network you

are trying to connect to is NOT

hidden.

1.

PRESS and HOLD

the Wi-Fi button on the rear of your Paradigm Product for

4 seconds

or until you hear a tone. The wireless LED will blink twice in continuous intervals.

2. Now press the WPS button on your router.

3. Your Paradigm product is connected to your network when the wireless LED is solid.

DOWNLOAD THE FREE DTS PLAY-FI APP FROM THE APPLE STORE

1. Connect your mobile device to the same wireless network that you want to connect

your Paradigm product.

2. Launch the DTS Play-Fi app. Upon launching the app, it will automatically detect the

Paradigm product connected to the your Wireless network and prompt you to name

your device with one of our pre-set names, or create your own name.


1. The app will prompt you that a new device is ready for setup. Click on the screen to

direct you to setup instructions.

2. Exit the app and access your settings on your iOS device

3. Select Wi-Fi in your settings. Ensure that Wi-Fi is enabled on your device. Once the

Wi-Fi is enabled, select the listed device with “Play-Fi” in the name.

4. Once your device is selected, exit the settings menu and re-enter the DTS Play-fi

app. To choose your wireless network (you may be asked to enter your WIRELESS

NETWORK PASSWORD).

5. Once your device is connected, you will notice that the Wireless Indicator on your

Paradigm product will change from blinking to solid illumination

6. Your device is now connected. You may re-name your device with one of our pre-set

names, or create your own name.


1. Unplug the Paradigm PW product from the power outlet.

2. Using the supplied ethernet cable, connect your Paradigm product to your router.

3. Plug the Paradigm PW product into the wall outlet and press the power button; an

audible tone will indicate power on.

4. 10-seconds later the wireless indicator will start rapidly flashing for 20 seconds; this

indicates your Paradigm product is booting up.

5. Once the Wireless Indicator switches off, the Paradigm product is connected to your

network.

6. Connect your mobile device to the same wireless network that you want to connect

your Paradigm product.

7. Launch the DTS Play-Fi app. Upon launching the app, it will automatically detect the

Paradigm product connected to the your Wireless network and prompt you to name

your device with one of our pre-set names, or create your own name.

1

3a

3b

3c

IF YOUR ROUTER HAS A WPS BUTTON*

NETWORK REQUIREMENTS

IF YOUR ROUTER DOES NOT HAVE A WPS BUTTON

WIRED (Ethernet) SETUP

SETUP FOR iOS DEVICE USERS

1. Place your Paradigm product close to

your router. You can move it to a new

location later.

2. Plug-in your Paradigm product and

press the

POWER BUTTON

.

A tone

sounds confirming power on.

3. Within 10 seconds, the wireless LED will

rapidly flash for

20 seconds

, confirming

your unit is booting up.

4. When the wireless LED pulses slowly,

your Paradigm product is ready to

connect to your wireless network.

NOTE: if the wireless LED does not pulse

slowly, PRESS and HOLD the Wi-Fi button

on the rear of your Paradigm product for

8 seconds or until you hear two tones.

2

GENERAL SETUP

*IF YOU’RE USING A MAC ROUTER

1. Locate “Utilities” on your Apple computer.

2. Double-click “Airport Utility” app.

3. On the toolbar at top of screen select

“Base Station” and on the drop down

menu select “Add WPS Device...”

4. Select your Play-Fi device from the list of

found base stations.

DEVICE TYPE

Apple iOS

APP

Play-Fi

WHAT CAN I PLAY?

• iTunes stored on device

• Subscripton-based music

services

HOW MANY PARADIGM

PRODUCTS CAN I USE?

Up to 8 Speakers. Multiple

simultaneous users stored

on a home server

PARADIGM PREMIUM

WIRELESS SERIES

DEVICE GUIDE

Visit paradigm.com to view a

video of this setup and how

to setup additional Paradigm

products in other rooms.

Note: To use ARC™ with

a MAC, you must have

Microsoft

Windows installed

via Bootcamp or other VM.

NOTE: FOR BEST RESULTS,

WAIT UNTIL YOUR PARADIGM

PW PRODUCT HAS BEEN IN

WIFI SEARCH MODE FOR

10±15 SECONDS BEFORE

LAUNCHING THE PLAY FI APP.

1. Launch the DTS Play-Fi app.

2. Select which Paradigm product you wish to be the primary; this prompt will only be displayed

if multiple devices are on the network.

3. The app will now indicate which is primary and which are the extended speakers.

4. Select the album or song you wish to listen to.

5. The app will now display the song selected.

6. Pushing the DTS Play-Fi logo in the bottom hand corner of the any window will display the

speakers menu.

7. To configure speaker zones, select the 3 ‘blue bars’ on the top right hand side or swipe from

left to right on the screen.

8. To add another zone, simply select the zone you wish to configure.

9. Select the speakers you wish to use in this zone.

10.If the speaker you wish to use is already in use you can take control by selecting the speaker

from the list.

4

PLAY MUSIC FROM DTS PLAY±FI APP (stream to 8 Paradigm products)

09.18.15

Paradigm PW 600 Ios Quick Start Guide For Premium Wireless Series

Paradigm PW 600 Manual

Paradigm PW 600 manual content summary: