Pentax K-5 K-5 K-5 manual
Pentax K-5 Manual
 |
UPC - 027075176546
View all Pentax K-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pentax K-5 manual content summary:
- Pentax K-5 | K-5 K-5 manual - Page 1
SLR Digital Camera Operating Manual For optimum camera performance, please read the Operating Manual before using the camera. - Pentax K-5 | K-5 K-5 manual - Page 2
companies. However, the TM or ® marks are not used in all cases in this manual. This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not - Pentax K-5 | K-5 K-5 manual - Page 3
as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest PENTAX Service Center. Continuing to use the product can cause a fire or electric shock. • Do not place your finger over the flash when discharging the flash. You may burn yourself. • Do - Pentax K-5 | K-5 K-5 manual - Page 4
get inside the product, consult a PENTAX Service Center. Continuing to use the product can cause a fire or electric shock. • If thunderstorm should be present during use of the battery charger and AC plug cord, unplug the power plug and discontinue use. Continuing to use the product can cause damage - Pentax K-5 | K-5 K-5 manual - Page 5
the battery charger. About the Battery Warning • If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately. Caution • Only use the specified battery with this camera. Use of other batteries may - Pentax K-5 | K-5 K-5 manual - Page 6
of your camera or recording media (SD Memory Card), etc. About the Battery and Charger • Storing the battery fully charged may decrease the battery performance. Avoid storing in high temperatures. • If the battery is left inserted and the camera is not used for a long time, the battery will over - Pentax K-5 | K-5 K-5 manual - Page 7
dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens. • Please contact a PENTAX Service Center for professional cleaning of the CMOS sensor. (This will involve a fee.) Storing Your Camera • Do not store the camera with preservatives or chemicals - Pentax K-5 | K-5 K-5 manual - Page 8
the Battery 49 Inserting/Removing the Battery 50 Battery Level Indicator 52 Approximate Image Storage Capacity and Playback Time (Battery Fully Charged 52 Using the AC Adapter (Optional 53 Inserting/Removing an SD Memory Card 55 Recorded Pixels and Quality Level 57 Attaching a Lens 59 - Pentax K-5 | K-5 K-5 manual - Page 9
Shooting (AE Lock 121 Focusing 122 Using the Autofocus 122 AF Fine Adjustment 126 Selecting the Focusing Area (AF Point 127 Locking the Focus (Focus Lock 130 Adjusting the Focus Manually (Manual Focus 132 Checking the Composition, Exposure and Focus Before Shooting (Preview 135 Selecting - Pentax K-5 | K-5 K-5 manual - Page 10
Flash 185 Lens Compatibility with the Built-in Flash 186 Using an External Flash (Optional 187 Using P-TTL Auto Mode 188 Using High-Speed Flash Sync Mode 189 Using Flash in Wireless Mode 190 Connecting an External Flash with an Extension Cord 194 Multiple Flash Shooting Using Extension Cords - Pentax K-5 | K-5 K-5 manual - Page 11
Brightness 214 Lens Correction 218 Adjusting the Composition 220 Setting the Image Finishing Tone 222 Setting Custom Image 222 Setting Cross Processing 225 Storing Frequently Used Settings 227 Saving the Settings 227 Checking the Saved USER Settings 229 Using Saved USER Settings 230 - Pentax K-5 | K-5 K-5 manual - Page 12
the Original Image 270 Developing RAW Images 271 Developing One RAW Image 271 Developing Multiple RAW Images 272 Specifying the Parameters 274 Changing Additional Settings 277 How to Operate the Set-up Menu 278 Set-up Menu Setting Items 278 Formatting the SD Memory Card 281 Customizing - Pentax K-5 | K-5 K-5 manual - Page 13
on Your Computer 317 Setting the USB Connection Mode 317 Saving Images by Connecting Your Camera and Your Computer ...318 Using the Provided Software 320 Installing the Software 320 Screens of the PENTAX Digital Camera Utility 4 322 Appendix 327 Default Settings 328 Resetting the Menus 335 - Pentax K-5 | K-5 K-5 manual - Page 14
12 Detecting Dust on the CMOS Sensor (Dust Alert 341 Removing Dust with a Blower 343 Optional Accessories 345 Error Messages 351 Troubleshooting 354 Main Specifications 356 Glossary 362 Index 367 WARRANTY POLICY 373 - Pentax K-5 | K-5 K-5 manual - Page 15
deleting, and protecting pictures. 8 8 Processing Images Explains the procedures for changing the image size, applying digital filters and developing images taken in RAW format. 9 9 Changing Additional Settings Explains the procedures for changing the camera settings, such as the monitor 10 - Pentax K-5 | K-5 K-5 manual - Page 16
14 The symbols used in this Operating Manual are explained below. 1 Indicates reference page number explaining a related operation. Indicates useful information. Indicates precautions to take when operating the camera. - Pentax K-5 | K-5 K-5 manual - Page 17
1 Before Using Your Camera Check the package contents and the names and functions of working parts before use. X Characteristics 16 Checking the Contents of the Package 18 Names and Functions of Working Parts 19 Display Indicators 24 How to Change Function Settings 39 Using the Mode Dial 45 - Pentax K-5 | K-5 K-5 manual - Page 18
HDMI video signals so that you can watch recorded images and movies on a TV or high-quality monitor. • A user-friendly design has been implemented in various parts of the camera. The large text size, high-contrast monitor and easy-to-use menus make the camera easier to operate. • The body exterior - Pentax K-5 | K-5 K-5 manual - Page 19
the X and 35 mm SLR cameras even if the same lens is used because the format sizes for 35 mm film and CMOS sensor are different. Sizes for 35 mm film and CMOS sensor 35 mm film : 36×24 mm X CMOS sensor : 23.7×15.7 mm The focal length of a lens used with a 35 mm camera is about 1.5 times longer - Pentax K-5 | K-5 K-5 manual - Page 20
on camera) Body mount cover (Installed on camera) Triangular ring and protective cover (Installed on camera) USB cable I-USB7 AV cable I-AVC7 Strap O-ST53 Rechargeable lithium-ion battery D-LI90 Battery charger D-BC90 AC plug cord Software (CD-ROM) S-SW110 Operating Manual (this manual) - Pentax K-5 | K-5 K-5 manual - Page 21
Before Using Your Camera Built-in flash Strap lug AF assist light Card cover Self-timer lamp /Remote control receiver Lens mount index Lens unlock button Speaker Microphone Viewfinder Microphone terminal mini HDMI terminal (Type C) PC/AV terminal DC input terminal Terminal cover Monitor Hot shoe - Pentax K-5 | K-5 K-5 manual - Page 22
20 Capture Mode Before Using Your Camera Functions of buttons, dials and levers used during shooting are noted. 1 1 7 2 8 3 9 4 0 5 a 6 b e f g h c set the ISO sensitivity. (p.95) 3 Shutter release button Press to capture images. (p.72) 4 Main switch Move to turn the power on/off - Pentax K-5 | K-5 K-5 manual - Page 23
117) a |/Y button You can assign a function to this button. (p.285) b Focus mode lever Switches between autofocus modes (l/k) (p.122) and manual focus mode (p.132). c Q button Switches to Playback mode. (p.83) d M button Turns the status screen display on the monitor on/off. (p.25) Switches to the - Pentax K-5 | K-5 K-5 manual - Page 24
-way controller (2345) Displays the Drive Mode/Flash Mode/White Balance/Custom Image setup menu. (p.88) 1 When the control panel or a menu screen is displayed, use this to move the cursor or change items. When the AF point switching dial is set to j (Select), use this to move the AF point. (p.128 - Pentax K-5 | K-5 K-5 manual - Page 25
the magnification. (p.237) 2 Shutter release button Press halfway to switch to Capture mode. 3 Main switch Move to turn the camera on and off. (p.62) Set to the | position to switch to Capture mode and preview. 4 Front e-dial (R) Use this to display the next or previous image. 5 i button Press to - Pentax K-5 | K-5 K-5 manual - Page 26
for 3 seconds (default setting) when the camera is switched on or the mode dial is turned. 1 P Program Automatic Exposure 2 RAW RAW P AF Cancel AF Tv Av 09/09/2010 10:30AM 3 4 1 Exposure Mode (p.100) 2 Guide indicator 3 World Time (p.289) 4 Current date and time (p.67) * 3 appears only - Pentax K-5 | K-5 K-5 manual - Page 27
Using Your Camera 25 Capture Mode While shooting, the status screen is displayed showing the current shooting function settings. You can change the type of the screen 200-1600 11 OFF OFF -5 4 3 2 1 1 2 3 4 +5 11 AWB OFF OFF OFF HDR OFF JPEG 16M JPEG 16M [ 37] [ 37] Status screen - Pentax K-5 | K-5 K-5 manual - Page 28
16 17 18 JPEG 16M [1234] 19 20 21 25 Before Using Your Camera 1 Exposure Mode (p.100) 2 AE Lock (p.121) 3 Interval Shooting (p.152)/Multi- exposure (p.155)/Extended Bracketing (p.160)/Digital Filter (p.162)/HDR Capture (p.215) 4 Shake Reduction (p.140)/ Horizon Correction (p.140) 5 Focus Mode - Pentax K-5 | K-5 K-5 manual - Page 29
Digital Filter (p.162) 11 HDR Capture (p.215) 12 File Format (p.202) 13 JPEG Recorded Pixels (p.200) 14 JPEG Quality (p.201) 15 Shake Reduction/ Horizon Correction (p.140) 16 Current date and time 17 Remaining image storage capacity • Settings that cannot be changed due to the current camera setup - Pentax K-5 | K-5 K-5 manual - Page 30
detecting whether the camera is level. camera angle appears at the bottom of the screen, and a bar graph indicating the vertical camera angle appears on the right side. Example: Before Using Your Camera are made within 1 minute. • If the camera angle cannot be detected, both ends and the center - Pentax K-5 | K-5 K-5 manual - Page 31
set in [Status Screen] of the [R OFF OFF HDR OFF JPEG 16M Set-up 1] menu. (p.295) [1234] Before Using Your Camera Playback Mode The camera switches the types of information display when you press the M button during playback. Standard Captured image, file format, and guides are displayed - Pentax K-5 | K-5 K-5 manual - Page 32
in the previous session. If [Playback Info Display] is set to P (Off) in [Memory] (p.312) of the [A Rec. Mode 5] menu, the [Standard] screen is always displayed first when the camera is turned on. 1 Detailed information display Use the four-way controller (23) to switch between pages. Before - Pentax K-5 | K-5 K-5 manual - Page 33
127)/ Autofocus Method (p.166) 11 Focus Mode (p.122) 12 Metering Method (p.117) 13 Shutter speed 14 Digital Filter (p.162) 15 Extended Bracketing (p.160)/ HDR Capture (p.215)/ Multi-exposure (p.155)/ Cross Processing (p.225) 16 Highlight Correction (p.214) 17 Shadow Correction (p.214) 18 Distortion - Pentax K-5 | K-5 K-5 manual - Page 34
100-0001 AE-L RAW 423 4 23 100-0001 11 Before Using Your Camera 5 AE-L RAW 12 5 1/2000 F5.6 ISO 200 23 1 13 1/2000 F5.6 ISO 200 6 7 protected images. * Indicator 4 appears only when the file format of the last captured image is JPEG, and its data still remains in the buffer memory. (p. - Pentax K-5 | K-5 K-5 manual - Page 35
Before Using Your Camera ← Number of pixels A histogram shows the brightness distribution of an image. Review (p.296) Understanding Color Balance Distribution of color intensity is displayed for each color in the RGB histogram. The right side of the graphs look similar for images that have White - Pentax K-5 | K-5 K-5 manual - Page 36
34 Guide Indicators Before Using Your Camera The following indicators appear on the monitor to indicate the keys, buttons and e-dials Green button 4 Four-way controller (4) L button 5 Four-way controller (5) i button R S Front e-dial Rear e-dial 3 button Shutter release button |/Y button - Pentax K-5 | K-5 K-5 manual - Page 37
23 1 1 1 Before Using Your Camera 45 6 7 89 10 11 12 13 14 15 16 17 18 19 1 AF frame (p.61) 2 Spot metering frame (p.118) 3 AF point (p.127) 4 Flash indicator (p.77) Lit: when the flash is available. Blinks: when the flash is recommended but not set or is being charged. 5 Focus Mode (p.132 - Pentax K-5 | K-5 K-5 manual - Page 38
images immediately after shooting. 1 Displays the compensation value while adjusting the EV compensation. Displays the amount of deviation from the correct exposure when the exposure mode is set to a or M and [Electronic Level] is set to O (On). (p.114) Before Using Your Camera 12 AE Lock - Pentax K-5 | K-5 K-5 manual - Page 39
Panel The following information appears in the LCD panel on top of the camera. Before Using Your Camera 34 5 1 1 6 7 2 8 9 10 11 12 13 Lock-up Shooting (p.149) 5 EV bar (p.119)/ Electronic Level (p.38) 6 EV Compensation (p.119)/ Exposure Bracketing (p.157) 7 Battery level (p.52) 8 Flash - Pentax K-5 | K-5 K-5 manual - Page 40
Before Using Your Camera 38 Electronic level display When the camera is not level, a bar graph indicating the horizontal camera angle is displayed in the viewfinder and on the LCD panel. 1 When level (at 0°) When tilted 5° to the left When held vertically and tilted 3° to - Pentax K-5 | K-5 K-5 manual - Page 41
, you can set Drive Mode, Flash Mode, White Balance and Custom Image by pressing the four-way controller (2345). (p.88) Below, how to set [Flash Mode] is explained as an example. 1 Press the four-way controller (3) in Capture mode. The [Flash Mode] screen appears. 2 Use the four-way controller (45 - Pentax K-5 | K-5 K-5 manual - Page 42
Before Using Your Camera 40 While direct key operation is enabled, the guide indicators for the direct keys are displayed in blue (when [Status Screen] (p.295) in the [R Set-up 1] menu is set to [Display Color 1]). Direct key operation is not available when the AF point switching dial is set - Pentax K-5 | K-5 K-5 manual - Page 43
Quality ISO AUTO 200-1600 11 OFF OFF OFF OFF OFF HDR OFF 1 JPEG 16M [ 37] Before Using Your Camera • Press the 4 button in Step 3 to display the detailed setting screen for the selected item. Make the detailed settings for functions such as Extended Bracketing and Digital Filter on the - Pentax K-5 | K-5 K-5 manual - Page 44
Rec. Mode 3] menu is explained as an example. Before Using Your Camera 1 Press the 3 button in Capture mode. The [A Each time the four-way controller (5) is Lens Correction pressed, the menu will change in the [R Set-up 1], [A Custom Setting 1]. 3 Use the four-way controller (23) to choose an - Pentax K-5 | K-5 K-5 manual - Page 45
Shutter Speed NR NRAUTO there is one. When there is a submenu, it Program Line Color Space 1 sRGB is displayed. RAW File Format PEF MENU Exit Before Using Your Camera 5 Use the four-way controller (23) to select a setting. 12345 D-Range Setting ISO AUTO Setting High-ISO NR Slow Shutter - Pentax K-5 | K-5 K-5 manual - Page 46
for details on each menu. • [A Rec. Mode] menu 1p.89 • [Q Playback] menu 1p.235 1 • [R Set-up] menu 1p.278 • [A Custom Setting] menu 1p.91 Before Using Your Camera - Pentax K-5 | K-5 K-5 manual - Page 47
button. 1 Mode dial Dial indicator Before Using Your Camera Mode dial lock button Mode A B Green e Hyper-program K Sensitivity Priority b Shutter Priority c Aperture Priority L Shutter & Aperture Priority a Hyper-manual Characteristics Lets you capture images with the saved exposure mode. Up - Pentax K-5 | K-5 K-5 manual - Page 48
Before Using Your Camera 46 Mode p Bulb M Flash X-sync 1 Speed C Movie Characteristics Lets you capture images that require slow shutter speeds such as fireworks and night scenes. The shutter speed is locked at 1/180 second. Use this when using an external flash that does not automatically set the - Pentax K-5 | K-5 K-5 manual - Page 49
chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions. Attaching the Strap 48 Inserting the Battery 49 Inserting/Removing an SD Memory Card ...........55 Attaching a Lens 59 Adjusting the Viewfinder Diopter 61 Turning the - Pentax K-5 | K-5 K-5 manual - Page 50
48 Attaching the Strap 1 2 Pass the end of the strap through the protective cover and triangular ring. Getting Started 2 Secure the end of the strap on the inside of the clasp. 3 Attach the other end of the strap in the same manner as described above. - Pentax K-5 | K-5 K-5 manual - Page 51
has not been 2 used in a long time, or when [Battery depleted] appears, recharge the battery. Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)" Indicator lamp Lithium-ion battery 3 2 1 AC plug cord Battery charger 1 Connect the AC - Pentax K-5 | K-5 K-5 manual - Page 52
than rechargeable lithium-ion battery D-LI90. Charging other batteries may cause damage or heating. • If the battery is correctly oriented and inserted into the battery charger but the indicator lamp is not lit, the battery is faulty. Use a new battery in the camera. • The maximum charging time - Pentax K-5 | K-5 K-5 manual - Page 53
Getting Started 3 Close the battery cover (4) and turn the battery cover unlock knob towards CLOSE (5) to lock. Stow the battery cover unlock knob after closing the battery cover. Battery lock lever 4 5 Use the AC adapter kit K-AC50 (optional) when using the camera for a prolonged period. (p.53 - Pentax K-5 | K-5 K-5 manual - Page 54
or A appears, you can use the camera. • W is displayed when using the AC adapter. Approximate Image Storage Capacity and Playback Time (Battery Fully Charged) Battery D-LI90 Normal (Temperature) Recording (23°C) 980 ( 0°C) 810 Flash Photography 50% Use 100% Use 740 610 680 560 Playback - Pentax K-5 | K-5 K-5 manual - Page 55
extra batteries ready when traveling overseas, taking pictures in cold climates, or taking a lot of pictures. Getting Started Using the AC Adapter (Optional) 2 We recommend the use of the AC adapter kit K-AC50 (optional) when using the monitor for a long time or when connecting the camera to - Pentax K-5 | K-5 K-5 manual - Page 56
are secure between the terminals. SD Memory Card or data may be corrupted if disconnected while the card is being accessed. Getting Started • Be sure to read the manual of the AC adapter kit K-AC50 when using the AC adapter. • The battery in your camera will not charge when connected to - Pentax K-5 | K-5 K-5 manual - Page 57
or removing the SD Memory Card. • Do not remove the SD Memory Card while the card access lamp is lit. 2 • Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices. Refer to "Formatting the SD Memory Card" (p.281) for details - Pentax K-5 | K-5 K-5 manual - Page 58
to fully close the card cover. The camera will not turn on if the card cover is open. Precautions When Using the SD Memory Card • The SD Memory Card is equipped with a write-protect switch. Setting the switch to LOCK prevents new data from being recorded on the card, the stored data from being - Pentax K-5 | K-5 K-5 manual - Page 59
using or storing the card in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation. • Format new SD Memory Cards. Also format SD Memory Cards used with other cameras. 2 1 Formatting the SD Memory Card (p.281) • The data on your SD Memory - Pentax K-5 | K-5 K-5 manual - Page 60
JPEG format or the high quality and editable RAW format. For RAW file format, you can select PENTAX's original PEF format or general-purpose DNG (Digital Negative) format designed by Adobe Systems. On a 2 GB SD Memory Card, you can record up to 58 images in either PEF or DNG format. 1 Setting - Pentax K-5 | K-5 K-5 manual - Page 61
lenses other than those listed above and accessories. Set [27. Using Aperture Ring] to [Permitted] in the [A Custom Setting 4] menu to use them. (p.339) 1 Make sure the camera is turned off. 2 Remove the body mount cover (1) and lens mount cover (2). Be sure to put the lens down with the lens mount - Pentax K-5 | K-5 K-5 manual - Page 62
4 • We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers. • The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may damage the electrical system - Pentax K-5 | K-5 K-5 manual - Page 63
the lever until the AF frame in the viewfinder is focused. Point the camera at a white wall or other bright and consistent surface. AF frame to see the viewfinder image clearly even if you use the diopter adjustment lever, use the optional diopter correction lens adapter M. However, the Eyecup - Pentax K-5 | K-5 K-5 manual - Page 64
Started • Always turn the camera off when not in use. • The power will automatically turn off when you do not perform any operations within a set period of time. To reactivate the camera, turn it on again or perform any of the following. - Press the shutter release button halfway. - Press the - Pentax K-5 | K-5 K-5 manual - Page 65
date and time. Once these settings are made, you will not need to set them again next time you turn on your camera. MENU Cancel 2 OK OK If the [Date Adjustment] screen appears, set the date , Traditional Chinese, Simplified Chinese and Japanese. 1 Use the four-way controller (2345) to select the - Pentax K-5 | K-5 K-5 manual - Page 66
) does not have to be changed. Initial Setting New York Text Size English Standard Settings complete MENU Cancel Press the four-way controller (3). The cursor moves to W. Press the four-way controller (5). The [W Hometown] screen appears. Use the four-way controller (45) to select a city - Pentax K-5 | K-5 K-5 manual - Page 67
-way controller (3) to select [Settings complete]. Initial Setting New York Text Size English Standard Settings complete MENU Cancel OK OK 13 Press the 4 button. The [Date Adjustment] screen appears. In this manual, the menu screens hereafter are described with [Text Size] set to [Standard]. - Pentax K-5 | K-5 K-5 manual - Page 68
) • When the hometown and the date and time are not set, the [Initial Setting] screen or [Date Adjustment] screen will be displayed again next time the camera is turned on. • If you have not proceeded to the [Date Adjustment] screen, you can reselect a language using the four-way controller (5) in - Pentax K-5 | K-5 K-5 manual - Page 69
1 Press the four-way controller (5). The frame moves to [mm/dd/yy]. 2 2 Use the four-way controller (23) Date Adjustment to choose the date format. Date Format mm /dd / yy 24h Choose [mm/dd/yy], [dd/mm/yy] or [yy/ Date mm/dd]. Time 01 / 01 / 2010 00 :00 Settings complete MENU Cancel OK - Pentax K-5 | K-5 K-5 manual - Page 70
3 button while setting the date and time cancels the settings made up to that point and switches the camera to Capture mode. After initial settings are complete, if the camera power is turned off before the date and time settings are complete, the [Date Adjustment] screen will appear first next time - Pentax K-5 | K-5 K-5 manual - Page 71
set to j) to ensure successful capturing. For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward. Basic Shooting Operation 70 Using a Zoom Lens 76 Using the Built-in Flash 77 Playing Back Pictures 83 - Pentax K-5 | K-5 K-5 manual - Page 72
firmly with both hands and keep your elbows close to your body. • Press the shutter release button gently when taking a picture. 3 Basic Operations Horizontal position Vertical position • To reduce camera shake, support your body or the camera on a solid object such as a table, tree, or wall - Pentax K-5 | K-5 K-5 manual - Page 73
a proper exposure is determined by the camera and the shutter speed and aperture value are automatically set. Basic Operations Mode dial lock button 2 Set the focus mode lever to l. The focus mode changes to l (Autofocus/Single) mode. When the shutter release button is pressed halfway in l, the - Pentax K-5 | K-5 K-5 manual - Page 74
to view the subject. A zoom lens can be used to change the size of the subject in the viewfinder. (p.76) Basic Operations 4 3 Position the subject inside the AF frame and press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder - Pentax K-5 | K-5 K-5 manual - Page 75
image during Instant 3 Review by pressing the i button. 1Deleting a Single Image (p.84) Delete Basic Operations • Refer to p.103 for details on using B (Green) mode. • You can set the camera so that pressing the = button will focus automatically, in the same way as pressing the shutter release - Pentax K-5 | K-5 K-5 manual - Page 76
the indicators in the viewfinder and the autofocus system operates. Pressing it fully (second position) takes a picture. • Press the shutter release button gently when taking a picture to prevent camera shake. • Practice pressing the shutter release button halfway/fully to learn where the first - Pentax K-5 | K-5 K-5 manual - Page 77
to focus on The autofocus mechanism is not perfect. Focusing may be difficult when taking pictures under the following conditions. These also apply to manual focusing using the focus indicator ] in the viewfinder. (a) Extremely low-contrast subjects such as a white wall in the focusing area - Pentax K-5 | K-5 K-5 manual - Page 78
76 Using a Zoom Lens Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust the subject to the desired size and take magnified the image appears. • Power Zoom (Auto Zoom) is available if a Power Zoom compatible FA lens is used with this camera. (p.337) - Pentax K-5 | K-5 K-5 manual - Page 79
compatibility. 1 Lens Compatibility with the Built-in Flash (p.186) • When using the built-in flash, remove the lens hood before shooting. • The built-in flash fully discharges for lenses without a function to set the lens aperture ring to s (Auto). For details on the built-in flash and instructions - Pentax K-5 | K-5 K-5 manual - Page 80
dedicated external flash (AF540FGZ or AF360FGZ) without using a sync cord. (p.190) Basic Operations The flash modes that Flash Mode] screen appears. The flash modes that can be selected for the set exposure mode appear. 2 Use the four-way controller (45) to select a flash mode. Flash Mode Flash - Pentax K-5 | K-5 K-5 manual - Page 81
the 4 button. The camera is ready to take a picture. Using Built-in Flash 3 1 Press the E button. The built-in flash pops up and begins charging. When the flash is fully charged, E appears in the viewfinder and on the LCD panel. (p.35, p.37) 2 Press the shutter release button fully. The picture - Pentax K-5 | K-5 K-5 manual - Page 82
to the subject if a zoom lens is in use. • Use a flash that supports red-eye reduction. • Position the flash as far away from the camera as possible when using an external flash. The red-eye reduction function on this camera reduces a red-eye effect by discharging the flash twice. With the red-eye - Pentax K-5 | K-5 K-5 manual - Page 83
with a shadow cast on a person's face. Use of the flash in this way is called Daylight-Sync shooting. [Flash On] is used when shooting with Daylight-Sync shooting. Taking pictures (in e mode) 1 Pop up the built-in flash manually and confirm that the flash mode is set to E. 2 Confirm that the - Pentax K-5 | K-5 K-5 manual - Page 84
output compensation is also effective for external flash units which support P-TTL auto flash mode. Enabling Shooting while Charging the Flash You can set the camera to enable shooting while the flash is being charged. Set [20. Release While Charging] to [On] in the [A Custom Setting 3] menu (p.92 - Pentax K-5 | K-5 K-5 manual - Page 85
Playing Back Pictures 83 Basic Operations Playing Back Images You can play back captured images with the camera. Use the provided "PENTAX Digital Camera Utility 4" software to play back pictures using a computer. Refer to "Using the Provided Software" (p.320) for details on the software. 3 1 - Pentax K-5 | K-5 K-5 manual - Page 86
If the image was shot using any of the following settings, the corresponding RAW image listed is saved. - Multi-exposure RAW image with Multi-exposure - Extended Bracketing RAW image with standard settings - Digital Filter RAW image without filter effect - HDR Capture RAW image with standard - Pentax K-5 | K-5 K-5 manual - Page 87
3 Use the four-way controller (23) to select [Delete]. Select a file format to delete for images saved in RAW+ format. Delete JPEG Deletes only the JPEG image. Delete RAW Deletes only the RAW image. Delete RAW+JPEG Deletes images in both file formats. 85 100-0105 Delete Cancel OK OK 3 - Pentax K-5 | K-5 K-5 manual - Page 88
86 Memo - Pentax K-5 | K-5 K-5 manual - Page 89
Checking the Composition, Exposure and Focus Before Shooting (Preview 135 Using the Shake Reduction Function to Prevent Camera Shake 139 Taking Pictures Continuously 151 Shooting while Adjusting the Settings (Auto Bracketing 157 Taking Pictures Using Digital Filters 162 Shooting with Live View - Pentax K-5 | K-5 K-5 manual - Page 90
following items. Shooting Functions Key Item 2 Drive Mode 3 Flash Mode 4 White Balance 5 Custom Image Function Sets Continuous Shooting, Self-timer, Remote Control, Exposure Bracketing or Mirror Lock-up Shooting. Sets the method of flash discharge. Adjusts the color balance to match the type - Pentax K-5 | K-5 K-5 manual - Page 91
A1 JPEG Quality *2 Sets the recording size of images saved in JPEG format. Sets the quality of images saved in JPEG format. p.200 p.201 AUTO AF Point Setting *2 Sets the number of AF points when the focusing area is set to S (AUTO). p.127 Lens Correction *2 Corrects distortions and chromatic - Pentax K-5 | K-5 K-5 manual - Page 92
the image. p.140 Shake Reduction *2 Reduces vertical and horizontal camera shake. p.140 Input Focal Length Sets the focal length when using a lens whose focal length information cannot be obtained. p.142 Instant Review Sets the Instant Review display settings. p.296 Digital Preview Sets - Pentax K-5 | K-5 K-5 manual - Page 93
frames with one release when using Exposure Bracketing. p.159 10. WB Adjustable Range A2 11. WB When Using Flash Sets whether to automatically fine-tune the white balance when specifying the light source on the white balance setting. Sets the white balance setting when using flash. p.206 p.206 - Pentax K-5 | K-5 K-5 manual - Page 94
to [On], if the focus mode is set to l and a manual focus lens is attached, catch-in focus shooting is enabled and the shutter is released automatically when the subject comes into focus. p.134 26. AF Fine Adjustment Adjusts the AF focusing position. p.126 27. Using Aperture Ring Reset Custom - Pentax K-5 | K-5 K-5 manual - Page 95
shutter speed. Using faster shutter speed Choosing a faster shutter speed will allow freezing the action of a moving subject. A faster shutter speed also helps to prevent camera shake. Effect of Aperture By changing the aperture, you can control the depth of the area that appears in focus in the - Pentax K-5 | K-5 K-5 manual - Page 96
but compared to a 35 mm camera, the value is roughly one aperture setting lower (the focused range becomes narrower). • The wider the wide-angle lens, and the farther away the subject, the deeper the depth of field is (some zoom lenses do not have a scale for depth of field because of their designs - Pentax K-5 | K-5 K-5 manual - Page 97
