Philips 107T66 User manual

Philips 107T66 Manual

Get Philips 107T66 PDF manuals and user guides View all Philips 107T66 manuals
Add to My Manuals
Save this manual to your list of manuals

Philips 107T66 manual content summary:

  • Philips 107T66 | User manual - Page 1
    electronic user's manual file:///D|/EDFU/crt_17_6/edoc/english/107T/manual.html2005-04-08 ¤W¤È 11:31:40
  • Philips 107T66 | User manual - Page 2
    from the power supply before cleaning. q When positioning the monitor, make sure the power plug and outlet are easily accessible. Consult a service technician if the monitor does not operate normally when operating instructions of this manual are followed. RETURN TO TOP OF THE PAGE file:///D|/EDFU
  • Philips 107T66 | User manual - Page 3
    About This Electronic User's Manual About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup,
  • Philips 107T66 | User manual - Page 4
    About This Electronic User's Manual q Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This you how to avoid the problem. SMART HELP: This icon indicates helpful information when adjusting the On Screen Display of your monitor. Some warnings may appear
  • Philips 107T66 | User manual - Page 5
    User's Manual RETURN TO TOP OF THE PAGE ©2005 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics
  • Philips 107T66 | User manual - Page 6
    107T60 TCO'03 107T61 MPRII 107T66 MPRII Color Gray Gray Black 107T6 q 17-inch (16.0" VIS) color monitor with excellent front of THE PAGE Introduction Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT (picture tube) monitor. LightFrame™ will
  • Philips 107T66 | User manual - Page 7
    that have been built to use this software. Earlier Philips monitors or other manufacturers' monitors will not work with this special software. It is recommended that you install this software only on a Philips monitor designed to use it. These monitors can be identified by the LightFrame™ logo on
  • Philips 107T66 | User manual - Page 8
    the LightFrame™ 2 software on a LightFrame™ 1 monitor. Q:What is the difference between LightFrame™ 1, LightFrame™ 2 and LightFrame™ 3? A:LightFrame™ 1 was the very first generation of the LightFrame™ feature introduced by Philips. In that version the user needs to manually turn on/off the feature
  • Philips 107T66 | User manual - Page 9
    use LightFrame™ with Netscape, but its functions are limited to manually highlighting the entire Netscape client window. Since LightFrame™ is specifically ™ is doing on your monitor. This sharpness improves a photo or video significantly however on black text on a light background the effect is less
  • Philips 107T66 | User manual - Page 10
    monitors display this logo on their front bezel: RETURN TO TOP OF THE PAGE Lead-free product Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic
  • Philips 107T66 | User manual - Page 11
    107T Product Information SCANNING • Horizontal scanning • Vertical scanning 30 - 71 KHz 50 - 160 Hz VIDEO • Video dot rate • Input impedance - Video - Sync • Input signal levels • Sync input signal • Sync polarities 120 MHz 75 ohm 4.7 kOhm 0.7 Vpp Separate sync Positive and negative WHITE COLOR
  • Philips 107T66 | User manual - Page 12
    , scanners, etc.) Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen. Important with
  • Philips 107T66 | User manual - Page 13
    107T Product Information Physical Specifications RETURN TO TOP OF THE PAGE • Dimensions 15.6" x 15.1" x 16.7" / 397 x 383 x 424 mm (including base) 15.6" x 13.1" x 16.7" / 397 x 333 x 424 mm (excluding base) • Weight 15.0 kg • Power supply 100-240 VAC, 60-50Hz (Please refer to rating label)
  • Philips 107T66 | User manual - Page 14
    V. Sync (VCLK for DDC) 15 Data clock line (SCL) RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components. Front View Rear View RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107T/PRODUCT/PRODUCT.HTM (9 of 9)2005-04
  • Philips 107T66 | User manual - Page 15
    Front View • Rear View • 6G3B11 Multimedia Base (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the "-" button is pressed, the adjustment controls for the
  • Philips 107T66 | User manual - Page 16
    "-" and "+" buttons, are used for adjusting the OSD of your monitor. LightFrame™ hotkey. When the button is pressed, the highbrightness function of LightFrame™ will show up. High Bright hot key delivers 4 suitable brightness instantly for text,
  • Philips 107T66 | User manual - Page 17
    Installing your Monitor 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/install_6/INSTALL.htm (3 of 3)
  • Philips 107T66 | User manual - Page 18
    of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides userfriendliness and ease-of-use when operating the
  • Philips 107T66 | User manual - Page 19
    of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below. file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (2 of 4)2005-04-08 ¤W¤È 11
