Pfaff creative 1467 Owner's Manual - Page 36
Important
View all Pfaff creative 1467 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 Replacing the fuse Pull out the mains plug. Turn fuse hol der A left a quarter turn with a screw driver, release it and take it out. Pull out fuse 8. Insert a new fuse in the hol der, replace the holder, push it in with the screwdriver, then turn it right a quarter turn. (The fuse type is F2A.) 1 10-volt machines have no fuse. / Important When the machine is switched on by actuating the master switch, the sewing light goes on and program 00 (straight stitching with the needle in its middle position) appears in the display. If a program is entered during sewing, it will not become effective until the machine has stopped and the foot control is pressed again. Stitch length and stitch width can be changed during sewing. For bobbin winding disengage the sewing mechanism. After bobbin winding make sure you re-engage the sewing mechanism. Owing to the use of electronic compo nents, the machine will warm up. This is quite normal. I 32