Samsung 320MP-3 User Manual

Samsung 320MP-3 Manual

Get Samsung 320MP-3 PDF manuals and user guides View all Samsung 320MP-3 manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 320MP-3 manual content summary:

  • Samsung 320MP-3 | User Manual - Page 1
    SyncMaster 320MX-3, 320MXN-3 320MP-3, 320MPN-3 LCD Display User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
  • Samsung 320MP-3 | User Manual - Page 2
    it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not
  • Samsung 320MP-3 | User Manual - Page 3
    Instructions Ensure power plug to a wall outlet that can be easily reached. • When a problem occurs with the product, you must unplug the power plug to cut the power the product. Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low
  • Samsung 320MP-3 | User Manual - Page 4
    Instructions DO floor. • Otherwise, this may result in damage to the screen display. Ensure that an authorized installation company installs the wall mount. • it. If the height of your monitor is adjustable, do not place any object or part of your body on the stand when lowering it. • This may
  • Samsung 320MP-3 | User Manual - Page 5
    Clean Others Safety Instructions When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, result in electric shock or fire. If the product needs to be repaired, contact a Service Center. If there is a strange smell or a strange sound or smoke is coming
  • Samsung 320MP-3 | User Manual - Page 6
    Safety Instructions Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. •
  • Samsung 320MP-3 | User Manual - Page 7
    Instructions product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot
  • Samsung 320MP-3 | User Manual - Page 8
    Instructions When or fire. If the product has been turned on for a long time, the display panel becomes hot. Do not touch it. Keep the small accessories in a careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers may
  • Samsung 320MP-3 | User Manual - Page 9
    Safety Instructions Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front
  • Samsung 320MP-3 | User Manual - Page 10
    later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items. Unpacking Manuals LCD Display Quick Setup Guide Cables Warranty Card (Not available in all locations) User's Guide Power Cord Others D-Sub Cable Remote Control Batteries (AAA X 2)
  • Samsung 320MP-3 | User Manual - Page 11
    available in all locations) Semi Stand KIT LAN Cable USB Cable (Applicable to the MXn-3, MPN-3 model only) RGB to BNC Cable RGB to COMPONENT Cable Network Box (Applicable to the MX-3,MP-3 model only) Wall Mount KIT RS232C Cable TV tuner box Your LCD Display The color and the appearance
  • Samsung 320MP-3 | User Manual - Page 12
    product. • To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. D.MENU button Off. Power button [ ] Use this button for turning the LCD Display on and off.
  • Samsung 320MP-3 | User Manual - Page 13
    described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the LCD Display. Note See the
  • Samsung 320MP-3 | User Manual - Page 14
    Connection Terminal (Input)) Connect the [RGB/DVI/DP/HDMI AUDIO IN] terminal of the monitor and the speaker output terminal of your computer's sound card using a stereo cable (sold separately). DP IN Receives a signal from the Display port. Connect a DP cable to [DP IN] on the product and DP IN on
  • Samsung 320MP-3 | User Manual - Page 15
    in damage to the product. HDMI IN 1 • Connect the [HDMI IN 1] terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.3 can be supported. Note • A normal external device (DVD player or camcorder, etc.) or a TV tuner box can be
  • Samsung 320MP-3 | User Manual - Page 16
    RJ 45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect the LAN cable to Control and select RJ45 MDC as the MDC Connection. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port Connect a serial cable (cross type) to [RS232C] on the product and RS232C
  • Samsung 320MP-3 | User Manual - Page 17
    display. 4. Lock the lock ( ). Note • These are general instructions. For exact instructions, see the User Manual supplied with the locking device. • You can purchase the locking device from an electronics store, an online shop, or our service Center. Note The power switches of both of the monitor
  • Samsung 320MP-3 | User Manual - Page 18
    during the OSD adjustment or to use MagicInfo. Press to change the channel. The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display. + VOL - Note This button can only be used in TV mode while a TV tuner box (sold separately) is connected. Adjusts the audio volume
  • Samsung 320MP-3 | User Manual - Page 19
    written information services via teletext. - Teletext Buttons MTS/DUAL Note This function does not work for this LCD Display. MTSYou can select MTS (Multichannel Television Stereo) mode. FM Stereo Audio Type Mono Stereo SAP MTS/S_Mode Mono Mono Stereo Mono SAP Default Manual Change Mono
  • Samsung 320MP-3 | User Manual - Page 20
    )] on the product. • To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. User Installation Guide Note • Be sure to call an installation expert of
  • Samsung 320MP-3 | User Manual - Page 21
    Introduction • The warranty becomes invalid if the product is installed by someone other than a professional authorized by Samsung Electronics. • A Samsung Electronics service center can provide details. Tilt Angle and Rotation 1 2 1. The product can be tilted up to 15 degrees from a vertical
  • Samsung 320MP-3 | User Manual - Page 22
    the product for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower. Note A Samsung Electronics service center can provide details. 3. Floor mount guide A : min. 50 mm B: Ambient temperature Measuring point < 20°C • When embedding the product in the floor
  • Samsung 320MP-3 | User Manual - Page 23
    Mechanical Layout (320MX-3, 320MP-3) Introduction (320MXN-3, 320MPN-3) Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards.