  • Philips 107T66 | User manual - Page 20
    On-Screen Display RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (3 of 4)2005-04-08 ¤W¤È 11:31:46
  • Philips 107T66 | User manual - Page 21
    On-Screen Display file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/OSDDESC.HTM (4 of 4)2005-04-08 ¤W¤È 11:31:46
  • Philips 107T66 | User manual - Page 22
    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •
  • Philips 107T66 | User manual - Page 23
    signify? The "Designed for Windows" logo means your Philips monitor fulfills the requirements and recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WHQL tests. 2. What models are Mac compatible? All listed Philips monitors are Mac compatible. BUT, you may need an
  • Philips 107T66 | User manual - Page 24
    jitter. TCO99: Tightened TCO95 rules. TCO'03: Tighten TCO99 rule for CRT and new requirement of screen color for TFT LCD Monitors. Ecology: MPRII: No requirement. TCO92: No requirement. TCO95: Set general ecological standards including recycling preparation, environmental policy and environmental
  • Philips 107T66 | User manual - Page 25
    ". Select "All default selection" and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your PC supports power saving. 7. What is refresh rate? "Refresh rate" describes
  • Philips 107T66 | User manual - Page 26
    to factory settings" to restore all settings. 12. What is LightFrame ? LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor 's brightness and sharpness. With LightFrameTM, the user experiences TV quality performance for video or
  • Philips 107T66 | User manual - Page 27
    affect monitor life. Today's stateof-the-art Philips monitors employ improved phosphors and are designed for high light output. a monitor 's maximum average brightness within acceptable levels. 17. I get a message warning that my monitor 'may not support LightFrame '. I am certain my monitor does
  • Philips 107T66 | User manual - Page 28
    the LightFrame does not function. 19. What is "XtraSpace Design" (XSD)? XSD stands for XtraSpace Design, a Philips breakthrough that reduces a CRT display device's footprint. Philips XSD monitors combine the world's smallest front-to-back footprint with excellent front of screen performance. 20. How
  • Philips 107T66 | User manual - Page 29
    requirements. In fact, it hardly uses any extra space at all: monitor depth and width are unchanged. Only the monitor's height is increased by only 3 centimeters. 25. Where can I buy a multimedia base to incorporate with my Philips monitor? file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (7 of 13)2005
  • Philips 107T66 | User manual - Page 30
    ended. Auto Calibrate regularly readjusts color temperature and luminance to their original values. 27. How does Philips Auto Calibrate feature benefit me? With Auto Calibrate, it takes a monitor's luminance 33 percent longer to deteriorate to the 50 percent level that marks the end of a display
  • Philips 107T66 | User manual - Page 31
    sleep mode/stand-by mode. 30. Which models of Philips monitors are equipped with Auto Calibrate feature? Auto Calibrate is currently Cable is properly connected q Ensure the BNC/D-Sub connector on the rear of the monitor is in the correct position, newer models have this option in the On Screen
  • Philips 107T66 | User manual - Page 32
    . My monitor appears to be missing one or more colors. How do I correct this? q If the OSD menu is also missing a color, please contact service for details standard, not just for Philips monitors. Please be aware that not all models in the Philips range has this manual degauss function. Some models
  • Philips 107T66 | User manual - Page 33
    it to be set at 0.7V. Please review the following for possible solutions: q If the OSD menu is also dim, please contact service for repair q Reset the monitor via the OSD menu q Change the color temperature settings to 9300 color coordination via the OSD menu file:///D|/EDFU/crt_17_6/edoc/english
  • Philips 107T66 | User manual - Page 34
    thin horizontal lines on the screen of my Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 202P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the electron beams with the phosphors on the screen
  • Philips 107T66 | User manual - Page 35
    does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be restored. file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (13
  • Philips 107T66 | User manual - Page 36
    W X Y Z A Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered
  • Philips 107T66 | User manual - Page 37
    source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest
  • Philips 107T66 | User manual - Page 38
    unexcited phosphor, which is governed by the degree with which ambient light is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other tubes. Convergence error Bean misalignment causing
  • Philips 107T66 | User manual - Page 39