12800. The default setting is [AUTO]. Shooting Functions 1 Turn the rear e-dial (S) while pressing the o button in Capture mode. The sensitivity displayed on the status screen and LCD panel and in the viewfinder changes. 4 Press the | button to set the sensitivity to [AUTO - Pentax K-5 | K-5 K-5 manual - Page 98
(Sensitivity Priority), a (Hyper-manual), p (Bulb) or M (Flash X-sync Speed), the sensitivity cannot menu. • Captured images may show more noise if a higher sensitivity is set. You can 4 reduce image noise by setting screen appears. 2 Press the four-way controller (5) ISO AUTO Setting and use - Pentax K-5 | K-5 K-5 manual - Page 99
Use the four-way controller (23) to select [AUTO ISO Parameters] and press the four-way controller (5). 4 6 Use the 3 button twice. The screen that was displayed before selecting the expressed by the CMOS sensor pixels, making it more difficult for bright areas to occur in the image. To expand the - Pentax K-5 | K-5 K-5 manual - Page 100
shooting with a digital camera, image noise (image roughness or unevenness) becomes noticeable in the following situations. - when shooting with a long exposure - when shooting with a high sensitivity setting - when the temperature of the CMOS sensor is high You can reduce image noise by using Noise - Pentax K-5 | K-5 K-5 manual - Page 101
to the [1. EV Steps] and [2. Sensitivity Steps] settings made in the [A Custom Setting 1] menu (p.91). Shooting Functions 6 Press the 3 button. The screen that was displayed in Step 2 appears again. 7 Press the 3 button twice. The camera is ready to take a picture. Slow Shutter Speed NR Reduces - Pentax K-5 | K-5 K-5 manual - Page 102
Slow Shutter Speed NR set to [On]. Pictures cannot be taken while an image is being processed. 4 • When the Noise Reduction function is activated, [nr Shooting Functions Changing the Exposure Mode This camera features the following nine exposure modes. Use the mode dial to change the exposure - Pentax K-5 | K-5 K-5 manual - Page 103
p Bulb Lets you capture images that require slow shutter speeds such as fireworks × and night scenes. Other than × z AUTO (up to p.115 ISO 1600) The shutter speed is M locked at 1/180 second. Flash Use this when using an X-sync external flash that does - Speed not automatically - Pentax K-5 | K-5 K-5 manual - Page 104
to the set Program Line. Setting Characteristics j Auto Camera determines the appropriate settings. k Normal Basic Program best aperture settings for the attached lens when a DA, DA L, D FA, FA J or FA lens is used. Shooting Functions Using a Lens with an Aperture Ring When using a lens - Pentax K-5 | K-5 K-5 manual - Page 105
103 Using the B (Green) Mode Lets you capture images with fully automatic settings. In B mode, pictures are taken with the segment Metering) S (Auto) • AUTO AF Point Setting 11 AF Points • White Balance F (Auto) • Custom Image Bright • High-ISO NR Auto • Slow Shutter Speed NR Auto 4 • - Pentax K-5 | K-5 K-5 manual - Page 106
Flash (Flash On, Slow-speed Sync, Exposure Compensation) • Continuous Shooting • Focus Mode k (l is selected) • D-Range Setting • Lens Correction • Exposure Bracketing • Mirror Lock-up shooting • Multi-exposure • Interval Shooting • Extended Bracketing • Digital Filter • HDR can also use the front - Pentax K-5 | K-5 K-5 manual - Page 107
105 2 Confirm the shutter speed and aperture value. Confirm the settings using the status screen, viewfinder or LCD panel. P 1/125 100 ISO AUTO AF.S F5.6 -5 4 3 2 1 1 2 3 4 +5 11 AWB JPEG 16M [ 37] • Set the Program Line to use in [Program Line] of the [A Rec. Mode 3] menu. (p.102) • Turn - Pentax K-5 | K-5 K-5 manual - Page 108
106 2 Turn the rear e-dial (S) to adjust the sensitivity. Shooting Functions The set values are displayed in the status screen and viewfinder and on the LCD panel. Sv AF.S 1/30 F4.5 4 ISO 100 -5 4 3 2 1 1 2 3 4 +5 11 AWB JPEG 16M [ 37] • You can set the sensitivity to a value - Pentax K-5 | K-5 K-5 manual - Page 109
107 Using the b (Shutter Priority) Mode Lets you set the desired shutter speed for expressing set within the range of 1/8000 to 30 seconds. The set values are displayed in the status screen and viewfinder and on the LCD panel. Tv 1/125 400 ISO AUTO AF.S F5.6 -5 4 3 2 1 1 2 3 4 +5 11 - Pentax K-5 | K-5 K-5 manual - Page 110
is too bright or too dark, the aperture value will blink on the status screen and LCD panel and in the viewfinder. If the subject is too bright, choose picture with proper exposure. Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark. - Pentax K-5 | K-5 K-5 manual - Page 111
Using the c (Aperture Priority) Mode Set the aperture value for controlling the depth of field. The depth of field is deeper and the front and back of the focused object is clear when the aperture is set to a large value, small lens are displayed in the status screen and viewfinder and on the LCD panel. - Pentax K-5 | K-5 K-5 manual - Page 112
will blink on the status screen and LCD panel and in the viewfinder. When the subject is too Use a flash if it is too dark. Using the L (Shutter & Aperture Priority) Mode You can set both the desired shutter speed and aperture to take the picture. Automatically sets the sensitivity so that the manually - Pentax K-5 | K-5 K-5 manual - Page 113
of 1/8000 to 30 seconds. Shooting Functions 3 Turn the rear e-dial (S) to adjust the aperture value. 4 The set values are displayed in the status screen and viewfinder and on the LCD panel. TAv 1/1000 100 ISO AUTO AF.S F4.5 -5 4 3 2 1 1 2 3 4 +5 11 AWB JPEG 16M [ 37] • Turn the rear e-dial - Pentax K-5 | K-5 K-5 manual - Page 114
. When the indication stops blinking, you can take a picture with proper exposure. Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark. 4 Using the a (Hyper-manual) Mode You can set the shutter speed and aperture value. This mode is - Pentax K-5 | K-5 K-5 manual - Page 115
8000 to 30 seconds. Shooting Functions 4 Turn the rear e-dial (S) to adjust the aperture value. 4 The set values are displayed in the status screen and viewfinder and on the LCD panel. M 1/125 ISO 100 AF.S F5.6 -5 4 3 2 1 1 2 3 4 +5 11 AWB JPEG 16M [ 37] While adjusting the shutter speed or - Pentax K-5 | K-5 K-5 manual - Page 116
the bar graphs in the viewfinder and on the LCD panel display the amount of camera tilt to the left or right, the difference from the proper exposure is displayed as O (On). Shooting Functions 4 Combining with L When the exposure is locked (p.121) by pressing the L button in a mode, if the shutter - Pentax K-5 | K-5 K-5 manual - Page 117
p (Bulb) Mode This setting is useful when shooting night scenes and fireworks which require long exposures. 1 Set the mode dial to p. Shooting Functions 4 B AF.S Bulb F5.6 ISO 100 -5 4 3 2 1 1 2 3 4 +5 11 AWB JPEG 16M [ 37] 2 Press the shutter release button. The shutter remains open as - Pentax K-5 | K-5 K-5 manual - Page 118
use of the AC adapter kit K-AC50 (optional) when shooting with a long exposure setting as the battery is being drained while the shutter remains open. (p.53) Shooting Functions Using the M (Flash X-Sync Speed) Mode The shutter speed is locked at 1/180 second. Use this when using an external flash - Pentax K-5 | K-5 K-5 manual - Page 119
. The set metering method is displayed in the status screen and viewfinder. Shooting Functions L Multi-segmented Metering The using a lens other than a DA, DA L, D FA, FA J, FA, F or A lens, or when the lens aperture ring is set to a position other than s (Auto). (Can only be used if [27. Using - Pentax K-5 | K-5 K-5 manual - Page 120
the 4 viewfinder. Use this metering when you want to compensate for the exposure by experience, instead of leaving it to the camera. The illustration is measured only within a limited area at the center of the viewfinder. You can use this in combination with the AE Lock (p.121) when the subject - Pentax K-5 | K-5 K-5 manual - Page 121
while pressing the m button. The exposure is adjusted. 4 Shooting Functions m is displayed in the status screen and viewfinder and on the LCD panel during adjustment. P 1/100 ISO 100 AF.S F5.6 Compensation value -5 canceled by turning the camera off or by switching to another exposure mode. - Pentax K-5 | K-5 K-5 manual - Page 122
EV compensation value is set to +1.5 for a (Hyper-manual) and M (Flash X-sync speed) modes, an underexposure of 1.5 EV is displayed on the EV bar. If you set the exposure value so that the V is displayed at the center of the EV bar, the image - Pentax K-5 | K-5 K-5 manual - Page 123
and press the L button. The camera locks the exposure (brightness) at that instant. @ is displayed in the status screen and viewfinder while the AE Lock is engaged. 4 • The exposure remains locked as long as the L button is kept pressed or the shutter release button is kept pressed halfway. The - Pentax K-5 | K-5 K-5 manual - Page 124
122 Focusing You can focus with the following methods. = Autofocus \ Manual focus The camera automatically focuses on the subject when the shutter release button is pressed halfway. Manually adjust the focus. Using the Autofocus You can also choose the autofocus mode from l (Single mode) where 4 - Pentax K-5 | K-5 K-5 manual - Page 125
(p.92). Focus1 priority The shutter cannot be released until the subject is in focus. (default setting) If the subject is too close to the camera, move back and take the picture. If the subject is difficult to focus (p.75), adjust the focus manually. (p.132) Release2 priority The shutter can be - Pentax K-5 | K-5 K-5 manual - Page 126
location, 1 On the AF assist light turns on when the shutter release button is pressed halfway. (default setting) 2 Off The AF assist light will not be used. Using the = Button to Focus on the Subject You can set the camera so that focusing is performed when the = button is pressed. 1 Select [Button - Pentax K-5 | K-5 K-5 manual - Page 127
the viewfinder. Autofocus is performed. l Single mode k Continuous mode When the = button is pressed and the subject comes into focus, the Focus Lock function is activated while the button is pressed. The subject is kept in focus while the = button is pressed. 7 Press the shutter release button - Pentax K-5 | K-5 K-5 manual - Page 128
should be taken as adjusting the autofocus may make it difficult to capture images with the appropriate focus. • Any camera shake during test shooting may make it difficult to obtain the accurate focusing position. Therefore, always use a tripod when taking test shots. 1 42 3 Select [26. AF Fine - Pentax K-5 | K-5 K-5 manual - Page 129
. The camera returns to Capture mode. 7 Take a test picture. You can easily check the focusing point by enlarging the image during Digital Preview (p.138 focusing area to the center of the viewfinder. Sets the focusing area to the user selected point from eleven points in the AF frame. The camera - Pentax K-5 | K-5 K-5 manual - Page 130
focusing area is fixed to U regardless of this setting when using lenses other than DA, DA L, D FA, FA J, FA or F lens. (p.337) Setting the Focus of the subject. 3 Use the four-way controller (2345) to change the AF point. The selected AF point appears in the status screen. P 1/2000 ISO AUTO - Pentax K-5 | K-5 K-5 manual - Page 131
Area) and you can check where you set the AF point. 4 Shooting Functions • The position of the changed AF point is stored even if the camera is turned off or the focusing area is switched to U or S. • V appears in the viewfinder when the AF point can be changed. • When any of the following - Pentax K-5 | K-5 K-5 manual - Page 132
3 Center the subject to focus in the viewfinder and press the shutter release button halfway. The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.) 4 Lock the focus. Keep the shutter release button pressed halfway. The - Pentax K-5 | K-5 K-5 manual - Page 133
when the image is focused can be turned off. (p.288) 4 Locking Exposure when the Focus is Locked Set [5. AE-L with AF Locked] in the [A Custom Setting 1] menu (p.91) to lock the exposure value while the focus is locked. 5. AE-L with AF Locked 1 Off 2 On AE is locked when the focus is locked MENU - Pentax K-5 | K-5 K-5 manual - Page 134
. Using the Focus Indicator The focus indicator ] appears in the viewfinder when the subject is in focus even during manual focus. You can manually adjust the focus using the focus indicator ]. 1 Set the focus mode lever to \. 4 2 Look through the viewfinder, press the shutter release button - Pentax K-5 | K-5 K-5 manual - Page 135
will hear a beep when the subject comes into focus. Focus indicator • Adjust the focus manually using the matte field in the viewfinder when the subject is difficult to focus (p.75) and the focus indicator will not appear. • The beep that sounds when the image is focused can be turned off. (p.288 - Pentax K-5 | K-5 K-5 manual - Page 136
l and one of the following types of lenses is attached, catch-in focus shooting is enabled and the shutter is released automatically when the subject comes into focus. • Manual focus lens • DA or FA lens that has a = and \ setting on the lens (the setting on the lens must be set to \ before shooting - Pentax K-5 | K-5 K-5 manual - Page 137
preview methods. Preview Method | Optical Preview e Digital Preview Description For checking the depth of field with the viewfinder. For checking the composition, exposure and focus on the monitor. You can also use the Live View function to display a real-time image on the monitor and change the - Pentax K-5 | K-5 K-5 manual - Page 138
the histogram and Bright/Dark Area warning, and whether to enable enlarging images. 1 Select [Digital Preview] in the [A Rec. Mode 5] menu and press the four-way controller (5). The [Digital Preview] screen appears. 2 Use the four-way controller (23) to select [Histogram], [Bright/Dark Area] or - Pentax K-5 | K-5 K-5 manual - Page 139
Preview 1 Position the subject inside the AF frame and press the shutter release button halfway to focus on the subject. Shooting Functions 2 Turn the main switch to | while viewfinder, and the shutter cannot be released. 3 Take your finger off the main switch. Optical Preview is ended and the - Pentax K-5 | K-5 K-5 manual - Page 140
composition, exposure and focus. Available operations Rear e-dial (S) L button AE.L Enlarges the preview image. (p.237) Saves the preview image. Select [Save as] and press the 4 button. 2 Press the shutter release button halfway. Digital Preview is ended and the autofocus system operates. The - Pentax K-5 | K-5 K-5 manual - Page 141
Camera Shake Using the Shake Reduction Function The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed. This is useful for taking pictures in situations where camera can be used to reduce horizontal and vertical camera shake or keep the image level. - Pentax K-5 | K-5 K-5 manual - Page 142
. The screen that was displayed before selecting the menu appears again. Aim the camera at the subject and press the shutter release button halfway. k appears in the viewfinder and the Shake Reduction function is activated. Shooting Functions Correcting the Tilt of the Images When an image is - Pentax K-5 | K-5 K-5 manual - Page 143
shooting - Mirror Lock-up shooting - when [Auto Align] is set to P (Off) in the [HDR Capture] setting - when using the flash in wireless shutter release button halfway, the camera is ready to take a picture. • The Shake Reduction function is available with any X compatible PENTAX lens. However - Pentax K-5 | K-5 K-5 manual - Page 144
