Pioneer FH-X700BT Owner's Manual - Page 19

Additional information Additional information Appendix English Common Message Cause Action AMP ERROR Unit fails to op- Check the speak- erate or speaker er connection. If connection is the message fails incorrect; pro- to disappear even tective circuit is after the engine is activated. switched off/on, contact your deal- er or an author- ized Pioneer Service Station for assistance. CD player Message Cause Action ERROR-07, The disc is dirty. Clean the disc. 11, 12, 17, 30 The disc is Replace the disc. scratched. ERROR-07, 10, 11, 12, 15, 17, 30, A0 There is an elec- Turn the ignition trical or me- switch OFF and chanical error. back ON, or switch to a differ- ent source, then back to the CD player. ERROR-15 The inserted disc is blank. Replace the disc. ERROR-23 Unsupported CD format. Replace the disc. FORMAT READ Sometimes Wait until the there is a delay message disap- between the pears and you start of playback hear sound. and when you start to hear any sound. Message NO AUDIO SKIPPED PROTECT Cause Action The inserted disc does not contain any playable files. Replace the disc. The inserted disc contains DRM protected files. Replace the disc. All the files on the inserted disc are embedded with DRM. Replace the disc. USB storage device/iPod Message Cause Action FORMAT READ NO AUDIO SKIPPED Sometimes Wait until the there is a delay message disap- between the pears and you start of playback hear sound. and when you start to hear any sound. There are no songs. Transfer the audio files to the USB storage device and connect. The connected Follow the USB USB storage de- storage device in- vice has secur- structions to dis- ity enabled. able the security. The connected Play an audio file USB storage de- not embedded vice contains with Windows files embedded Media DRM 9/10. with Windows Mediaä DRM 9/ 10. Message PROTECT N/A USB CHECK USB CHECK USB Cause Action All the files in Transfer audio the USB storage files not em- device are em- bedded with bedded with Windows Media Windows Media DRM 9/10 to the DRM 9/10. USB storage de- vice and connect. The USB device connected to is not supported by this unit. ! Connect a USB Mass Storage Class compliant device. ! Disconnect your device and replace it with a compatible USB storage device. The USB connector or USB cable has shortcircuited. Check that the USB connector or USB cable is not caught in something or damaged. The connected Disconnect the USB storage de- USB storage de- vice consumes vice and do not more than maxi- use it. Turn the mum allowable ignition switch to current. OFF, then to ACC or ON and then connect only compliant USB storage devices. Message CHECK USB ERROR-19 ERROR-23 Cause Action The iPod operates correctly but does not charge. Make sure the connection cable for the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back ON, or disconnect the iPod and reconnect. Communication Perform one of failed. the following op- erations. -Turn the ignition switch OFF and back ON. -Disconnect the USB storage de- vice. -Change to a dif- ferent source. Then, return to the USB source. iPod failure. Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. USB storage de- USB storage de- vice was not for- vice should be for- matted with matted with FAT12, FAT16 or FAT12, FAT16 or FAT32. FAT32. En 19