Pyle PWMA20 PWMA20 Manual 1

Thank you for choosing our waistband amplifier which will bring you

inconceivable, endless of comfort and convenience in your future work

and life.

This waistband amplifier is perfect to be used in indoor and outdoor

activities such as small meetings, parties, teaching, karaoke, sales

propagandas and auctions etc.

OPERATION:

1. Open the battery cover of the amplifier and install 6 pcs 1.5V AA

batteries or 1.2V AA rechargeable batteries with the same

specification. And then close the battery cover.

2. Put the amplifier on waist. Adjust the attached belt to advisable length.

Then clip and fasten it on the back side.

3. Insert 3.5mm plug of the microphone into 3.5mm MIC in jack on the

amplifier.

4. Wear headset MIC around your head. Keep MIC head close to your

mouth.

5. Turn ON/OFF switch clockwise to adjust the volume to suitable level.

Now you are ready to use the instrument.

NOTE:

1. AC/DC adapter is optional for choice. AC/DC adapter can be used to

charge rechargeable batteries and power the amplifier simultaneously.

2. Do not use AC/DC adapter when using non-rechargeable batteries.

SPECIFICATION:

1. Maximum power: 5W (with 4 Ohm load)

2. Distortion: 5% max @ 2W output

3. Frequency response: 100Hz-10KHz+/-3dB

4. Power supply: DC 9V

Waistband Amplifier

PWMA20

USER'S MANUAL