Pyle PVTC1000U User Guide

Step

‐

Up / Step

‐

Down Transformer for 110/220 Volts with 5V USB

Model

Maximum Power Rating

PVTC120U

100 Watt

PVTC220U

200 Watt

PVTC300U

300 Watt

PVTC320U

500 Watt

PVTC740U

750 Watt

PVTC1000U

1000 Watt

PVTC1500U

1500 Watt

PVTC2000U

2000 Watt

PVTC3000U

3000 Watt

PVTC4000U

4000 Watt

PVTC5000U

5000 Watt

PVTC10000U

1000 Watt

*These maximum power ratings must not be exceeded by the appliance(s) connected to the transformer.

To Convert 100 Volts to 220 Volts:

1.

Make sure the appliance to be plugged in uses fewer watts than the transformer’s rating.

2.

Insert the voltage tap plug (located on the rear of the transformer) into the pair of holes marked ‘110’.

3.

Plug the transformer’s power cord into a source of 100 Volts.

4.

220 Volts will be available at the front panel outlet marked ‘220 Volts’ when the power switch is turned on.

To Convert 220 Volts to 110 Volts:

1.

Make sure the appliance to be plugged in uses fewer watts than the transformer’s rating.

2.

Insert the voltage tap plug (located on the rear of the transformer) into the pair of holes corresponding

to the local voltage standard (200, 220 or 240 Volts). Check carefully to be sure no error is made.

3.

Attach round

‐

pin adapter to the transformer’s power cord and connect into the source of 200, 220 or 240 Volts.

4.

110 Volts will be available at the front

‐

panel outlet marked ‘110 Volts’ when the power switch is turned on.

To prevent damage and possible fire hazards, the fuse should be replaced with a slow

‐

blow fuse (MDL) of the same

amperage rating as the original if the fuse continues to blow, the transformer and/or the appliance connected to the

unit may need repair. No warranty will be honored if transformer is burned out by exceeding these ratings.

www.PyleAudio.com