  • Samsung 320MP-3 | User Manual - Page 24
    order is placed, installation professionals will visit you and install the bracket. • At least 2 persons are needed in order to move the LCD Display. • SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions Notice For securing the
  • Samsung 320MP-3 | User Manual - Page 25
    Introduction Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is
  • Samsung 320MP-3 | User Manual - Page 26
    firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the
  • Samsung 320MP-3 | User Manual - Page 27
    between -2° and 15°. Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Remote Control (RS232C) Cable connections interface pin Bits rate Data Bits Parity Stop Bits Flow control Maximum length RS232C(9 pin) TxD(No.2) RxD(No.3) GND(No
  • Samsung 320MP-3 | User Manual - Page 28
    Introduction 8 Clear to Send 9 Ring Indicator • RS232C cable Connector : 9-pin D-Sub Cable : Cross (reversed) cable -P1- -P1- FEMALE Rx 2 Tx 3 Gnd 5 • Connecting method -P2- -P2- 3 Rx FEMALE 2 Tx 5 Gnd Control codes • Get control Header 0xAA command command type • Set
  • Samsung 320MP-3 | User Manual - Page 29
    commands. At the time, each product will follow commands but it will not respond with ACK. • Power Control • Function Personal Computer turns TV / Monitor power ON/OFF. • Get Power ON/OFF Status Header 0xAA command 0x11 DATA Length ID CheckSum 0 • Set Power ON/OFF Header command ID 0xAA
  • Samsung 320MP-3 | User Manual - Page 30
    Length ID CheckSum 0 • Set Volume Header command ID 0xAA 0x12 DATA Length 1 DATA Volume Volume : Volume value code to be set on TV / Monitor (0 ~ 100) CheckSum • Ack Header command ID 0xAA 0xFF Volume : Same as above DATA Length 3 Ack/Nak 'A' r-CMD 0x12 Val1 Volume Check Sum
  • Samsung 320MP-3 | User Manual - Page 31
    0 • Set Input Source Header command ID 0xAA 0x14 DATA Length 1 DATA CheckSum Input Source Input Source : Input Source code to be set on TV / Monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x1F 0x30 0x40 0x21 0x22 0x23 0x24 0x25 PC BNC DVI AV S-Video Component MagicInfo DVI_VIDEO RF(TV)
  • Samsung 320MP-3 | User Manual - Page 32
    : Error code that shows what occurred error is Val1 ERR Check Sum • Screen Mode Control • Function Personal Computer changes "Screen Mode" of TV/Monitor. Cannot be controlled when Video Wall is on. Caution Only works with models include TV. • Get Screen Mode Status Header 0xAA command 0x18
  • Samsung 320MP-3 | User Manual - Page 33
    code that shows what occurred error is Val1 ERR Check Sum • Screen Size Control • Function Personal Computer recognizes the screen size of TV / Monitor. • Get Screen Size Status Header 0xAA command 0x19 DATA Length ID CheckSum 0 • Ack Header 0xAA command 0xFF ID DATA Length Ack/Nak
  • Samsung 320MP-3 | User Manual - Page 34
    the PIP ON / OFF Header command ID 0xAA 0x3C DATA Length 1 DATA PIP PIP : The PIP ON / OFF code to set for the TV or Monitor 1 : PIP ON 0 : PIP OFF CheckSum • Ack Header command ID 0xAA 0xFF PIP : Same as above DATA Length 3 Ack/Nak 'A' r-CMD 0x3C Val1 PIP Check Sum
  • Samsung 320MP-3 | User Manual - Page 35
    shows what occurred error is Val1 ERR Check Sum • Video Wall Mode Control • Function Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is ON. Only works with TV / Monitor where Video Wall is on. Does not operate in MagicInfo • Get Video Wall Mode Header 0xAA command
  • Samsung 320MP-3 | User Manual - Page 36
    : Error code that shows what occurred error is Val1 ERR Check Sum • Safety Lock • Function Personal Computer turns Safety Lock function of TV / Monitor ON / OFF. Can operate regardless of whether power is ON / OFF. • Get Safety Lock Status Header 0xAA command 0x5D DATA Length ID CheckSum
  • Samsung 320MP-3 | User Manual - Page 37
    monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the back of your LCD Display to the [DVI IN] port on the back of your LCD Display and the DVI port on the computer. Using the D-sub
  • Samsung 320MP-3 | User Manual - Page 38
    the Audio cable for your LCD Display to the AUDIO port on the back of the LCD Display. Connect the power cord for your LCD Display to the POWER port on the back of the LCD Display. Turn on the power switch. Note Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting
  • Samsung 320MP-3 | User Manual - Page 39
    of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV /COMPONENT AUDIO IN (R-AUDIO-L)] on the LCD Display . 3. Press SOURCE on the product or remote control and select "AV". 4. Then, start the Camcorders with a tape inserted. Note The audio-video cables shown here are usually
  • Samsung 320MP-3 | User Manual - Page 40
    HDMI output port on a digital device. 2. Press SOURCE on the product or remote control and select "HDMI1 / HDMI2" Note In HDMI mode, only PCM format audio is supported. Connecting Using a DVI to HDMI Cable Connect a DVI-HDMI cable to [HDMI the [RGB/DVI/DP/HDMI AUDIO IN] terminal of the LCD Display.
