Rane MS1S MS1S Mic Stage Data Sheet
Rane MS1S Manual
View all Rane MS1S manuals
Add to My Manuals
Save this manual to your list of manuals |
Rane MS1S manual content summary:
- Rane MS1S | MS1S Mic Stage Data Sheet - Page 1
MANUAL MS1S MICROPHONE STAGE General Description The Rane MS1S Mic Stage preamplifier provides the answer when you need just one microphone input in an otherwise line-level world. Give us a call to go from either a dynamic, condenser or electret microphone The MS1S replaced the MS 1B Mic Stage with - Rane MS1S | MS1S Mic Stage Data Sheet - Page 2
MS1S MICROPHONE STAGE Features and Specifications Parameter Input Impedance Gain Range Phantom Power ..........Impedance Max. Input Level Equivalent Input Noise Signal to Noise Ratio Dynamic Range CMRR Frequency - Rane MS1S | MS1S Mic Stage Data Sheet - Page 3
to an electronic simulation of a transformer output. Rane follows the AES standard of pin 2 = hot. When running a long cable back to the mixer, run a line-level balanced line rather than a mic-level line. The compact MS 1S can mount closer to the microphone, provide a local volume control (or not - Rane MS1S | MS1S Mic Stage Data Sheet - Page 4
48V PHANTOM POWER MS1S MIC STAGE 1.636" 0.15" 0.775" .7" 100-240 V 50/60 Hz 3 WATTS 6.8" MS1S MADE IN U.S.A. RANE CORP. PIN 2: (+) PIN 3: (-) PIN 1: POWER NORMAL INVERT POLARITY LINE OUT MIC IN 2.5" 4.225" 4.26" Architectural Specifications The microphone preamplifier shall be a single
Data Sheet-1
MS1S
MICROPHONE STAGE
General Description
°e Rane MS1S Mic Stage preamplifier
provides the answer when you need just
one microphone input in an otherwise
line-level world. Give us a call to go from
either a dynamic, condenser or electret
microphone to a line-level input with a
minimum of noise, distortion, cost and
hassle.
°e MS1S provides 48 V switchable
Phantom Power with an indicator LED,
continuous rotary Gain trim between 15
dB and 60 dB, Signal/Overload LED, and
XLR balanced Input & Output connec-
tors. A Polarity switch and high-current
cross-coupled output line driver round out
the features.
°e MS1S utilizes one of the finest
ultra low noise amplifier designs available.
Featuring a true differential input with
high common-mode rejection, use of the
MS1S guarantees performance usually
found only in mixing consoles costing
thousands of times as much. Of course,
for all of that extra money you receive a
proportional increase in KPSI (knobs per
square inch).
°e MS1S replaced the MS 1B Mic
Stage with a new internal universal power
supply. °e width increased by one inch,
all other features are the same.
Features
•
-127 dB Equivalent Input Noise
•
Gain Control
•
Signal / Overload Indicator
•
Polarity Switch
DATA SHEET / MANUAL
•
Switchable 48 V Phantom Power
•
True Differential Input
•
Cross-coupled Line Driver
•
Internal 100-240 VAC Power Supply