Samsung 460TS-3 User Manual

Samsung 460TS-3 Manual

Get Samsung 460TS-3 PDF manuals and user guides View all Samsung 460TS-3 manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 460TS-3 manual content summary:

  • Samsung 460TS-3 | User Manual - Page 1
    SyncMaster 400TS-3, 460TS-3 LCD Display User Manuals The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
  • Samsung 460TS-3 | User Manual - Page 2
    screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. • Otherwise, this may result in electric shock or fire. Do not touch the power
  • Samsung 460TS-3 | User Manual - Page 3
    reached. • When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product. Be sure to contact an authorized Service Center when installing your monitor in a location with
  • Samsung 460TS-3 | User Manual - Page 4
    Instructions Keep heating appliances as far away from the power monitor is adjustable, do not place any object or part of your body on the stand when lowering it. • This may cause damage to the product or the person carrying it. When cleaning the monitor case or the surface of the TFT-LCD screen
  • Samsung 460TS-3 | User Manual - Page 5
    Instructions Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off. When cleaning the power plug pins or dusting the power the power plug immediately and contact a Service
  • Samsung 460TS-3 | User Manual - Page 6
    Safety Instructions If thunder or lightning is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage
  • Samsung 460TS-3 | User Manual - Page 7
    Safety Instructions To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for not use the product for a long period of time, disconnect the power cord from the power outlet. • Otherwise, this may result in overheating or fire due to
  • Samsung 460TS-3 | User Manual - Page 8
    Instructions there is a gas leak, do not touch the product or the power plug; ventilate immediately. • If a display panel becomes hot. Do not touch it. Keep the small accessories in a location out of the reach of children. Be careful when adjusting the angle of the product or the height of the stand
  • Samsung 460TS-3 | User Manual - Page 9
    in case you need to move the Product later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items. Unpacking LCD Display
  • Samsung 460TS-3 | User Manual - Page 10
    Manuals Introduction Quick Setup Guide Cables Warranty Card (Not available in all locations) User's Guide Power Cord Others D-Sub Cable USB Cable Remote Control (BP59-00138B) Sold separately Batteries (AAA X 2) (Not available in all locations) Semi Stand KIT LAN Cable RGB to BNC Cable
  • Samsung 460TS-3 | User Manual - Page 11
    that can be purchased with the product vary by country. Your LCD Display The color and the appearance may differ depending on the product, the screen, press the button to adjust volume. ENTER button [ENTER] Activates a highlighted menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode
  • Samsung 460TS-3 | User Manual - Page 12
    screen On / Off. Power button [ ] Use this button for turning the LCD Display on and off. Brightness Sensor Automatically detects the surrounding brightness. Power in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it
  • Samsung 460TS-3 | User Manual - Page 13
    ON [ I ] / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. TOUCH SCREEN USB HUB Connects to a network box (sold separately) or PC in order to use the touchscreen. To use the touchscreen, install the touchscreen driver. RGB/COMPONENT IN (PC
  • Samsung 460TS-3 | User Manual - Page 14
    ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT LCD Display to the HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.3 can be supported. Note To use MagicInfo, the network box specified separately by Samsung
  • Samsung 460TS-3 | User Manual - Page 15
    a network box, contact Samsung Electronics. RJ 45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port Connect a serial cable (cross type) information, refer to the User Manual supplied with the locking device
  • Samsung 460TS-3 | User Manual - Page 16
    are general instructions. For exact in- structions, see the User Manual supplied with the locking device. • You can purchase the locking device from an electronics store, an online shop, or our service Center. Connecting a Network Box (sold separately) RGB OUT MagicInfo video output port MAGICINFO
  • Samsung 460TS-3 | User Manual - Page 17
    the "Connections" section for details about cable connections. • The power switches of both of the monitor and the network box must be turned on for the network near the LCD Display, causing a malfunction due to interference with the frequency. POWER OFF Number Buttons DEL / GUIDE button + VOL
  • Samsung 460TS-3 | User Manual - Page 18
    EXIT MagicInfo POWER OFF Number Buttons DEL / GUIDE button Turns the product On. Turns the product Off. Used to enter the password during the OSD adjustment or to use MagicInfo. Press to change the channel. The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display
  • Samsung 460TS-3 | User Manual - Page 19
    services via teletext. - Teletext Buttons MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU Note This function does not work for this LCD Display. is connected. Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio comes back on if MUTE or - VOL +
  • Samsung 460TS-3 | User Manual - Page 20
    to the previous menu. EXIT Exits from the menu screen. MagicInfo MagicInfo Quick Launch Button. Note Enabled when a Network box is connected. User Installation Guide Note • Be sure to call an installation expert of Samsung Electronics to install the product. • The warranty becomes invalid
  • Samsung 460TS-3 | User Manual - Page 21
    or more behind the product for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower. Note A Samsung Electronics service center can provide details. 2. Embedded Mount guide A : min. 40 mm B : min. 70 mm C : min. 50 mm D : min. 50 mm E : Ambient
  • Samsung 460TS-3 | User Manual - Page 22
    there is a 50 mm space or more behind the product for ventilation, as shown above, and maintain the ambient temperature at 20°C or lower. Note A Samsung Electronics service center can provide details. Mechanical Layout (400TS-3)
  • Samsung 460TS-3 | User Manual - Page 23
    your order is placed, installation professionals will visit you and install the bracket. • At least 2 persons are needed in order to move the LCD Display. • SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions (400TS-3) (460TS-3)
  • Samsung 460TS-3 | User Manual - Page 24
    Introduction Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Accessories (sold separately) • Dimension with welcome board (400TS-3) (460TS-3)
  • Samsung 460TS-3 | User Manual - Page 25
    Introduction • Dimension with other accessories Wall Bracket Installation • Contact a technician for installing the wall bracket.