    electron beams emitted by a cathode are periodically scanned across a phosphor screen by means of deflection circuitry. A special form of the cathode-ray tube is the TV and monitor the monitor controller to be automatically configured to make optimal use of the display without manual user
  • Philips 107T66 | User manual - Page 40
    that gradually decays to demagnetize the tube. Some monitors offer a manual degaussing facility that can be activated at any to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color
  • Philips 107T66 | User manual - Page 41
    circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to limit electromagnetic emissions from monitors. There are currently file:///D|/EDFU/crt_17_6/edoc/english/GLOSSARY/GLOSSARY.HTM (6 of 22)2005-04-08 ¤W¤È 11:31:49
  • Philips 107T66 | User manual - Page 42
    radiation emitted by monitors, and has now electron beam scanning-in each line of the picture; and frame flicker (or field flicker if the picture is interlaced) caused by the frame repetition rate of 50 frames/second. Frame flicker is noticeable with GUI and DTP software (which have a light
  • Philips 107T66 | User manual - Page 43
    Glossary problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age. RETURN TO TOP OF THE PAGE H Hertz The unit of
  • Philips 107T66 | User manual - Page 44
    Glossary INF file (Information File) Information (INF) files store information in a specific format. The set-up functions retrieve information from the INF file to use when performing installation operations. Examples of the type of information stored in an INF file include INI and registry changes,
  • Philips 107T66 | User manual - Page 45
    on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic radiation standards. Low-frequency electric and magnetic fields file
  • Philips 107T66 | User manual - Page 46
    . These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the principle of better safe than sorry. Currently, there are two areas
  • Philips 107T66 | User manual - Page 47
    PAGE O OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan The practice in which areas without useful video information are scanned outside
  • Philips 107T66 | User manual - Page 48
    smallest element of the picture that can be displayed on the screen. The smaller the pixel size, the better the resolution of the monitor. Pixel size is determined by the size of the electron spot on the screen and not necessarily by the phosphor dot pitch (the size of the triad). Thus
  • Philips 107T66 | User manual - Page 49
    TO TOP OF THE PAGE R Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number be horizontal. Because of the magnetic field of earth, the screen of monitor will be tilt when the screen faces toward the different direction. RETURN TO
  • Philips 107T66 | User manual - Page 50
    Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically a spinning and spraying process. It operates by diffusing reflected light to blur images of light sources on the screen. To provide antistatic properties, the coating
  • Philips 107T66 | User manual - Page 51
    over other screen treatments: It doesn't diffuse or scatter reflected light, so picture contrast and sharpness remain completely unimpaired. It's also , anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software to automatically detect cable connection status
  • Philips 107T66 | User manual - Page 52
    sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1. Separate sync: Horizontal and Vertical sync signals transmitted separately 2. Composite sync: Horizontal and vertical sync pulses
  • Philips 107T66 | User manual - Page 53
    colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors. Video standards such as MDA, CGA and EGA are based on TTL level. RETURN TO TOP OF THE
  • Philips 107T66 | User manual - Page 54
    between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the status and control commands permit the host to configure a hub and to monitor and control its ports. Device A logical or physical entity that performs a
  • Philips 107T66 | User manual - Page 55
    closest to the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic. UPS (Universal Power Supply) The monitor with UPS feature can work in different countries with various mains voltage. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english
  • Philips 107T66 | User manual - Page 56
    square shaped waveforms that define the start of a new frame. VESA Video Electronic Standards Association, a consortium of manufacturers formed to establish and maintain industry-wide standards for video cards and monitors. VESA was instrumental in the introduction of the Super VGA and Extended VGA
  • Philips 107T66 | User manual - Page 57
    , which maps to the screen. A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor. These cards comply with various standards that determine the nature and quality of the display. VGA (Video Graphics Array), introduced in
