Samsung HC-P4363W Quick Guide (easy Manual) (English)

Samsung HC-P4363W Manual

Get Samsung HC-P4363W PDF manuals and user guides View all Samsung HC-P4363W manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung HC-P4363W manual content summary:

  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 1
    . 1 Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adaptor into the "ANT 1 IN" terminal on the rear panel. Antennas with 75-ohm Round Leads Plug the antenna lead into the "ANT 1 IN" terminal on
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 2
    to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box If you want to connect cable, and you do not need to use a cable box: Plug the incoming cable into the "ANT 1 IN" terminal on the rear panel. Cable
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 3
    (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF RF (A/B) switch and the "ANT 1 IN" terminal on the rear panel. After you've made this connection, set the A/B switch "B," you will need to tune your TV to the cable box's output channel, which is usually
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 4
    OUT jack on the VCR. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. • Also, you can connect to "AV 3" on the side panel of TV. Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 5
    "COMPONENT IN 1 (Y, PB, PR)" (or "COMPONENT IN 2 (Y, PB, PR)") jacks on the TV and the VIDEO OUT (Y, PB, PR) jacks on the DVD player. For an explanation of Component video, see your DVD player's owner's instruction. Connecting to Regular Audio and Video Jacks 1 Connect a set of audio cables between
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 6
    INSTALLATION Connecting a Digital TV Set-Top Box The rear panel jacks on your TV make it easy to connect a Set-Top Box to your TV. Connecting to Y, PB, IN 1 (Y, PB, PR)" (or "COMPONENT IN 2 (Y, PB, PR)") jacks on the TV and the VIDEO OUT (Y, PB, PR) jacks on the Set-Top Box. The connections for a
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 7
    -definition picture source to the DIGITAL INPUT jack on the TV, high-definition pictures can "DVI IN (AUDIO-L, R)" jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. 2 Connect " jacks on the TV and the HDMI OUT jacks on the SetTop Box. Please check that the HDMI source is powered on. If not,
  • Samsung HC-P4363W | Quick Guide (easy Manual) (English) - Page 8
    local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting to the Digital Audio Input The rear panel jacks on your TV make it easy to connect a device with digital audio output. After making a connection, set the audio input by reference to page 51
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Connecting VHF and UHF Antennas
I
NSTALLATION
Chapter Two
1
Place the wires from the twin
leads under the screws on the
300-75 ohm adaptor (not
supplied). Use a screwdriver
to tighten the screws.
2
Plug the adaptor into the
“
ANT
1 IN
”
terminal on the rear
panel.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or
“
rabbit ears
”
) that has 300-ohm
twin flat leads, follow the directions below.
Plug the antenna lead into the
“
ANT 1 IN
”
terminal on the
rear panel.
Antennas with 75-ohm Round Leads
1
Connect both antenna leads to the combiner.
2
Plug the combiner into the
“
ANT 1 IN
”
terminal on the rear
panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires an
optional combiner-adaptor (available at most electronics shops).