Pyle PSWGP405BK PSWGP405BL Manual 1
Pyle PSWGP405BK Manual
View all Pyle PSWGP405BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PSWGP405BK manual content summary:
- Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 1
Back Cover Front Cover - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 2
's smallest of its kind and yet fully water resistance. It can withstand immersion in 30 meters of water. The GPS navigation function locates and tracks your position wherever you go. GPS watch is powered by a highly sensitive chip that tracks your position even at weak signal condition. It can be - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 3
your Upper and Lower heart rate limits. This product set, like most electronic or magnetic devices that may interfere with pacemaker. While it is safe for situation as the receiver collects satellite data constantly as long as the GPS of the watch is on. The Altitude is taken at Mean Sea Level in - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 4
installation. This equipment generates, uses and radiates radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 5
on the surface of the contact points may affect normal charging and data transfer. DO NOT expose the watch to strong chemicals such as gasoline and alcohol as they will damage the watch. Store the watch in a dry place when it is not in use. Remove the battery from the Chest Strap when - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 6
charge keeps the watch running for a year without using GPS function. Heavy usage of GPS can last for target heart rate zones Above/In/Below Zone timer Audio above/In/Below zone alert Navigation functions Total 10 arrival Manual and automatic waypoint marking (Smart Lap) Electronic Compass - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 7
B. Unit Overview: Name of the Parts (Watch) [EL] Light Button LCD Display [Start/Stop] [S/S] Button [View] Button Clip Guiding Notch [Mode] Button Front [Lap/Reset] [L/R] Button GPS antenna location - always direct antenna towards sky for best GPS reception B-02 USB Cable Contact points Back - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 8
B. Unit Overview: Name of the Parts (Chest Strap) Battery Hatch B-03 Front Conductive Contact Pad Back Built-in Antenna (underneath the case) Conductive Contact Pad - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 9
Functions Part 4 B-04 CD ROM PC application software GPS Master The detail instruction on how to use the watch CD RO M GPS Watch GLOBAL POSITIONING SYSTEM with Heart Rate Monitor OWNER'S MANUAL Manual Manual Instruction on how to use the watch Elastic Bend Mount the Chest Strap on users - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 10
C. Setting Up: Replace Battery for the Chest Strap C-01 battery hatch Old CR 2032 New CR 2032 CR 2032 Close position maker Open position maker 1 2 3 4 Turn the battery hatch anticlockwise until the arrow aligns with the open position marker (arrow). Then turn one step further slightly - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 11
by moist paper towel, and wipe it dry with dry paper to remove grease. - Use the Chest Strap in a place within 3 meters from the Watch, otherwise the Watch CANNOT receive the data from the Chest Strap. WARNING: - DO NOT adjust the Chest Strap too tight, it may hinder the blood circulation and - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 12
C. Heart rate Monitor Function: Strap Pairing C-03 Strap Pairing Every Chest Strap (HRM) is assigned a unique ID when it was manufactured in the factory. The watch has to be paired up with it before use. This is to avoid interference with other users who are using the same equipment. Pairing has - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 13
gauge function is provided. The approximate remaining time left, when working with GPS, is calculated by pushing the [V] button once in TIME mode. This To charge the battery: 1) Align the clip guide and pins with the notch and contacts at the bottom of the watch 2) Make sure the clip is secured 3) - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 14
. It can be treated independently as scattered waypoints; or linked in sequential order (either forward or backward). Linked waypoints form a PATH (or route). GPS Watch has 10 Paths. Each path has a maximum of 99 waypoints. Paths can be created by Lap-To-Waypoint function. Or they can be created by - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 15
re-starting, satellite data is still valid. It takes only a few seconds to locate your position. This is known as the Hot start. GPS Master GPS Master is a PC application software which is written to work with GPS watch. Workout log and paths can be downloaded / uploaded easily via the USB cable - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 16
