Ryobi OP242 OP241_326_trilingual.pdf

Ryobi OP242 Manual

Get Ryobi OP242 PDF manuals and user guides View all Ryobi OP242 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi OP242 manual content summary:

  • Ryobi OP242 | OP241_326_trilingual.pdf - Page 1
    24 volt LITHIUM-ION battery pack OP241 Always mention the above model numbers when communicating with us regarding battery pack. Use battery pack for Ryobi 24 V cordless products only. Refer to the Operator's Manual provided with product. safety rules WARNING! Read and understand all instructions.
  • Ryobi OP242 | OP241_326_trilingual.pdf - Page 2
    power supply. For a complete list of approved power sources, refer to the operator's manual for the charger.  Press down on the battery pack to be sure contacts on the battery The lithium-ion battery pack can be used in temperatures down to -4°F. Put the battery pack on a tool and use the tool in
  • Ryobi OP242 | OP241_326_trilingual.pdf - Page 3
    . Si cet outil est prêté, il doit être accompagné de ces instructions, afin d'éviter un usage incorrect et d'éventuelles blessures. UTILISATION CARACTÉRISTIQUES RELATIVES À LA PROTECTION DES PileS Les piles au lithium-ion 24 V de Ryobi possèdent des caractéristiques visant à protéger les cellules au
  • Ryobi OP242 | OP241_326_trilingual.pdf - Page 4
    normales. Voir les instructions de charge normale battery pack to warm to a temperature of more than 0 °C (32° F) before attempting to recharge. UTILISATION PAR TEMPS FROID Le bloc-piles au lithium RYOBI est une marque déposée de RYOBI Limited et est utilisée en vertu d'une licence accordée par Ryobi
  • Ryobi OP242 | OP241_326_trilingual.pdf - Page 5
    modelo. Use el paquete de baterías 24 V solamente con productos inalámbricos Ryobi. Consulte el manual del operador suministrado con el producto. Siempre retire el paquete de baterías de la herramienta cuando esté ensamblando partes, realizando ajustes, limpiando o cuando ésta no esté en uso. Si
  • Ryobi OP242 | OP241_326_trilingual.pdf - Page 6
    baterías. consulte el manual del operador del cargador terminales con objetos metálicos y partes del cuerpo, ya que puede producirse RYOBI es una marca registrada de Ryobi Limited y se utiliza conforme a una licencia otorgada por Ryobi Limited. CÓMO CARGAR LA Batería CUANDO ESTÁ FRÍA If the battery
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
SAFETY RULES
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the
battery terminals together may cause sparks, burns, or a
fire.
Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning,
or when not in use.
Removing battery pack will prevent
accidental starting that could cause serious personal injury.
Always remove battery pack before storing the device.
When battery becomes fully charged, unplug the
charger from the power supply and remove the battery
pack from the charger.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing protec-
tion.
Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
Keep battery pack dry, clean, and free from oil and
grease.
Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean battery pack.
Save these instructions.
Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
Battery tools do not have to be plugged into an elec-
trical outlet; therefore, they are always in operating
condition. Be aware of possible hazards when not us-
ing your battery tool or when changing accessories.
Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.
Do not place battery tools or their batteries near fire
or heat.
This will reduce the risk of explosion and possibly
injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow.
A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source of
ignition, such as a pilot light.
To reduce the risk of seri-
ous personal injury, never use any cordless product in the
presence of open flame. An exploded battery can propel
debris and chemicals. If exposed, flush with water imme-
diately.
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
For use only with 24 V Li-Ion chargers
, see tool/
appliance/battery pack/charger correlation supplement
988000-446.
For best results, your battery tool should be charged
in a location where the temperature is more than 50°F
but less than 100°F.
To reduce the risk of serious personal
injury, do not store outside or in vehicles.
Under extreme usage or temperature conditions, bat-
tery leakage may occur. If liquid comes in contact with
your skin, wash immediately with soap and water. If
liquid gets into your eyes, flush them with clean water
for at least 10 minutes, then seek immediate medical
attention.
Following this rule will reduce the risk of serious
personal injury.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
24 VOLT LITHIUM-ION
BATTERY PACK
OP241
Always mention the above model numbers when
communicating with us regarding battery pack.
Use battery pack for Ryobi 24 V cordless products only. Refer
to the Operator’s Manual provided with product.
OPERATION
BATTERY PROTECTION FEATURES
Ryobi 24 V lithium-ion battery packs are designed with features
that protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
BATTERY FUEL GAUGE
See Figure 1
To display the amount of charge left in the battery, press the
charge level indicator button:
LED FUNCTIONS
CHARGE STATUS
0 - 10%
10 - 25%
25 - 50%
50 - 75%
75 - 100%
CHARGING THE BATTERY PACK
See Figure 1.
Battery packs are shipped in a low charge condition to
prevent possible problems. Therefore, you should charge
prior to first use.
If the charger does not charge the battery pack under normal
circumstances, return both the battery pack and charger to
your nearest Authorized Service Center for electrical check.