Pyle PVNTT1R PVNTT1R Manual 1

Pyle PVNTT1R Manual

Pyle PVNTT1R manual content summary:

  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 1
    Classic Retro USB Phonograph/Turntable With Aux-In Jack MODEL:PVNTT1 Operating Instructions Manual
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 2
    maintenance INSIDE REFER SERVICING (servicing) instructions in TO QUALIFIED SERVICE the literature accompany- PERSONNEL. ing the appliance. IMPORTANT SAFETY INSTRUCTIONS 1.) Read these instructions. 2.) Keep these instructions. 3.) Heed all warnings. 4.) Follow all instructions. 5.) Do not use
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 3
    ,, PREPARATION FOR USE UNPACKING AND SET UP Carefully remove the unit from the display carton and remove all packing material from the unit. Unwind the AC power plug and extend it to its full length. Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 4
    NEVER FORCE THE LID CLOSED. ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET. PROTECT YOUR FURNITURE This model is equipped with non-skid rubber 'feet small self-adhesive felt pads, available at hardware stores and home improvement centres everywhere, and apply these pads to the bottom of
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 5
    FRONT PANEL 1) PHONOGRAPH LID 2) TURNTABLE 3) TONE ARM 4) PC-USB SLOT 5) PH-AUX SWITCH 6) AUX IN SOCKET(L/R) 7) LINE OUT SOCKET(L/R) 8) AC POWER LINE PLUG 4
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 6
    PH-AUX switch to AUX position. Rotate the volume control to desert level. 2) Insert the audio cable (not included) into the matching "AUX IN" (L/R) socket of the unit, operate A as usual and through the speaker of the unit, we can hear the sound exported from A. the unit external device(A) PC
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 7
    record player stops. 7) To turn the system 'off' , switch the PH-AUX selector to the AUX position. NOTE: Do not turn or stop the turntable manually. Moving or jarring the Turntable without securing the Tone Arm clamp could result in damage to the Tone Arm. IMPORTANT!! TO PROTECT THE TURNTABLE FROM
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 8
    AUX IN/PHONO RECORDING 1、 Set the PH-AUX switch to PH or AUX in position, playback the tacks on the AUX or PHONO. 2、 Install the Audacity software using the included disc. 3、Set the computer before record: 1) Set the volume control attribute record(R) YES and then adjust the volume to max..
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 9
    Audacity and USB Connection It supports Window 95 /Window XP/Window 7/Vista or more advanced version, with the EMS memory more than 128MB and Audacity takes space of 5MB. INSTRUCTION FOR PC RECORDING 1. Software installation 1.1) Insert the CD disk into drive of PC,and read it; 1.2) Open the
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 10
    1.4) Press"next" to go forward; 1.5)Choose the desitination location, and press to go forward; 9
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 11
    1.6) Press"next" to go forward; 1.7) Waitting for installation finished, and press"finish"to end the installation; 1.8)Choose the language as user's need; 10
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 12
    2. Recording: 2.1) Open the software; 2.2) Choose "Edit"menu,then choose"Preferences"; 2.3.Audacity Preferences 11
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 13
    NOTE: you need to check your computer audio properties,the sound recording should be selected "sss usb Audio Device" as below. 2.4. Adjust the output and input volume. Output Volume Input Volume 2.5.Select the record button • to record the disc, the left and right
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 14
    2.5.1 Press this button •,start recording. 2.5.2 Click the button to skip to start; 2.5.3 2.5.4 2.5.5 2.5.6 Click the Click the Click the Click the button to skip to end; button to play; button to pause the record play, button to stop the recording. 3. Export the Music Files for WAV,MP3,Format.
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 15
    3.3) After opened, it will come to the following menu, click"YES" to go to "Llame-enc. dll", and find the file"s Iocation. 3.4)After you find the"lame-enc.dl"file,open it and dick "Y" to finish the installation. 14
  • Pyle PVNTT1R | PVNTT1R Manual 1 - Page 16
    THE TURNTABLE DRIVE BELT IS FACTORY FITTED - USE THESE INSTRUCTIONS ONLY IF THE TURNTABLE FAILS TO REVOLVE.... STEP 1 Use a screwdriver to remove the black iron C-clip and lift the turntable off the phonograph mechanism. STEP 2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

MODEL PVNTT1
Operating Instructions Manual
:
Classic Retro USB Phonograph/Turntable
With Aux-In Jack