Philips TAFW1 User manual
Philips TAFW1 Manual
 |
View all Philips TAFW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Philips TAFW1 manual content summary:
- Philips TAFW1 | User manual - Page 1
Fidelio Wireless Suubbwoofer FW1 User manual Register your product and get support at www.philips.com/support - Philips TAFW1 | User manual - Page 2
instructions 3 Safety 3 Care for your product 4 Care of the environment 4 Declaration of conformity 4 Help and support 5 FCC information 6 2 Your Subwoofer 7 What's in the box 7 Subwoofer 8 3 Connect 9 Connect to power 9 Manual specifications 16 5 Troubleshooting 17 2 EN - Philips TAFW1 | User manual - Page 3
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This is CLASS II apparatus with double insulation, and no protective earth provided. AC voltage Follow the instructions in the user manual! WARNING! Warning: Risk of electric shock! The - Philips TAFW1 | User manual - Page 4
RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can find the Declaration of Conformity on www.philips.com/support. - Philips TAFW1 | User manual - Page 5
www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website - Philips TAFW1 | User manual - Page 6
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Philips TAFW1 | User manual - Page 7
support that Philips offers, register your subwoofer at www.philips.com/support. Headphones Series CTN Headphones Series CTN Headphones Series CTN Quick Start Guide Sheet x1 • Images, illustrations and drawings shown on this User Manual are for reference only, actual product may vary in appearance. - Philips TAFW1 | User manual - Page 8
module can be turned off. • To upgrade firmware for Play-fi module and MCU via USB service port, source switch must be at Sub in position. 4 USB service socket The USB socket is for service only. 5 Reset button (Pin hole) Reset device to default setting. 6 Phase 0° - 180° (switch) 7 Sub in (socket - Philips TAFW1 | User manual - Page 9
Subwoofer Output out Fidelio FW1 Sub in BC D Preamp Subwoofer Output out Connect to power Fidelio FW1 Fidelio FW1 A B Connection Go to page A Manual pairing with FB1 soundbar / 10 Initial set up to RF link B Connect to Wi-Fi 11 (Wireless Operation) C Connect the subwoofer to 14 - Philips TAFW1 | User manual - Page 10
1 2 Manual pairing with FB1 soundbar / Initial set up to RF link 4 On FB1 soundbar remote control, enter setting menu: » Press > select "SUB PAIR" > Then press (Enter) - Philips TAFW1 | User manual - Page 11
to the same Wi-Fi network that you want to connect your subwoofer. 5 Launch the Philips Sound app powered by DTS Play-fi. Follow the instructions in the app to connect this product to your Wi-Fi network. Wi-Fi 1 - Philips TAFW1 | User manual - Page 12
again. Press hold down the (Wi-Fi) button on 3 the subwoofer for 8 seconds to reset the Wi-Fi connection. WPS 3 4 Double blink WPS 3 Follow the instruction in Philips Sound app powered by DTS Play-fi to start the pairing. Philips Sound 4 DevicSeest Up Play-Fi Device 12 EN - Philips TAFW1 | User manual - Page 13
Note •• WPS is not a standard feature on all routers. If your router does not have WPS then use Standard Wi-Fi Setup. •• Press the (Wi-Fi) button once if you want to exit the WPS mode or it will automatically exit after 2 minutes. Connect the subwoofer with Philips Sound app 1 After successful Wi- - Philips TAFW1 | User manual - Page 14
Connect the subwoofer to Philips Play-fi enabled TV 1 Power up your DTS Play-fi TV connected to the internet. » TV sound is muted. 2 Enter the Settings menu on TV. » Settings > Sound > DTS Play-fi 1 TV Surround sound Setup Follow the on-screen setup. 1 SoTuhnisdTbVar 2 Speakers 2 Solid Settings - Philips TAFW1 | User manual - Page 15
Note •• When FW1 as Play-fi subwoofer, above controls and functions are not applicable. Upgrade firmware To get the best features and support, update your product with the latest firmware version. Update firmware via Philips Sound (Settings > Fine Tune / Update Firmware) The firmware for MCU - Philips TAFW1 | User manual - Page 16
and design are subject to change without notice. Wireless 5.8G Wireless frequency range / Transmitter power (EIRP) 5742 ~ 5852 MHz ≤ 10dBm Network supported WiFi IEEE 802.11a/b/g/n/ac Wireless frequency band (Wi-Fi) /Radio frequency power transmitted (EIRP) 2.4G Wi-Fi 2400 ~ 2483.5 MHz - Philips TAFW1 | User manual - Page 17
5 Troubleshooting WARNING! •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support - Philips TAFW1 | User manual - Page 18
Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
User manual
Register your product and get support at
www.philips.com/support
Fidelio
Wireless Subwoofer FW1