  • Philips 107T66 | User manual - Page 58
    save the image; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. 107C.pdf 107E.pdf 107G.pdf 107H.pdf 107S.pdf English language
  • Philips 107T66 | User manual - Page 59
    Download and Print 107T.pdf 107Q.pdf file:///D|/EDFU/crt_17_6/edoc/english/DOWNLOAD/DOWNLOAD.HTM (2 of 2)2005-04-08 ¤W¤È 11:31:50
  • Philips 107T66 | User manual - Page 60
    Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this problem? Check these items No Picture (Power LED not lit) q Make
  • Philips 107T66 | User manual - Page 61
    cable and/or video switch box. q Face the monitor toward the East for the best picture quality. q Check to make sure Moiré is switched off. q Adjust Sync Input. q Increase your refresh rate. q Refer to the instructions and troubleshooting information in that chapter. file:///D|/EDFU/crt_17_6/edoc
  • Philips 107T66 | User manual - Page 62
    Troubleshooting For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107T/SAFETY/saf_troub.htm (3 of 3)2005-04-08 ¤W¤È 11:31:58
  • Philips 107T66 | User manual - Page 63
    (nur Deutschland) • Philips End-of-Life Disposal • Information for UK only Safety Precautions and Maintenance • Troubleshooting • Other Related Information adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned,
  • Philips 107T66 | User manual - Page 64
    Regulatory Information This product meets the requirements for the TCO' 99 scheme which provides for international and environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska
  • Philips 107T66 | User manual - Page 65
    demands that mercury is not present in any of the electrical or electronics components associated with the labeled unit. CFCs (freons) The relevant TCO layer in the stratosphere, causing increased reception on earth of ultraviolet light with increased risks e.g. skin cancer (malignant melanoma) as a
  • Philips 107T66 | User manual - Page 66
    ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy q Energy-saving mode after a certain time-beneficial
  • Philips 107T66 | User manual - Page 67
    gov.tw For help and service, please contact Consumers Information Center or F1rst Choice Contact Information Center in each country or the following team of Environmental specialist can help. Mr. Job Chiu - Environment manager Philips Electronics Industries (Taiwan) Ltd, Monitor Business Unit E-mail
  • Philips 107T66 | User manual - Page 68
    Regulatory Information Mr. Maarten ten Houten - Senior Environmental Consultant Philips Consumer Electronics E-mail: [email protected] Tel: +31 (0) 40 27 33402 Ms. Delmer F. Teglas Philips Electronics North America E-mail: [email protected] Tel: +1 865 521 4322 RETURN TO TOP OF
  • Philips 107T66 | User manual - Page 69
    PHILIPS 107T6* This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports used in accordance with the instructions, may cause harmful interference to
  • Philips 107T66 | User manual - Page 70
    . Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à
  • Philips 107T66 | User manual - Page 71
    this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. Class B ITE file:///D|/EDFU/crt_17_6/edoc/english/107T/SAFETY/regs/regulat.htm (9 of 15)2005-04-08 ¤W¤È 11:32:00
  • Philips 107T66 | User manual - Page 72
    Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have
  • Philips 107T66 | User manual - Page 73
    Regulatory Information RETURN TO TOP OF THE PAGE North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS
  • Philips 107T66 | User manual - Page 74
    Regulatory Information Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI
  • Philips 107T66 | User manual - Page 75
    and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal
  • Philips 107T66 | User manual - Page 76
    Regulatory Information WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved
  • Philips 107T66 | User manual - Page 77
    Regulatory Information 2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 3. The BROWN wire must be connected to the terminal which marked with the letter "L" or coloured RED. Before replacing the plug cover, make certain that the cord grip is
  • Philips 107T66 | User manual - Page 78
    Other Related Information Other Related Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Information for Users in the U. S. • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed
  • Philips 107T66 | User manual - Page 79
    6G3B11 Multimedia Base (option) 6G3B11 Multimedia Base (option) Front View • Rear View • Technical Specifications • Description of the Controls • Installing your Multimedia Base • Power adapter Installation Technical Specifications* • Output power • Bass Boost • Headphone connection • Microphone
  • Philips 107T66 | User manual - Page 80
    6G3B11 Multimedia Base (option) C. Headphone jack Attach your headphones here. The loudspeakers will automatically switch off once headphones are connected. D. Microphone jack Attach your microphone here. E. Audio In Connect this to the audio output of your PC. F. MIC Out Connect this to the
