Pyle PLCM4378WIR Instruction Manual
Pyle PLCM4378WIR Manual
 |
View all Pyle PLCM4378WIR manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PLCM4378WIR manual content summary:
- Pyle PLCM4378WIR | Instruction Manual - Page 1
- Pyle PLCM4378WIR | Instruction Manual - Page 2
to use the product as outlined in this user manual. Altercation or modi cations carried out without appropriate authorization may invalidate the user's right to operate the equipment. WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including damaged - Pyle PLCM4378WIR | Instruction Manual - Page 3
: Camera System installation on diesel vehicles may require a slightly di erent wiring install. These installation instructions do not apply to all types of vehicles. They are meant only as a general guide due to the large number of vehicle makes and models. Consult your local motor vehicle laws on - Pyle PLCM4378WIR | Instruction Manual - Page 4
Installation Transcript: 1. Locate the reverse taillight wiring behind your vehicle's reverse light. You may need to remove an interior panel, or other cover, in order to locate the wiring. Connect a wireless module to the reverse light. 2. Connect the camera to the wireless module, then mount the - Pyle PLCM4378WIR | Instruction Manual - Page 5
: you can connect to a wired camera input in case the supplied wireless camera does not work. DC POWER V1 / V2 MENU Monitor R PLCM4378WIR Cigarette plug Camera Camera Input DC DC +12v 12v Taillight R Wireless Video Transmitter Video Transmitter Remarks: After wiring up, please seal this - Pyle PLCM4378WIR | Instruction Manual - Page 6
Backup Camera Systems Angle Adjustable Camera Lens Located on the camera housing are 2 screws which lock the camera lens angle in position. The screws may be loosened to allow camera lens angle adjustment Loosen the screws, adjust the camera lens into the desired angle. then tighten the screws
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