30 35 40 45 50 55 65 70 75 85 100 120 135 150 180 200 250 300 350 400 450 500 550 600 700 800 MENU Cancel OK OK • If the focal length for your lens is not listed above, select the value closest to the actual focal length (example: [18] for 17 mm and - Pentax K-5 | K-5 K-5 manual - Page 145
. The shutter is released after about 2 seconds. Use this mode to avoid camera shake when the shutter release button is pressed. 4 1 Mount the camera onto a tripod. Shooting Functions 2 Press the four-way controller (2) in Capture mode. The [Drive Mode] screen appears. 3 Use the four-way - Pentax K-5 | K-5 K-5 manual - Page 146
Shooting Functions 144 6 7 4 Press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when focused. Press the shutter release button fully. For g, the front and back self-timer lamps start blinking slowly and blink rapidly 2 seconds - Pentax K-5 | K-5 K-5 manual - Page 147
P (Off) in [Memory] (p.312) of the [A Rec. Mode 5] menu. • The Shake Reduction function is automatically turned off when g or Z is set. • You can set the camera so that the beep does not sound. (p.288) • The exposure may be affected if light enters the viewfinder. Use the AE Lock function (p.121) or - Pentax K-5 | K-5 K-5 manual - Page 148
on the LCD panel. The selftimer lamp will blink and the camera is in a stand-by status. MENU Cancel OK OK 5 Press the 4 button. The camera is ready to take a picture. 6 Press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when - Pentax K-5 | K-5 K-5 manual - Page 149
receiver on the front or back of the camera and press the shutter release button on the remote control. The operating distance of the remote control unit is approximately 4 m from the front of the camera and approximately 2 m from the back of the camera. After a picture is taken, the self-timer lamp - Pentax K-5 | K-5 K-5 manual - Page 150
canceled when the camera is turned off if [Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec. Mode 5] menu. • The Shake Reduction function is automatically turned off when h, i or i is set. • The exposure may be affected if light enters the viewfinder. Use the AE Lock function (p.121 - Pentax K-5 | K-5 K-5 manual - Page 151
immediately after the shutter Remote Control release button on the remote control unit is pressed (p.145). 4 1 Mount the camera onto a tripod. Shooting Functions 2 Press the four-way controller (2) in Capture mode. The [Drive Mode] screen appears. 3 Use the four-way controller (45) to select - Pentax K-5 | K-5 K-5 manual - Page 152
4 button. The camera is ready to take a picture. Press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when focused. Press the shutter release button fully. The mirror pops up and you will hear a beep. The AE Lock function is enabled - Pentax K-5 | K-5 K-5 manual - Page 153
continuously at a maximum of approx. 7.0 fps. h Continuous Shooting (Lo) For JPEG image with p/C, pictures are taken continuously at a maximum of approx. 1.6 fps until the SD Memory Card is full. 4 When the file format is [RAW] (PEF), up to approx. 8 frames for g and up to approx. 10 frames - Pentax K-5 | K-5 K-5 manual - Page 154
Shooting when the focus mode is set to k (Continuous mode). 4 • You can also use the remote control for Continuous Shooting. (p.145) • The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the built - Pentax K-5 | K-5 K-5 manual - Page 155
the four-way controller (3) to select [Start Time], use the four-way controller (45) to select the time, and use the four-way controller (23) to set the start time. 5 Use the four-way controller (23) to select [Start Shooting] and press the 4 button. The camera is ready to take a series of interval - Pentax K-5 | K-5 K-5 manual - Page 156
with Instant Review, they cannot be enlarged or deleted. • The [Interval] setting is disabled when [Number of Shots] is set to [1]. • Interval Shooting is canceled when the SD Memory Card has no more available space. • If the Auto Power Off function (p.304) turns the camera off during Interval - Pentax K-5 | K-5 K-5 manual - Page 157
set to B (Green) or C (Movie) - when Digital Filter, HDR Capture or Cross Processing is set • When Multi-exposure used) - Lens Correction Shooting Functions 1 Select [Multi-exposure] in the [A Rec. Mode 2] menu and press the four-way controller (5). 4 The [Multi-exposure] screen appears. 2 Use - Pentax K-5 | K-5 K-5 manual - Page 158
each time the shutter release button is pressed. Press the i button during Instant Review to discard pictures taken up to that point and take pictures again from the first frame. The pictures are saved when the set number of shots is taken, and then the [Multi-exposure] screen appears again. • If - Pentax K-5 | K-5 K-5 manual - Page 159
the camera settings release button is pressed. You can select to take 2 images (Standard/+), 2 images (Standard/-), 3 images or 5 images. When taking 3 pictures, the first image is exposed with no compensation, the second image HDR Capture is set • Exposure Bracketing and Multi-exposure cannot be used - Pentax K-5 | K-5 K-5 manual - Page 160
. The [Drive Mode] screen appears. Use the four-way controller (45) to select l. 3 Press the four-way controller (3) and use the four-way controller ( is released immediately. 4 Turn the front e-dial (R) to set the number of shots. Select [2 images (+)], [2 images (-)], [3 images] or [5 images]. - Pentax K-5 | K-5 K-5 manual - Page 161
[A Custom Setting 2] menu (p.91). Shooting Functions • When the focus mode is set to l (Single mode), the focus position is locked in the first image and is used for subsequent images. • When you take your finger off the shutter release button during Exposure Bracketing, the exposure setting will - Pentax K-5 | K-5 K-5 manual - Page 162
file format is set to [RAW] or [RAW+]. • When Extended Bracketing is set, the following functions are not available. • Interval Shooting or Multi-exposure 4 • Cross Processing, Digital Filter or HDR Capture (The function selected last is used) Shooting Functions 1 Select [Extended Bracketing - Pentax K-5 | K-5 K-5 manual - Page 163
Press the 3 button twice. 4 The camera returns to Capture mode. 7 Take a picture. Three images are saved. Shooting Functions • Exposure Bracketing and Extended Bracketing can be used at the same time. When used at the same time, each time the shutter is released for Exposure Bracketing, three - Pentax K-5 | K-5 K-5 manual - Page 164
162 Taking Pictures Using Digital Filters Shooting Functions You can apply a filter when taking pictures. The following filters can be selected. Filter Name Effect Parameter Toy Camera For taking pictures that Shading Level: +1 to +3 look as if taken with a toy Blur: +1 to +3 camera. Tone - Pentax K-5 | K-5 K-5 manual - Page 165
color filter. Green/Yellow 4 Select from 18 filters (6 colors × 3 tones). HDR Capture (The function selected last is used) Depending on the filter used, it may take longer to save images. 1 Select [Digital Filter] in the [A Rec. Mode 2] menu and press the four-way controller (5). The screen - Pentax K-5 | K-5 K-5 manual - Page 166
and the four-way controller (45) to adjust the parameter's value. Shape MENU Cancel Check AE.L OK OK Available operations Main switch (|) L button Uses Digital Preview to preview the background image with the filter effect applied. (Not available when the exposure mode is set to C (Movie - Pentax K-5 | K-5 K-5 manual - Page 167
is used in places where the camera may become hot, such image display is nearly 100%. • You can use the provided AV cable (I-AVC7) or a commercially available HDMI cable to display Live View images on a TV or monitor. (p.256) • Live View is not displayed when data is being saved to an SD Memory Card - Pentax K-5 | K-5 K-5 manual - Page 168
View and performs autofocus with the AF sensor. If the shutter release button is pressed halfway during Live View, the Live View image will disappear and the autofocus system operates. Once focused, the Live View image will be displayed again. 3 Press the 4 button. 4 Use the four-way controller - Pentax K-5 | K-5 K-5 manual - Page 169
select O or P. 4 8 Press the 3 button twice. The screen that was displayed before selecting the menu appears again. Shooting Functions It takes more time to focus on the subject when using I or i than when using S. It is also difficult for the camera to focus on the following objects (or under the - Pentax K-5 | K-5 K-5 manual - Page 170
] 16 17 18 19 20 21 P 2000 F2.8 ISO400 [ 37] 22 23 1 Exposure Mode 2 Flash Mode 3 Drive Mode 4 White Balance 5 Custom Image 6 Extended Bracketing/Multi- exposure/Interval Shooting/ Digital Filter/HDR Capture 7 Number of shots using Multiexposure/Cross Processing 8 Battery level 9 Adjusting - Pentax K-5 | K-5 K-5 manual - Page 171
focus mode is l or the AF point switching dial is set to j (Select). 3 Position the subject on the monitor and press the shutter release button halfway. The autofocus system operates. When the focus mode is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen - Pentax K-5 | K-5 K-5 manual - Page 172
to i, the camera focuses on the center of the screen when autofocus starts and then automatically tracks the subject when it is in focus. When [Autofocus Method] is set to I, the camera automatically tracks the detected face. • Images captured in magnified display are recorded at normal size. • You - Pentax K-5 | K-5 K-5 manual - Page 173
and press the four-way controller (5). The [Movie] screen appears. 4 2 Press the four-way controller (5), use the four-way controller (23) to select the controller (5). 4 Use the four-way controller (23) to select the quality level and press the 4 button. Select from C (Best; default setting), - Pentax K-5 | K-5 K-5 manual - Page 174
Digital Filter as necessary. Refer to p.225 for details on Cross Processing and p.162 for Digital Filter. Use Use the four-way controller (23) to select k or l and press the 4 button. k Uses Shake Reduction. l Does not use Shake Reduction. (default setting) 12 Press the 3 button twice. The camera - Pentax K-5 | K-5 K-5 manual - Page 175
. No sound will be recorded. If you used an external microphone to record movie sound in stereo, the sound can be played back in stereo when you use a commercially available HDMI cable to output the movie to an HDMI-compatible AV device. (p.258) If you use an AV cable to output the movie, monaural - Pentax K-5 | K-5 K-5 manual - Page 176
view). m button + Performs EV compensation (up to ±2 EV). Rear e-dial (S) M button Enlarges the image. 2, 4, or 6 times original size (when the focus mode is =) 2, 4, 6, 8 or 10 times original size (when the focus mode is \) Press and hold 4 Switches the function of the four-way controller - Pentax K-5 | K-5 K-5 manual - Page 177
recorded. When recording a movie, mount the camera onto a tripod and do not operate the camera while recording. • While recording a movie, the autofocus system does not operate. • The flash is not available. • When recording movies using image processing, such as Digital Filter, some frames may be - Pentax K-5 | K-5 K-5 manual - Page 178
• You can record movies continuously up to 4 GB or 25 minutes. When the SD Memory Card is full, recording stops and the movie is saved. • Live View images in C mode are displayed according to the [Live View] settings (p.166) made in the [A Rec. Mode 4] menu. However, the Bright/ Dark Area warning is - Pentax K-5 | K-5 K-5 manual - Page 179
177 Playing Back Movies Recorded movies can be played back in Playback mode in the same manner as saved images. 1 Press the Q button. The camera switches to Playback mode. 2 Use the four-way controller (45) to choose a movie to play back. The first frame of the movie is displayed on the monitor. - Pentax K-5 | K-5 K-5 manual - Page 180
the L button. The save confirmation screen appears. Frame number/Total number of frames 90/1800 AE-L Movie 10min00sec 3 Use the four-way controller (23) to select [Save as] and press the 4 button. The captured image is saved as a new image. Saves the image as a new file Save as Cancel OK OK - Pentax K-5 | K-5 K-5 manual - Page 181
on the monitor. 3 Press the four-way controller (3). 4 The playback mode palette appears. 4 Use the four-way controller (2345) to select [ (Movie Editing) and press the 4 button. The movie editing screen appears. 5 Select point(s) where you want to divide the movie. Up to four points can be - Pentax K-5 | K-5 K-5 manual - Page 182
Moves the selection frame Confirms/cancels a selection of a segment to delete Exits the screen to select segments to delete Press the 4 button. The save confirmation screen appears. 00min00sec 10min00sec Shooting Functions 8 Use the four-way controller (23) to select [Save as] and press the - Pentax K-5 | K-5 K-5 manual - Page 183
5 Using the Flash This chapter provides details on the built-in flash of X and describes how to take pictures with the external flash. Flash Characteristics in Each Exposure Mode 182 Distance and Aperture when Using the Built-in Flash 185 Lens Compatibility with the Built-in Flash .......186 Using - Pentax K-5 | K-5 K-5 manual - Page 184
The shutter speed is locked at 1/180 sec. when a lens other than a DA, DA L, D FA, FA J, FA, F or A lens is used. Using the Flash in c (Aperture slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake. The picture will - Pentax K-5 | K-5 K-5 manual - Page 185
speed is set slower to give a proper exposure for the background. 5 Take a picture. 5 Using the Flash Using b/L/a Mode 1 Set the mode dial to b, L or a. 2 Press the four-way controller (3). The [Flash Mode] screen appears. 3 Select E or F and press the 4 button. 4 Set the shutter speed (for - Pentax K-5 | K-5 K-5 manual - Page 186
[Flash Mode] screen appears. 3 Select I or k and press the 4 button. 4 Press the E button. The built-in flash pops up. 5 Take a picture. Trailing Curtain Sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake - Pentax K-5 | K-5 K-5 manual - Page 187
Sensitivity Built-in flash guide number ISO 100 Approx. 13 ISO 3200 Approx. 73.5 ISO 200 Approx. 18.4 ISO 6400 Approx. 104 ISO 400 Approx. 26 ISO 12800 Approx. 147 ISO 800 Approx. 36.8 ISO 25600 *1 Approx. 208 ISO 1600 Approx. 52 ISO 51200 *1 Approx. 294 *1 This can be used when - Pentax K-5 | K-5 K-5 manual - Page 188
Lens Compatibility with the Built-in Flash Depending on the lens used with the X, even if a lens without a hood is attached, the use of the built-in flash may not be available or may be limited due to vignetting. DA, DA L, D FA, FA J, and FA lenses not listed below can be used without problems -50mm - Pentax K-5 | K-5 K-5 manual - Page 189
with the AF540FGZ or AF360FGZ. *5 Multiple AF540FGZ or AF360FGZ units, or a combination of an AF540FGZ or AF360FGZ unit and the built-in flash is required. Flashes with reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera and flash. - Pentax K-5 | K-5 K-5 manual - Page 190
, etc.) using the camera 77-segment metering sensor. The flash output for the actual flash is adjusted based on the information obtained from the pre-flash, enabling flash photography with more accurate exposure for the subject than with normal TTL auto. 1 Remove the cover of the hot shoe and attach - Pentax K-5 | K-5 K-5 manual - Page 191