VIEW LAP/RESET Press to enter sub-modes or workout views Press to make selection/confirmation Hold to turn on GPS at Workout / Navigation Mode Press to move backward Press to decrease watch data Press to Start/Stop Workout / Chronograph Press to take laps in Workout Mode Hold to save Waypoint at - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 17
D. Getting Start: Main Function Modes Compass [M] [M] Time mode [M] [M] Navigation Workout mode Main Function Modes D-04 - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 18
the Navigation mode. Start, stop, lap, GPS shortcut operations are common to both modes. is quite a painful task if it is done by a watch which only has 4 buttons. Each profile has 3 views a list of fields. This allows users to review selected fields in their own interest. Profile configuration - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 19
the Workout mode Press [S/S] to Start/Stop the Workout. GPS and HRM functions are turned ON automatically at start if it has not been done manually. Mark Laps Press [L/R] to take Laps. The maximum chapter to select the Workout profiles, customize the display data and review the workout history. - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 20
been stopped for a long time, say more than 2 hours, it is recommended to start the GPS manually, especially when you want to have track logging done at the beginning of workout. It is because the GPS cold start time is long. Usually it takes approximate half a minute. During the cold start period - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 21
E. Workout Mode - Workout Profile E- 03 Line 1 Line 2 Line 3 Workout mode [V] [V] How to select Workout Profile h Hold [M] under any mode to enter Setting Menu > Workout > Profiles > Select h Press [V] to confirm How to customize the Workout view data hHold [M] under any mode to enter Setting - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 22
E. Workout Mode - Workout History E- 04 How to review Workout History from the watch Hold [M] under any mode to enter Setting Menu > Workout > History Then the summary of the latest record will be shown. View Workout summary: Workout data - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 23
SmartLap>"Lap->WP" This is a very useful feature for creating a PATH by the watch alone. One of the 10 PATHs has to be dedicated for this purpose. This if it is added by Lap-By-Distance or by pushing lap button manually, the current location is added as the latest waypoint of the dedicated path - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 24
>Navigation>NavMode>Backward - On the Navigation-Goto screen, select the last waypoint of Path9 as the current waypoint - Start Navigation, follow the Heading Pointer. The watch will guide you from the last waypoint to the starting point precisely. - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 25
E. Workout Mode - TrackLog interval E- 07 5 10Min 08 3 10Min 4 10Min Path Track Log 2 10Min 1 Example: TrackLog has been set for 10Min GPS watch records your track continuously. The sampling interval is specified by the value in the TrackLog setting. Default is 4 seconds. It can be set from - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 26
gives you all the information you need when you are navigating to a waypoint. Goto screen allows you to pick a waypoint from the current path. Introduction GPS watch is able to keep 10 paths simultaneously. But you can work on a single path at a time. This is known as the current path. To select - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 27
F. Navigation Function F- 02 Backward mode The first waypoint is the destination. Select this mode if you want to navigate along the path in reverse order. For example: from the last waypoint to the first one on the current path. Pick the nearest waypoint on the Goto screen before you start. If - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 28
before. Turn ON GPS by Holding [V]. Or if you want to have workout logged, just press [S/S] to start workout. Then wait for GPS to be fixed Default name "WayptXX" is assigned to a waypoint automatically by the watch when it is marked manually or created by Smart Lap. Where XX is a sequence number - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 29
the heading pointer Once GPS has been fixed, the heading pointer starts to work. Make sure that the electronic compass has been calibrated properly (See compass calibration details in the System Setting chapter) and the watch is maintained at - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 30
: You should have GPS Master installed in the PC first. See the GPS Master installation and user's manual for details. Run GPS Master Activate the watch and plug in the USB cable. Then Click the "PC>Watch" button in GPS Master. Path(s) in the Current Path table will be transferred to the watch - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 31
