Pyle PLUTV42CH Instruction Manual
Pyle PLUTV42CH Manual
 |
View all Pyle PLUTV42CH manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PLUTV42CH manual content summary:
- Pyle PLUTV42CH | Instruction Manual - Page 1
PLUTV42CH 800W Waterproof Marine Speakers + 2 Ch. Rated Amplifier PowerSport Amp for ATV, UTV, 4x4, Jeep, Wired RCA, AUX, and MP3 Audio Input Cable, for Boat Stereo Speaker & Other Watercraft - Pyle PLUTV42CH | Instruction Manual - Page 2
reasons, keep the volume of your audio system moderate so that you can still hear normal traffic sounds in a reasonable distance. WIRING INSTRUCTIONS POWER CONNECTION The battery terminal (BATT ) must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage - Pyle PLUTV42CH | Instruction Manual - Page 3
REMOTE TURN-ON CONNECTION The amplifier is turned on by applying +12V to the remote turn-on terminal (REM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the vehicle/or boat stereo resources which will provide the +12V only when the stereo resources is turned on - Pyle PLUTV42CH | Instruction Manual - Page 4
+ 12V = POWER SUPPLY Connect the BATT terminal to the positive pole of the battery with a lead cable and add a fuse into the power cable in a distance of not more than 30 cm from the battery. The lead cable's diameter should be at least 4 mm' for a length of 3 m and 6 mm" for a length of 6 m. REM ( - Pyle PLUTV42CH | Instruction Manual - Page 5
NOTES ON THE POWER SUPPLY • Connect the +12V power input lead only after all other leads have been connected. • Be sure to connect the ground wire of the unit securely to a metal part of the vehicle/or boat. • Loose or faulty connection may cause amplifier malfunction • REM: The unit is turned on by - Pyle PLUTV42CH | Instruction Manual - Page 6
less prone. There is often interference caused by the generator (piping), ignition (cracking) or other vehicle/or boat electronic parts. Most of these problems can be eliminated by correct and careful cabling. In doing so, here are the following guidelines: • Use only a screened audio cable for the - Pyle PLUTV42CH | Instruction Manual - Page 7
the lowest contact resistance. • Should all these meaures be without any success, the use of a ground loop isolator may solve the problem. PLUTV44CH Speaker Installation Speaker Mounting suggestion as below: Auto Reconnection: Step 1: Unbolting the mounting bracket. Step 2: Slide in the buckle with - Pyle PLUTV42CH | Instruction Manual - Page 8
Step 5: Use Butt Connector accessories to Connect Speaker wires (See Illustration 1,2,3). Features: • Waterproof Rated Speakers • Pro Audio Power Sports Amplifier System Kit • 2-Channel Marine Audio Amplifier • Marine Grade Rugged Construction • Waterproof Rated & Weather-Resistant Connectors • - Pyle PLUTV42CH | Instruction Manual - Page 9
in the Box: • (2) 4'' -inch Marine Speakers • Compact 2 Channel Marine Amp • (2) 2 Meters Speaker Wire • Audio Connection Cable, 3.5mm • Owner's Manual • Warranty Card • (2) 150x19x6mm (LxWxH) EVA Pads • (2) 165x19x2mm (LxWxH) EVA Pads • (4) Butt Connector (Red Color For A.W.G 16-22) Technical Specs - Pyle PLUTV42CH | Instruction Manual - Page 10
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: [email protected]
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
PLUTV42CH
800W Waterproof Marine Speakers
+ 2 Ch. Rated Amplifier
PowerSport Amp for ATV, UTV, 4x4, Jeep, Wired RCA, AUX,
and MP3 Audio Input Cable, for Boat Stereo Speaker & Other Watercraft