Ridgid R250SFA Owners Manual

Ridgid R250SFA Manual

Get Ridgid R250SFA PDF manuals and user guides View all Ridgid R250SFA manuals
Add to My Manuals
Save this manual to your list of manuals

Ridgid R250SFA manual content summary:

  • Ridgid R250SFA | Owners Manual - Page 1
    OPERATOR'S MANUAL STRAIGHT FINISH NAILER R250SFA Your straight finish nailer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce
  • Ridgid R250SFA | Owners Manual - Page 2
    Rules...4-5 n Symbols...6 n Glossary of Terms ...7 n Features...8-9 n Assembly ...10 n Operation ...10-16 n Maintenance ...17 n Accessories ...17 n Troubleshooting...18 n Warranty ...19 n Customer Service Information...20 INTRODUCTION This tool has many features for making its use more pleasant and
  • Ridgid R250SFA | Owners Manual - Page 3
    or unstable support. Stable footing repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts
  • Ridgid R250SFA | Owners Manual - Page 4
    co-worker. Be aware that the nail may follow the grain of the wood, causing it nailer against the material. The workpiece contact may cause the work material to shift unexpectedly. n Keep face and body parts . n Choice of triggering method is important. Check manual for triggering options. n Do
  • Ridgid R250SFA | Owners Manual - Page 5
    : • Before making adjustments • When servicing the tool • When clearing a jam part of body in fastener discharge area of tool. n Never point tool at anyone. n Do not pull the trigger or depress the workpiece contact as accidental actuation may occur, possibly causing injury. SAVE THESE INSTRUCTIONS
  • Ridgid R250SFA | Owners Manual - Page 6
    servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing
  • Ridgid R250SFA | Owners Manual - Page 7
    usually by means of a threaded fitting. Fastener A staple, pin, brad, nail, or other fastening device which is designed and manufactured for use in the tools control that separately, or as part of an actuation system, can cause the actuation of a tool. Trigger A tool operating control activated by
  • Ridgid R250SFA | Owners Manual - Page 8
    FEATURES PRODUCT SPECIFICATIONS Operating Pressure...70-120 psi Fastener Type ...16 gauge finish nails Fastener Range ...3/4 in. to 2-1/2 in. Magazine Capacity...100 nails Air Consumption ...0.05 ft3/cycle at 100 psi Air Inlet ...1/4 in. NPT Weighted sound impulse power level...90.7 dBA Emission
  • Ridgid R250SFA | Owners Manual - Page 9
    FEATURES KNOW YOUR FINISH NAILER See Figure 1. Before attempting to use this product, familiarize marring and denting when using the tool on softer woods. OVERMOLD GRIP AND TRIGGER The overmold grip and trigger offer increased comfort and control of the tool. QUICK-CONNECT SWIVEL CONNECTOR The
  • Ridgid R250SFA | Owners Manual - Page 10
    call 1-866-539-1710 for assistance. PACKING LIST Straight Finish Nailer Case Oil Sample Fasteners Eye Protection Hex Keys (2.5 mm, 3 mm, and 4 mm) Fastener Guide Operator's Manual WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could
  • Ridgid R250SFA | Owners Manual - Page 11
    OPERATION WARNING: Always wear eye protection. Eye protection does not fit all operators in the same way. Make sure the eye protection chosen has side shields or provides protection from flying debris both from the front and sides. PREPARING THE TOOL FOR USE See Figure 2. Under normal use
  • Ridgid R250SFA | Owners Manual - Page 12
    OPERATION WARNING: Disconnect the tool from the air supply before leaving the work area, moving the tool to another location, or handing the tool to another person. Failure to do so could result in serious personal injury. CONNECTING THE TOOL TO AN AIR SUPPLY See Figure 5. DANGER: Do not use oxygen,
  • Ridgid R250SFA | Owners Manual - Page 13
    recommended for use with this tool (refer to the Fastener Guide). The use of any other nails can result in tool malfunction, leading to serious injuries. WARNING: Never load nails with the workpiece contact or trigger activated. Doing so could result in possible serious personal injury. BUTTON
  • Ridgid R250SFA | Owners Manual - Page 14
    the most accurate fastener placement. n Disconnect the tool from the air supply. n Depress the trigger lever pivot pin. n Rotate the selector to Position A. n Release the trigger lever pivot pin. WARNING: The nailer will not function properly if the selector is not securely seated in either position
  • Ridgid R250SFA | Owners Manual - Page 15
    on a scrap workpiece to determine the required depth for the application. To determine depth of drive, first adjust the air pressure and drive a test nail. To achieve the desired depth, use the drive depth adjustment on the tool. n Disconnect the tool from the air supply. n Turn the depth selector
  • Ridgid R250SFA | Owners Manual - Page 16
    the air supply before clearing a jammed fastener. Failure to do so could result in serious personal injury. CLEARING A JAMMED FASTENER See Figure 11. If a nail or fastener becomes jammed in the tool, disconnect the air hose and keep the tool pointed away from you while clearing the jam. n Remove
  • Ridgid R250SFA | Owners Manual - Page 17
    servicing use only identical RIDGID replacement parts. Use of any other parts ' operating valves and mechanisms tool problems for Kit ...079003001098 Oil and Wrench Kit ...079003001102 Overhaul Kit...079003001097 WARNING: Current attachments and accessories available for use with this tool are listed
  • Ridgid R250SFA | Owners Manual - Page 18
    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Air leak near the top of the tool or in the trigger area Loose screws Worn or damaged O-rings or seals SOLUTION Tighten screws Install Overhaul Kit Air leak near the bottom of the Loose screws Tighten screws tool Worn or damaged O-rings or bumper
  • Ridgid R250SFA | Owners Manual - Page 19
    -539-1710 or by logging on to the RIDGID® website at www.ridgid.com. When requesting warranty service, you must present the original dated sales receipt. The authorized service center will repair any faulty workmanship, and either repair or replace any part covered under the warranty, at our option
  • Ridgid R250SFA | Owners Manual - Page 20
    OPERATOR'S MANUAL STRAIGHT FINISH NAILER R250SFA Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
1
Your straight finish nailer has been engineered and manufactured to our high standards for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
STRAIGHT FINISH NAILER
R250SFA