  • Philips 107T66 | User manual - Page 81
    the bottom plate of your monitor. 2. To UN-INSTALL q Lift the back hook from the hole on the bottom plate of your monitor. q Slide out the of installing the adapter A. T-connector B. Wall more connector Monitor T-connector file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm
  • Philips 107T66 | User manual - Page 82
    Multimedia Base DC input PC Note: PC power cord. Transformer Power outlet Please keep transformer away from monitor as far as possible ( at least 50 cm ) to avoid cansing unstable monitor picture. file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (4 of 5)2005-04-08 ¤W¤È 11:32:07
  • Philips 107T66 | User manual - Page 83
    6G3B11 Multimedia Base (option) RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/install_6/mm_pede/mm_inst.htm (5 of 5)2005-04-08 ¤W¤È 11:32:07
  • Philips 107T66 | User manual - Page 84
    To adjust your screen's brightness, follow the steps below. Brightness is the overall intensity of the light coming from the screen. A 50% brightness is recommended. 1) Press the button on the monitor. The BRIGHTNESS window appears. 2) Press the or button to adjust the brightness. 3) When the
  • Philips 107T66 | User manual - Page 85
    To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. 1) Press the button on the monitor. The CONTRAST window appears. 2) Press the or button to adjust the contrast. 3) When the
  • Philips 107T66 | User manual - Page 86
    The OSD Controls 3) Press the or button until the desired language is highlighted. 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (3 of
  • Philips 107T66 | User manual - Page 87
    increases or decreases the size of the images on your screen. To adjust the ZOOM follow the steps below. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button. The ZOOM window appears. 4) Press the or button to
  • Philips 107T66 | User manual - Page 88
    your screen, pushing it out toward the left and right sides or pulling it in toward the center. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST HORIZONTAL is highlighted. 3) Press the highlighted. button. The ADJUST HORIZONTAL window appears
  • Philips 107T66 | User manual - Page 89
    The OSD Controls 4) Press the or button to move the image to the left or right. 5) When the position is adjusted, press the press to confirm. button to confirm. Press the to highlight SIZE, 6) To adjust the horizontal size, press the or button. 7) When the size is adjusted, press the
  • Philips 107T66 | User manual - Page 90
    image on your screen, pushing it out toward the top or bottom or pulling it in toward the center. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST VERTICAL is highlighted. 3) Press the highlighted. button. The ADJUST VERTICAL window appears
  • Philips 107T66 | User manual - Page 91
    The OSD Controls 4) Press the or button to move the image up or down. 5) When the position is adjusted, press the button. Press CONTROLS window, or press the to highlight SIZE and again to return to MAIN to confirm. 6) To adjust the vertical size, press the or button. 7) When the size is
  • Philips 107T66 | User manual - Page 92
    two options are PINCUSHION and BALANCED pincushion. Note: use these features only when the picture is not square. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. 3) Press the highlighted. button. The ADJUST SHAPE window
  • Philips 107T66 | User manual - Page 93
    The OSD Controls 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. Press to confirm. 5) To adjust the pincushion, press the or button,press the to confirm. 6) When the pincushion is adjusted, press the confirm. button to highlight BALANCED. Press to file
  • Philips 107T66 | User manual - Page 94
    two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when the picture is not square. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (11
  • Philips 107T66 | User manual - Page 95
    The OSD Controls 3) Press the highlighted. button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be 4) Press the button to highlight ADJUST SIDE ANGLES. 5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted, press to confirm. file:///D|/EDFU/crt_17_6/
  • Philips 107T66 | User manual - Page 96
    The OSD Controls 6) To adjust the trapezoid, press the or button. 7) When the trapezoid is adjusted, press the button to confirm. Then PARALLELOGRAM, press to confirm. to highlight 8) To adjust the parallelogram, highlight parallelogram then to confirm. Press the or button to adjust.. 9)
  • Philips 107T66 | User manual - Page 97
    two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not square. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. 3) Press the highlighted. button. The ADJUST SHAPE window
  • Philips 107T66 | User manual - Page 98
