Home » Poulan Manuals » Lawn & Garden » Poulan ES350 » Manual Viewer

Poulan ES350 User Manual

Poulan ES350 Manual

Get Poulan ES350 PDF manuals and user guides

View all Poulan ES350 manuals

Add to My Manuals
Save this manual to your list of manuals

Poulan ES350 manual content summary:

Poulan ES350 | User Manual - Page 1
. Veuillez ne pas retourner l'outil au détaillant. 1-800-554-6723 www.poulan.com Instruction Manual Manual de Instrucciones Manuel d'Instructions ES350 ES350WT ESPAÑOL WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in
Poulan ES350 | User Manual - Page 2
to reduce the risk of fire, electric shock, and serious injury. Read and follow all instructions. WARNING: Always disconnect power source when making repairs, adjustments, and when changing accessories and attachments such as saw bar, chain or guards. Because a chain saw is a high-speed woodcutting
Poulan ES350 | User Manual - Page 3
conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service dealer unless otherwise indicated elsewhere in the instruction manual. S When not in use, chain saws should be stored in a dry, high or locked-up place
Poulan ES350 | User Manual - Page 4
a branch, do not let the guide bar contact another branch or other objects around it. S Keep saw chain sharp and properly tensioned. A loose or dull chain can increase the chance of kickback. Follow manufacturer's chain sharpening and maintenance instructions. Check tension at regular intervals, but
Poulan ES350 | User Manual - Page 5
associated without a chain brake. When purchasing replacements, considerations should saw. The following guide bar and chain combinations meet kickback requirements of CSA Z62.1 & Z62.3 and ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed
Poulan ES350 | User Manual - Page 6
Kickback Occupational Health and Safety" CSA Z62.1 "Chain Saws -- Occupational Health and Safety" SAVE THESE INSTRUCTIONS ASSEMBLY WARNING: Before using chain saw, ensure all fasteners are secure. NOTE: If you need assistance or find that parts are missing or damaged, please call 1-800-554-6723
Poulan ES350 | User Manual - Page 7
OPERATION KNOW YOUR SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future refer- ence. Bar Oil Cap Hand Guard
Poulan ES350 | User Manual - Page 8
of the bar. For maximum guide bar and chain life, we recommend you use Poulan chain saw bar oil. If Poulan bar oil is not available, you may use a good grade SAE 30 oil until you are able to obtain Poulan brand. Use a funnel to fill the tank. Replace oil cap securely. Check oil level after every 15
Poulan ES350 | User Manual - Page 9
path Direction of Fall 45_ FELLING LARGE TREES (6 inches in diameter or larger) The notch method is saw to remove buttress roots, keep saw chain from contacting ground to prevent dulling of the chain. that may be poorly supported. When a tree doesn't fall completely, set saw aside and pull down
Poulan ES350 | User Manual - Page 10
side to prevent the saw from pinching. See illustration above for cutting logs with a compression side. BUCKING USING A LOG OR SUPPORT STAND S Remember your . Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing
Poulan ES350 | User Manual - Page 11
or bystanders. CHECK FOR DAMAGED OR WORN PARTS Contact an authorized service dealer for replacement of worn or damaged parts. NOTE: It is normal for a small amount of oil to appear under the saw after motor stops. Do not confuse this with a leaking oil tank. S Trigger Switch -- Ensure the trigger
Poulan ES350 | User Manual - Page 12
Correct Groove Replace the guide bar when the groove is worn, the guide bar is bent or crack--ed, or when excess heating or burring of the rails occurs. If replacement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw. 12
Poulan ES350 | User Manual - Page 13
replacement chain specified in the list of available replacement parts. The chain must comply with kickback requirements of ANSI B175.1 when tested with this saw. See your authorized service dealer to replace and sharpen individual cutters on your chain. TO REPLACE CHAIN: 1. Disconnect the chain saw
Poulan ES350 | User Manual - Page 14
CUSTOMER SERVICEABLE PARTS WARNING: Use of any other ac- cessory or attachment might present a risk of injury to the operator. REPLACEMENT PART PART NO. Hex Nuts Oil Cap Bar Adjusting Screw Bar Adjusting Pin File (5/32″ dia.) Twin Pak Xtra GUARDr Chain --16″ Lo--Kickr Guide Bar -- 16″ Bar & Chain
Poulan ES350 | User Manual - Page 15
burred or bent; rails uneven. 1. See "Chain Sharpening" in Service and Adjustments section. 2. Repair or replace guide bar. Oil inadequate for bar and chain lubrication. Chain cuts at an angle. 1. Oil tank empty. 2. Oil outlet clogged. 3. Guide bar oil hole blocked. 1. Cutters damaged on one side
Poulan ES350 | User Manual - Page 16
warranty does not cover parts that will wear and require re- placement with reasonable use during the warranty period. This warranty does not cover pre--delivery setup or normal adjustments explained in the instruction manual. 1--800--554--6723 In Canada, contact: Poulan 850 Matheson Blvd. West