  • Samsung 460TS-3 | User Manual - Page 26
    Introduction • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is
  • Samsung 460TS-3 | User Manual - Page 27
    firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the
  • Samsung 460TS-3 | User Manual - Page 28
    Introduction Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Remote Control (RS232C) Cable connections interface pin Bits rate Data Bits Parity Stop Bits Flow control Maximum length RS232C(9 pin) TxD(No.2) RxD(No.3) GND(No.5) 9600 bps 8 bit
  • Samsung 460TS-3 | User Manual - Page 29
    DATA Length ID CheckSum 0xAA command type 0 • Set control Header command ID 0xAA command type • commanding words DATA Length 1 DATA Value CheckSum No. command type 1 Power control command 0x11 Value range 0~1
  • Samsung 460TS-3 | User Manual - Page 30
    every mechanism connected with Serial Cable regardless of its ID, set ID part to "0xFE" and send commands. At the time, each product will follow commands but it will not respond with ACK. • Power Control • Function Personal Computer turns TV / Monitor power ON/OFF. • Get Power ON/OFF Status
  • Samsung 460TS-3 | User Manual - Page 31
    /Nak 'A' r-CMD 0x11 Val1 Power Check Sum • Nak Header command ID 0xAA 0xFF DATA Length Ack/Nak r-CMD Val1 Check Sum 3 'N' 0x11 ERR ERR : Error code that shows what occurred error is • Volume Control • Function Personal Computer changes volume of TV / Monitor. • Get Volume Status
  • Samsung 460TS-3 | User Manual - Page 32
    DATA Input Source CheckSum Input Source : Input Source code to be set on TV / Monitor 0x14 0x1E 0x18 0x0C 0x04 0x08 0x20 0x1F 0x30 0x40 0x21 0x22 0x23 0x24 0x25 PC BNC DVI AV S-Video Component MagicInfo DVI_VIDEO RF(TV) DTV HDMI1 HDMI1_PC HDMI2 HDMI2_PC DisplayPort Caution DVI_VIDEO, HDMI1_PC
  • Samsung 460TS-3 | User Manual - Page 33
    ERR : Error code that shows what occurred error is • Screen Mode Control • Function Personal Computer changes "Screen Mode" of TV/Monitor. Cannot be controlled when Video Wall is on. Caution Only works with models include TV. • Get Screen Mode Status Header 0xAA command 0x18 DATA Length ID
  • Samsung 460TS-3 | User Manual - Page 34
    command 0x19 DATA Length ID CheckSum 0 • Ack Header command ID 0xAA 0xFF DATA Length Ack/Nak r-CMD 3 'A' 0x19 Val1 Screen Size Screen Size : Screen Size of TV / Monitor (Range : 0 ~ 255, Unit : Inch) Check Sum • Nak Header command ID 0xAA 0xFF DATA Length Ack/Nak r-CMD Val1
  • Samsung 460TS-3 | User Manual - Page 35
    0x3C DATA Length 1 PIP : The PIP ON / OFF code to set for the TV or Monitor 1 : PIP ON 0 : PIP OFF DATA PIP CheckSum • Ack Header command ID 0xAA 0xFF PC, BNC Only) • Function Personal Computer controls PC system screen automatically. • Get Auto Adjustment Status None • Set Auto Adjustment
  • Samsung 460TS-3 | User Manual - Page 36
    code that shows what occurred error is • Video Wall Mode Control • Function Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is ON. Only works with TV / Monitor where Video Wall is on. Does not operate in MagicInfo • Get Video Wall Mode Header 0xAA command 0x5C DATA
  • Samsung 460TS-3 | User Manual - Page 37
    : Error code that shows what occurred error is • Safety Lock • Function Personal Computer turns Safety Lock function of TV / Monitor ON / OFF. Can operate regardless of whether power is ON / OFF. • Get Safety Lock Status Header 0xAA command 0x5D DATA Length ID CheckSum 0 • Set Safety Lock
  • Samsung 460TS-3 | User Manual - Page 38
    There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer. Using
  • Samsung 460TS-3 | User Manual - Page 39
    the LCD Display. Turn on the power switch. Note Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to a PC to Use the TOUCH SCREEN To use the touch screen function, connect both the D-Sub (or HDMI or HDMI - DVI) cable and USB cable, install the touch screen driver
  • Samsung 460TS-3 | User Manual - Page 40
    Connections • When the graphics card supports DVI (digital) output (via a DVI cable) • Connect the [DVI IN] port of the product to the DVI port on your PC using the DVI cable. • Connect the [TOUCH SCREEN USB HUB] port of the product to the USB port on your PC using the USB cable. • When the graphics
  • Samsung 460TS-3 | User Manual - Page 41
    HDMI to DVI cable. • Connect the [TOUCH SCREEN USB HUB] port of the product to the USB port on your PC using the USB cable. Note • The multi-touch function is not compatible with Windows Vista 64 bit or Windows 7. • With innovative, highly sensitive touchscreen technology, you don't need to use much
  • Samsung 460TS-3 | User Manual - Page 42
    any problem with the touch screen function or sound output after a USB device is connected, reconnect the USB cable or change the connection port. Connecting to Other devices Note • AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display
  • Samsung 460TS-3 | User Manual - Page 43
    jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Display . 2. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV /COMPONENT
  • Samsung 460TS-3 | User Manual - Page 44
    remote control and select "HDMI1 / HDMI2" Note In HDMI mode, only PCM format audio is supported. Connecting Using a DVI to HDMI Cable Connect a DVI-HDMI cable to [HDMI IN 2 (MAGICINFO IN] terminal of the LCD Display. 3. Press SOURCE on the product or remote control and select "HDMI1 / HDMI2"
  • Samsung 460TS-3 | User Manual - Page 45
    Box. Connect a set of audio cables between the [AV/COMPONENT AUDIO IN [RAUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Press SOURCE on the product or remote control and select "Component". • For an explanation of Component video, see your Set Top Box owner's manual.
