Pentair MasterTemp High Performance Pool and Spa Heaters Auto By-Pass Valve Ki
Pentair MasterTemp High Performance Pool and Spa Heaters Manual
View all Pentair MasterTemp High Performance Pool and Spa Heaters manuals
Add to My Manuals
Save this manual to your list of manuals |
Pentair MasterTemp High Performance Pool and Spa Heaters manual content summary:
- Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 1
DEATH. THIS PRODUCT SHOULD BE INSTALLED AND SERVICED ONLY BY A QUALIFIED POOL SERVICE PROFESSIONAL. INSTALLERS, POOL OPERATORS AND OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS IN THE HEATER INSTALLATION AND USER'S GUIDE BEFORE USING THIS PRODUCT. THESE INSTRUCTIONS MUST BE LEFT WITH THE POOL - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 2
When installing this kit, basic safety precautions should always be followed. Read and follow all instructions. Required installation tools: • #2 Phillips screwdriver • Hacksaw (for cutting plumbing) • 1/4" Nut driver CAUTION! Before starting: Always disconnect AC power to the pool pump - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 3
AUTOMATIC BY-PASS VALVE SETUP INSTRUCTIONS 4. Remove the four (4) screws from the valve assembly top cover. See Figures 4 and 5 depending on where your heater is located relative to your valve. Figure 4. Heater to Left of Valve Figure 5. Heater to Right of Valve 3 - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 4
AUTOMATIC BY-PASS VALVE SETUP INSTRUCTIONS Mount the IntelliValve Valve Actuator onto the Valve Note: Similar to a standard actuator, the IntelliValve® Valve Actuator factory default diverter end point positions are 0 and - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 5
AUTOMATIC BY-PASS VALVE SETUP INSTRUCTIONS Setting Home and End Positions (For installations where the end point will remain on. 5. The START and end points are now established and the MODE changes to Service (Yellow LED on). 6. Press and release the MODE button and the AUTO LED (Green) turns on - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 6
AUTOMATIC BY-PASS VALVE SETUP INSTRUCTIONS Setting Home and End Positions (For installations where the end point will remain on. 5. The START and end points are now established and the MODE changes to Service (Yellow LED on). 6. Press and release the MODE button and the AUTO LED (Green) turns on - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 7
Notes 7 - Pentair MasterTemp High Performance Pool and Spa Heaters | Auto By-Pass Valve Ki - Page 8
1620 HAWKINS AVE., SANFORD, NC 27330 • (919) 566-8000 10951 WEST LOS ANGELES AVE., MOORPARK, CA 93021 • (805) 553-5000 Technical Support: 800.831.7133 www.pentair.com All indicated Pentair trademarks and logos are property of Pentair Inc. or its global affiliates in the U.S.A. and/or
1
Pentair Water Pool and Spa heater related products are available at:
Call (800) 831-7133 for additional free copies of these instructions.
FAILURE TO FOLLOW ALL INSTRUCTIONS AND WARNINGS CAN RESULT IN
SERIOUS BODILY
INJURY OR DEATH.
THIS PRODUCT SHOULD BE
INSTALLED AND SERVICED ONLY BY A QUALIFIED POOL SERVICE
PROFESSIONAL.
INSTALLERS, POOL OPERATORS AND OWNERS MUST
READ THESE WARNINGS AND ALL INSTRUCTIONS IN THE HEATER
INSTALLATION AND USER’S GUIDE
BEFORE USING THIS PRODUCT.
THESE INSTRUCTIONS MUST BE LEFT WITH THE POOL OWNER.
INSTALLATION INSTRUCTIONS
AUTOMATIC BY-PASS VALVE KIT
(P/N 462048)
FOR MASTERTEMP® AND MAX-E-THERM® POOL AND SPA HEATERS
READ AND FOLLOW ALL INSTRUCTIONS - SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Automatic By-pass Valve Overview
In conjunction with a Pentair IntelliFlo VF pump the automatic by-pass valve functionality of the latest MasterTemp
heater will improve the head loss through the pool system, reduction of pump power consumption and the
longevity of the heater by automatically taking the heater mostly out of the flow loop when not in use.
The following instructions describe how to configure your pool/spa hydraulics for a 3-way or 2-way automatic
by-pass valve.
Related manuals:
IntelliValve Valve Actuator Manuals (P/N 522301)
P/N 462050.A
9/2020
Contents
•
2” 3-Way Valve (Pentair P/N 263026)
•
IntelliValve Actuator (Pentair P/N 521485)
•
2” Check Valve (Pentair P/N 263042)