    window. BACK TO MAIN CONTROLS should be highlighted. 8) Press the button to return to MAIN CONTROLS. RETURN TO TOP OF THE PAGE ADJUST COLOR Your monitor has three preset options you can choose from. The first option is for GENERAL USE, which is fine for most applications. The second option is
  • Philips 107T66 | User manual - Page 99
    RETOUCH, which is for working with pictures you have imported into your computer and want to alter. When you select one of these options, the monitor automatically adjusts itself to that option. There is also a fourth option, USER PRESET, which allows you to adjust the colors on your screen to
  • Philips 107T66 | User manual - Page 100
    The OSD Controls 4) Press the or button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT, 5500K for PHOTO RETOUCH, or USER PRESET. 5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the button to confirm you selection. Press again to return to the
  • Philips 107T66 | User manual - Page 101
    PAGE RESET TO FACTORY SETTINGS RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until RESET TO FACTORY SETTINGS is highlighted. file:///D|/EDFU/crt_17_6/edoc/english/OSD_2
  • Philips 107T66 | User manual - Page 102
    The OSD Controls 3) Press the button. The RESET TO FACTORY SETTINGS window appears. 4) Press the or button to select YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and press again return to the MAIN
  • Philips 107T66 | User manual - Page 103
    features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS is highlighted. 3) Press the button. The EXTRA CONTROLS window appears
  • Philips 107T66 | User manual - Page 104
    , follow the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be affected. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press button until EXTRA CONTROLS is highlighted. file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (21 of
  • Philips 107T66 | User manual - Page 105
    The OSD Controls 3) Press the highlighted. button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be 4) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted, press to confirm. file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (22 of 24)2005-04-08 ¤W¤È 11:
  • Philips 107T66 | User manual - Page 106
    The OSD Controls 5) To adjust the horizontal moire, press the or button. 6) When the horizontal moire is adjusted, press VERTICAL. to confirm. Press the button to highlight 7) To adjust the vertical moire, press to confirm. Then press or button to adjust. 8) When the vertical moire is
  • Philips 107T66 | User manual - Page 107
    The OSD Controls RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (24 of 24)2005-04-08 ¤W¤È 11:32:13
  • Philips 107T66 | User manual - Page 108
    , being 36 months as from the purchase date of your original monitor. What is excluded? The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt
  • Philips 107T66 | User manual - Page 109
    Reception problems caused by signal conditions or cable or antenna systems outside the unit; q Defects caused by abuse or misuse of the monitor; q of any problems, we advise you to read the operating instructions carefully or go to the www. philips.com/support website for additional support. Just a
  • Philips 107T66 | User manual - Page 110
    to which the faulty monitor has to be collected and the swap model should be delivered. Philips' customer help desks are located worldwide. Click here to access the F1rst Choice Contact Information. Or you can reach us via: Website: http://www.philips.com/support
  • Philips 107T66 | User manual - Page 111
    buy your monitor. For 3 years thereafter, your monitor will be serviced in case of defects provided for under the warranty coverage. What is excluded? The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon
  • Philips 107T66 | User manual - Page 112
    product can be used in a specific country. Just a click away In case of any problems, we advise you to read the operating instructions carefully or go to the www. philips.com/support website for additional support. Just a phone call away In order to avoid unnecessary inconvenience, we advise you to
  • Philips 107T66 | User manual - Page 113
    The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and In case your Philips product is not working correctly or is defective, please contact your Philips dealer. In the event you require service whilst in another
  • Philips 107T66 | User manual - Page 114
    International Guarantee Website: http://www.philips.com file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WAR_INTL.HTM (2 of 2)2005-04-08 ¤W¤È 11:32:18
  • Philips 107T66 | User manual - Page 115
    directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase. If you have any problems with your monitor within the second or third year of purchase
  • Philips 107T66 | User manual - Page 116
    distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not
  • Philips 107T66 | User manual - Page 117
