Pyle PLMT68 PLMT68 Manual 1

Pyle PLMT68 Manual

Pyle PLMT68 manual content summary:

  • Pyle PLMT68 | PLMT68 Manual 1 - Page 1
    DIGITAL ILLUMINANCE METER INSTRUCTION MANUAL PLMT68 www.pyleaudio.com
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 2
    Ⅰ INSTRUCTION  The digital illuminance meter is a precision instrument used to measure illuminance (lux, footcandle) in the field.  It is meet CIE photopic spectral response.  It is fully cosine corrected for the angular incidence of light.  The illuminance meter is compact, tough and easy to
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 3
     Meter corrected for spectral relative efficiency.  Correction factor need not be manually calculated for non-standard light sources.  Short rise and fall times.  Peak-hold function for tracing the peak signal of light pulse with least duration 10μs and keep it.  Capable of selecting measuring
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 4
     Spectral Response: CIE Photopic. (CIE human eye response curve).  Spectral Accuracy: CIE Vλ function f1'≦6%  Cosine Response: f2' ≦2%  Accuracy: ±5% rdg±0.5% f.s.  Repeatability: ±3%  Sampling Rate: 13.3 times/sec of analog bar-graph indication;1.3times/sec of digital display.  Photo
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 5
     Photo detector Dimensions: 115L×60W×20H(mm);  Meter Dimensions: 170L×80W×40H;  Weight: 390g.  Accessories: Carry case, instruction manual, battery. Ⅳ NAME OF PARTS AND POSITIONS 5
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 6
    1 2 3 7 4 8 12 5 9 6 10 11 1. LCD Display: 3-3/4 digit displays with a maximum reading of 3999,and the indicating signs of measured values, unit function symbols and decimal points etc are display. 2. Range Selector key: It indicates 40.00 lux, 400.0 lux,4000 lux,40.00 Klux and 300.0
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 7
    meter ON or OFF. 4. MAX/MIN key: Maximum and minimum reading recorder control key. 5. RESET key: Push function reset control key. 6. BACK-LIGHT key: Back light 76lux. 12. Photo detector. Ⅴ OPERATING INSTRUCTIONS 1. Power-up: Press the power key to turn the meter ON or OFF. 2. Selecting the lux
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 8
    press PEAK key cycle through Pmax and Pmin recorder mode, and expose the photo detector to light pulse measuring field. Press and hold down PEAK key 2 seconds to exit PEAK recorder mode, then the meter will resume normal operation. 8. Maximum and Minimum recorder mode: Press MAX/MIN key to cycle
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 9
    ) ,auto-power-off function and counter will be reset. 11. Back-light function: Press the Backlight key to turn on. Press again to turn off. 12. When the measurement is completed, replace the photo detector cap and turn the meter off. Ⅵ BATTERY CHECK-UP & REPLACEMENT 1. As the battery power is not
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 10
    Ⅶ SPECTRAL SENSITIVITY CHARACTERISTIC  To the detector, the applied photo diode with filters makes the spectral sensitivity characteristic almost meet C.I.E.(INTERNATIONAL COMMISSION ON ILLUMINATION) Photopic curve V (λ) as the following chart described. Ⅷ MAINTENANCE 1. The white plastic
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 11
    4. The calibration interval for the photo detector will vary according to operational conditions, but generally the sensitivity decreases in direct proportion to the product of luminous intensity by the operational time. In order to maintain the basic accuracy of the instrument, periodic calibration
  • Pyle PLMT68 | PLMT68 Manual 1 - Page 12
    HOTEL STORE Public room, Cloakroom Reception Cashier Indoors Stairs Corridor Show window, Packing table HOSPITAL Forefront of show window Sickroom, Warehouse SCHOOL Medical Examination Room Operating room, emergency treatment Auditorium,Indoor Gymnasium Class room Laboratory, Library, Drafting
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

DIGITAL ILLUMINANCE METER
INSTRUCTION MANUAL
PLMT68
www.pyleaudio.com