can be specified in either cardinal direction or azimuth. This watch includes both cardinal direction and azimuth. The 16 cardinal directions commonly used forms of directions. They include North, South, East and West. This electronic compass has Primary (NE, NW, SE, SW) and Secondary (NNE, ENE, - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 32
: Menu > Settings > System > Compass > Calibrate While calibrating, turn the watch 360 degree horizontally. You will see the trace of dots forming the outline of a rectangular box when the watch is rotating. Calibration is done when the outline is filled completely - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 33
) Working with the HRM is simple. Wear the chest strap as mentioned earlier. The strap should be turned ON by itself. At the watch, press [S/S] in Workout mode. The watch will display an icon "HR" with the chest strap in a couple of seconds. During your workout, the HR is stored at the - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 34
H. Heart rate (HR) Zone % EMHR Upper Limit Lower Limit Health Fat Aerobics User Bur n Above Zone 65% 75% 80% In Zone 50% 55% 65% User defined Below Zone Heart Rate Zone H- 02 How to Use Target Heart Rate Zone Setting target HR zone is very important for your personal training plan. If you - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 35
or higher Window XP/VISTA/7 operating system CD-ROM drive USB port Follow the instructions in the GPS master setup wizard to install the program. After installation, restart your PC. Clip the USB cable to the watch and plug the cable into the PC's USB connector. Once connected, "Connected icon - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 36
I. PC Connection Function How to setup a new user - Enter User name in the New user dialogue box - Press 'Add' How to synchronize data between the watch and the PC -On PC screen > Data transfer > Receive the Watch Data - Workout data will be shown on screen I- 02 PC Screen - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 37
other words, when there is a satellite and the GPS is turned on occasionally. The time is synchronized with the satellite's clock. You don't need to bother adjusting the watch. The time is always accurate. If there is no satellite coverage, manual time setting is also available. Hold [M] under any - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 38
most of the time, but there are exceptions. If the time zone set by GPS does not reflect your local time correctly, adjust the time manually. Manual time setting Menu > Settings > TimeDate > HomeTime > Manual Set time and date in the following sequence: Second > Minute > Hour > Year > Month > Date - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 39
K. Battery life - remaining power K -01 Check Battery life - remaining power Press [V] in Home time mode > Battery Battery life remaining hours will be shown Battery Life Time Remain hour - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 40
L. Timer Function Timer mode Timer time Current time L -01 How to use Timer i Press [V] in Home time mode > Battery > Timer i Press [S/S] to start or stop i Press [L/R] to reset to the preset time i Beep sound will be heard in the last 10 seconds i Long beep will be heard once reaching 0:00:00 - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 41
M. Alarm Function Alarm time Alarm mode M -01 Alarm No. How to use the Alarm Press [V] in Home time mode > Timer > Alarm Press [S/S] to select 1 - 5 Alarms Press [L/R] to turn the alarm Battery > On/ Off Alarm Day How to set the Alarm Hold [M] under any mode to enter Setting Menu > - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 42
N. Dual Time Mode Dual Time mode Dual Ti m e Home Ti m e N -01 How to use Dual Time Press [V] in Home time mode > Battery > Timer > Alarm > Dual Time How to set Dual Time Hold [M] under any mode to enter Setting Menu > Settings > Time Date > Dual Time Select Dual Time Press [S/S] or - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 43
O. User settings To get the accurate workout data, the user's data setup is important. Hold [M] under any mode to enter Setting Menu > Settings > User Gender or BirthDate or Weight Gender Press [S/S] or [L/R] to select Male or female Press [M] to confirm Date of Birth Press [S/S] or [L/R] - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 44
the chapter - Compass function mode settings Language Select languages Press [V] to confirm System Reset Select No/Yes Press [V] to confirm NOTE: This will reset the watch to the factory default settings. All data will be cleared. - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 45
Q. Memory Usage Memory Usage Display Q -04 How to check the Memory Usage Hold [M] under any mode to enter Setting Menu > Memory - Pyle PSWGP405BK | PSWGP405BL Manual 1 - Page 46
a Power Saving Function which can turn off the LCD display so that the battery can last longer. While in the Power Saving Mode, the watch function is still working normally. (i.e. The timekeeping function is still running during the Power Saving Mode.) How to enter/exit the Power Saving Mode To