Ryobi AC053N1BFHVNM Operation Manual

Ryobi AC053N1BFHVNM Manual

Get Ryobi AC053N1BFHVNM PDF manuals and user guides View all Ryobi AC053N1BFHVNM manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi AC053N1BFHVNM manual content summary:

  • Ryobi AC053N1BFHVNM | Operation Manual - Page 1
    , Black Nut, Black Line Guide, White Line Guide, 0.095 in. Line (16 ft.), Locking Pin, SPEED WINDER™, and Operator's Manual INSTALLING TRIMMER HEAD See Figures 1 - 6. The Bump Feed String Head installs differently on different string trimmer attachments. Assembly instructions will vary based on the
  • Ryobi AC053N1BFHVNM | Operation Manual - Page 2
    loading results and to help prevent line from tangling.  Push the bump knob down while pulling on line(s) to manually advance the line. CURVED SHAFT STRAIGHT SHAFT ARBOR SPACER UPPER HOUSING SPRING WHITE LINE GUIDE SPOOL BLACK BOLT KNOB LOWER HOUSING ARBOR SPACER UPPER HOUSING SPRING WHITE LINE
  • Ryobi AC053N1BFHVNM | Operation Manual - Page 3
    AC053N1BFH , écrou argentée, écrou noir, guide de ligne noir, guide de ligne blanc, 16 pi ligne instructions correspondant au style et au type de votre support de fixation. NOTE : Si vous ne parvenez pas à identifier le style et le type de support de fixation que vous avez, communiquez avec le service
  • Ryobi AC053N1BFHVNM | Operation Manual - Page 4
    section du boîtier supérieur et poussez dessus.  Installez le guide de ligne blanc dans la bobine. NOTE : Lors de l'installation, alignez les clavettes situ boîtier supérieur puis tournez la section du boîtier supérieur sur le support de fixation (voir la figure 6). Insérez le écrou argenté et tournez la
  • Ryobi AC053N1BFHVNM | Operation Manual - Page 5
    CABEZAL DE RECORTADORA DE HILO DE ALIMENTACIÓN POR GOLPE 3 EN 1 AC053N1BFH ADVERTENCIA: Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador de la recortadora de hilo antes de usar este accesorio. Siempre póngase protección ocular con la marca de cumplimiento
  • Ryobi AC053N1BFHVNM | Operation Manual - Page 6
    NOTA: El árbol perforará la etiqueta de la parte inferior de la carcasa inferior. Esto permite insertar el árbol en la unidad. AVISO: Asegúrese de que el árbol esté bien colocado en el compartimento hexagonal del separador antes de continuar. Si el árbol no está bien colocado, el armazón superior y
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
WARNING:
To reduce the risk of injury, user must read and understand the op-
erator’s manual for their string trimmer before using this accessory.
Always wear eye protection with side shields marked to comply
with Z87.1 along with hearing protection. Ensure compatibility and
proper fit before using this accessory. Stop the string trimmer and
remove battery pack or disconnect spark plug wire before changing
or adjusting accessories.
WARNING:
Do not use this accessory if a part is damaged or missing. If you are
not comfortable performing any of the functions described in these
instructions, take your unit to an authorized service center. Use of a
trimmer head that has been improperly assembled could cause the
trimmer head to come apart and/or detach from your trimmer and
result in serious personal injury and/or property damage.
PACKING LIST
See Figures 1 - 2.
Trimmer Head Assembly, Spacer, Silver Bolt, Black Bolt, Silver Nut, Black
Nut, Black Line Guide, White Line Guide, 0.095 in. Line (16 ft.), Locking
Pin, SPEED WINDER
™
, and Operator’s Manual
INSTALLING TRIMMER HEAD
See Figures 1 - 6.
The Bump Feed String Head installs differently on different string trimmer
attachments. Assembly instructions will vary based on the style and type
of attachment you have. See figures 3 and 4 to determine if you have a
curved shaft or straight shaft attachment and if your attachment comes
with or without an arbor. Refer to the
Installation Chart
to determine the
appropriate items for your attachment. Be sure to follow the instructions
for your attachment style and type.
NOTE:
If you cannot identify the style and type of attachment you have,
contact customer service for assistance.
Stop the engine or motor, disconnect the spark plug wire for gas power
heads, remove the battery pack for cordless power heads, or disconnect
the plug from the power source for electric power heads.
Remove the bump feed trimmer head housing by rotating the lower
housing counterclockwise so the arrow on the upper housing aligns with
the outside arrow on the bump feed housing.
NOTE:
The housing is spring loaded and will self eject when unlocked.
Separate the upper housing, spring, spool, knob, from lower housing
and set aside.
Locate the bolt or nut, line guide, and/or spacer required to install the
trimmer head to your attachment. Refer to the
Installation Chart
for
details.
INSTALLATION CHART
If the trimmer head does not fit with any of the adaptors or
hardware
supplied, contact Customer Service at 1-800-860-4050
for assistance.
Style
Type
Items Needed for Installation
Curved
Shaft
With
Arbor
Spacer, Upper Housing, Spring, White Line Guide,
Spool, Black Bolt, Knob, and Lower Housing
Curved
Shaft
Without
Arbor
Upper Housing, Silver Nut, Spring, Black Line
Guide, Spool, Knob, and Lower Housing
Straight
Shaft
With
Arbor
Spacer, Upper Housing, Spring, White Line Guide,
Spool, Silver Bolt, Knob, and Lower Housing
Straight
Shaft
Without
Arbor
Upper Housing, Black Nut, Spring, Black Line
Guide, Spool, Knob, and Lower Housing
BUMP FEED STRING HEAD
3-IN-1 READY
AC053N1BFH
Fig. 3
Fig. 4
Fig. 1
Fig. 2
STRAIGHT
SHAFT
UPPER
HOUSING
LOWER
HOUSING
SILVER
BOLT
SILVER
NUT
LOCKING
PIN
BLACK
NUT
BLACK
BOLT
BLACK
LINE GUIDE
WHITE
LINE GUIDE
CURVED
SHAFT
CURVED SHAFTS
STRAIGHT SHAFTS
ARBOR
ARBOR
SPRING
SPACER
SPOOL
KNOB
995000954
7-25-19 (REV:01)
SPEED
WINDER
™