  • Samsung 320MP-3 | User Manual - Page 41
    remote control and select "HDMI1 / HDMI2" Connecting a DVD Player Connect a RGB to Component cable between the [RGB/COMPONENT IN] port on the LCD Display (R-AUDIO-L)] on the LCD Display and the AUDIO OUT jacks on the DVD player. Note • Press SOURCE on the product or remote control and select "
  • Samsung 320MP-3 | User Manual - Page 42
    [AV/COMPONENT AUDIO IN (R-AUDIO-L)] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Press SOURCE on the product or remote control and select "Component". • For an explanation of Component video, see your Set Top Box owner's manual. Connecting to an Audio System 1. Connect a set
  • Samsung 320MP-3 | User Manual - Page 43
    Connections Connecting to MAGICINFO OUT Connect the [MAGICINFO OUT] terminal and the [HDMI IN 2 (MAGICINFO)] terminal on the product using the DP to HDMI cable. Note Applicable to the MXn-3, MPN-3 model only. Connecting a LAN Cable Connect the LAN cable between the [LAN] port on the product and the
  • Samsung 320MP-3 | User Manual - Page 44
    Connecting a USB devices Connections You can connect USB devices such as a mouse or keyboard. Note Applicable to the MXn-3, MPn-3 model only.
  • Samsung 320MP-3 | User Manual - Page 45
    the directions appropriate for the operating system you have. Prepare a blank disk and download the driver Program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows
  • Samsung 320MP-3 | User Manual - Page 46
    www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personal- ization". 3. Click "Personalization" and then "Display Settings
  • Samsung 320MP-3 | User Manual - Page 47
    If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the
  • Samsung 320MP-3 | User Manual - Page 48
    Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System
  • Samsung 320MP-3 | User Manual - Page 49
    . 2. Click "Start" "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver..." and select "Install from a list
  • Samsung 320MP-3 | User Manual - Page 50
    click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is certified by Microsoft, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button, then click the "OK
  • Samsung 320MP-3 | User Manual - Page 51
    Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk on the "Next" button. 6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver", then click "Next" and then
  • Samsung 320MP-3 | User Manual - Page 52
    " tab and click "Advanced Properties" button. 4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area. 6. Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location...", then click "Next" button. 8. Click the "Have
  • Samsung 320MP-3 | User Manual - Page 53
    have finished setting up your monitor. Execute X-Window after setting other re- quested hardware. MDC (Multiple Display Control) Installation 1. Insert "Yes." 5. The "Customer Information" window will appear. Register the user information and click "Yes." 6. The "Choose Destination Location" window
  • Samsung 320MP-3 | User Manual - Page 54
    quick MDC System execution icon will appear on the desktop. MDC execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MDC can be affected by such factors as the video card, motherboard and the
  • Samsung 320MP-3 | User Manual - Page 55
    of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the
  • Samsung 320MP-3 | User Manual - Page 56
    Selection. 12. Use Grid to view brief information on selected display. 13. Use Control Tools to control displays. 14. Switches the OSD function On/Off. - May not be supported depending on the product. The remote control Enable/Disable function operates whether or not the power is On/Off
  • Samsung 320MP-3 | User Manual - Page 57
    than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program as
  • Samsung 320MP-3 | User Manual - Page 58
    , the default value 10 will be restored.) 3) (Mute On/Off) - Turns on/off the Mute function of the selected display. When selecting one set at a time, turn on the Mute function for the selected set. The Mute function is disabled automatically when you adjust the
  • Samsung 320MP-3 | User Manual - Page 59
    the Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode OSD will be displayed to indicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to indicate when there is no signal. 4) MDC OSD - Sets whether the MDC OSD will
  • Samsung 320MP-3 | User Manual - Page 60