cord. (p.194) 189 Using the Flash Using High-Speed Flash Sync Mode With the AF540FGZ or AF360FGZ, you can discharge the flash to take a 5 picture at a shutter speed faster than 1/180 second. 1 Remove the cover of the hot shoe and attach the external flash (AF540FGZ or AF360FGZ) to the camera - Pentax K-5 | K-5 K-5 manual - Page 192
, set the channel for the external flash unit. 1 Set the channel for the external flash unit. 2 Remove the cover of the hot shoe and attach the external flash. 3 Turn on the camera and the external flash, and press the shutter release button halfway. The built-in flash is set to the same channel as - Pentax K-5 | K-5 K-5 manual - Page 193
the Built-in Flash in Wireless Mode Set the camera to wireless flash mode when using an external flash in combination with the built-in flash. 1 Press the four-way controller (3). The [Flash Mode] screen appears. 2 Select r and press the 4 button. Flash Mode Wireless Mode The camera is ready to - Pentax K-5 | K-5 K-5 manual - Page 194
MASTER] or [CONTROL]. Using the Flash MASTER CONTROL Sets the camera to discharge both the flash directly connected to the camera and the wireless flash unit. Sets the camera to discharge the flash directly connected to the camera as a control flash only, not as the main flash. 2 On the wireless - Pentax K-5 | K-5 K-5 manual - Page 195
is exchanged between the flash units before the flash is discharged. Press the shutter release button fully. È 1 The flash directly connected to the camera emits a control flash (relays the flash mode of the camera). 2 The wireless remote flash emits a test flash (relays confirmation of subject - Pentax K-5 | K-5 K-5 manual - Page 196
the Hot Shoe Adapter FG (optional) to the camera hot shoe and an Off-Camera Shoe Adapter F (optional) to the bottom of the external flash, and connect these 5 with the Extension Cord F5P (optional) as shown in the illustration below. The Off-Camera Shoe Adapter F can be mounted to your tripod using - Pentax K-5 | K-5 K-5 manual - Page 197
illustration below. Connect an external flash and the Hot Shoe Adapter F (optional) to the Off-Camera Shoe Adapter F (optional) and then connect another Off-Camera Shoe Adapter F with external flash using the Extension Cord F5P (optional). Refer to the manual of the flash for details. When combining - Pentax K-5 | K-5 K-5 manual - Page 198
of contacts, such as a Hot Shoe Grip, as a malfunction may occur. • Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using the AF540FGZ, AF360FGZ or AF200FG. Using the Flash 1 5 2 Connect the external flash to the camera indirectly. Refer to p.194 for - Pentax K-5 | K-5 K-5 manual - Page 199
is minus) cannot be used due to the risk of damaging the camera and flash. • When a sync cord is connected to the X-sync socket, linked functions will not work. 5 • To prevent vignetting caused from Trailing Curtain Sync, it is recommended to take a test shot using a shutter speed one level - Pentax K-5 | K-5 K-5 manual - Page 200
198 Memo - Pentax K-5 | K-5 K-5 manual - Page 201
6 Shooting Settings This chapter describes how to set the save format for pictures taken and other settings. Setting a File Format 200 Setting the White Balance 205 Correcting Images 214 Setting the Image Finishing Tone 222 Storing Frequently Used Settings 227 - Pentax K-5 | K-5 K-5 manual - Page 202
Size 14"×17" / A2 paper 10"×12" / A3 paper 8"×10" / A4 paper 5"×7" / A5 paper The paper sizes 2 Use the Lens Correction 2M the top left of the screen and the number of recordable images for that setting MENU Cancel OK OK appears at the top right of the screen. 3 Press the 3 button. The camera - Pentax K-5 | K-5 K-5 manual - Page 203
Quality 6 When the quality level is changed, the number of recordable images at that AUTO AF Point Setting D-Range Setting Lens Correction quality level appears at the top right of the screen. MENU Cancel OK OK 3 Press the 3 button. The camera is ready to take a picture. Shooting Settings - Pentax K-5 | K-5 K-5 manual - Page 204
Effects of White Balance, Custom Image and Color Space are not applied to the captured images, but they are saved as actual original information. When you perform the development process by using RAW Development function (p.271), or using the provided software (PENTAX Digital Camera Utility 4) after - Pentax K-5 | K-5 K-5 manual - Page 205
four-way controller (5). The [|/Y Button] screen appears. 3 Press the four-way controller (5). 4 Use the four-way controller (23) to select [One Push File Format] and press the 4 button. RAW/Fx Button RAW One Push File Format Exposure Bracketing Digital Preview Electronic Level Composition Adjust - Pentax K-5 | K-5 K-5 manual - Page 206
(5), and use the four-way controller (23) to select a file format when the |/Y button is pressed. RAW/Fx Button RAW One Push File Format Cancel after 1 shot JPEG RAW RAW+ JRPAEWG+ RRAAWW+ RAW+ RAW+ MENU Cancel OK OK 8 Press the 4 button. 9 Press the 3 button three times. The screen that was - Pentax K-5 | K-5 K-5 manual - Page 207
tones in a picture. Approx. 2,850K L Flash For use when taking pictures using the built-in flash. Approx. 5,400K CTE *2 Use this to keep and strengthen the color tone of the light source in the image. - Use this to manually adjust the white K Manual 1-3 balance according to the lighting - Pentax K-5 | K-5 K-5 manual - Page 208
6 3 CTE K1 MENU Cancel Check AE.L OK OK Available operations Main switch (|) L button Uses Digital Preview to preview the background image with the setting applied. Saves the background image. Select [Save as] and press the 4 button. Press the 4 button. The camera is ready to take a picture - Pentax K-5 | K-5 K-5 manual - Page 209
adjustment value. 4 Press the 4 button. The camera returns to the [White Balance] screen. 5 Press the 4 button. The camera is ready to take a picture. When set to K, the white balance can also be measured by pressing the shutter release button fully (except while recording a movie). Shooting - Pentax K-5 | K-5 K-5 manual - Page 210
MENU Cancel AE.L Check OK OK 3 Under the light to measure the white balance, fully display a white sheet of paper in the viewfinder or select a white area as the subject. 4 Press the shutter release button fully. Set the focus mode to \ when the shutter cannot be released. The screen to select - Pentax K-5 | K-5 K-5 manual - Page 211
) Manual White Balance SHUTTER Adjust 1 G ±0 ±0 ±0 MENU Cancel B A Check M AE.L OK OK 8 Press the 4 button. The camera returns to the [White Balance] screen. 9 Press the 4 button. The camera is ready to take a picture. 6 Shooting Settings • No image is recorded when the shutter release - Pentax K-5 | K-5 K-5 manual - Page 212
be saved. 1 Select K in Step 2 on p.206 and press the four-way controller (5). 2 Use the four-way controller (23) to select K1 to K3 and press the four-way controller (5). The [Color Temperature] screen appears. 3 Adjust the color temperature with the front or rear e-dial. 6 Color Temperature - Pentax K-5 | K-5 K-5 manual - Page 213
camera returns to the [White Balance] screen. Turn the main switch to | to display Digital Preview with the set color temperature. 5 Press the 4 button. The camera Daylight (Fluorescent light) Cloudy Daylight Flash Neutral white (Fluorescent light) White (Fluorescent light) Halogen light bulb - Pentax K-5 | K-5 K-5 manual - Page 214
NR NRAUTO Program Line Color Space sRGB RAW File Format PAdEobFeRGB MENU Cancel OK OK camera supports sRGB and AdobeRGB. sRGB is mainly used for devices such as a computer. AdobeRGB covers a wider range of color than sRGB and is used for occupational uses such as industrial printing. An image - Pentax K-5 | K-5 K-5 manual - Page 215
. The save confirmation screen appears. You can turn the front e-dial (R) to select a different image. 4 Use the four-way controller (23) to select a number and press the 4 button. The white balance setting of the selected image is saved to Manual White Balance and the camera switches to Capture - Pentax K-5 | K-5 K-5 manual - Page 216
214 Correcting Images Shooting Settings The camera and lens properties can be sensor and reduces the occurrence of overexposed and underexposed areas. 61 2 Select [D-Range Setting] in the [A Rec. Mode 3] menu and press the four-way controller (5). The [D-Range Setting] screen appears. Use - Pentax K-5 | K-5 K-5 manual - Page 217
overexposed) to create a single composite image with them. • HDR Capture is not available in the following situations. - when the file format is set to [RAW] or [RAW+] (fixed to [JPEG]) - when the exposure mode is set to p (Bulb) or M (Flash X-sync Speed) • When HDR Capture is set, the following - Pentax K-5 | K-5 K-5 manual - Page 218
four-way controller (45) to select P or O. MENU Cancel HDR Capture HDR Capture Auto Align HDR OFF HDR AUTO HDR HDR HDR HDR OK OK HDR AUTO Shooting Settings 6 5 MENU P [Shake Reduction] is fixed to l (Off). Use a tripod to prevent camera shake when taking pictures. (default setting) The Shake - Pentax K-5 | K-5 K-5 manual - Page 219
images are taken. If there is a great difference of the composition between three images, [Auto Align] may not be possible. - Images taken with HDR Capture are susceptible to camera than normal. - [Auto Align] may not be possible for lenses that have a focal length exceeding 100 mm. - When the - Pentax K-5 | K-5 K-5 manual - Page 220
inflated (barrel distortion) or the center of the image appears pinched (pincushion distortion). Distortion occurs more easily when using a zoom lens or a small diameter lens, and straight walls or the horizon in the image appear curved. Shooting Settings 6 Pincushion distortion Barrel distortion - Pentax K-5 | K-5 K-5 manual - Page 221
can only be made when using DA, DA L, D FA or some FA lenses (p.337). [Lens Correction] cannot be selected when an incompatible lens is attached. • [Distortion Correction] is disabled when using a DA FISH-EYE 10-17mm. • The Lens Correction function is disabled when using an accessory such as a close - Pentax K-5 | K-5 K-5 manual - Page 222
of the screen. 00 0 Adjust the composition of the image Shooting Settings MENU Cancel OK OK Available operations Four-way controller (2345) Rear e-dial (S) | button Moves the composition up, down, left or right. Adjust up to 24 steps (approximately ±1.5 mm) on the image sensor. Adjusts the - Pentax K-5 | K-5 K-5 manual - Page 223
221 4 Press the 4 button. The camera returns to normal Live View and is ready to take a picture. • The saved adjustment value is reset when Live View is ended. • When using the composition adjustment function frequently, you can assign the function to the |/Y button. (p.285) 6 Shooting Settings - Pentax K-5 | K-5 K-5 manual - Page 224
[Fine Sharpness] or [Extra Sharpness], which makes image outlines even thinner and sharper. (Not available when the exposure mode is set to C (Movie).) -4 to +4 Filter Effect Changes the contrast to appear as if a B&W color filter was used. Set the filter color. • Available only when [Monochrome - Pentax K-5 | K-5 K-5 manual - Page 225
in Capture mode. The screen to select a custom image appears. After the power is turned on, the last image taken is displayed in the background. 2 Use the four-way controller (45) to select an image finishing tone. Bright R M Y B G C MENU Cancel AE.L EX F Check OK OK 3 Use the four-way - Pentax K-5 | K-5 K-5 manual - Page 226
. Resets the set value. Uses Digital Preview to preview the background image with the setting applied. (Not available during Live View.) Saves the background image. Select [Save as] and press the 4 button. (Not available during Live View.) Press the 4 button. The camera is ready to take a picture - Pentax K-5 | K-5 K-5 manual - Page 227
is set to [RAW] or [RAW+]. • When Cross Processing is set, the following functions and operation are not available. - Multi-exposure - Extended Bracketing or HDR Capture (The function selected last is used.) - Changing the settings of White Balance and Custom Image Shooting Settings 1 Select - Pentax K-5 | K-5 K-5 manual - Page 228
cross processed image that you like, you can save the Cross Processing settings used in that image. A total camera will search for cross processed images starting from the most recent image taken. (An hourglass icon is MENU displayed while searching.) When a cross processed image is found, the screen - Pentax K-5 | K-5 K-5 manual - Page 229
• Drive Mode • Slow Shutter Speed NR • Flash Mode/Flash Exposure Compensation • D-Range Setting • White Balance • HDR Capture • Sensitivity/ISO AUTO Setting • Custom Image • EV compensation value • Cross Processing • Program Line • Digital Filter • Exposure Bracketing • Shake Reduction - Pentax K-5 | K-5 K-5 manual - Page 230
Settings] screen appears. Save USER Mode Save Settings Rename USER Mode Check Saved Settings Reset USER Mode MENU 4 Use the four camera returns to the [Save USER Mode] screen. USER1 Save Settings Saves current settings in USER1 custom mode Save Cancel MENU OK OK Shooting Settings Editing - Pentax K-5 | K-5 K-5 manual - Page 231
A modes. 5 Press the 3 button. Shooting Settings Checking the Saved USER Settings 1 Select [Check Saved Settings] in Step 3 of "Saving the Settings" (p.227) and press the four-way controller (5). The [Check Saved Settings] screen appears. 2 Use the four-way controller (23) to select [A1] to [A5 - Pentax K-5 | K-5 K-5 manual - Page 232
3 Press the 4 button. The camera returns to the [Save USER Mode] screen. USER1 USER1 P 2.0x5 ±0 ISO AUTO 200-800 ISO NR AUTO ±0 AWB G1 A1 11 NR ON ±0 ±0 -0.5 ON WB BA ±1 ± 0 +1.0 1 ±0 JPEG 16M AdobeRGB ±0 MENU OK OK Shooting Settings Using Saved USER Settings You can easily - Pentax K-5 | K-5 K-5 manual - Page 233
settings. When the camera is turned off, settings return to the ABCDEFGHIJKLMNOPQR USER Mode sUSRERG1 B Lens Correction MENU Cancel OK OK original saved settings. Shooting Settings Changing the Settings Changes the settings saved in A1 to A5. 6 1 Perform Steps 1 to 3 of "Using Saved USER - Pentax K-5 | K-5 K-5 manual - Page 234
Settings Resets the settings saved in A1 to A5 to the default settings. 1 Select [Reset USER Mode] in Step 3 of "Saving the Settings" (p.227) and press the four-way controller (5). The [Reset USER Mode] screen appears. 2 Use the four-way controller (23) to select [A1] to [A5] and press the four - Pentax K-5 | K-5 K-5 manual - Page 235
234 Setting the Playback Display Method 236 Enlarging Images 237 Displaying Multiple Images 238 Playing Back Images Continuously 246 Rotating Images 249 Deleting Multiple Images 250 Protecting Images from Deletion (Protect) ......254 Connecting the Camera to an AV Device .........256 - Pentax K-5 | K-5 K-5 manual - Page 236
the playback mode palette even when a movie is paused. Playback Functions 7 Item s Image Rotation *1 D Digital Filter*1 n Resize *1 *2 o Cropping *1 u Slideshow Image Rotation Rotates captured images. Useful for image playback on TV and other display devices MENU Exit OK OK Function Page - Pentax K-5 | K-5 K-5 manual - Page 237
as Manual WB *1 h RAW Development *1 You can copy the white balance setting of a captured image and save it as Manual White Balance. Converts RAW images to JPEG format. p.213 p.271 p Index *1 g Image Comparison *1 [ Movie Editing *3 Joins a number of images together and creates a new image with - Pentax K-5 | K-5 K-5 manual - Page 238