  • Samsung 460TS-3 | User Manual - Page 46
    AUDIO SYSTEM and [AUDIO OUT] on LCD Display. Connecting a Network Box (sold separately) Note • Network boxes are sold separately. • For more information on how to purchase and install a network box, contact Samsung Electronics. Connecting the Power Connect the [POWER] terminal of the product and the
  • Samsung 460TS-3 | User Manual - Page 47
    Connections Connecting to MAGICINFO OUT Connect the [MAGICINFO OUT] terminal of the network box and the [HDMI IN 2 (MAGICINFO)] terminal of the monitor using the DP to HDMI cable. Connecting a LAN Cable Connect the LAN cable between the [LAN] port on the product and the [LAN] port on your PC.
  • Samsung 460TS-3 | User Manual - Page 48
    box to Use the TOUCH SCREEN 1. Connect the [TOUCH SCREEN USB HUB] port of the product to the USB port on your PC using the USB cable. Note • With innovative, highly sensitive touchscreen technology, you don't need to use much force when touching the screen. • Touching the screen with a rough stick
  • Samsung 460TS-3 | User Manual - Page 49
    Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver http://www.samsung.com/ Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click "Windows". 3. Choose your monitor model in
  • Samsung 460TS-3 | User Manual - Page 50
    Using the Software Note This monitor driver is certified by Microsoft, and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™, Operating System 1. Insert
  • Samsung 460TS-3 | User Manual - Page 51
    under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
  • Samsung 460TS-3 | User Manual - Page 52
    Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System
  • Samsung 460TS-3 | User Manual - Page 53
    Using the Software 1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5.
  • Samsung 460TS-3 | User Manual - Page 54
    click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is certified by Microsoft, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button, then click the "OK
  • Samsung 460TS-3 | User Manual - Page 55
    button. 6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver", then click "Next" and then click "Have disk". 7. Click the "Browse" button, then choose A:(D:\Driver). 8. Click the "Open" button, then click "OK" button. 9. Choose your monitor model and
  • Samsung 460TS-3 | User Manual - Page 56
    Software 4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area. 6. Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location...", then click "Next" button. 8. Click the "Have Disk" button. 9. Specify A:\(D:\driver
  • Samsung 460TS-3 | User Manual - Page 57
    installation will start automatically. (Double-click on the file in the "Touchscreen Driver" folder.) 4. Complete the remaining installation steps according to the instructions displayed on the screen. Note At this point, the driver has been installed and the system will automatically retrieve the
  • Samsung 460TS-3 | User Manual - Page 58
    Using the Software FIG. (3) FIG. (4) Touchscreen Control PanelInstalling the Driver Double-click the shortcut on the desktop, or go to "Start" -> "All Programs" -> "IRTouchSystems" > "TouchScreen Control Panel" (FIG. 5) then open the Control Panel for the touchscreen. FIG. (5)
  • Samsung 460TS-3 | User Manual - Page 59
    or configurations using a USB connection and supports multiple touchscreens connected to the same PC. The panel provides basic information for the touchscreen and allows for calibration. If several touchscreens are mounted on the PC and the status is set to "multi-screens display," then more than
  • Samsung 460TS-3 | User Manual - Page 60
    Enable Right Click 6. Enable Drag Delay 7. Enable Delay Touch 8. Enable Beep FIG. (7) Modes There are three touch modes : "Click on touch," "Click on Release," "Mouse Emulation." 1. Click on touch A click is recognized when your finger contacts the touchscreen. Note that you cannot drag objects. The
  • Samsung 460TS-3 | User Manual - Page 61
    the more sensitive the touchscreen is to double clicks. Double-click is supported by the "Click on touch," "Click on touch surface within an error limit (in pixels). The higher the value, the wider the jitter-range. The context menu will remain displayed as long as your finger presses the screen
  • Samsung 460TS-3 | User Manual - Page 62
    " -> "Add or Remove Programs" (FIG. 8), select "IRTOUCHSYSTEMS TouchScreen Driver", and click on "Remove" to uninstall the driver. FIG. (8) General touchscreen settings(For reference) Select "Mouse Emulation" mode, and then choose "Enable Touch," "Send Right Click," and "Enable Double Click." For
  • Samsung 460TS-3 | User Manual - Page 63
    selected or if the cursor jitters when you touch the touchscreen. MDC (Multiple Display Control) Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MDC System installation Program. Note If the screen for installing the software does not appear, install it using the MDC
  • Samsung 460TS-3 | User Manual - Page 64
    Using the Software 8. The installation progress screen will appear. 9. The "InstallShield Wizard Complete" screen will appear. monitor. If that happens, press F5 Key. Installation Problems The installation of MDC can be affected by such factors as the video button. Using Serial MDC Using Ethernet MDC
  • Samsung 460TS-3 | User Manual - Page 65
    communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume
  • Samsung 460TS-3 | User Manual - Page 66
