Pyle SLOTOSPE008 Instruction Manual

OTOSCOPE

GENERAL

MAINTENANCE

CHANGING SPARE PARTS:

1. Changing

the

bulb (fig.4)

•

Turn off the power and screw the viewing window off the

slot on bottom of the head

• Pull out the old bulb in the metal support and replace

with new one

• Screw the viewing window back on to the slot.

Attention:

• Please use the specialized bulb (Model : 8108) for this

device.

• After the bulb burns out, the temperature

will remain

high for approximately 5 minutes. Please wait for a

moment to avoid injury.

2. Changing

the

batteries (fig.5)

• Screw the head off the handle

• Remove the old AA batteries, and replace with new ones.

Ensure the anode of the batteries points to the head of the

device

• Screw

the head back on the handle.

Attention:

• AA alkaline batteries are recommended.

• Replace all batteries simultaneously and do not use alkali

manganese batteries with lithium as bulb life will be

reduced.

• Do not leave worn batteries

in the handle.

• Please take out batteries from the device if not in use for a

prolonged period.

Batteries

should be disposed of in accordance with

local regulations.

Cleaning and Disinfection:

• Clean the surface of device with 75% alcohol solution at

least once a week, avoiding the magnifying

glass

(viewing window) in the head. And corrosive or polishing

detergent is prohibited.

• Disinfect the tips of otoscope with saturated steam for 20

minutes at 273.2°F

Attention:

Do not soak , autoclave or let water dip into the device!

SPECIFICATION

User Manual

SLOTOSPE008

OTOSCOPE

by

USER MANUAL

Otoscope instructions for ophthalmologist. It is an internally

powered device. Please read through this brochure before

use, and keep it handy for future reference.

Manufacturer

Authorized Representative in the

European Community

Symbol for the marking of electrical and

electronics devices according to Directive

2002/96/EC. The device, accessories and the

packaging have to be disposed of waste

correctly at the end of the usage. Please

follow Local Ordinances or Regulations for

disposal.

Type B Applied Part

Attention, consult accompanying doctuments

SYMBOLS:

ELECTRICAL CLASSIFICATION

Equipment Classification with respect to protection from

electric shock: Internally powered equipment.

Degree of protection from electric shock: TYPE B.

Equipment not suitable for use in the presence of flammable

mixture: Yes.

Mode of operation: intermittent operation.

The manufacturer reserves the right to make technical

changes without notice in the interest of progress. Prior

notices will not be given in case of any amendments within

this manual.

Illumination

Luminance

Magnification

Tip Sizes

Bulb

Batteries

Operation

Storage &

Transport

Standards

Direct Illumination

24 Lumen

3 x

2.4mm, 3mm, 4mm, 5mm

Specified Model: 8108 2.5V,

0.75A, 3050K,25hrs

2 AA alkaline batteries

Temperature

50°F~ 95°F

Humidity

30% ~ 75%

Air pressure

700 hPa - 1060 hPa

Temperature

-68°F ~ 158°F

Humidity

10% ~ 90%

(without condensation)

Air pressure

500 hPa - 1060 hPa

MDD 93/42/EEC Class I

IEC 60601-1:1995, IEC 60601-1-2:2007

SAFETY INFORMATION

To assure the correct use of the product, basic safety

measures should always be followed including the

warnings and cautions listed in this instruction manual.

WARNINGS & CAUTIONS:

• Do not use the device where it may be exposed to

flammable gas.

• Protect this device from water, moisture, Impact,

dropping, direct sunlight, heat and fire.

• Do not touch the lens directly by hand or something hard.

• Please use the bulb type specified in this instruction

brochure.

• Keep the device out of the reach of unsupervised infants

and children.

• Do not disassemble or attempt to repair the device or

components.

DESCRIPTION:

The otoscope is a classic medical device in ENT. As a

traditional diagnostic otoscope, HS-OT10J adopts Direct

Illumination

Technology. It is used to view the tympanic

membrane and external ear canal to diagnose outer and

middle ear pathologies.

TECHNICAL

SPECIFICATIONS:

• Enhanced XHL Xenon Halogen Technology.

• 3X magnification for the viewing window.

• 8108 bulb used.

HOW TO USE THIS DEVICE

• Turn on (or off) the device by pushing downwards (or

upwards)

as fig.1

• Select a reasonable tip for patient's ear canal and push it

onto the hand and screw the tip clockwise, refer to fig.2.

Generally, the tip size of

4mm is for adult and 2.4mm is for

children

• Put the otoscope with a tip into the ear canal of patient

(fig.3), and examine through the viewing window which is

with 3X magnification

Attention:

The otoscope should only be used to examine ear when a

tip is fitted.

It is an intermittent operated device, 1 minute

ON, 5 minutes

OFF.

PERIODIC SAFETY CHECKS

Preventive inspection and maintenance to be performed

including the frequency of such maintenance. The following

safety check should

be performed at least every 12 months

by a qualified person who has adequate training,

knowledge, and practical experience to perform these tests.

• Inspect the equipment and accessories for mechanical and

functional damage.

• Inspect the safety relevant labels for legibility.

• Verify that the device functions properly as described in the

instructions for use.

Pyle SLOTOSPE008 Instruction Manual

Pyle SLOTOSPE008 Manual

Pyle SLOTOSPE008 manual content summary: