Pyle GDV288SL Instruction Manual
Pyle GDV288SL Manual
 |
View all Pyle GDV288SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle GDV288SL manual content summary:
- Pyle GDV288SL | Instruction Manual - Page 1
- Pyle GDV288SL | Instruction Manual - Page 2
Appearance and Buttons 1. Shutter Button 2. Power Button 3. LCD Display 4. Micro USB Port 5. Mini HDMI Port 6. Micro SD Card Slot 7. Reset Button 8. Wi-Fi Switch 9. Wi-Fi Status Indicator 10. Lens 11. Charging Indicator 12. Mode Selector Switch 13. Microphone Gear Pro Activ - Pyle GDV288SL | Instruction Manual - Page 3
LCD Display Illustration Turn on the camera, the LCD will display the following: 1. Camera mode 2. Video recording mode 3. Vehicle-mounted mode 4. SD card icon (display when loaded) 5. Resolution icons: ™ In camera mode: HI stands for 8 Mega Pixels (3264x2448), LO stands for 5 Mega Pixels (2592x1944 - Pyle GDV288SL | Instruction Manual - Page 4
Working Mode Flow Chart After powering on the camera, you can adjust settings by pressing the Power Button and sliding the Mode Selector Switch on the side. Power button Mode switch Video preview mode (1080P 30fps) Mode switch Video mode (720P,30fps) Camera mode (8MP) Power button Power button - Pyle GDV288SL | Instruction Manual - Page 5
Default Settings and Display Video recording Gear Pro is in video recording mode. mode icon HI Video resolution FHD: 1080p @ 30fps Recording time Time display stands for 00 minutes then 00 seconds SD card icon Displayed when SD card is inserted, otherwise no display Battery level Battery is - Pyle GDV288SL | Instruction Manual - Page 6
Recording Modes Video recording mode To record a video, please check whether the Gear Pro is in Video mode. (the icon is played on the screen) Start recording: Press and release the button, the icon will appear on the LCD display. Stop recording: Press and release the button, the blue indicator will - Pyle GDV288SL | Instruction Manual - Page 7
Vehicle-mounted mode Please check whether the Gear Pro is in Vehicle-mounted mode. (the icon is played on the screen) Start recording: Press and release the button, the icon and will appear on the LCD display. Stop recording: Press and release the button, and the blue indicator will stop - Pyle GDV288SL | Instruction Manual - Page 8
Charging The Gear Pro comes with built-in rechargeable lithium battery. When the Gear Pro is off, connect it to your Mac or PC via USB cable to charge the battery. During charging, the battery indicator light will blink on. Note: When the Gear Pro is on, connecting it to your computer will not - Pyle GDV288SL | Instruction Manual - Page 9
Wi-Fi Connection Enable/disable Wi-Fi The Wi-Fi is disabled by default. Press the Wi-Fi button on the front of the camera to enable it. The orange indicator will blink and the Wi-Fi icon will display on LCD screen. After a few seconds, the Wi-Fi button will remain orange, signaling ready for use - Pyle GDV288SL | Instruction Manual - Page 10
The 'Gear Pro Activ' Downloadable Application Supports Android and iOS Download and Install Search for "Gear Pro Activ" in the Google Play or Apple App Store Once installed, find the app icon - Pyle GDV288SL | Instruction Manual - Page 11
'Gear Pro Activ' Application Interface (iOS) 1. battery icon 2. Video resolution 3. White balance 4. Setup (enter setup menu) 5. Enter Playback mode 6. Shutter button 7. Photo mode 8. Video mode The 'Gear Pro Activ' App allows you to take control of the camera right from your device. You'll be able - Pyle GDV288SL | Instruction Manual - Page 12
HDTV - HDMI Connection Connect the Gear Pro to an HDTV via HDMI cable (not included). If you need to transfer the image and audio to an HDTV for playback, insert the Com end of the HDMI cable to the Gear Pro, and the other end (output) to the HD input of the HDTV, as shown in the following figure: - Pyle GDV288SL | Instruction Manual - Page 13
HDTV - HDMI Connection When your HDTV is connected, the Gear Pro enters Playback mode, the Gear Pro's LCD is displayed as below: 1 2 3 S/N Icon name 1 Playback mode 2 File number 3 Video icon Description Indication of playback mode There are 31 files and you are viewing the 19th one The file is - Pyle GDV288SL | Instruction Manual - Page 14
Connecting to PC Turn on the Gear Pro and connect it to the USB port of your computer. The Gear Pro will enter U-disk mode and the LCD will display: This is also known as Preview Mode. Now you can view the photos or videos taken by DV on PC. While in this Preview Mode (PCO mode), press the Shutter
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