    . 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of the selected display to DVI. 4) TV - Changes the Input Source of the selected display to TV. 5) DTV - Changes the Input Source of the selected display to DTV. 6) AV - Changes the Input Source of
  • Samsung 320MP-3 | User Manual - Page 61
    to HDMI. 11) DP - Switches the input source for the selected Display to DP. 12) Channel - Channel arrow appears when the Input Source is TV. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. TV Source can be selected only in products with TV
  • Samsung 320MP-3 | User Manual - Page 62
    . 3) Switch Image Size of the selected display randomly. 4) The screen modes can only be adjusted when a TV (PAL only) is connected and the Image Size item is set to Auto Wide. HDMI2 may not be supported depending on the product. Custom may not be supported depending on the product. Auto Wide, Zoom1
  • Samsung 320MP-3 | User Manual - Page 63
    source of TV works only on TV model. Time Control is available only for the displays for which the power status is ON. Time Setting up Timer and Holiday Management 1. in minutes and as AM/PM for turning the selected monitor on. 2) Off Time - Sets the time in hours, in minutes and as AM/PM
  • Samsung 320MP-3 | User Manual - Page 64
    - Selects the external input source that will be displayed when the selected monitor is turned on. 5) Holiday - Applies the Holiday Management function to the Timer. 6) Repeat - Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual. z Once : The Timer goes off only once
  • Samsung 320MP-3 | User Manual - Page 65
    MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. PIP Size can be controlled with turning on the LCD Display power. PIP PIP Source 1. Click PIP of the main icons and the PIP control screen appears.
  • Samsung 320MP-3 | User Manual - Page 66
    PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC. 4) DVI - Changes the source of the PIP of the selected
  • Samsung 320MP-3 | User Manual - Page 67
    Basic information required to adjust the Picture is displayed in the main menu. Settings for the selected monitor will be displayed if one of the connected monitors is selected, and the default settings will be displayed if all monitors are selected by clicking All and Select. If a value is changed
  • Samsung 320MP-3 | User Manual - Page 68
    8) Color Temp - Adjusts the Color Temp for the selected display. 9) Brightness Sensor - Adjusts the Brightness Sensor for the selected display. 10) Dynamic Contrast - Adjusts the Dynamic Contrast for the selected display. DP may not be supported depending on the product. Brightness Sensor may not be
  • Samsung 320MP-3 | User Manual - Page 69
    appears. Basic information required to adjust Audio is displayed in the display window. Settings for the corresponding SET will be imported and displayed on the slider if a display ID is selected, and the default settings will be displayed if all display IDs are selected by clicking All and Select
  • Samsung 320MP-3 | User Manual - Page 70
    source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Settings Control is available only for the displays for which the power status is ON. Maintenance Lamp Control 1. Click on the "Maintenance" icon in the Main Icon column to
  • Samsung 320MP-3 | User Manual - Page 71
    Mode is selected in the Lamp Control menu. Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode is selected in the Lamp Control menu. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only
  • Samsung 320MP-3 | User Manual - Page 72
    finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time. The Interval item is used to set the repetition cycle in hour units and the Time item is used to set the
  • Samsung 320MP-3 | User Manual - Page 73
    repeated on each screen. 2) Video Wall Control - Video Wall properties can be configured. 1) On / Off - Turns on/off the Video Wall function of the selected display. 2) Format - The format can be selected to see a divided screen. z Full
  • Samsung 320MP-3 | User Manual - Page 74
    connected to the Com1 port - Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict. - For monitors that support a Set ID between 0 to 99, you have
  • Samsung 320MP-3 | User Manual - Page 75
    3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. If all sets are selected at the same time by clicking All and Select, the default value will be restored.
