Philips 24B1U5301H User manual

Philips 24B1U5301H Manual

Philips 24B1U5301H manual content summary:

  • Philips 24B1U5301H | User manual - Page 1
    Business Monitor 5000 Series 24B1U5301H EN User manual 1 Customer care and warranty 33 Troubleshooting and FAQs 37 Register your product and get support at www.philips.com/welcome
  • Philips 24B1U5301H | User manual - Page 2
    28 8.1 Resolution & Preset Modes 31 9. Power Management 32 10. Customer care and warranty ��� 33 10.1 Philips' Flat Panel Displays Pixel Defect Policy 33 10.2 Customer Care & Warranty 36 11. Troubleshooting & FAQs 37 11.1 Troubleshooting 37 11.2 General FAQs 38 11.3 Multiview FAQs 42
  • Philips 24B1U5301H | User manual - Page 3
    and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor. Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Service contact information listed in Important information manual
  • Philips 24B1U5301H | User manual - Page 4
    degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • Do not knock or drop the monitor during operation or transportation. • The USB Type-C port could only be connected to specify equipment with fire enclosure in compliance with
  • Philips 24B1U5301H | User manual - Page 5
    service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied
  • Philips 24B1U5301H | User manual - Page 6
    to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in
  • Philips 24B1U5301H | User manual - Page 7
    2. Setting up the monitor 2.1 Installation 1 Package contents Business Monitor 5000 Series 24B1U5301H Quick start Register your product and get support at www.philips.com/welcome 2 Install the base 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the
  • Philips 24B1U5301H | User manual - Page 8
    USB C driver. You can go to Philips website support page to download the "LAN Drivers". Please follow the steps for the installation: 1. Install the LAN driver that matches your system. 2. Double click driver to install, and follow Window's instructions
  • Philips 24B1U5301H | User manual - Page 9
    list. 6. We recommend to periodically visit the above web link to check for the availability of the most updated driver. Note Please contact Philips service hotline for Mac address clone tool as necessary. 5 USB hub To comply with International energy standards, the USB hub/ports of this monitor
  • Philips 24B1U5301H | User manual - Page 10
    2.2 Operating the monitor 1 Description of the control buttons 2 Webcam 5 12 34 1 3 76 5 4 2 1 1 Switch monitor's power ON or OFF. Access the OSD menu. 2 Confirm the OSD adjustment. 3 Adjust the OSD menu. User preference key. Customize your own 4 preference function from OSD
  • Philips 24B1U5301H | User manual - Page 11
    What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below
  • Philips 24B1U5301H | User manual - Page 12
    C input for this monitor is "High Data Speed". The maximum resolution supported depends on your graphic card capability. If your PC doesn't support HBR 3, select High Resolution in USB Setting, then the maximum resolution supported will be 1920 x 1080 @75Hz. Press button > USB Setting > USB > High
  • Philips 24B1U5301H | User manual - Page 13
    6 Physical Function Tilt 30° -5° Swivel -180° +180° Height adjustment Pivot 0° -90° 0° 90° Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the
  • Philips 24B1U5301H | User manual - Page 14
    faster than a password. 2 How to enable Windows Hello™ pop-up webcam Philips monitor with Windows Hello webcam can be enabled by simply connecting your USB cable . Refer to Windows official website for the settings: https://support.microsoft.com/ help/4028017/windows-learn-aboutwindows-hello-and-set
  • Philips 24B1U5301H | User manual - Page 15
    b. Click on sign-in options in the sidebar. c. You need to set up a PIN code before you're allowed to use Windows Hello. Once you've added this, the option for Hello will unlock. d. You'll now see which options are available to set up under Windows Hello. 4. If you connect the USB cable from "USB
  • Philips 24B1U5301H | User manual - Page 16
    two separate PCs with one monitor-keyboard-mouse set up. 2 How to enable MultiClient Integrated KVM With the built-in MultiClient Integrated KVM, Philips monitor allows to quickly switch your peripherals back and forth between in two devices through the OSD menu setting. Use USBC and HDMI or DP
  • Philips 24B1U5301H | User manual - Page 17
    2. Connect peripherals to the USB downstream port of this monitor. 1 1 PC1/PC2 USBC2 PC1 2 USB USBC1 PC2 3. Enter to OSD menu. Go to KVM layer and select "Auto", "USB C1" or "USB C2" to switch the control of peripherals from one device to another. Simply repeat this step for switching the
  • Philips 24B1U5301H | User manual - Page 18
    PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze. 2 Why do I need it? With the ultra high resolution Philips MultiView display, you can experience a world of connectivity in a comfortable way in the office or at home. With this display, you can conveniently
  • Philips 24B1U5301H | User manual - Page 19
    , you will able to see 2 devices source screen project to this display side by side without black strips. Note the analog signal is not support this full screen in PBP mode. • PIP / PBP Input: There are three different video input to choose as the sub display source: [HDMI 1.4], [DisplayPort
  • Philips 24B1U5301H | User manual - Page 20
    2.7 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.
  • Philips 24B1U5301H | User manual - Page 21
    and sharpness in real time to enhance your display viewing experience. How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the contrast, color saturation
  • Philips 24B1U5301H | User manual - Page 22
    rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage. Note
  • Philips 24B1U5301H | User manual - Page 23
    3.3 LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions.
  • Philips 24B1U5301H | User manual - Page 24
