Pyle SLCPO Instruction Manual

www.SereneLIfeHome.com

Ultralight Sleeping Pad + Carrying Bag

Methods of Inflation

Easy Blow Up Technology: Open the gas nozzle and inflate with

your mouth (easily in under 60 seconds). Tighten the gas nozzle

after the inflation is complete. You can also adjust the hardness

as you wish:

if it is over inflated, you can open the gas nozzle to

deflate air, tighten the gas nozzle after that; if it is under inflated,

you can open the gas nozzle, inflate with your mouth until the

hardness of air bed is moderate. Finally, tighten the gas nozzle.

Method of Deflation

Open the gas nozzle, roll up the air bed from the end without

gas nozzle, deflate the air and tighten the gas nozzle. You can

repeat the above steps; deflate the air in the bed as completely

as possible in order to get a smaller collection volume.

Storing Your Sleeping Pad

1. Lay flat the air bed and open the gas nozzle to inflate the air bed, preserve it in a

cool place.

2. Be sure to preserve the air bed in the state of inflation in order to ensure that the

elasticity of stretch cotton will not be impaired if it is left unused for long time.

Cleaning Your Sleeping Pad

Tighten the gas nozzle after it is inflated; clean it with a soft brush and neutral

detergent. After that, flush it with clean water. Finally, preserve it after it is dried

naturally.

Notes:

1. Please place it in a place out of the pets’ reach.

2. Please do not use the air bed as buoyant apparatus.

3. Keep it away from flame or hot objects; do not exposure it under sunlight for long

time.

4. Please put protection cloth under the air bed if it is not used in tents to protect it

from puncturing by sharp plants or debris.

5. Please do not put an inflatable air bed which gas nozzle has been tightened in a

car or tent under sunlight to prevent the air bed from being damaged by over

inflation.