  • Samsung 320MP-3 | User Manual - Page 76
    MDC Unlike the previous method which used the serial data communication specifications RS-232C, an Ethernet function has been added. Connect the first display device and the PC by entering the IP address. To connect to another display device, use an RS-232C serial cable. Refer to the figure
  • Samsung 320MP-3 | User Manual - Page 77
    a Lamp adjustment mode. 7. Select a display from Display Selection. 8. All of the monitors can be selected or deselected. 9. Use Control Tools to control displays. 10. Switches the OSD function On/Off. - May not be supported depending on the product. The remote control Enable/Disable function
  • Samsung 320MP-3 | User Manual - Page 78
    to be connected and press the Add button to add the IP address. If you click the OK button, adding the monitor is completed. System 1. Click System in the main menu to open the system adjustment screen. Info Grid shows some basic information necessary to System. 1) (Power
  • Samsung 320MP-3 | User Manual - Page 79
    , the default value 10 will be restored.) 3) (Mute On/Off) - Turns on/off the Mute function of the selected display. When selecting one set at a time, turn on the Mute function for the selected set. The Mute function is disabled automatically when you adjust the
  • Samsung 320MP-3 | User Manual - Page 80
    the Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode OSD will be displayed to indicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to indicate when there is no signal. 4) MDC OSD - Sets whether the MDC OSD will
  • Samsung 320MP-3 | User Manual - Page 81
    IP Address, ID (Ethernet or Serial), Mac Address and connection status of the connected monitor is displayed. 3) It can automatically check whether DHCP IP is set and then set the IP address. 4) It can automatically or manually set and then apply the IP Address, Subnet and Gateway of the selected
  • Samsung 320MP-3 | User Manual - Page 82
    - Channel arrow appears when the Input Source is TV. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. The Input Source Control feature is available only for the displays whose power status is ON. TV Source can be selected only in products with
  • Samsung 320MP-3 | User Manual - Page 83
    MagicInfo model. The Input source of TV works only on TV model. Image Size Control is available only for the displays for which power status is ON. DP may not be supported depending on the product. Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI1, HDMI2, DTV 1. Click Image Size of the
  • Samsung 320MP-3 | User Manual - Page 84
    HDMI2 may not be supported depending on the product. Time 1. Click Time of the main icons and the Time Control screen appears. Info Grid shows some basic information necessary to Time Control. 1) Clock Set - Set the current time for the selected display (PC Time). - To change the current time, first
  • Samsung 320MP-3 | User Manual - Page 85
    - Selects the external input source that will be displayed when the selected monitor is turned on. 5) Holiday - Applies the Holiday Management function to the Timer. 6) Repeat - Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual. z Once : The Timer goes off only once
  • Samsung 320MP-3 | User Manual - Page 86
    and changes the size to Double 2. 7) Double 3 (Picture By Picture) - Turns on the PBP of the selected display and changes the size to Double 3. PIP Size can be controlled with turning on the LCD Display power. The Input source of TV works only on TV model. The Input source of MagicInfo works only
  • Samsung 320MP-3 | User Manual - Page 87
    the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display displays whose power status is ON and the PIP function is set to ON. HDMI2 may not be supported depending on the product. DP may not be supported
  • Samsung 320MP-3 | User Manual - Page 88
    appears. Basic information required to adjust the Picture is displayed in the main menu. Settings for the selected monitor will be displayed if one of the connected monitors is selected, and the default settings will be displayed if all monitors are selected by clicking All and Select. If a value
  • Samsung 320MP-3 | User Manual - Page 89
    Temp - Adjusts the Color Temp for the selected display. 9) Brightness Sensor - Adjusts the Brightness Sensor for the selected display. 10) Dynamic Contrast - Adjusts the Dynamic Contrast for the selected display. Brightness Sensor may not be supported depending on the product. The Input source of
  • Samsung 320MP-3 | User Manual - Page 90
    Select - Select either Main or Sub when PIP is On. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on
  • Samsung 320MP-3 | User Manual - Page 91
    . 5) Auto Adjustment - Self-Adjust to the incoming PC signal. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model.
  • Samsung 320MP-3 | User Manual - Page 92
    Mode is selected in the Lamp Control menu. Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode is selected in the Lamp Control menu. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only
  • Samsung 320MP-3 | User Manual - Page 93
    finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time. The Interval item is used to set the repetition cycle in hour units and the Time item is used to set the
  • Samsung 320MP-3 | User Manual - Page 94
    repeated on each screen. 2) Video Wall Control - Video Wall properties can be configured. 1) On / Off - Turns on/off the Video Wall function of the selected display. 2) Format - The format can be selected to see a divided screen. z Full
  • Samsung 320MP-3 | User Manual - Page 95
    status of the Ethernet cable. - Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict. - For monitors that support a Set ID between 0 to 99, you have
  • Samsung 320MP-3 | User Manual - Page 96
    the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. If all sets are selected at the same time by clicking All and Select, the default value
  • Samsung 320MP-3 | User Manual - Page 97
    install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. Source List Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC
  • Samsung 320MP-3 | User Manual - Page 98
    you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) Note • PIP turns off when the LCD Display is switched to an external source. • If you select , , in Size, Position and Transparency will not be activated. PIP Turns the PIP Screen Off/On
  • Samsung 320MP-3 | User Manual - Page 99
    Adjusting the LCD Display Note • PIP is disabled if the primary screen does not receive a signal. • A TV tuner box (sold separately) must be connected to use the TV. Size •
  • Samsung 320MP-3 | User Manual - Page 100
    • Low • Opaque Edit Name Adjusting the LCD Display Name the input device connected to the input Receiver / Game /Camcorder / DVD Combo / DHR / PC / DVI PC / DVI Devices Note • The displayed devices differ depending on the external input mode. • When connecting a PC to the HDMI terminal, set Edit
  • Samsung 320MP-3 | User Manual - Page 101
    Source AutoSwitch Adjusting the LCD Display When the Source AutoSwitch is On, the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary
  • Samsung 320MP-3 | User Manual - Page 102
    Adjusting the LCD Display Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product.