    searches for monitors. The maximum number is indicated in the Max LFD Id field. 11. Select a display from Display Selection. 12. Use Grid to view brief information on selected display. 13. Use Control Tools to control displays. 14. Switches the OSD function On/Off. - May not be supported depending
  • Samsung 460TS-3 | User Manual - Page 67
    than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program as well
  • Samsung 460TS-3 | User Manual - Page 68
    return to the default settings when you undo the selections or choose "Select All".) The Volume Control and Mute features are available only for the displays whose power status is ON. 3. Selects whether to display the menu screen using the OSD
  • Samsung 460TS-3 | User Manual - Page 69
    the Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode OSD will be displayed to indicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to indicate when there is no signal. 4) MDC OSD - Sets whether the MDC OSD will
  • Samsung 460TS-3 | User Manual - Page 70
    . 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of the selected display to DVI. 4) TV - Changes the Input Source of the selected display to TV. 5) DTV - Changes the Input Source of the selected display to DTV. 6) AV - Changes the Input Source of
  • Samsung 460TS-3 | User Manual - Page 71
    the displays whose power status is ON. Image Size PC, BNC, DVI, DP 1. Click Image Size of the main icons and the Image Size control screen main menu to display the PC, BNC, DVI and DP tabs. - The Image Size Control button controls Image Size available for PC, BNC, DVI and DP. 5) Video Source - Using
  • Samsung 460TS-3 | User Manual - Page 72
    Control is available only for the displays for which power status is ON. Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI1, displays only the display having TV, AV, S-Video, Component, HDMI1, HDMI2 or DTV as input source. 3) Switch Image Size of the selected display randomly. 4) The screen
  • Samsung 460TS-3 | User Manual - Page 73
    works only on TV model. Time Control is available only for the displays for which the power status is ON. Time Setting up Timer and Holiday Management 1. 1. turning the selected monitor on. 2) Off Time - Sets the time in hours, in minutes and as AM/PM for turning the selected monitor off. 3) Volume
  • Samsung 460TS-3 | User Manual - Page 74
    - Selects the external input source that will be displayed when the selected monitor is turned on. 5) Holiday - Applies the Holiday Management function to the Timer. 6) Repeat - Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual. z Once : The Timer goes off only once
  • Samsung 460TS-3 | User Manual - Page 75
    selected display and changes the size to Double 3. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. PIP Size can be controlled with turning on the LCD Display power. PIP PIP Source 1. Click PIP of the main icons and the PIP control screen
  • Samsung 460TS-3 | User Manual - Page 76
    not be supported depending on the product. Some of the PIP Sources may not be available for selection, depending on the input source type of the Main Screen. The Input source of MagicInfo works only on MagicInfo model. The PIP Control feature is available only for the displays whose power status is
  • Samsung 460TS-3 | User Manual - Page 77
    , and the default settings will be displayed if all monitors are selected by clicking All and Select. If a value is changed in this screen, the current mode will automatically switch to custom mode. 1) Picture - Available only for TV, AV, S-Video, Component, HDMI1, HDMI2, DTV. 2) Contrast - Adjusts
  • Samsung 460TS-3 | User Manual - Page 78
    may not be supported depending on the product. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Color Temp is only enabled if the Color Tone is set to Off. This feature is available only for the displays whose power status is
  • Samsung 460TS-3 | User Manual - Page 79
    screen appears. Basic information required to adjust Audio is displayed in the display window. Settings for the corresponding SET will be imported and displayed on the slider if a display for the displays whose power status is ON and if no selection is made, the factory default is displayed. Settings
  • Samsung 460TS-3 | User Manual - Page 80
    Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display. 5) Auto Adjustment - Settings Control is available only for the displays for which the power status is ON. Maintenance Lamp Control 1. Click on the "Maintenance
  • Samsung 460TS-3 | User Manual - Page 81
    Mode is selected in the Lamp Control menu. Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode is selected in the Lamp Control menu. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only on
  • Samsung 460TS-3 | User Manual - Page 82
    screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor the displays whose power status is ON. Maintenance Video Wall 1. Click on the "Maintenance" icon in
  • Samsung 460TS-3 | User Manual - Page 83
    connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall Control - Video Wall properties can be configured. 1) On / Off - Turns on/off the Video Wall function of the selected display. 2) Format - The format can be
  • Samsung 460TS-3 | User Manual - Page 84
    into. You can select a number of screens with a different layout when dividing. z Select a mode from Screen divider. z Select a display from Display Selection. z The place will be set up by pressing a number in the selected mode. z The maximum number of monitors that can be arranged: Horizontal
  • Samsung 460TS-3 | User Manual - Page 85
    3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. If all sets are selected at the same time by clicking All and Select, the default value will be restored.