the Bright/Dark Area warning, and whether to automatically rotate images that are shot with the camera held vertically in Playback mode. 1 Select [Quick Zoom] in the [Q Playback 1] menu and press the four-way controller (5). 2 Use the four-way controller (23) to select the magnification and - Pentax K-5 | K-5 K-5 manual - Page 239
[Quick Zoom] of the [Q Playback 1] menu. (p.236) • You can enlarge the image by following the same procedure during Instant Review (p.73), Digital Preview (p.138) or Live View (p.168). • The initial full display of vertical images is displayed with a magnification of 0.675 times that of horizontal - Pentax K-5 | K-5 K-5 manual - Page 240
the monitor at the same time. The default setting is nine image-display. 1 Turn the rear e-dial (S) to the left (toward f) in Playback mode. Playback Functions The multi-image display screen appears. Up to nine thumbnail images are displayed at once. 7 Selection frame INFO 100-0001 Scroll bar - Pentax K-5 | K-5 K-5 manual - Page 241
developing multiple RAW images (p.272).) Selects multiple images and deletes them. (p.250) 2 Press the 4 button. A full screen display of the selected image appears. 7 Icons such as C and ? are not displayed with thumbnail images for 81-image display. Displaying Images by Folder Images will be - Pentax K-5 | K-5 K-5 manual - Page 242
it. (p.252) 3 Press the 4 button. The multi-image display screen for the selected folder appears. Displaying Images by the Shooting Date (Calendar Display) 7 Images will be grouped and displayed by the shooting date. 1 In the multi-image display screen, press the M button. The [Multi-img Display - Pentax K-5 | K-5 K-5 manual - Page 243
(y) M button i button Selects a shooting date. Selects an image taken on the selected shooting date. Displays the selected image. Turn to the left (f) to return to the calendar display. The camera returns to the multi-image display screen. Deletes selected images. 3 Press the 4 button. A full - Pentax K-5 | K-5 K-5 manual - Page 244
selection frame is placed on both images, you can manipulate both images at the same time. Switches information display On/Off. When the selection frame is placed on the left or right image, the selected image is deleted. Press the 3 button. The camera returns to the normal playback mode. Playback - Pentax K-5 | K-5 K-5 manual - Page 245
the displayed index print as a new image. You can select the images to include in the index print screen appears. 3 Press the four-way controller (5). 4 Use the four-way controller (23) Index to select a layout and press the Layout 4 button. You can select o (Thumbnail), p (Square), Images - Pentax K-5 | K-5 K-5 manual - Page 246
-way controller (23) to select the background color and press the 4 button. You can select a white or black background. Index Layout Images 12 Backgrnd. Selection Create an index image MENU Cancel OK OK 9 Use the four-way controller (23) to select [Selection] and press the four-way controller - Pentax K-5 | K-5 K-5 manual - Page 247
OK OK Save Reshuffle The index image is saved as a P and C file. Reselects the images to be included in the index and displays a new index image. However, if [Thumbnail] is selected for [Layout], this item is not displayed. After the index image is saved, the camera returns to Playback mode and - Pentax K-5 | K-5 K-5 manual - Page 248
can play back all images saved on your SD Memory Card successively in the slideshow. Setting the Slideshow Display Sets how images will be displayed during the Slideshow. 1 2 7 Select [Slideshow] in the [Q Playback 1] menu and press the four-way controller (5). The screen to make the slideshow - Pentax K-5 | K-5 K-5 manual - Page 249
four-way controller (5) and use the four-way controller (23) to change the setting and press the 4 button. Start Interval Screen Effect Repeat Playback MENU the playback mode palette and press the 4 button. The start screen is displayed and the slideshow begins. Start OK 7 Playback Functions - Pentax K-5 | K-5 K-5 manual - Page 250
is pressed *1 - the 3 button is pressed *1 - the shutter release button is pressed halfway or fully *2 - the mode dial is camera switches to normal Playback mode. *2 After slideshow ends, the camera switches to Capture mode. For movies, only the first frame is displayed and then the next image - Pentax K-5 | K-5 K-5 manual - Page 251
are taken with X held vertically, the vertical position sensor activates and rotation information is added to the image to enable playback with the correct image orientation. You can change the rotation information and save the image using the following procedure. • When [23. Saving Rotation Info - Pentax K-5 | K-5 K-5 manual - Page 252
a time. 1 Turn the rear e-dial (S) to the left (toward f) in Playback mode. The multi-image display screen appears. 7 2 Press the i button. The screen to select the images to delete is displayed. The screen temporarily changes to 36image display when [Multi-img Display Setting] (p.239) is set to - Pentax K-5 | K-5 K-5 manual - Page 253
(S) Moves the selection frame. Adds O and selects an image. Press again to return to P. Protected images (Z) cannot be selected. Displays a full screen display of the image selected with the selection frame. When the image is displayed full screen, press the four-way controller (45) to display the - Pentax K-5 | K-5 K-5 manual - Page 254
selected folder will be deleted Delete Cancel OK OK 4 Press the 4 button. The selected folder and all images in it are deleted. The confirmation screen appears when there are protected images. Use the fourway controller (23) to select [Delete All] or [Leave All] and press the 4 button. 3image - Pentax K-5 | K-5 K-5 manual - Page 255
displayed. 2 Press the four-way controller (2) to select [Delete All Images]. All images will be deleted from memory 3 Press the 4 button. All images are deleted. The confirmation screen appears when there are protected images. Use the fourway controller (23) to select [Delete All] or [Leave All - Pentax K-5 | K-5 K-5 manual - Page 256
if the inserted SD Memory Card is formatted. Playback Functions Protecting a Single Image 1 2 3 7 Press the four-way controller (3) in Playback mode. The playback mode palette appears. Use the four-way controller (2345) to select Z (Protect) and press the 4 button. The screen to select the - Pentax K-5 | K-5 K-5 manual - Page 257
images. 7 Press the 3 button. The camera returns to Playback mode. Protecting All Images 1 Select [All Images] in Step 3 on p.254 and press the 4 button. 2 Press the four-way controller (2) to select [Protect] and press the 4 button. Protects all images All images saved on the SD Memory Card - Pentax K-5 | K-5 K-5 manual - Page 258
input terminal or HDMI terminal and play back images. • If you intend to use the camera continuously for a long period, use of the AC adapter kit K-AC50 (optional) is recommended. (p.53) • For an AV device with multiple video input terminals, check the operating manual of the AV device, and select - Pentax K-5 | K-5 K-5 manual - Page 259
4 Turn the AV device and camera on. The camera turns on in video mode, and the camera information is displayed on the screen of the connected AV device. Even if you used an external microphone to record movie sound in stereo, monaural sound is played back. Selecting the Video Output Format When the - Pentax K-5 | K-5 K-5 manual - Page 260
terminal on the AV device. 4 Turn the AV device and camera on. The camera turns on in HDMI mode, and the camera information is displayed on the screen of the connected AV device. • The camera has a mini HDMI terminal (Type C). Use a commercially available HDMI cable that matches your AV device - Pentax K-5 | K-5 K-5 manual - Page 261
2 Use the four-way controller (23) 1234 to select the HDMI output format. Brightness Level ±0 LCD Color Tuning The maximum size corresponding to the AV Video Out HDMI Out USB Connection NTSC Auto M10S8C0i Auto device and camera is Folder Name 720p automatically selected. Create New Folder - Pentax K-5 | K-5 K-5 manual - Page 262
260 Memo - Pentax K-5 | K-5 K-5 manual - Page 263
8 Processing Images This chapter describes how to process pictures taken and edit RAW images. Changing the Image Size 262 Processing Images with Digital Filters 265 Developing RAW Images 271 - Pentax K-5 | K-5 K-5 manual - Page 264
screen to select the recorded pixels and quality level appears. 4 Use the four-way controller (45) to select the desired image size. You can select one of the image sizes starting from one size smaller than that of the original image. The selectable sizes vary according to the original image size - Pentax K-5 | K-5 K-5 manual - Page 265
the desired area of the selected image and saves it as a new image.The aspect ratio can also be changed. • Only JPEG and RAW files captured with this camera can be cropped. • Images already resized to S or Z with this camera cannot be cropped. 1 Select an image to crop in Playback mode. 2 Press - Pentax K-5 | K-5 K-5 manual - Page 266
. | appears only when the cropping frame can be rotated. 5 Press the 4 button. The save confirmation screen appears. 6 Use the four-way controller (23) to select [Save as] and press the 4 button. The cropped image is saved as a new image. Saves the image as a new file Save as Cancel MENU OK OK - Pentax K-5 | K-5 K-5 manual - Page 267
Processing Images with Digital 265 Filters You can edit captured images using digital filters. The following filters are available. Filter Name Effect Parameter Creates an image that looks Shading Level: +1 to +3 Toy Camera as though it was shot with a Blur: +1 to +3 toy camera. Tone Break - Pentax K-5 | K-5 K-5 manual - Page 268
HDR Custom Filter Creates an image that looks as though it was shot with a Weak/Medium/Strong fish-eye lens. Changes the horizontal and vertical ratio of images. -8 to +8 Creates an image that looks like a high dynamic range image. Weak/Medium/Strong High Contrast: OFF/+1 to +5 Soft Focus - Pentax K-5 | K-5 K-5 manual - Page 269
Only JPEG and RAW files captured with this camera can be edited using the Digital Filter. 267 Applying the Digital Filter 1 Select an image for applying the digital filter in Playback mode. 2 Press the four-way controller (3). The playback mode palette appears. 3 Use the four-way controller ( - Pentax K-5 | K-5 K-5 manual - Page 270
Cancel MENU OK OK Press the 4 button. If [Use filters in combination] was selected, the camera returns to Step 4. If [Save as] was selected, the filter-processed image is saved as a new image. Up to 20 filters, including a digital filter used during shooting (p.162), can be combined to the same - Pentax K-5 | K-5 K-5 manual - Page 271
parameters. 269 100-0001 Reapplies following digital filter effects from previous image 1. 5. 9. 13. 2. 6. 10. 14. 3. 7. 11. 15. 4. 8. 12. 16. MENU INFO Details 17. - 18. - 19. - 20. - - OK OK 5 Press the 4 button. The image selection screen appears. 6 Use the four-way controller (45) to - Pentax K-5 | K-5 K-5 manual - Page 272
The original image prior to digital filter application is retrieved. Applying the digital filter Recreating filter effects Searching for the original image MENU OK OK If the original image is no longer stored on the SD Memory Card, the message [Original image, prior to digital filter application - Pentax K-5 | K-5 K-5 manual - Page 273
with other cameras cannot be edited on this camera. Developing One RAW Image 1 Select a RAW image in Playback mode. 2 Press the four-way controller (3). The playback mode palette appears. 3 Use the four-way controller (2345) to select h (RAW Development) and press the 4 button. The screen to - Pentax K-5 | K-5 K-5 manual - Page 274
4 button. The RAW image is developed and saved as a new image. 7 Use the four-way controller (23) to select [Continue] or [Exit]. Select [Continue] to edit other images. RAW JPEG Saves the image as a new file Save as Cancel MENU OK OK Image developed and stored. Continue developing? Continue - Pentax K-5 | K-5 K-5 manual - Page 275
OK 6 Press the 4 button. The save confirmation screen appears. 7 Use the four-way controller (23) to select [Save as] and press the RAW JPEG 4 button. Selected images are saved as new files The selected RAW images are developed and saved as new images. Save as Cancel MENU OK OK Processing - Pentax K-5 | K-5 K-5 manual - Page 276
for developing RAW images. The following parameters can be changed. Parameter Value Page File Format Recorded Pixels *1 Quality Level *1 JPEG/TIFF p (4928×3264)/J (3936×2624)/ P (3072×2048)/i (1728×1152) Z (Premium) / C (Best) / D (Better) / E (Good) p.200 p.201 Custom Image White Balance - Pentax K-5 | K-5 K-5 manual - Page 277
as] and press the 4 button. The RAW image is developed and saved as a new image. • You cannot save the background image and use Digital Preview with White Balance and Custom Image. • When the white balance is set to K (Manual), press the M button to display the measuring screen. 8 Processing Images - Pentax K-5 | K-5 K-5 manual - Page 278
276 Memo - Pentax K-5 | K-5 K-5 manual - Page 279
to Operate the Set-up Menu 278 Formatting the SD Memory Card 281 Customizing Buttons and Dials 282 Setting the Beep, Date and Time, and Display Language 288 Adjusting the Correcting Defective Pixels in the CMOS Sensor (Pixel Mapping 311 Selecting Settings to Save in the Camera (Memory 312 - Pentax K-5 | K-5 K-5 manual - Page 280
local date and time of the specified city so they can be displayed on the monitor in addition to the present location when traveling overseas. p.289 Sets the text size of an item selected on the respective menu screens. p.293 Beep Switches the beep tone on/off. p.288 9 Guide Display Sets - Pentax K-5 | K-5 K-5 manual - Page 281
. p.317 Folder Name Sets the naming system of the folder for storing images. p.300 Create New Folder Creates a new folder on the SD Memory Card. p.300 File Name Sets the method used to assign file names for images. p.302 Copyright Information R3 Auto Power Off Sets the photographer and - Pentax K-5 | K-5 K-5 manual - Page 282
1234 Date Adjustment World Time Text Size Beep Guide Display Status Screen MENU Exit English Standard 3sec. [R Set-up 3] menu 1234 File Name IMGP Copyright Information Auto Power Off 1min. Select Battery Reset MENU Exit [R Set-up 2] menu 1234 Brightness Level LCD Color Tuning Video Out - Pentax K-5 | K-5 K-5 manual - Page 283
Formatting the SD Memory Card 281 Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices. Formatting deletes all the data saved on the SD Memory Card. • Do not remove the SD Memory Card while formatting. The card may be damaged - Pentax K-5 | K-5 K-5 manual - Page 284
, = button or Preview dial is operated, or when the shutter release button is pressed halfway. Setting the Function for the E-dials For menu and press the four-way controller (5). The [E-Dial Programming 1] screen appears. Use the four-way controller (23) to select an exposure mode. Turn the - Pentax K-5 | K-5 K-5 manual - Page 285
Exposure Mode R Front E-dial b (Shutter speed) c (Aperture) em (EV Compensation) eSHIFT (Program Shift) - - o (Sensitivity) eSHIFT K (Program Shift) o (Sensitivity) m (EV Compensation) o (Sensitivity) b (Shutter speed) - b b (Shutter speed) m (EV Compensation) b (Shutter speed) o ( - Pentax K-5 | K-5 K-5 manual - Page 286
284 9 Changing Additional Settings Exposure Mode R Front E-dial - c (Aperture) m c (EV Compensation) c (Aperture) o (Sensitivity) c (Aperture) b (Shutter speed) c (Aperture) L /a - c p (Aperture) o (Sensitivity) c (Aperture) - c (Aperture) o M (Sensitivity) c (Aperture) S - Pentax K-5 | K-5 K-5 manual - Page 287
dial (main switch |) is operated, or when the shutter release button is pressed halfway. 1 Select [Button Customization] in the [A Rec. Mode 5] menu and press the four-way controller (5). 9 The [Button Customization] screen appears. 2 Use the four-way controller (23) to select a button to - Pentax K-5 | K-5 K-5 manual - Page 288
Adjust. Displays the [Composition Adjust.] screen. p.220 = button Enable AF Cancel AF The autofocus system operates. Disables autofocus with the shutter release button while the button is pressed. p.124 Preview Dial Optical Preview Digital Preview Displays the Optical Preview when the - Pentax K-5 | K-5 K-5 manual - Page 289
287 4 Press the 4 button. 5 Press the 3 button three times. The camera is ready to take a picture. 9 Changing Additional Settings - Pentax K-5 | K-5 K-5 manual - Page 290
the Beep, Date and Time, and Display Language Setting the Beep You can turn the camera operation beep on or off, or change its volume. By default, all available items are set to O (On), and the volume level is set to [3]. The following items can be set. • In-focus • AE-L (AE Lock operation sound - Pentax K-5 | K-5 K-5 manual - Page 291
] screen appears. 2 Use the four-way controller (45) World Time to select X (Destination) or W Setting the Time (Hometown) for [Setting the Destination Time]. London 16 :00 This setting is reflected on the date and time that appear in the guide display and control panel. Hometown New York - Pentax K-5 | K-5 K-5 manual - Page 292
45) to select O or P. Select O if the destination city uses daylight saving time (DST). 8 Press the 4 button. The settings are saved and the camera returns to the [World Time] screen. 9 9 Press the 3 button twice. The screen that was displayed before selecting the menu appears again. Changing - Pentax K-5 | K-5 K-5 manual - Page 293
Algiers Vancouver Johannesburg San Francisco Istanbul Los Angeles Cairo Calgary Jerusalem Denver Nairobi Chicago Jeddah Miami Tehran Toronto Dubai New York Karachi Halifax Kabul Central and South America Mexico City Lima Santiago Male Delhi Colombo Caracas Kathmandu Buenos - Pentax K-5 | K-5 K-5 manual - Page 294
Setting the Display Language You can change the language in which the menus, error messages, etc. are displayed. The camera supports the following languages: English, French, German, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek, Russian - Pentax K-5 | K-5 K-5 manual - Page 295
[R Set-up 1] menu (p.278). 1234 Date Adjustment World Time Text Size Beep Guide Display Status Screen English Standard Large 3sec. MENU Cancel OK OK Setting the Guide Display Time Set the length of time that the guides are displayed on the monitor when the camera is turned on or the exposure - Pentax K-5 | K-5 K-5 manual - Page 296
1 Select [24. Save Menu Location] in the [A Custom Setting 4] menu and press the four-way controller (5). The [24. Save Menu Location] screen appears. 2 Use the four-way controller (23) to select [Reset Menu Location] or [Save Menu Location] and press the 4 button. 24. Save Menu Location 1 Reset - Pentax K-5 | K-5 K-5 manual - Page 297
(45) to select O or P. O Displays the status screen. (default setting) P Does not display the status screen. 3 Use the four-way controller (23) to select [Auto Screen Rotation] and use the four-way controller (45) to select O or P. O If the camera is held vertically while measuring the brightness - Pentax K-5 | K-5 K-5 manual - Page 298
Dark Area] or [Enlarge Instant Review]. 5 Use the four-way controller (45) to select O or P. When [Enlarge Instant Review] is set to O (default setting), you can 9 magnify the image with the rear e-dial (S). (p.237) 6 Press the 3 button twice. The screen that was displayed before selecting the - Pentax K-5 | K-5 K-5 manual - Page 299
the monitor is hard to see. 1 Select [Brightness Level] in the [R Set-up 2] menu and press the four-way controller (5). The [Brightness Level] screen appears. 2 Use the four-way controller (45) to adjust the brightness. You can select from 15 brightness levels. The value is reset to ±0 when the - Pentax K-5 | K-5 K-5 manual - Page 300
Set-up 2] menu and press the four-way controller (5). The [LCD Color Tuning] screen appears. 2 Adjust the color. Seven levels (225 patterns) are available LCD Color Displays a saved image in the background so you can adjust the color while viewing the image. This is useful for matching the - Pentax K-5 | K-5 K-5 manual - Page 301
camera is level, as indicated on the bar graph in the viewfinder and on the LCD panel and monitor. Select whether to display the bar graph. 1 Select [Electronic Level] in the [A Rec. Mode 4] menu. 2 Use MENU Exit 3 Press the 3 button. The screen that was displayed before selecting the menu appears - Pentax K-5 | K-5 K-5 manual - Page 302
select a naming system of the folder for storing images. Date PENTX The two digits of the month and day on which the Video Out HDMI Out USB Connection Folder Name Create New Folder MENU Cancel ±0 NTSC Auto MSC Date IPMEGNPTX OK OK Creating New Folders 9 Creates a new folder on an SD Memory Card - Pentax K-5 | K-5 K-5 manual - Page 303
to a folder returns to 0001 each time a new folder is created for saving images. When the number of storable images exceeds 500, captured images are divided into folders of 500 images each. However, in Auto Bracketing shooting, images will be stored in the same folder until shooting is completed - Pentax K-5 | K-5 K-5 manual - Page 304
images. The default naming conventions are as follows depending on the [Color Space] (p.212) setting in the [A Rec. Mode 3] menu. "xxxx" indicates the file number. This is displayed as a four-digit controller (5). The [File Name] screen appears. Use the four-way controller (23) to select [Change] - Pentax K-5 | K-5 K-5 manual - Page 305
the text, move the text selection cursor to [Finish] and press the 4 button. The file name is changed. 5 Press the 3 button twice. The screen that was displayed before selecting the menu appears again. Changing Additional Settings Resetting the File Name You can reset a changed file name to its - Pentax K-5 | K-5 K-5 manual - Page 306
Battery image is displayed - when the slideshow is played back - when the camera is connected to a computer with an USB cable • If the camera turns off after the set length of time, perform one of the following operations to reactivate it. - Turn on the camera again. - Press the shutter release - Pentax K-5 | K-5 K-5 manual - Page 307
the four-way controller (5). The [Select Battery] screen appears. 2 Press the four-way controller (5). Select Battery Auto Select 3 Use the four-way controller (23) to select a battery to be prioritized and press the 4 button. MENU Select Battery Auto Select Body First Grip First Auto Select - Pentax K-5 | K-5 K-5 manual - Page 308
set the correct battery type. Usually, there is no problem using [Autodetect]. However in low temperatures and when using batteries that were stored for long periods of time, set the appropriate battery type so the camera can correctly determine the remaining battery level. 9 Changing Additional - Pentax K-5 | K-5 K-5 manual - Page 309
, shooting conditions and other information are automatically embedded in captured images in the Exif data format. You can embed photographer information in this Exif. Use the provided "PENTAX Digital Camera Utility 4" software (p.322) to check the Exif information. 1 Select [Copyright Information - Pentax K-5 | K-5 K-5 manual - Page 310
the text, move the text selection cursor to [Finish] and press the 4 button. The camera returns to the [Copyright Information] screen. Copyright Information Embed Copyright Data Photographer Copyright Holder MENU Use the four-way controller (23) to select [Copyright Holder] and enter the text in - Pentax K-5 | K-5 K-5 manual - Page 311
photograph prints by taking the SD Memory Card with recorded images to a store for printing. DPOF (Digital Print Order Format) settings allow you to specify the number of copies and whether to imprint the date. • DPOF settings cannot be applied to RAW images. • You can make DPOF settings - Pentax K-5 | K-5 K-5 manual - Page 312
6 Use the four-way controller (23) to select the number of copies. You can set up to 99 copies. K appears at the top right of the screen for images with images (up to 999). Copies 01 Date MENU Date OK OK 7 Press the 4 button. The DPOF settings for the selected image is saved and the camera - Pentax K-5 | K-5 K-5 manual - Page 313
appears again. Pixel Mapping Checks the image sensor and corrects defective pixels Pixel Mapping Cancel OK OK When the battery level is low, the message [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC50 (optional) or change to - Pentax K-5 | K-5 K-5 manual - Page 314
2] screen. Memory 12 Flash Mode Drive Mode White Balance Custom Image Sensitivity EV Compensation Flash Exposure Comp. MENU Use the four-way controller (45) to select O or P. O Settings are saved even when the camera is turned off. P Settings are cleared and returned to their default values - Pentax K-5 | K-5 K-5 manual - Page 315
. The screen that was displayed before selecting the menu appears again. • Set [File No.] to O (On) to continue the sequential numbering for the file name even if a new folder is created. Refer to "Selecting the File Number Setting" (p.301). • When the [R Set-up] menu is reset (p.335), all Memory - Pentax K-5 | K-5 K-5 manual - Page 316
314 Memo - Pentax K-5 | K-5 K-5 manual - Page 317
10 Connecting to a Computer This chapter explains how to connect the camera to your computer, install the supplied CD-ROM, etc. Manipulating Captured Images on a Computer 316 Saving Images on Your Computer 317 Using the Provided Software 320 - Pentax K-5 | K-5 K-5 manual - Page 318
system requirements to connect your camera to a computer or to use the software "PENTAX Digital Camera Utility 4" included on the CD-ROM (S-SW110). Windows OS Windows XP (SP3 or later), Windows Vista, or Windows 7 (can be run as a 32-bit application on any x64 Edition of Windows.) CPU Pentium - Pentax K-5 | K-5 K-5 manual - Page 319
for details. 1234 Brightness Level LCD Color Tuning Video Out HDMI Out USB Connection Folder Name Create New Folder MENU Cancel ±0 NTSC Auto MSC PTP OK OK 3 Press the 4 button. The setting is changed. 4 Press the 3 button. The screen that was displayed before selecting the menu appears again - Pentax K-5 | K-5 K-5 manual - Page 320
USB as a memory device. Also indicates a standard for controlling USB devices with this driver. By simply connecting a device that supports USB Mass Storage digital images and control of digital cameras via USB, standardized as ISO 15740. You can transfer image data between devices that support - Pentax K-5 | K-5 K-5 manual - Page 321
3 Turn your camera on. The camera is recognized as a removable disk or an SD Memory Card with a volume label "K-5". If the "K-5" dialog appears when the camera is turned on, select [Open folder to view files using Windows Explorer] and click the OK button. 4 Save the captured images to your computer - Pentax K-5 | K-5 K-5 manual - Page 322
the Provided Software "PENTAX Digital Camera Utility 4" is included on the CD-ROM (SSW110). Using the PENTAX Digital Camera Utility 4, you can manage images saved on your computer, and develop RAW files taken with the X and adjust the color of the images. Compatible file formats: .bmp (BMP)/.jpg - Pentax K-5 | K-5 K-5 manual - Page 323
321 3 Click [PENTAX Digital Camera Utility 4]. For Windows, proceed to Step 4. For Macintosh, follow the instructions on the screen to perform subsequent steps. 4 Select the desired language in the [Choose Setup Language] screen and click [OK]. 5 When the [InstallShield Wizard] screen appears in the - Pentax K-5 | K-5 K-5 manual - Page 324
Digital Camera Utility 4 When PENTAX Digital Camera Utility 4 is launched, the following screen (browser) appears. The screenshots used in this explanation are for Windows. Browser tab set (default setting) You can perform the file management functions such as viewing and organizing the images - Pentax K-5 | K-5 K-5 manual - Page 325
Panel can be changed by pressing the Browser, Laboratory and Custom buttons on the Tool bar. 4File Display Pane The file list and the images in the selected folder appear here. 5Status Bar Information on the selected item appears. Laboratory tab set (default setting) The control panel for adjusting - Pentax K-5 | K-5 K-5 manual - Page 326
with your needs. By default, all tab pages are displayed. Viewing Detailed Information on the Software Refer to Help for details on using the software program. 10 1 Click the button on the Tool bar. Or, select [PENTAX Digital Camera Utility Help] from the [Help] menu. Connecting to a Computer - Pentax K-5 | K-5 K-5 manual - Page 327
your software. Click [Product Registration] on the screen in Step 3 on p.321. A world map for Internet Product Registration is displayed. If your computer is connected to the Internet, click the displayed country or region and then follow the instructions to register your software. Note that you can - Pentax K-5 | K-5 K-5 manual - Page 328
326 Memo - Pentax K-5 | K-5 K-5 manual - Page 329
11 Appendix Default Settings 328 Resetting the Menus 335 Functions Available with Various Lens Combinations 337 Cleaning the CMOS Sensor 340 Optional Accessories 345 Error Messages 351 Troubleshooting 354 Main Specifications 356 Glossary 362 Index 367 WARRANTY POLICY 373 - Pentax K-5 | K-5 K-5 manual - Page 330
set in Memory (p.312) are saved even when the camera is turned off. Reset Setting Yes: The setting returns to the default setting with the reset function (p.335). No : The setting is saved even after reset. Direct Keys Item Drive Mode Flash Mode White Balance Custom Image Default Setting - Pentax K-5 | K-5 K-5 manual - Page 331
Off BA±1 (White Balance)/ ±1 (other than White Balance) Digital Filter Not use any filters HDR Capture HDR Capture Auto Align Off P (Off) Multiexposure Number of Shots Auto EV Adjustment 2 times P (Off) Interval 1 sec. Interval Shooting Number of Shots Start Interval 2 images Now Start - Pentax K-5 | K-5 K-5 manual - Page 332
330 11 Appendix Item Autofocus Method Live View Show Grid Info Overlay Histogram Bright/Dark Area Electronic Level Horizon Correction Shake Reduction Input Focal Length Display Time Instant Review Histogram Bright/Dark Area Enlarge Instant Review Histogram Digital Preview Bright/Dark - Pentax K-5 | K-5 K-5 manual - Page 333
USER Mode] screen. 331 Playback Mode Palette Item Image Rotation Digital Filter Resize Cropping Slideshow Default Setting - Toy Camera Maximum size according to the setting Maximum size according to the setting - Reset Setting - Yes*3 - - - Page p.249 p.265 p.262 p.263 p.246 Save as Manual - Pentax K-5 | K-5 K-5 manual - Page 334
According to default setting No 3 All O (On) Yes Guide Display 3 sec. Yes Status Screen O (On) Yes Status Screen Auto Screen Rotation O (On) Yes Display Color 1 Yes 11 Brightness Level ±0 Yes LCD Color Tuning ±0 Yes Video Out According to default setting No HDMI Out Auto - Pentax K-5 | K-5 K-5 manual - Page 335