    , because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) TO GET WARRANTY SERVICE IN CANADA... Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at
  • Philips 107T66 | User manual - Page 118
    Philips, please prepare the following details so we can solve your problem quickly. q Philips type number q Philips monitor has to be collected and the swap model should be delivered. Just a phone call away Philips' customer help desks are located worldwide. Within the U.S. you can contact Philips
  • Philips 107T66 | User manual - Page 119
    F1rst Choice Contact Information F1rst Choice Contact Information Country Austria Belgium Cyprus Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom Telephone number 01 546 575 603 070 253 010 800 92256 3525 8761 09
  • Philips 107T66 | User manual - Page 120
    of JV IBA M. Bogdanovich str. 155 BY - 220040 Minsk Tel: +375 17 217 33 86 BULGARIA LAN Service 140, Mimi Balkanska Str. Office center Translog 1540 Sofia, Bulgaria tel: +359 2 960 2360 www.lan-service.bg CZECH REPUBLIC Xpectrum Lužná 591/4 CZ - 160 00 Praha 6 Tel: 800 100 697 Email:info@xpectrum
  • Philips 107T66 | User manual - Page 121
    Consumer Information Centers CROATIA Renoprom d.o.o. Mlinska 5, Strmec HR - 41430 Samobor +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331
  • Philips 107T66 | User manual - Page 122
    ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel.:+40 21 2101969 SERBIA&MONTENEGRO Tehnicom Service d.o.o. Bulevar Vojvode Misica 37B YU - 11000 Belgrade Tel: +381 11 3060 886 SLOVAKIA Datalan Servisne Stredisko Puchovska 8 SK - 831 06 Bratislava
  • Philips 107T66 | User manual - Page 123
    33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com Latin America ANTILLES Philips Antillana N.V.Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3051 Willemstad, Curacao Phone: (09)-4612799 Fax : (09)-4612772 ARGENTINA Vedia 3892 Capital Federal
  • Philips 107T66 | User manual - Page 124
    0800-701-0203 - Other Regions without São Paulo City. CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02 )-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr. 104-33 Bogota
  • Philips 107T66 | User manual - Page 125
    66 66 Fax : (598)-619 77 77 Customer Desk: Phone: 0004054176 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Philips Electronics Ltd. 281 Hillmount Road Markham Ontario, L6C 2S3 Phone: 800- 479-6696 Fax:905-887
  • Philips 107T66 | User manual - Page 126
    Philips Consumer Electronics Customer Care Centre. Level 1, 65 Epping Rd North Ryde NSW 2113 Phone: 1300 363 391 Fax:+61 2 9947 0063 NEW ZEALAND Philips : 0800 477 999 (Toll Free) Fax:0800 288 588 Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215 Phone:
  • Philips 107T66 | User manual - Page 127
    Centers HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A, 10/F. Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T. Hong Kong Phone: (852) 2619-9663 Fax: (852) 2481 5847 INDIA Phone: (020)-712 2048 ext 2765 Fax:(020)-712 1558 BOMBAY Philips India Customer Relation
  • Philips 107T66 | User manual - Page 128
    Itaewon-Dong. Yongsan-Ku, Seoul 140-202 Phone: 080 600 6600 (Toll Free) Fax:(02)709 1245 MALAYSIA After Market Solutions Sdn Bhd, Philips Authorised Service Center, Lot 6, Jalan 225, Section 51A, 46100 Petaling Jaya, Selangor Darul Ehsan, Malaysia Phone: (603)-7954 9619/ 7956 3695 Fax:(03)-7954 8504
  • Philips 107T66 | User manual - Page 129
    &Lighting, Inc. Consumer Electronics 48F PBCOM Tower 6795 Ayala Avenue cor VA Rufino St. Salcedo Village 1227 Makati City, PHILS Phone: (02)-888 0572 , Domestic Toll Free:1-800-10-PHILIPS or 1-800-10-744 5477 Fax:(02)-888 0571 SINGAPORE Accord Customer Care Solutions Ltd Authorized Philips Service
  • Philips 107T66 | User manual - Page 130
    Consumer Information Centers THAILAND Philips Electronics Thailand Ltd. 26-28th floor, Thai Summit Tower 1768 New Petchburi Road Khwaeng Bangkapi, Khet Huaykhwang Bangkok 10320 Thailand Phone : (66) 2-652 8652 email:cic [email protected] Africa MOROCCO Philips Electronique Maroc 304,BD Mohamed V
  • Philips 107T66 | User manual - Page 131
    Consumer Information Centers file:///D|/EDFU/crt_17_6/edoc/english/WARRANTY/WARCIC.HTM (12 of 12)2005-04-08 ¤W¤È 11:32:32
  • Philips 107T66 | User manual - Page 132
    WARRANTY REGISTRATION CARD Registering your product is an essential step to ensure that you receive all of the benefits you are entitled to as a Philips customer. So complete the information below in ink, and drop this card in the nearest mailbox. IMPORTANT - RETURN WITHIN TEN DAYS Month Day Year
  • Philips 107T66 | User manual - Page 133
    PHILIPS Warranty Card 8/16/02 12:38 PM Page 2 !1375415338! PO BOX 1533 DEPOSIT NY 13754-1533 TIME-DATED MATERIAL Please Open Promptly! a PLEASE APPLY FIRST
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
electronic user's manual
file:///D|/EDFU/crt_17_6/edoc/english/107T/manual.html2005-04-08 ¤W¤È 11:31:40