  • Samsung 460TS-3 | User Manual - Page 86
    , an Ethernet function has been added. Connect the first display device and the PC by entering the IP address. To connect to another display device, use an RS-232C serial cable. Refer to the figure above. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to
  • Samsung 460TS-3 | User Manual - Page 87
    Selection. 8. All of the monitors can be selected or deselected. 9. Use Control Tools to control displays. 10. Switches the OSD function On/Off. - May not be supported depending on the product. The remote control Enable/Disable function operates whether or not the power is On/Off, and this
  • Samsung 460TS-3 | User Manual - Page 88
    Add button to add the IP address. If you click the OK button, adding the monitor is completed. System 1. Click System in the main menu to open the system adjustment screen. Info Grid shows some basic information necessary to System. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer
  • Samsung 460TS-3 | User Manual - Page 89
    return to the default settings when you undo the selections or choose "Select All".) The Volume Control and Mute features are available only for the displays whose power status is ON. 3. Selects whether to display the menu screen using the OSD
  • Samsung 460TS-3 | User Manual - Page 90
    the Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode OSD will be displayed to indicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to indicate when there is no signal. 4) MDC OSD - Sets whether the MDC OSD will
  • Samsung 460TS-3 | User Manual - Page 91
    Ethernet or Serial), Mac Address and connection status of the connected monitor is displayed. 3) manually set and then apply the IP Address, Subnet and Gateway of the selected monitor. Input Source 1) Click Input Source of the main icons and the Input Source control screen appears. Selects displays
  • Samsung 460TS-3 | User Manual - Page 92
    - Channel arrow appears when the Input Source is TV. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. The Input Source Control feature is available only for the displays whose power status is ON. TV Source can be selected only in products with TV
  • Samsung 460TS-3 | User Manual - Page 93
    for the displays for which power status is ON. DP may not be supported depending on the product. Image Size TV, AV, S-Video, Component displays only the display having TV, AV, S-Video, Component, HDMI1, HDMI2 or DTV as input source. 3) Switch Image Size of the selected display randomly. 4) The screen
  • Samsung 460TS-3 | User Manual - Page 94
    supported depending on the product. Time 1. Click Time of the main icons and the Time Control screen appears. Info Grid shows some basic information necessary to Time Control. 1) Clock Set - Set the current time for the selected display displays for which the power status is ON. Time Setting
  • Samsung 460TS-3 | User Manual - Page 95
    - Selects the external input source that will be displayed when the selected monitor is turned on. 5) Holiday - Applies the Holiday Management function to the Timer. 6) Repeat - Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual. z Once : The Timer goes off only once
  • Samsung 460TS-3 | User Manual - Page 96
    and changes the size to Double 2. 7) Double 3 (Picture By Picture) - Turns on the PBP of the selected display and changes the size to Double 3. PIP Size can be controlled with turning on the LCD Display power. The Input source of TV works only on TV model. The Input source of MagicInfo works only on
  • Samsung 460TS-3 | User Manual - Page 97
    , depending on the input source type of the Main Screen. The PIP Control feature is available only for the displays whose power status is ON and the PIP function is set to ON. HDMI2 may not be supported depending on the product. DP may not be supported depending on the product. The Input source of
  • Samsung 460TS-3 | User Manual - Page 98
    , and the default settings will be displayed if all monitors are selected by clicking All and Select. If a value is changed in this screen, the current mode will automatically switch to custom mode. 1) Picture - Available only for TV, AV, S-Video, Component, HDMI1, HDMI2, DTV. 2) Contrast - Adjusts
  • Samsung 460TS-3 | User Manual - Page 99
    works only on TV model. Color Temp is only enabled if the Color Tone is set to Off. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed DP may not be supported depending on the product.