Name] screen. [A Custom Setting] Menu Item 1. EV Steps 2. Sensitivity Steps 3. Expanded Sensitivity 4. Meter Operating Time 5. AE-L with AF Locked 6. Link AE to AF Point 7. Auto EV Compensation 8. Auto Bracketing Order 9. One-Push Bracketing 10. WB Adjustable Range 11. WB When Using Flash 12. AWB - Pentax K-5 | K-5 K-5 manual - Page 336
p.128 15. AF.S Setting Focus-priority Yes p.123 16. AF.C Setting Focus-priority Yes p.123 17. AF Assist Light On Yes p.124 18. AF with Remote Control Off Yes p.148 19. Remote Control in Bulb 20. Release While Charging Mode1 Off Yes p.116 Yes p.82 21. Flash in Wireless Mode On Yes - Pentax K-5 | K-5 K-5 manual - Page 337
settings. Language/u, Date Adjustment, the city and DST settings for World Time, Text Size, Video Output, Copyright Information screen appears. 2 Press the four-way controller (2) to select [Reset] and press the 4 button. Reset Returns to default settings The settings are reset, and the screen - Pentax K-5 | K-5 K-5 manual - Page 338
Setting] menu to default values. 1 Select [Reset Custom Functions] in the [A Custom Setting 4] menu and press the four-way controller (5). The [Reset Custom Functions] screen appears. 2 Press the four-way controller (2) to select [Reset] and press the 4 button. The settings are reset, and the - Pentax K-5 | K-5 K-5 manual - Page 339
are restricted. × : Functions are unavailable. Lens DA FA J F *6 A [Mount type] DA L FA *6 D FA Function [KAF] [KAF] [KAF] [KA] [KAF2] [KAF2] [KAF3] Autofocus (Lens only) (With AF adapter 1.7×)*1 z z z - - - - #*9 Manual focus (With the focus indicator)*2 (With matte field) Quick - Pentax K-5 | K-5 K-5 manual - Page 340
28 mm F2.8 lens, set [27. Using Aperture Ring] to [Permitted] in the [A Custom Setting 4] menu. Pictures can be taken with the aperture you set, but only within manual aperture range. *7 Only available with KAF2 mount FA lenses. *8 Only available with compatible lenses (FA 31mm F1.8 Limited, FA 43mm - Pentax K-5 | K-5 K-5 manual - Page 341
2 Permitted Shutter will release when aperture ring is not set to the "A" position MENU Cancel OK OK Restrictions on using lenses with aperture ring set to a position other than s Lens Used Exposure Mode Restriction D FA, FA, F, A, M (lens only or with auto diaphragm accessories such as auto - Pentax K-5 | K-5 K-5 manual - Page 342
dusty, shadows may appear in the image in certain situations such as when shooting against a white background. This indicates that the CMOS sensor must be cleaned. Removing Dust with Ultrasonic Vibrations (Dust Removal) Dust adhering to the CMOS sensor is removed by applying ultrasonic vibrations - Pentax K-5 | K-5 K-5 manual - Page 343
is saved. If more than 30 minutes elapse, save a new Dust Alert image and then perform sensor cleaning. • The saved Dust Alert image cannot be displayed in Playback mode. • The Dust Alert image is saved only when an SD Memory Card is inserted. 1 Select [Dust Alert] in the [R Set-up 4] menu and press - Pentax K-5 | K-5 K-5 manual - Page 344
Fully display a white wall or other bright subject with no detail in the viewfinder and press the shutter release button fully. Dust Alert Checks for dust on the sensor. Press shutter release button to reveal dust location After image processing is performed, the Dust Alert image appears. If the - Pentax K-5 | K-5 K-5 manual - Page 345
from accumulating on the CMOS sensor, keep the lens mount cap on the camera when a lens is not attached. • When the battery level is low, the message [Not enough battery power remaining to clean sensor] is displayed on the monitor. • It is recommended to use the AC adapter kit K-AC50 (optional) when - Pentax K-5 | K-5 K-5 manual - Page 346
controller (2) to select [Mirror Up] and press the 4 button. The mirror is locked in the up position. If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the Dust Alert image appears on the monitor. Clean the sensor while checking the location of the dust. Clean the CMOS - Pentax K-5 | K-5 K-5 manual - Page 347
for this camera. Contact a PENTAX Service Center for details regarding accessories. Products marked with an asterisk (*) are the same as those supplied with the camera. Power Supply Accessories Battery Charger kit K-BC90 (*) (Kit includes Battery Charger D-BC90 and AC plug cord.) Rechargeable - Pentax K-5 | K-5 K-5 manual - Page 348
AF160FC The AF160FC is a flash system especially designed for macro photography to take close, shadowless pictures of small objects. It is compatible 11 with existing TTL auto flash functions and it can be used with a wide range of PENTAX cameras by using provided adapter rings. AF360FGZ AF200FG - Pentax K-5 | K-5 K-5 manual - Page 349
347 Hot Shoe Adapter FG Extension Cord F5P Off-camera Shoe Adapter F Use the adapters and cords to use the external flash away from the camera. Hot Shoe Adapter FG Off-camera Shoe Clip CL-10 When using the AF540FGZ or AF360FGZ as a wireless flash, this large clip is used for setting the external - Pentax K-5 | K-5 K-5 manual - Page 350
. If it is difficult to see the viewfinder image clearly, choose one of the eight correction of approximately -5 to +3m-1 (per meter). ME Viewfinder Cap (*) Eyecup FR (*) Ref-converter A Diopter correction lens adapter M Interchangeable Focusing Screen AF Frame Matte MF-60 (*) AF Divided Matte - Pentax K-5 | K-5 K-5 manual - Page 351
release button. The cord length is 0.5 m. Remote Control Used for Remote Control shooting. Operating distance for remote control From the front of camera: approx. 4 m From the back of camera: approx. 2 m Remote Control F Remote Control Waterproof O-RC1 Camera Case/Strap Camera Case O-CC90 11 Camera - Pentax K-5 | K-5 K-5 manual - Page 352
350 Imagesensor Cleaning Kit O-ICK1 Use this kit to clean the optical parts such as the CMOS sensor and lens of this camera. Others Body Mount Cap K Hot Shoe Cover FK (*) USB Cable I-USB7 (*) AV Cable I-AVC7 (*) Sync Socket 2P Cap (*) 11 Appendix - Pentax K-5 | K-5 K-5 manual - Page 353
on another brand of camera or your computer. No card in the camera The SD Memory Card is not inserted in the camera. (p.55) Cannot use this card The inserted SD Memory Card is not compatible with this camera. Memory card error The SD Memory Card has a problem, and image capture and playback - Pentax K-5 | K-5 K-5 manual - Page 354
. Settings not stored The DPOF settings could not be saved because SD Memory Card is full. Delete unwanted images and perform DPOF setting again. (p.84) The operation could not be completed correctly The camera was unable to measure the manual white balance or detect dust on the sensor. Try the - Pentax K-5 | K-5 K-5 manual - Page 355
Aperture Ring] is set to [Prohibited] in the [A Custom Setting 4] menu and the lens aperture ring is set to a position other than s, or a lens without an s position is being used. This function is not available You are trying to set a function that is not in the current mode available in B (Green - Pentax K-5 | K-5 K-5 manual - Page 356
is no available Insert an SD Memory Card with available space on the SD space or delete unwanted images. (p.55, Memory Card p.84) Recording Wait until recording is finished. Autofocus cannot focus well on subjects that have low contrast (the sky, white walls, etc.), dark colors, intricate - Pentax K-5 | K-5 K-5 manual - Page 357
focus mode is set to k (A). The camera will continue focusing on the subject while the shutter release button is pressed halfway. If there is a subject that you wish to focus on, slide the focus mode lever to l and use the focus lock. (p.130) The AE Lock function does not operate The built-in flash - Pentax K-5 | K-5 K-5 manual - Page 358
auto-exposure SLR digital-still camera with built-in retractable P-TTL flash PENTAX KAF2 bayonet mount (AF coupler, lens information contacts, K-mount with power contacts) KAF3, KAF2 (power zoom compatible), KAF, KA mount lenses Image Capture Unit Image Sensor Primary color filter, CMOS, Size: 23 - Pentax K-5 | K-5 K-5 manual - Page 359
. 100% Approx. 0.92× (50 mm F1.4 • ∞) Approx. 21.7 mm (from the view window), Approx. 24.5 mm (from the center of lens) Approx. -2.5 to +1.5m-1 Interchangeable Natural-Bright-Matte III focusing screen 357 Live View Type TTL method using CMOS image sensor Focusing Mechanism Contrast detection - Pentax K-5 | K-5 K-5 manual - Page 360
spot metering EV0 to 22 (ISO100 50mm F1.4) Green, Program, Sensitivity Priority, Shutter Priority, Aperture Priority, Shutter & Aperture Priority, Manual, Bulb, Flash X-sync Speed ±5 EV (1/2 EV steps or 1/3 EV steps can be selected) Available via dedicated AE Lock button (timer type: two times the - Pentax K-5 | K-5 K-5 manual - Page 361
Correction, Shadow Correction Lens Correction Distortion Correction, Lateral Chromatic Aberration Correction Cross Processing Random, Preset 1-3, Favorite 1-3 Digital Filter Toy Camera, Retro, High Contrast, Extract Color, Soft, Starburst, Fish-eye, Custom Filter HDR Capture Auto, Standard - Pentax K-5 | K-5 K-5 manual - Page 362
folder, delete instant review image Digital Filter Toy Camera, Retro, High Contrast, Sketch Filter, Water Color, Pastel, Posterization, Miniature, Base Parameter Adjustment, Monochrome, Color, Extract Color, Soft, Starburst, Fish-eye, Slim, HDR, Custom Filter RAW Development File Format (JPEG - Pentax K-5 | K-5 K-5 manual - Page 363
battery and SD Memory Card) Accessories Package Contents Software USB Cable I-USB7, AV Cable I-AVC7, Strap O-ST53, ME Viewfinder Cap, Rechargeable Lithium-ion Battery D-LI90, Battery Charger D-BC90, AC plug cord, Software (CD-ROM) S-SW110 Eyecup FR, Hot shoe cover FK, Body - Pentax K-5 | K-5 K-5 manual - Page 364
that determines focus. In this camera, select from [Auto], [Select] and [Center]. Aperture The aperture increases or reduces the light beam (thickness) passing through the lens to the CMOS sensor. Bright Portion Overexposed area in an image loses contrast and appears white. 11 Camera Shake (Blur - Pentax K-5 | K-5 K-5 manual - Page 365
sensor Photography element which converts light entering through the lens into electric signals that create an image. Color Space A defined range of colors from the spectrum which are used. In digital cameras, [sRGB] is defined as the standard by Exif. In this camera, [AdobeRGB], which supports - Pentax K-5 | K-5 K-5 manual - Page 366
expressing the light level reproducible in an image. This is the same as the term "Exposure latitude" used with silver halide film. Generally, when the dynamic (Exchangeable image file format for digital still camera) A standard digital camera file format established by the Japan Electronics and - Pentax K-5 | K-5 K-5 manual - Page 367
susceptible to noise. JPEG An image compression format. Although the image quality deteriorates a little, images can be compressed to a smaller file size than with TIFF and other formats. In this camera, select from Z (Premium), C (Best), D (Better), or E (Good). Images recorded in JPEG format are - Pentax K-5 | K-5 K-5 manual - Page 368
366 RAW data Unedited image data output from the CMOS sensor. RAW data is data before being internally processed by the camera. Camera settings at the time of capture, such as White Balance, Contrast, Saturation, and Sharpness can be set for each frame after shooting. In addition, RAW data is 14 bit - Pentax K-5 | K-5 K-5 manual - Page 369
of the monitor ..... 297 Built-in flash 77 Bulb Mode p 115 Button Customization 285 C Cable release terminal 19 11 Cable switch 116, 349 Calendar display 240 Camera shake 362 Card access lamp 19 Catch-in Focus 134 Center-weighted metering .... 118 Charging the battery 49 Appendix - Pentax K-5 | K-5 K-5 manual - Page 370
263 Cross Processing 225 f (White Balance 205 Custom Filter (Digital Filters 163, 266 Custom Image 222 [A Custom Setting] Menu 91, 333 Customizing buttons and dials 282 D Dark portions 214, 363 Date Adjustment 67 11 Date change 289 Daylight (White Balance) ......205 Daylight-Sync shooting - Pentax K-5 | K-5 K-5 manual - Page 371
Filter 266 HDR Capture 215 Help 324 High Contrast (Digital Filter 162, 265 High dynamic range 215 High/Low Key Adjustment (Custom Image 222 High-ISO NR 98 Highlight Correction 214 High-Speed Flash Sync mode (flash 189 Histogram 32, 364 Hometown 64, 289 Horizon Correction 140 Hot shoe 19 - Pentax K-5 | K-5 K-5 manual - Page 372
, 60 Live View 165 Locking the exposure ...121, 131 Locking the focus 130 U button 21, 168 M a (Hyper-manual) Mode ......112 Macintosh 316 Main switch 20, 23, 62 Manual focus 132 Manual White Balance .........208 Mass Storage Class 318 Matte field 133 Memory 312 Memory card 55 11 3 button - Pentax K-5 | K-5 K-5 manual - Page 373
(Digital Filter) ...... 162, 265 Rotate 249 S Saturation (Custom Image 222 Save as Manual WB 213 Save Settings 227 SD Memory Card 55 Select & Delete 250 Select Battery 305 Self-timer 143 Sensitivity 95 Sensitivity Priority Mode K 105 Sensor Cleaning .......... 340, 343 Shade (White Balance - Pentax K-5 | K-5 K-5 manual - Page 374
Text Size 64, 293 Toning (Custom Image) .......222 Toy Camera (Digital Filter 162, 265 Trailing Curtain Sync ....184, 194 Tungsten Light (White Balance 205 TV 256 b (Shutter Priority) Mode ....107 U USB Connection 317 USB Connection mode .........317 USER Mode 227 V Vertical position 29 Video - Pentax K-5 | K-5 K-5 manual - Page 375
or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by nonauthorized PENTAX service facilities. Procedure During 12-month Warranty Period Any PENTAX which proves defective during the 12-month - Pentax K-5 | K-5 K-5 manual - Page 376
, instruct the service station to proceed with the servicing. • This warranty policy does not affect the customer's statutory rights. • The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the - Pentax K-5 | K-5 K-5 manual - Page 377
the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, Perchlorate Material-special handling may apply. The lithium battery used in this camera contains perchlorate material, which may require special handling. - Pentax K-5 | K-5 K-5 manual - Page 378
for Class B Personal Computers and Peripherals We: Located at: PENTAX Imaging Company A Division of PENTAX of America, Inc. 600 12th Street, Suite 300 Golden, Product Name: PENTAX Digital Still Camera Model Number: X Contact person: Customer Service Manager Date and Place: October, 2010, Colorado - Pentax K-5 | K-5 K-5 manual - Page 379
to the dealer, even when you don't purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a designation for the chemical element or - Pentax K-5 | K-5 K-5 manual - Page 380
Memo - Pentax K-5 | K-5 K-5 manual - Page 381
Memo - Pentax K-5 | K-5 K-5 manual - Page 382
Memo - Pentax K-5 | K-5 K-5 manual - Page 383
.pentax.de) PENTAX Imaging Systems PENTAX House, Heron Drive, Langley, Slough, Berks Limited SL3 8PN, U.K. (http://www.pentax.co.uk) PENTAX Imaging Company A Division of PENTAX of America, Inc. (Headquarters) 600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A. (PENTAX Service Department
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
 |
 |
For optimum camera performance, please read the
Operating Manual before using the camera.
Operating Manual
SLR Digital Camera