    monitor. 1 What is it? Smart Power is an exclusive Philips technology that provides flexible power delivery options for various devices. This the brightness value of the monitor. You may adjust the brightness value manually to increase power delivery from this monitor. There are 3 power delivery
  • Philips 24B1U5301H | User manual - Page 25
    Stream feature enables multiple monitor connections. This Philips display is equipped with DisplayPort interface and Setting to USB 3.2, press button, select USB Settings > USB, then select USB 3.2 which supports the LAN speed to 1G. 3. Depends on the graphic card capability, you may connect maximum
  • Philips 24B1U5301H | User manual - Page 26
    Note The secondary monitor in the chain must support DisplayPort multi-streaming, and the maximum resolution support is 1920 x 1080@60Hz. 24
  • Philips 24B1U5301H | User manual - Page 27
    monitor is designed to prevent eye strain caused by prolonged computer use. Follow below instructions and use Philips monitor to efficiently reduce fatigue and maximum working productivity. 1. Appropriate environment lighting: • Adjusting the environment lighting similar to that of your screen
  • Philips 24B1U5301H | User manual - Page 28
    for example, when the user leaves his seat and is no longer in front of the monitor, the monitor automatically reduces the power consumption upto 75%. User present in front User not present from the monitor use the maximum detection signal for distances up to 120 cm or 47 inches. (Setting
  • Philips 24B1U5301H | User manual - Page 29
    mode (90 degree/vertical position); it will automatically turn ON if monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is
  • Philips 24B1U5301H | User manual - Page 30
    Sync input IPS Technology W-LED 23.8" W (60.5 cm) 16:9 0.2745 (H) x 0.2745 (V) 1000:1 1920 x 1080 @ 60 Hz 1920 x 1080 @ 75 Hz 178° (H) / 178° (V) @ C/R > 10 (Typ.) SmartImage 16.7M (8 bits) 48 - 75 Hz 30 - 85 KHz YES YES YES YES HDMI, DisplayPort, USBC1 (DP Alt mode) 1 x HDMI 1.4 (HDCP 1.4, HDCP
  • Philips 24B1U5301H | User manual - Page 31
    Convenience USER convenience Built-in speaker Built-in Webcam MultiView OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt Swivel Height adjustment Pivot Power Consumption Normal Operation Sleep (Standby mode) Off mode Off mode(AC switch) Heat Dissipation* Normal Operation Sleep (
  • Philips 24B1U5301H | User manual - Page 32
    , and power delivery 90W. 3 The USB-C port USBC2 provides upstream data transfer only. Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. Power delivery function will base on laptop's capability. 30
  • Philips 24B1U5301H | User manual - Page 33
    00 83.93 960 x 1080 PBP mode 75.00 48.36 1024 x 768 60.00 56.48 1024 x 768 70.07 60.02 1024 x 768 75.03 44.77 1280 x 720 59.86 60.00 1280 x 960 60.00 1920 x 1080 @ 60Hz from your PC. 2. The factory default setting HDMI supports to the resolution 1920 x 1080 @ 60Hz. 3. The USB hub default
  • Philips 24B1U5301H | User manual - Page 34
    9. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically. The
  • Philips 24B1U5301H | User manual - Page 35
    Display panel must exceed these acceptable levels. For example, no more than 0.0004% of the sub pixels on a display may be defective. Furthermore, Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid
  • Philips 24B1U5301H | User manual - Page 36
    . Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects
  • Philips 24B1U5301H | User manual - Page 37
    BRIGHT DOT DEFECTS 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot
  • Philips 24B1U5301H | User manual - Page 38
    www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package
  • Philips 24B1U5301H | User manual - Page 39
    Visible signs of smoke or sparks • Do not perform any troubleshooting steps • Disconnect the display from mains power source immediately for safety • Contact with Philips customer service representative immediately. Imaging Problems Image appears blurred, indistinct or too dark • Adjust the contrast
  • Philips 24B1U5301H | User manual - Page 40
    , refer to the Service contact information listed in Important information manual and contact Philips customer service representative. * Functionality 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance. Q3: Ans.: What are the .inf
  • Philips 24B1U5301H | User manual - Page 41
    .icm files) when you first install your monitor. Follow the instructions in your user manual, monitor drivers (.inf and .icm files) will be installed to any PC, workstation or Mac? Ans.: Yes. All Philips LCD displays are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter
  • Philips 24B1U5301H | User manual - Page 42
    Q14: Ans.: Where can I find Important Information manual mentioned in EDFU? Important Information manual can be download on the Philips website support page." Q15: Ans: Why cannot detect my monitor Crtl + Shift + ESC to launch the Microsoft Windows Task Manager. 2. Select 'Services' tag. 40
  • Philips 24B1U5301H | User manual - Page 43
    ). If the status shows 'Running', right click to stop the service first, then restart the service manually. 4. Then go back to sign-in options menu to set up Window Hello Webcam. Q16: Ans: Why I cannot automatically switch to the connected input source
  • Philips 24B1U5301H | User manual - Page 44
    11.3 Multiview FAQs Q1: Can I enlarge the PIP sub window? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can press to enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu. Q2: How to listen to Audio, independent of video? Ans.:
  • Philips 24B1U5301H | User manual - Page 45
    Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice. Version: M1124BU5301E1WWT
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

Business
Monitor
5000
Series
Register your product and get support at www.philips.com/welcome
EN
User manual
1
Customer care and warranty
33
Troubleshooting and FAQs
37
24B1U5301H