Pyle PSPL01 PSPL01 Manual 1
Pyle PSPL01 Manual
 |
View all Pyle PSPL01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PSPL01 manual content summary:
- Pyle PSPL01 | PSPL01 Manual 1 - Page 1
User's Manual Sound Level Meter - Pyle PSPL01 | PSPL01 Manual 1 - Page 2
conditions 1 Altitude up to 2000 meters 2 Relatively humidity 90% max. 3 Operation Ambient 0~40℃ Maintenance & Clearing 1 Repairs or servicing not covered in this manual should only be performed by qualified personnel. 2 Periodically wipe the case with a dry cloth. Do not use abrasives or - Pyle PSPL01 | PSPL01 Manual 1 - Page 3
you for using our Sound Level Meter. To ensure that you can get the most from it, we recommend that you read and follow the manual carefully before use. This Sound Level Meter has been designed to meet the measurement requirements of safety Engineers, Health, Industrial safety offices and sound - Pyle PSPL01 | PSPL01 Manual 1 - Page 4
to 60℃( 14 to 140 oF) Storage humidity : 10 to 75%RH Dimensions : 210(L)X55(W)X32(H)mm 135g (including battery) Weight : 9V battery, carrying case, Instruction manual.. IV. Name and Functions 1 2 7 3 4 5 46 - Pyle PSPL01 | PSPL01 Manual 1 - Page 5
① Windscreen & 1/2 inch Electret Condenser microphone If you operate at wind speed over 10m/sec, please put protective accessories on microphone. ② MAX/MIN button MAX The max. Hold position is used to measure the maximum level of sounds. The maximum measured level is up dated continuously. Press - Pyle PSPL01 | PSPL01 Manual 1 - Page 6
⑦ Tripod nut Hold the instrument comfortably in fix on tripod V. Measurement Preparation (1) Battery loading Remove the battery cover on the back and put in one 9V Battery. (2) Battery Replacement When the battery voltage drops below the operating voltage, mark "BAT" appears. If it appears, battery - Pyle PSPL01 | PSPL01 Manual 1 - Page 7
VII. Measurement (1) Open battery cover and install a 9-volt battery in the battery compartment. Turn on power. (2) Hold the instrument comfortably in hand or fix on tripod and point the microphone at the suspected noise source, the sound pressure level will be displayed. (3) When MAX/MIN (maximum/ - Pyle PSPL01 | PSPL01 Manual 1 - Page 8
8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
User’s Manual
Sound Level Meter