Pentair High Flow Whole House Water Filter 35 GPM PC1354 IAPMO Certified to NS

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a

combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the

supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in

the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product

acceptance by Authorities Having Jurisdiction.

This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,

manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of

non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.

Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.

Any alteration of this certificate could be grounds for revocation of the listing.

This document shall be reproduced in its entirety.

This certificate is not evidence of current listing. To verify listing status, visit the IAPMO R&T

Product Listing Directory at pld.iapmo.org

Effective Date:

February 2019

Void After: February 2024

Product:

Drinking Water Treatment Unit - Aesthetic

Effects

File No. W-10918

Issued To:

Pelican Water Systems

3060 Performance Circle Ste. 2

Deland, FL 32724

Identification:

Each product shall be permanently and legibly marked by means of a permanent

plate(s) or label(s) affixed in a readily accessible location to the system.

This information shall include the model number, name and address of

manufacturer, functional description of the system, maximum working pressure

in kPa (psig), maximum operating temperature in degrees C (degrees F), and a

statement noting that the system conforms to NSF/ANSI 42 for the specific

performance claims

as verified and substantiated by test data.

Where applicable and

appropriate, the information shall also include the model number of

replacement components, electrical requirements, and a statement (or its

equivalence) for activated carbon systems: "Do not use with water that is

microbiologically unsafe or of unknown quality without adequate disinfection

before or after the system."

Product shall also bear the UPC® certification mark.

Characteristics:

Point-of-use and point-of-entry systems intended to reduce substances