Pyle PTT25UBT Instruction Manual

Pyle PTT25UBT Manual

Pyle PTT25UBT manual content summary:

  • Pyle PTT25UBT | Instruction Manual - Page 1
    Bluetooth Turntable Player with/ AM/FM Stereo Radio and USB Flash Drive PTT25UBT INSTRUCTION MANUAL www.pyleaudio.com
  • Pyle PTT25UBT | Instruction Manual - Page 2
    . If the replacement is required, please send to an experienced technician or the device manufacturer. 11. For cleaning the device, please follow these instructions. 12. The power cord should be unplugged if not used for a long period of time. 13. Device shall be repaired by a qualified person
  • Pyle PTT25UBT | Instruction Manual - Page 3
    BATTERY INSTALLATION The battery compartment is located on the back of the remote control. 1. Remove the battery compartment door by pressing in on the tab and lifting it off. 2. Insert two (2) AAA size batteries (not included) into the battery compartment following the polarity markings inside the
  • Pyle PTT25UBT | Instruction Manual - Page 4
    Bluetooth indicator 17) Power On/Off-Volume knob 18) Tuning Knob 19) Power LED indicator 20) Spindle Adaptor 21) Turntable by anyone except qualified service personnel. Precautions for use your system is ready to play music. Listening to radio Manual tuning 1. Turn on the Power (17) and select
  • Pyle PTT25UBT | Instruction Manual - Page 5
    the record and return to the rest. 8. To stop manually, lift the tone arm from the record and return it 5mm plug. The channel will change to Aux automatically and turntable will stop rotating. Please ensure the Aux in jack (24 not support connection with USB extension cable and is not designed
  • Pyle PTT25UBT | Instruction Manual - Page 6
    LED indicator (16) will be flashing, this means the Bluetooth not connected yet / searching mode. 3. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select "PTT25UBT" Bluetooth equipment to connect. 4. Once the connection is finished and connection is successfully
  • Pyle PTT25UBT | Instruction Manual - Page 7
    of Phono into MP3 file The system is able to encode the Phono to MP3 format and recording at memory media with USB connected port (support maximum up to 2GB memory size). A) Phono encoding 1) Set the Function knob (7) to "Phono/Aux" made and then press " Rec" Button(1). 2) The Record LED indicator
  • Pyle PTT25UBT | Instruction Manual - Page 8
    forward or backward Press to stop playback or cancel the stored program Press to active Repeat/Random function Press to divide the recording track at turntable one by one during Press to active recording function Press and hold few second to delete the current MP3 file 5
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Bluetooth Turntable Player with/ AM/FM Stereo
Radio and USB Flash Drive
PTT25UBT
INSTRUCTION MANUAL
www.pyleaudio.com