  • Samsung 320MP-3 | User Manual - Page 103
    Mode Adjusting the LCD Display Note Not available when Dynamic Contrast is set to On. 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3. Custom Custom By
  • Samsung 320MP-3 | User Manual - Page 104
    Adjusting the LCD Display Adjust the mid-range brightness (Gamma) for the picture. • Natural • Mode 1 Sets the picture brighter than Natural. • Mode 2 Sets the picture darker than Mode 1. • Mode 3
  • Samsung 320MP-3 | User Manual - Page 105
    Adjusting the LCD Display Color Control Adjusts individual Red, Green, Blue Color balance. Note Not available when Dynamic Contrast is set to On. 1. Red 2. Green 3. Blue Color Temp. Color
  • Samsung 320MP-3 | User Manual - Page 106
    Position Adjusting the LCD Display Adjusts the screen location horizontally and vertically. Auto Adjustment The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control
  • Samsung 320MP-3 | User Manual - Page 107
    2. G-Gain 3. B-Gain 4. R-Offset 5. G-Offset 6. B-Offset Size Adjusting the LCD Display The Size can be switched. 1. 16:9 2. 4:3 PIP Picture Adjusts the PIP Screen Settings. Note • Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness
  • Samsung 320MP-3 | User Manual - Page 108
    Adjusting the LCD Display Adjusts the Brightness of the PIP window on the screen. 3. HDMI. 5. Tint Adds a natural tone to the PIP window. Note The Tint slider is only displayed when PIP input source is HDMI or AV. Dynamic Contrast Dynamic Contrast automatically detects the distribution of the
  • Samsung 320MP-3 | User Manual - Page 109
    with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. Mode The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are
  • Samsung 320MP-3 | User Manual - Page 110
    Adjusting the LCD Display 2. Standard 3. Movie 4. Custom Custom By using the on-screen menus, the contrast and Adjusts the picture Sharpness. Tint Adjusts the picture Color. Adds a natural tone to the display. Note The Tint slider is only displayed when PIP input source is HDMI or AV. Color Tone
  • Samsung 320MP-3 | User Manual - Page 111
    Adjusting the LCD Display The Color tones can be changed. The individual Color components are also user adjustable. Note Not available when Dynamic Contrast is set to On. 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note • If you set the Color Tone to
  • Samsung 320MP-3 | User Manual - Page 112
    Changes the resolution to suit the user's preferences. Note • Certain external devices may feed the display an out of spec signal that may cause cutoff even Off 2. On Note Digital NR function is not available for all resolutions. HDMI Black Level When a DVD or set-top box is connected to your TV via
  • Samsung 320MP-3 | User Manual - Page 113
    Adjusting the LCD Display 2. Low Note For Timing which can be used for both the PC and the DTV in HDMI mode, HDMI Black Level will be activated. Film Mode Film Mode calibrates unnatural picture when watching a movie (24 frames) played on a TV (30 frames). Moving subtitles may appear
  • Samsung 320MP-3 | User Manual - Page 114
    Dynamic Contrast Adjusting the LCD Display Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Note This function is disabled when
  • Samsung 320MP-3 | User Manual - Page 115
    with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard
  • Samsung 320MP-3 | User Manual - Page 116
    Adjusting the LCD Display Emphasizes low frequency audio. Treble Emphasizes high frequency audio. Balance 2. On SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround
  • Samsung 320MP-3 | User Manual - Page 117
    Sound Select Adjusting the LCD Display Enable the sound of either the primary or secondary display in PIP mode. Note Available when PIP is set to On. 1. Main 2. Sub Speaker Select When you use the product with it connecting to a Home
  • Samsung 320MP-3 | User Manual - Page 118
    Adjusting the LCD Display • AV • Component • HDMI • MagicInfo • TV Note To watch TV on • To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. Language
  • Samsung 320MP-3 | User Manual - Page 119
    30 3. 60 4. 90 5. 120 6. 150 7. 180 Timer1 / Timer2 / Timer3 You can set the LCD display to automatically turn on or off at a specified time. Note • Only enabled when the clock is set using the Clock Set menu. • The Manual option allows you to select a day of the week. • Holiday : When choose Apply
  • Samsung 320MP-3 | User Manual - Page 120
    Adjusting the LCD Display You can register holidays. • Delete Selected You can delete selected holidays. Note • Only enabled when registered holidays are selected. • More than one holiday can be
  • Samsung 320MP-3 | User Manual - Page 121
    1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN Adjusting the LCD Display Lock The password can be changed. The preset password for the LCD Display is "0000". Note If you forgot your password, press the remote buttons INFO + EXIT + MUTE to reset the password to "0000." This is the
