Rocketfish RF-HTMT15 User Manual
Rocketfish RF-HTMT15 Manual
 |
View all Rocketfish RF-HTMT15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Rocketfish RF-HTMT15 manual content summary:
- Rocketfish RF-HTMT15 | User Manual - Page 1
TV WALL MOUNT RF-HTMT15 ASSEMBLY GUIDE Before using your new product, please read these instructions to prevent any damage. - Rocketfish RF-HTMT15 | User Manual - Page 2
-HTMT15 represents the state of the art in TV wall-mount design and is designed for reliable and trouble-free performance. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS CAUTION: Do not use this product for any purpose not explicitly specified by Rocketfish. • Improper installation may cause - Rocketfish RF-HTMT15 | User Manual - Page 3
wood stud or concrete walls (concrete anchors not included) • Overall dimensions (H × W × D): 16.4 x 18.1 x 2 in. (41.6 x 46.0 x 5 cm) • Wall-mount weight: 6 lbs. (2.7 kg) • For customer service, call: 1-800-620-2790 18.1" (46 cm) 16.4" (41.6 cm) Need help? Call 1-800-620-2790 (U.S. and Canada) 3 - Rocketfish RF-HTMT15 | User Manual - Page 4
Tools needed You will need the following tools to assemble your new TV wall mount: Edge-to-edge stud finder Measuring tape Pencil Level Drill Phillips screwdriver Socket wrench with 1/2" (13 mm) socket or adjustable wrench Hammer 7/32" (5.5 mm) wood drill bit for wood stud wall OR 3/8" (10 mm - Rocketfish RF-HTMT15 | User Manual - Page 5
RF-HTMT15 TV hardware bag Lbl Hardware Qty Lbl E M4 × 12 mm screw 4 N F M4 × 35 mm screw G M4 washer M6/M8 washer H 4O 4P 4Q 22 mm spacer I 4R J 5 mm spacer 4S K 2.5 mm spacer 4T L M6 × 12 mm screw 4 U M M6 × 20 mm 4 screw Hardware Qty 4 M6 × 35 mm screw M8 × 16 mm - Rocketfish RF-HTMT15 | User Manual - Page 6
Concrete Installation Kit CMK1 (not included) Contact customer service at 1-800-620-2790 to inquire about these additional parts. V 3 Concrete anchors (Fischer UX10 x 60R) Installation instructions STEP 1 - Determining whether your TV has a flat back or an irregular or obstructed back 1 - Rocketfish RF-HTMT15 | User Manual - Page 7
RF-HTMT15 • Irregularly-shaped back: There is a gap between the brackets and some part of the back of your TV. You will need spacers (I or J) when assembling the wall mount. 6 Remove the TV brackets (B and C). Need help? Call 1-800-620-2790 (U.S. and Canada) 7 - Rocketfish RF-HTMT15 | User Manual - Page 8
damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using - Rocketfish RF-HTMT15 | User Manual - Page 9
RF-HTMT15 STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back You'll need Screws Washers or or or E (4) L (4) or M (4) O (4) Phillips screwdriver P (4) Level (B and C) TV brackets G (4) or H (4) 1 Align the holes you noted on the TV brackets (B and C) with the - Rocketfish RF-HTMT15 | User Manual - Page 10
STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You'll need or F (4) Screws N (4) or R (4) or S (4) Phillips screwdriver Level Q (4) Washers or G (4) H (4) (B and C) TV I (4) K (4) Brackets J (4) 1 Align the TV brackets (B and C) with the - Rocketfish RF-HTMT15 | User Manual - Page 11
RF-HTMT15 STEP 4 - Determining wall-mount location You'll need Measuring tape Pencil Notes: • For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/heightfinder • Your TV should be high enough so your - Rocketfish RF-HTMT15 | User Manual - Page 12
STEP 5 - Option 1: Installing on a wood stud wall You'll need Lag bolt (U) (2) Lag bolt washer (T) (2) Level Edge-to edge Wall plate (A) stud finder Pencil Tape Template (D) Drill 1/2" socket wrench 7/32" wood drill bit Notes: • Drywall covering the wall must not exceed 5/8" (16 mm). • - Rocketfish RF-HTMT15 | User Manual - Page 13
RF-HTMT15 2 Align the wall plate template (D) at the height you determined in the previous step and make sure that it is level. Tape the wall plate template to the wall, then use a pencil to mark the lag bolt hole locations (2) on the stud center. Remove the wall plate template. Center pencil mark - Rocketfish RF-HTMT15 | User Manual - Page 14
4 Align the wall plate (A) with the pilot holes, insert the lag bolts (U) through the lag washers (T) and the holes in the wall plate, then tighten the lag bolts only until they are firm against the wall plate. CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts - Rocketfish RF-HTMT15 | User Manual - Page 15
RF-HTMT15 1 Align the wall plate template (D) at the height you determined in the previous step and make sure that it is level. Tape the wall plate template to the wall, then use a pencil to mark the lag bolt hole locations (3). Remove the wall plate template. 2 Drill pilot holes to a depth of 3 in. - Rocketfish RF-HTMT15 | User Manual - Page 16
(T) and the holes in the wall plate, then tighten the lag bolts only until they are firm against the wall plate. *Not included. Call Customer Service to inquire about the Fischer UX10 x 60R concrete anchor kit. CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts - Rocketfish RF-HTMT15 | User Manual - Page 17
RF-HTMT15 STEP 6 - Attaching your TV to the wall mount • Holding the TV with the top of the screen tilted toward the wall, slide the upper notches of the right and left TV brackets (B and C) over the upper lip of the wall plate (A). Then, gently lower the TV until the lock engages the lower lip of - Rocketfish RF-HTMT15 | User Manual - Page 18
Phillips screwdriver Level 1 Adjust the swivel tension knob by hand, then adjust the tilt angle by gripping the top and bottom of the TV and manually moving the TV to the angle you want. When you are done adjusting the tilt tension, re-tighten the knob, but do not over-tighten - Rocketfish RF-HTMT15 | User Manual - Page 19
the wall mount, then pull the bottom of the TV out from the wall and lift it up and off the wall plate. For customer service, call: 1-800-620-2790 (U.S. and Canada) Need help? Call 1-800-620-2790 (U.S. and Canada) 19 - Rocketfish RF-HTMT15 | User Manual - Page 20
become the property of Rocketfish and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you not cover? This warranty does not cover: • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage 20 Need help? - Rocketfish RF-HTMT15 | User Manual - Page 21
operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Rocketfish to service the Product • Products sold "as is" or "with all faults" • Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.) • Products - Rocketfish RF-HTMT15 | User Manual - Page 22
Part # 6907-302065 www.rocketfishproducts.com 1-800-620-2790 (U.S. and Canada) ROCKETFISH is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
TV WALL MOUNT
RF-HTMT15
ASSEMBLY GUIDE
Before using your new product, please read these instructions to prevent any damage.