Pyle PLMRA402 Instruction Manual

Pyle PLMRA402 Manual

Get Pyle PLMRA402 PDF manuals and user guides View all Pyle PLMRA402 manuals
Add to My Manuals
Save this manual to your list of manuals

Pyle PLMRA402 manual content summary:

  • Pyle PLMRA402 | Instruction Manual - Page 1
    PLMRA402 Elite Series Waterproof Amplifier 400 Watt 4-Channel Amp System, Dual MOSFET Power Supply
  • Pyle PLMRA402 | Instruction Manual - Page 2
    before using the product to ensure its correct use. Keep this manual for future reference. INTRODUCTION The PLMRA402 has been designed using the latest electronic technology available. The PLMRA402 is with engineered features allowing you to produce
  • Pyle PLMRA402 | Instruction Manual - Page 3
    FUNCTIONS 1. POWER ON LED: Lights up when the remote on system is energized. 2. INPUT GAIN CONTROL: Adjust high impedance input gain from 1 V to 300mV for best matching with PREAMP output for your car stereo. 3. LOW IMPEDANCE INPUT (HIGH LEVEL INPUT): This unit is provided with two terminal inputs (
  • Pyle PLMRA402 | Instruction Manual - Page 4
    ELECTRICAL AND AUDIO CONNECTIONS A. STEREO INPUT CONNECTION 1. High impedance input TO RIGHT REAR INPUT TO LEFT REAR INPUT TO LEFT FRONT INPUT TO RIGHT FRONT INPUT TO RIGHT FRONT INPUT TO RIGHT REAR INPUT TO LEFT FRONT INPUT TO LEFT REAR INPUT FROM LEFT FRONT PREAMP OUTPUT OF CAR STEREO FROM RIGHT
  • Pyle PLMRA402 | Instruction Manual - Page 5
    a-2. Common Ground Type b. Two Speaker Output Mode b-1. Floating Ground Type CAR STEREO FIG 3A LR + COMMON RR + LF + COMMON RF + LEFT + LEFT RIGHT RIGHT + CAR STEREO FIG 4 www.PyleUSA.com 5
  • Pyle PLMRA402 | Instruction Manual - Page 6
    LEFT COMMON RIGHT b-2. Common Ground Type CAR STEREO FIG 4A NOTE: High and low impedance input cannot be used at same time. B. SPEAKER CONNECTION Connect the speaker output terminals to the corresponding speakers. (Figure 5) The speakers must be high quality and capable of handling high power.
  • Pyle PLMRA402 | Instruction Manual - Page 7
    of power supply directly to the (-) negative ground battery terminal or car chassis. 3. To make a good grounding and prevent motor boating noise problem connect another 12 gauge minimum wire from the (-) negative battery terminal to chassis of stereo unit. 4. Connect the 'Remote' pole to external
  • Pyle PLMRA402 | Instruction Manual - Page 8
    INSTALLATION This ampli er comes complete with mounting hardware, if the unit is used in the line level (high impedance) mode, it is recommended to use gold plated RCA connection cables with the length as short as possible and mount the unit as close as possible to the receiver. This will lower the
  • Pyle PLMRA402 | Instruction Manual - Page 9
    MAINTENANCE Your PYLE power Ampli er is an example of superior design and craftsmanship. The lowing suggestions will help you care for your ampli er so you can enjoy it for years. Keep the ampli er dry. If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode electronic
  • Pyle PLMRA402 | Instruction Manual - Page 10
    TESTING 1. After all the connections have been made, turn ON your stereo and listen for the ampli er to turn ON. If there are any unusual noises from the speakers then turn the system o and recheck all the wiring. 2. After you have connected your radio or equalizer to the ampli er, you may adjust
  • Pyle PLMRA402 | Instruction Manual - Page 11
    Features: • 4-Channel Amp System • Dual MOSFET Power Supply • Marine Grade Construction • Waterproof Marine Rating IP-01 • Dual Adjustable Input GAIN Level Controls • Dual High-Level Speaker Input Connectors • Dual RCA (L/R) Input Connector Jacks • Gold-Plated Speaker Output Terminal Connectors •
  • Pyle PLMRA402 | Instruction Manual - Page 12
    Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: [email protected]
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Elite Series Waterproof Amplifier
PLMRA402
400 Watt 4-Channel Amp System,
Dual MOSFET Power Supply