  • Samsung 320MP-3 | User Manual - Page 122
    Adjusting the LCD Display Video Wall A Video Wall is a set of video screens connected together, Disabled when PIP is set to On. Video Wall Turns Off/On the Video Wall function of the selected display Off/On. • Off • On Format The Format can be selected to see a divided screen. • Full Provides a
  • Samsung 320MP-3 | User Manual - Page 123
    Adjusting the LCD Display Sets how many parts the screen should be divided horizontally. mode. • The screen can be split into a maximum of 100 sub-screens. Note When more than four displays are connected, we recommend a resolution of XGA (1024*768) or greater to prevent any picture degradation.
  • Samsung 320MP-3 | User Manual - Page 124
    Adjusting the LCD Display Note This function is not available when the power is turned off. Pixel Shift Pixel Shift To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical direction. • Off • On Horizontal Sets how many pixels the
  • Samsung 320MP-3 | User Manual - Page 125
    Time Adjusting the LCD Display Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer Mode You can set the timer for Screen Burn Protection. If
  • Samsung 320MP-3 | User Manual - Page 126
    Period Adjusting the LCD Display Time Use this function to set the execution period for each mode set in the timer. Bar Within the set period of time specify a time for execution. This function prevents after-images on the screen by moving long black and white vertical lines. Eraser This
  • Samsung 320MP-3 | User Manual - Page 127
    Pixel Adjusting the LCD Display This function prevents after-images by moving many pixels on the screen. Side Gray Select the brightness of the grey for the screen background. • Off • Light • Dark Resolution Select When the picture is not displayed properly on the screen when setting the
  • Samsung 320MP-3 | User Manual - Page 128
    Adjusting the LCD Display 4. 1360 X 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x
  • Samsung 320MP-3 | User Manual - Page 129
    LCD Display Selects auto or manual for the fan speed settings. • Auto • Manual Fan Speed Setting Sets the fan speed within a range of 0 and 100. Note Enabled when Fan Control is set to Manual on ambient temperature of 40°C). Refer to "Specifications" herein for details about operating conditions.
  • Samsung 320MP-3 | User Manual - Page 130
    Adjusting the LCD Display Note • It is best to set Fan Control to Auto when you change the Temperature Control setting. Current Temperature the product will power on automatically as soon as it is connected to power. Button Lock Locks or unlocks the monitor control buttons on the product. • Off • On
  • Samsung 320MP-3 | User Manual - Page 131
    User Auto Color Adjusting the LCD Display 1. Auto Color Automatically adjusts the Colors. 2. Reset Resets the Color settings. Note Enabled only in PC mode. Standby Control Sets the standby mode, which will
  • Samsung 320MP-3 | User Manual - Page 132
    Lamp Schedule Adjusting the LCD Display Adjusts the luminance to a user-specified value at a specified time. OSD Display Displays or hides a menu item on the screen. Source OSD • Off • On Not Optimum Mode OSD • Off • On No Signal OSD
  • Samsung 320MP-3 | User Manual - Page 133
    • Off • On MDC OSD Adjusting the LCD Display • Off • On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an SW code. The image below will appear on the screen of the product. 2.
  • Samsung 320MP-3 | User Manual - Page 134
    Adjusting the LCD Display Note • This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The input resolution must be identical to the panel resolution.) • In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported if the Edit Name is set to
  • Samsung 320MP-3 | User Manual - Page 135
    Adjusting the LCD Display • To use MagicInfo with an MXN-3, MPN-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product. • To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect
  • Samsung 320MP-3 | User Manual - Page 136
    box specified by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAGICINFO)] on the product. Note • The remote control can be used . • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD
  • Samsung 320MP-3 | User Manual - Page 137
    Adjusting the LCD Display • For drive D:, EWF is not applied. • To save Setup contents that have been changed when EWF is in the Enable state, you must Commit them. •
  • Samsung 320MP-3 | User Manual - Page 138
    Adjusting the LCD Display 3. Select Language - step 3 When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device. 5. Setup Information
  • Samsung 320MP-3 | User Manual - Page 139
    Adjusting the LCD Display Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear.
