Home » Pyle Manuals » Tools » Pyle PHMD3 » Manual Viewer

Pyle PHMD3 Instruction Manual

Pyle PHMD3 Manual

View all Pyle PHMD3 manuals

Add to My Manuals
Save this manual to your list of manuals

Pyle PHMD3 manual content summary:

Pyle PHMD3 | Instruction Manual - Page 1
Treasure Hunter Gold All Purpose Discriminating Metal Detector PHMD3 www.pyleaudio.com Instruction Manual The Pyle Treasure Hunter Gold is the classic all purpose metal detector. It has classic functions combined with high sensitivity and strong discrimination ability. It is suitable for all
Pyle PHMD3 | Instruction Manual - Page 2
Batteries Panel and Controller Quick-Start Field Operation Caution Trouble Shooting Guide CONTENTS Specification:  Operation Modes: Motion Mode: ALL METAL,DISC and TONE No-motion Mode: PINPOINT  MODE Switch: ALL METAL,DISC and TONE  Adjusting Sensitivity  Adjusting Discrimination  Adjusting
Pyle PHMD3 | Instruction Manual - Page 3
fig.2) Fig2 2. Attach the control console with two nuts on the bottom of detector arm. Align the control box's two holes with two holes of the bend lower right socket of the control box.(See fig.4) Fig4 4. The arm support corbel has two positions. The initial corbel location is the longer position.
Pyle PHMD3 | Instruction Manual - Page 4
with battery port (the UP-side is facing up), then replace the cover. 6 alkaline batteries will operate for about 40 hours. If you don't use detector for a week or more, please remove the batteries from the battery box.
Pyle PHMD3 | Instruction Manual - Page 5
won't discriminate objects any more. At this time, as long as the search coil approaches the metals slowly, the detector will respond. The closer the distance is, the louder the sound will be. It may help to pinpoint the target position.  Earphone Jack: When the
Pyle PHMD3 | Instruction Manual - Page 6
cent zinc coin(after 82 version) a 25 cent silver coin 2. Lay the metal detector properly  In order to avoid the outside metal interference to the detector, be sure to lay the metal detector properly.  Place the detector on a wooden or plastic table. Let the search coil extend over the table edge
Pyle PHMD3 | Instruction Manual - Page 7
pointer will swing to the right for one time.(Fig.11) Figure.11  Note: You have to move the metal objects, as the metal detector is in the motion mode. If you don't move the metals, the detector will not respond.  When rotate the SENS knob from "0" to "10",and change the height of the
Pyle PHMD3 | Instruction Manual - Page 8
iron  Set the DISC/TONE knob to "0",the unit will respond to any metal objects with a "DI" tone, and the pointer will swing for one time. the speaker will be silent and the pointer won't swing).While sweeping other metal samples, such as 5¢, pull tab,1¢,25¢,the unit will respond(the speaker
Pyle PHMD3 | Instruction Manual - Page 9
25¢,the unit will respond.(the speaker will sound a tone, and the pointer will swing to right)  It means that 1¢ is eliminated. d. To different metals, the location of the DISC knob is different. When rotating the knob from 0 to10, Iron, Nickel, Pull tab, Zinc, Copper and Aluminum will be rejected
Pyle PHMD3 | Instruction Manual - Page 10
similar method, and rotating the DISC/TONE knob, discriminate the metals with TONE.  The difference between TONE mode and DISC mode is that when the metal is rejected, the unit will not respond in "DISC" mode, while in TONE mode,t he detector will respond with a short "KO" "KO" tone. 7. Learn to
Pyle PHMD3 | Instruction Manual - Page 11
the experience to master the skill of detect gradually, and you will taste the joy of treasure-hunting. Field Operation Metal detector is used outdoors. There is too much metal interferance indoors, and also all kinds of electrical equipment that will cause interfering signals, so it's not fit for
Pyle PHMD3 | Instruction Manual - Page 12
a long "DI" tone, and the pointer will swing for one time. When the MODE switch is in the "TONE" position, the detector also has the ability of discriminating metals. Different from the "DISC" mode, to the rejected metals, the unit will respond with a short "Ko" "Ko" tone. While to the accepted
Pyle PHMD3 | Instruction Manual - Page 13
and low above the ground.( Figure.20,21) Figure.21 Most valuable metal objects could send repeatable signals. If the signal can't be repeated, it targets, you can make use of the "DISC" button to determine the metal type approximately. Please note such judgment isn't accurate, just as a reference.
Pyle PHMD3 | Instruction Manual - Page 14
mode directly. Please note when pressing the TARGET button, the DISC/TONE and SENS knob are no longer functional. And the detector will respond to all kinds of metals. Caution  In areas with heavy traffic, please don't wear earphone, in case an accident occurs.  Always obtain permission before
Pyle PHMD3 | Instruction Manual - Page 15