Ridgid R213BNA Owners Manual

Ridgid R213BNA Manual

Get Ridgid R213BNA PDF manuals and user guides View all Ridgid R213BNA manuals
Add to My Manuals
Save this manual to your list of manuals

Ridgid R213BNA manual content summary:

  • Ridgid R213BNA | Owners Manual - Page 1
    OPERATOR'S MANUAL BRAD NAILER R213BNA Your brad nailer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the
  • Ridgid R213BNA | Owners Manual - Page 2
    of Terms ...7 n Features...8-9 n Assembly ...10 n Operation ...10-16 n Maintenance ...17 n Accessories ...17 n Troubleshooting...18 n Warranty ...19 n Customer Service Information...20 INTRODUCTION This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and
  • Ridgid R213BNA | Owners Manual - Page 3
    performed by unqualified personnel may result in a risk of injury. n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of injury. 3
  • Ridgid R213BNA | Owners Manual - Page 4
    ricochet, injuring you or a co-worker. Be aware that the nail may follow the grain of the wood, causing it to protrude unexpectedly from the side nailer against the material. The workpiece contact may cause the work material to shift unexpectedly. n Keep face and body parts away from back of the tool
  • Ridgid R213BNA | Owners Manual - Page 5
    hand or any part of body in fastener discharge area of tool. n Never point tool at anyone. n Do not pull the trigger or depress the workpiece contact as accidental actuation may occur, possibly causing injury. SAVE THESE INSTRUCTIONS n Refer to them frequently and use them to instruct others who may
  • Ridgid R213BNA | Owners Manual - Page 6
    servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing
  • Ridgid R213BNA | Owners Manual - Page 7
    A staple, pin, brad, nail, or other fastening device which is designed and manufactured for use in the tools within the tool. Operating control A control that separately, or as part of an actuation system, can cause the actuation of a tool. Trigger A tool operating control activated by a tool
  • Ridgid R213BNA | Owners Manual - Page 8
    FEATURES PRODUCT SPECIFICATIONS Operating Pressure...70-120 psi Fastener Type ...18 gauge brad nails Fastener Range ...5/8 in. to 2-1/8 in. Magazine Capacity...100 brad nails Air Consumption ...0.04 ft3/cycle at 100 psi Air Inlet ...1/4 in. NPT Weighted sound impulse power level...89.5 dBA Emission
  • Ridgid R213BNA | Owners Manual - Page 9
    BRAD NAILER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. ADJUSTABLE EXHAUST The exhaust can be adjusted to a variety of positions depending on operator preference. BELT HOOK The hook will rotate to either side of the tool
  • Ridgid R213BNA | Owners Manual - Page 10
    , please call 1-866-539-1710 for assistance. PACKING LIST Brad Nailer Case Sample Fasteners Eye Protection Hex Keys (3 mm and 4 mm) Fastener Guide Operator's Manual WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in
  • Ridgid R213BNA | Owners Manual - Page 11
    reseat. On-board storage for the pad is located on the magazine of the tool. An extra no-mar pad is provided in the on-board storage area. THE EXHAUST See Figure 3. The adjustable exhaust on the end cap of the tool allows the operator to direct the exhaust according to operator preference. To adjust,
  • Ridgid R213BNA | Owners Manual - Page 12
    AIR SUPPLY See Figure 4. DANGER: Do not use oxygen, combustible gases or bottled gases as a power source for this tool. The tool will explode and cause death or serious injury. This tool is designed to operate on clean, dry compressed air at regulated pressures between 70 and 120 psi . The correct
  • Ridgid R213BNA | Owners Manual - Page 13
    it securely snaps into place. WARNING: Use only the nails recommended for use with this tool (refer to the Fastener Guide). The use of any other nails can result in tool malfunction, leading to serious injuries. WARNING: Never load nails with the workpiece contact or trigger activated. Doing so
  • Ridgid R213BNA | Owners Manual - Page 14
    driving a fastener. This is a normal function of the tool. Do not attempt to prevent the recoil by holding the nailer against the work. Restriction to the recoil can result in a second fastener being driven from the nailer. Grip the handle firmly, let the tool do the work, and do not place second
  • Ridgid R213BNA | Owners Manual - Page 15
    desired depth with air pressure adjustments alone. If finer adjustments are needed, use the drive depth adjustment on the tool. DRIVE DEPTH ADJUSTMENT See Figure 8. The driving depth of the nail may be adjusted. It is advisable to test the depth on a scrap workpiece to determine the required depth
  • Ridgid R213BNA | Owners Manual - Page 16
    from the air supply before clearing a jammed fastener. Failure to do so could result in serious personal injury. If a nail or fastener becomes jammed in the tool, disconnect the air hose and keep the tool pointed away from you while clearing the jam. n �Open magazine and remove fasteners from the
  • Ridgid R213BNA | Owners Manual - Page 17
    servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool evaluating tool problems for these symptoms, trace the air supply from the tool to the
  • Ridgid R213BNA | Owners Manual - Page 18
    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Air leak near the top of the tool or in the trigger area Loose screws Worn or damaged O-rings or seals SOLUTION Tighten screws Install Overhaul Kit Air leak near the bottom of the Loose screws Tighten screws tool tool Install Overhaul Kit Tool jams
  • Ridgid R213BNA | Owners Manual - Page 19
    all defects in workmanship or materials and normal wear items for three years following the purchase date of the tool. Warranties for other RIDGID® products may vary. HOW TO OBTAIN SERVICE To obtain service for this RIDGID® tool you must return it; freight prepaid, or take it in to an authorized
  • Ridgid R213BNA | Owners Manual - Page 20
    OPERATOR'S MANUAL BRAD NAILER R213BNA Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
1
Your brad nailer has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
BRAD NAILER
R213BNA