  • Samsung 320MP-3 | User Manual - Page 140
    than 85Hz, you will see the black screen because the LCD Display does not support over 85Hz. Note Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD Display. Maintenance and Cleaning 1) Maintaining the LCD Display Case. Clean with a soft cloth after
  • Samsung 320MP-3 | User Manual - Page 141
    the LCD Display to become blank, have poor Coloring, become noisy, etc. In this case, first check the source of the problem, and then contact a Service Center to the MagicInfo Troubleshooting section. Problems related to the Installation Note Problems related to the LCD Display installation and their
  • Samsung 320MP-3 | User Manual - Page 142
    Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator
  • Samsung 320MP-3 | User Manual - Page 143
    Troubleshooting The LCD Display is using its power management system. Press any key on the key- board. Problems related to Audio Note Problems related to levels. Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed. Q: The remote control
  • Samsung 320MP-3 | User Manual - Page 144
    Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: How can I clean the outer case/LCD Panel? A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent
  • Samsung 320MP-3 | User Manual - Page 145
    Specifications General General Model Name 320MX-3, 320MP-3, 320MXN-3, 320MPN-3 LCD Panel Size Display Area 31.5 inches / 80 cm 697.68 mm(H) x 392.25 mm(V) Synchronization Horizontal Vertical 30~81 kHz 56~85 Hz Display Color 16.7M (true) Resolution Optimum resolution Maximum resolution 1366
  • Samsung 320MP-3 | User Manual - Page 146
    appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 3,147,264. Note Design and specifications are subject to change without prior notice
  • Samsung 320MP-3 | User Manual - Page 147
    Specifications PowerSaverd State Normal Op- Power sav- Power off eration ing mode Power Indicator 320MXN-3, 320MPN-3 On 177 Watts Power cator (With Network Box) Indi320MX-3, 320MP LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640
  • Samsung 320MP-3 | User Manual - Page 148
    Specifications Display Mode VESA, 848 x 480 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 , the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 320MP-3 | User Manual - Page 149
    seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without any problems. • For example, the number of TFT-LCD sub pixels contained in this product are 3,147,264. When cleaning the monitor and the panel outside, please apply a small
  • Samsung 320MP-3 | User Manual - Page 150
    Save Mode • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one Color or Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey)
  • Samsung 320MP-3 | User Manual - Page 151
    . - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use. • The best way to protect your monitor from Image retention is it may affect your warranty. Apply the Screen Pixel function on Product • Apply the Screen Pixel function - Symptom: Dot with Black Color move up and
  • Samsung 320MP-3 | User Manual - Page 152
    Information • Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display
  • Samsung 320MP-3 | User Manual - Page 153
    or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A CANADA MEXICO North America 1-800-SAMSUNG (726-7864) http://www.samsung.com 1-800-SAMSUNG (726-7864) http://www.samsung.com 01-800-SAMSUNG (726-7864) http://www.samsung.com ARGENTINA BRAZIL Latin
  • Samsung 320MP-3 | User Manual - Page 154
    SPAIN SWEDEN SWITZERLAND U.K 0700 SAMSUNG (0700 726 http://www.samsung.com 7864) 0800 - SAMSUNG (726-7864) http://www.samsung.com 902 - 1 - SAMSUNG (902 172 http://www.samsung.com 678) 0771 726 7864 (SAMSUNG) http://www.samsung.com 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08
  • Samsung 320MP-3 | User Manual - Page 155
    -327-527 1800-88-9999 1-800-10-SAMSUNG (726-7864) http://www.samsung.com http://www.samsung.com http://www.samsung.com 1-800-3-SAMSUNG (726-7864) 1-800-8-SAMSUNG (726-7864) 02-5805777 1800-SAMSUNG (726-7864) http://www.samsung.com 0800-329-999 http://www.samsung.com 1800-29-3232 http://www
  • Samsung 320MP-3 | User Manual - Page 156
    a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same Color is called the 'Dot Pitch'. Unit: mm The screen must be redrawn several times per second in order to create and display an image for the user
  • Samsung 320MP-3 | User Manual - Page 157
    battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product user replaceable. For information on its replacement, please contact your service provider. Authority Information in this document is subject to change without notice. © 2010 Samsung
  • Samsung 320MP-3 | User Manual - Page 158
    herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
SyncMaster 320MX-3, 320MXN-3
320MP-3, 320MPN-3
LCD Display
User Manual
The c
olor
and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.