Home » Pyle Manuals » Car Video Devices » Pyle PLMRDK18B » Manual Viewer

Pyle PLMRDK18B Instruction Manual

Pyle PLMRDK18B Manual

View all Pyle PLMRDK18B manuals

Add to My Manuals
Save this manual to your list of manuals

Pyle PLMRDK18B manual content summary:

Pyle PLMRDK18B | Instruction Manual - Page 1
• PLL Synthesizer Stereo Radio • Automatic Memory Storing • Preset Equalization • USB/ SD Interface • 3.5mm Jack input • Bluetooth PLMRDK18B - PLMRDK19BKT Mobile Audio System
Pyle PLMRDK18B | Instruction Manual - Page 2
SELECTING DIRECTORY UP/DOWN 9 • PAUSING PLAYING ...9 • PREVIEWING ALL TRACKS 9 • REPEATING THE SAME TRACK 9 • PLAYING ALL TRACKS IN RANDOM 9 SD OPERATION ...9 BLUETOOTH OPERATION 10 SPECIFICATION ...11 TROUBLESHOOTING ...12 2 www.PyleUSA.com
Pyle PLMRDK18B | Instruction Manual - Page 3
INSTALLATION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected with the unit and works properly. • Use only the parts included
Pyle PLMRDK18B | Instruction Manual - Page 4
4. Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables. 5. Slide the unit into the sleeve until it locks into place. 6. To further secure the unit, use the supplied metal strap to secure the back of the unit in place. Use the supplied hardware (Hex Nut (M5mm)
Pyle PLMRDK18B | Instruction Manual - Page 5
ISO CONNECTION WIRING CONNECTION 5 www.PyleUSA.com
Pyle PLMRDK18B | Instruction Manual - Page 6
LOCATION OF KEYS OPERATION 1. POWER/MODE/ 2. PUSH/SEL 3. AS/PS/ 4. LCD 5. 0/DISP 6. 9/ (SEEK UP) button 7. SD interface 8. USB interface 9. AUX IN 10. 8/ (SEEK DOWN) button 11. 7/BAND 12. 6DIR+ 13. 5 DIR14. 4RDM 15. 3 RPT 16. 2 INT 17. 1PAU 18. Reset function 19. Microphone 6 www.PyleUSA.com
Pyle PLMRDK18B | Instruction Manual - Page 7
OPERATION SWITCHING ON/OFF THE UNIT Press PWR button (1) to turn on the unit. When the unit is on. Press and hold for 2 seconds to turn oﬀ the unit. SOUND ADJUSTMENT Press SEL button (2) shortly to select the desired adjustment mode. The adjustment mode will be changed in the following order: BAS-
Pyle PLMRDK18B | Instruction Manual - Page 8
or 8/ button (10) shortly to activate automatic seek function. It will search up/down a station automatically. Press for 2 seconds until "MANUAL" appears on the display, the manual tuning mode is selected. In this mode you can turn up / down a step frequency one by one till searched a station. If
Pyle PLMRDK18B | Instruction Manual - Page 9
files automatically. If in other mode, you can also press MODE button (1) to select USB mode. It supports the MP3/WMA file in the device. For the operation please refer to the following instruction. SELECTING SONGS IN SINGLE STEP Press button (6) or button(10) to move to the following song or the
Pyle PLMRDK18B | Instruction Manual - Page 10
OPERATION I. When use Bluetooth, please make sure the mobile phone supports Bluetooth function. II. For the diﬀerent kind of mobile phone On the mobile phone, select the Bluetooth set up. (Please refer to the instruction manual of your mobile phone on how to operate Bluetooth.) 2. "Car BT" should
Pyle PLMRDK18B | Instruction Manual - Page 11
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 97 (D) x 50 (H) Tone Controls • Bass (at 100 Hz) : ±10 dB • Treble (at 10 kHz) : ±10 dB Maximum Output Power • High power : 4x40 watts Current Drain • High power : 10 Ampere (max.) TUNING
Pyle PLMRDK18B | Instruction Manual - Page 12
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power Cause Solution The car does not work. weak Insert the antenna cable firmly Select a station manually