  • Samsung 460TS-3 | User Manual - Page 100
    screen appears. Basic information required to adjust Audio is displayed in the display window. Settings for the corresponding SET will be imported and displayed on the slider if a display for the displays whose power status is ON and if no selection is made, the factory default is displayed. The
  • Samsung 460TS-3 | User Manual - Page 101
    . 5) Auto Adjustment - Self-Adjust to the incoming PC signal. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Maintenance Lamp
  • Samsung 460TS-3 | User Manual - Page 102
    Mode is selected in the Lamp Control menu. Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode is selected in the Lamp Control menu. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicInfo works only on
  • Samsung 460TS-3 | User Manual - Page 103
    screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor Control feature is available only for the displays whose power status is ON. The Input source of
  • Samsung 460TS-3 | User Manual - Page 104
    connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall Control - Video Wall properties can be configured. 1) On / Off - Turns on/off the Video Wall function of the selected display. 2) Format - The format can be
  • Samsung 460TS-3 | User Manual - Page 105
    into. You can select a number of screens with a different layout when dividing. z Select a mode from Screen divider. z Select a display from Display Selection. z The place will be set up by pressing a number in the selected mode. z The maximum number of monitors that can be arranged: Horizontal
  • Samsung 460TS-3 | User Manual - Page 106
    the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. If all sets are selected at the same time by clicking All and Select, the default value
  • Samsung 460TS-3 | User Manual - Page 107
    must be connected to use the TV. Source List Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5. HDMI1 - This is deactivated when a TV tuner box is installed. 6. HDMI2 - This is deactivated
  • Samsung 460TS-3 | User Manual - Page 108
    devices in a small window super-imposed on the PC Video signal. (Off/ On) Note • PIP turns off when the LCD Display is switched to an external source. • If you select , , in Size, Position and Transparency will not be activated. PIP Turns the PIP Screen Off/On. • Off • On Source Selects the input
  • Samsung 460TS-3 | User Manual - Page 109
    Adjusting the LCD Display Size • PC : DVI, AV, HDMI1, HDMI2, DisplayPort • DVI : PC • AV : PC • HDMI : PC • DisplayPort : PC Changes the Size of the PIP window. Position Changes the
  • Samsung 460TS-3 | User Manual - Page 110
    connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC. • When an AV device is connected, set Edit AutoSwitch selection is On, and or the Primary Source Recovery is On, the display power saving mode becomes inactive. • When Primary Source Recovery is On, only the Primary
  • Samsung 460TS-3 | User Manual - Page 111
    Source AutoSwitch Adjusting the LCD Display When the Source AutoSwitch is On, the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary source selection will become active, if
  • Samsung 460TS-3 | User Manual - Page 112
    Adjusting the LCD Display Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source for the automatic input source. Picture [PC / DVI / DisplayPort / MagicInfo Mode] • If connected to a PC, set Edit Name to DVI PC, and enjoy video or audio content saved on the
  • Samsung 460TS-3 | User Manual - Page 113
    Adjusting the LCD Display 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3. Custom Custom By using the on-screen menus, the contrast and brightness can be
  • Samsung 460TS-3 | User Manual - Page 114
    Color Tone Adjusting the LCD Display Note Not available when Dynamic Contrast is set to On. The Color tones can be changed. 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note • If you set
  • Samsung 460TS-3 | User Manual - Page 115
    Adjusting the LCD Display Color Temp. is a measure of the 'warmth' of the image Colors. in PC mode only. Coarse Fine Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the Center using the horizontal control menu. Removes noise such
  • Samsung 460TS-3 | User Manual - Page 116
    Adjusting the LCD Display Note • Not available when Dynamic Contrast is set to On. • Available in PC mode only. Signal Balance Selects either On or Off with the signal
  • Samsung 460TS-3 | User Manual - Page 117
    Adjusting the LCD Display The Size can be switched. 1. 16:9 2. 4:3 PIP Picture Adjusts the PIP Screen Settings. Note • Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts
  • Samsung 460TS-3 | User Manual - Page 118
    Adjusting the LCD Display Note The Tint slider is only displayed when PIP input source is HDMI or AV. Dynamic Contrast Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an
  • Samsung 460TS-3 | User Manual - Page 119
    Adjusting the LCD Display Reset the screen settings. Picture [ AV / HDMI / TV / Component Mode] Available Modes • PC / DVI A TV tuner box (sold separately) must be connected to use the TV. The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are
  • Samsung 460TS-3 | User Manual - Page 120
    Adjusts the picture Color. Adds a natural tone to the display. Note The tint slider is only displayed when input source is HDMI, Component or AV. Color Tone The Color tones can be changed. The individual Color components are also user adjustable. Note Not available when Dynamic Contrast is set to
  • Samsung 460TS-3 | User Manual - Page 121
    LCD Display ]): 16:9 - 4:3 Video mode (HDMI [Video Timing], AV or Component): 16:9 - Zoom1 - Zoom2 - 4:3 - Screen Fit - Custom 1. 16 user's preferences. Note • Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature. • Screen
  • Samsung 460TS-3 | User Manual - Page 122
    Adjusting the LCD Display • Zoom 1 and Zoom 2 are disabled for HD signals (1080i/p, 720p or 768p). a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the
  • Samsung 460TS-3 | User Manual - Page 123
    Film Mode Adjusting the LCD Display Film Mode calibrates unnatural pictures that may occur in a movie (which is in is not available in progressive scan.) 1. Off 2. On PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the
  • Samsung 460TS-3 | User Manual - Page 124
    Adjusting the LCD Display Dynamic Contrast automatically detects the distribution of the visual signal and adjusts brightness can automatically be adjusted. 1. Off 2. On Picture Reset Reset the screen settings. Sound Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI
  • Samsung 460TS-3 | User Manual - Page 125
    tuner box (sold separately) must be connected to use the TV. The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4.
  • Samsung 460TS-3 | User Manual - Page 126
    the LCD Display Emphasizes high frequency audio. Balance Allows you to Adjusts the sound balance between the left and right speakers. Auto Volume Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of
  • Samsung 460TS-3 | User Manual - Page 127
    Adjusting the LCD Display Note Available when PIP is set to On. 1. Main 2. Sub Speaker Select When you use the product with it connecting to a Home Theater, turn the
  • Samsung 460TS-3 | User Manual - Page 128
    Adjusting the LCD Display Note • MagicInfo can only be enabled when a network box(sold separately) is . Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set, Sleep Timer, Timer1
  • Samsung 460TS-3 | User Manual - Page 129
    4. 90 5. 120 6. 150 7. 180 Timer1 / Timer2 / Timer3 Adjusting the LCD Display You can set the LCD display to automatically turn on or off at a specified time. Note • Only enabled when the clock is set using the Clock Set menu. • The Manual option allows you to select a day of the week. • Holiday
  • Samsung 460TS-3 | User Manual - Page 130
    Adjusting the LCD Display You can delete selected holidays. Note • Only enabled when registered holidays are selected. • More than one holiday can be selected . 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN The password can be changed. The preset password for the LCD Display is "0000".
  • Samsung 460TS-3 | User Manual - Page 131
    Adjusting the LCD Display Lock Note If you forgot your password, press the remote buttons INFO + This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of
  • Samsung 460TS-3 | User Manual - Page 132
    Adjusting the LCD Display Turns Off/On the Video Wall function of the selected display Off/On. • Off • On Format The Format can be selected to see a divided screen. • Full Provides a full screen without any margins. • Natural Displays a natural image with the original aspect ratio intact. Horizontal
  • Samsung 460TS-3 | User Manual - Page 133
    the LCD Display Note If Horizontal is set to 15, the maximum value for Vertical is 6. Screen Position The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Position. • Select a display in Display Selection
  • Samsung 460TS-3 | User Manual - Page 134
    • On Horizontal Adjusting the LCD Display Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Time Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Set the time interval for performing the horizontal
  • Samsung 460TS-3 | User Manual - Page 135
    Adjusting the LCD Display Mode You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. • Off • On You can change the Safety Screen Type. • Bar • Eraser •
  • Samsung 460TS-3 | User Manual - Page 136
    Adjusting the LCD Display This function prevents after-images on the screen by moving long black and white vertical lines. Eraser Pixel This function prevents after-images on the screen by moving a rectangular pattern. This function prevents after-images by moving many pixels on the screen. Side
  • Samsung 460TS-3 | User Manual - Page 137
    LCD Display When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen
  • Samsung 460TS-3 | User Manual - Page 138
    OSD Rotation Adjusting the LCD Display OSD Rotate 1. Landscape 2. Portrait Advanced Settings Configures the settings more elaborately. Fan & Temperature Protects the product by detecting the fan speed and internal temperature. Fan Control Selects auto or manual for the fan speed settings. • Auto
  • Samsung 460TS-3 | User Manual - Page 139
    Control Adjusting the LCD Display Detects the product's internal temperature and specifies the desired temperature. The product is set to 77 °C by default. Note • The picture will be dimmed if the temperature exceeds the specified temperature, and the product will automatically power off to
  • Samsung 460TS-3 | User Manual - Page 140
    Adjusting the LCD Display Note When Auto Power is On, the product will power on automatically as soon as it is connected to power. Button Lock Locks or unlocks the monitor control buttons on the product. • Off • On User Auto Color 1. Auto Color Automatically adjusts the Colors. 2. Reset Resets the
  • Samsung 460TS-3 | User Manual - Page 141
    connected. Note • Enabled only in PC, DVI, HDMI, or DP(DisplayPort) mode. • Auto will be disabled in HDMI mode. Lamp Schedule Adjusts the luminance to a user-specified value at a specified time. OSD Display Displays or hides a menu item on the screen. Source OSD • Off • On
  • Samsung 460TS-3 | User Manual - Page 142
    the LCD Display • Off • On No Signal OSD • Off • On MDC OSD • Off • On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an SW code. The image below will appear on the screen of
  • Samsung 460TS-3 | User Manual - Page 143
    Adjusting the LCD Display Note When there are two or more BMP images, they are displayed on the screen using a slideshow. • It is recommended values used for both the PC and TV are only supported if the Edit Name is set to PC or DVI PC. • This is only supported if the Size is set to 16:9. Setup Reset
  • Samsung 460TS-3 | User Manual - Page 144
    Adjusting the LCD Display Reset all the settings for the display. Multi Control Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MDC via an RJ45 MDC cable. • Network Setting • IP Setting : Manual, Auto • IP Address : Manually enter the IP Address if IP Setting is set to
  • Samsung 460TS-3 | User Manual - Page 145
    used by an USB device (ex: video display). Otherwise, the Program (MagicInfo) may stop. • To access other sources, press the SOURCE button in MagicInfo. • The preset password for the LCD Display is "000000". • The server Program's Power-On option works only if the LCD Display's power is completely
  • Samsung 460TS-3 | User Manual - Page 146
    It is highly recommended not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • To save Setup contents
  • Samsung 460TS-3 | User Manual - Page 147
    Adjusting the LCD Display In step 2 of MagicInfo Setup Wizard, you don't have to go to step 3 When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device. 5. Setup Information
  • Samsung 460TS-3 | User Manual - Page 148
    Adjusting the LCD Display Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear.
  • Samsung 460TS-3 | User Manual - Page 149
    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back
  • Samsung 460TS-3 | User Manual - Page 150
    with the computer or the video card, this can cause the LCD Display to become blank, have poor Coloring, become noisy, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer. 1. Check if the power cord and the video cables are properly connected to
  • Samsung 460TS-3 | User Manual - Page 151
    Troubleshooting (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and the LCD Display (video extension
  • Samsung 460TS-3 | User Manual - Page 152
    made in the settings to the OSD memory. Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds. A: The LCD Display is using its power management system. Press any key on the keyboard. Problems related to Audio Note Problems related to audio signals and their solutions are
  • Samsung 460TS-3 | User Manual - Page 153
    Windows ME/2000: Control Panel → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: How can I clean the outer case/LCD Panel? A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning
  • Samsung 460TS-3 | User Manual - Page 154
    General General Model Name 400TS-3, 460TS-3 LCD Panel Size Display Area 400TS-3 460TS-3 400TS-3 460TS-3 40.0 inch / 101 cm 46.0 inch / 116 cm 885.6(H) mm x 498.15(V) mm 1018.08(H) mm x 572.67(V) mm Synchronization Horizontal Vertical 30 ~ 81 kHz 56 ~ 85 Hz Display Color 16.7M (true
  • Samsung 460TS-3 | User Manual - Page 155
    equipment for industrial use) Attention dealers and users. This device is registered for EMC requirements for industrial use (Class A) and can be used in areas other than general households. PowerSaver This LCD Display has a built-in power management system called PowerSaver. This system saves
  • Samsung 460TS-3 | User Manual - Page 156
    the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 640 x 350 Horizontal Frequency (kHz) 31
  • Samsung 460TS-3 | User Manual - Page 157
    68.681 37.861 37.500 35.156 37.879 48.077 46.875 31.020 48.363 56.476 60.023 67.500 47 number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user
  • Samsung 460TS-3 | User Manual - Page 158
    pixels could be seen. This is not from bad quality and you can use it without any problems. • For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800. When cleaning the monitor and the panel outside, please apply a small amount of water to a soft cloth. Rub softly when
  • Samsung 460TS-3 | User Manual - Page 159
    off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one Color or a moving image is rec- ommended. • The Image Retention Free function applied to the product is recommended. - For detailed
  • Samsung 460TS-3 | User Manual - Page 160
    the images and logo cycle periodically. - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use. • The best way to protect your monitor from Image retention is to turn the Power off, or set your PC or System to operate a Screen Saver Program when you are not using it. If
  • Samsung 460TS-3 | User Manual - Page 161
    Information • Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display
  • Samsung 460TS-3 | User Manual - Page 162
    or comments relating to Samsung products, please contact the SAMSUNG customer care Center. U.S.A CANADA MEXICO North America 1-800-SAMSUNG (726-7864) http://www.samsung.com 1-800-SAMSUNG (726-7864) http://www.samsung.com 01-800-SAMSUNG (726-7864) http://www.samsung.com ARGENTINA BRAZIL Latin
  • Samsung 460TS-3 | User Manual - Page 163
    AZERBAIJAN BELARUS GEORGIA 0700 SAMSUNG (0700 726 http://www.samsung.com 7864) 0800 - SAMSUNG (726-7864) http://www.samsung.com 902 - 1 - SAMSUNG (902 172 http://www.samsung.com 678) 0771 726 7864 (SAMSUNG) http://www.samsung.com 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08
  • Samsung 460TS-3 | User Manual - Page 164
    NEW ZEALAND CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE TAIWAN THAILAND VIETNAM Asia Pacific 1300 362 603 http://www.samsung.com 0800 SAMSUNG (0800 726 http://www.samsung.com 786) 400-810-5858 http://www.samsung.com 010-6475 1880 (852) 3698 - 4698 http://www
  • Samsung 460TS-3 | User Manual - Page 165
    This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. Resolution The number of horizontal and vertical dots used to
  • Samsung 460TS-3 | User Manual - Page 166
    rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Authority Information in this document is subject to change without notice. © 2010 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in
  • Samsung 460TS-3 | User Manual - Page 167
    Appendix TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
SyncMaster 400TS-3, 460TS-3
LCD Display
User Manuals
The c
olor
and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.