Samsung YP-N30 Quick Guide (easy Manual) (English)

Connecting the USB cable

USB connect cable

1

Plug one end of the USB cable into the USB port

on the PC.

2

Insert the battery into the yepp and turn on the

power.

3

Slide down the bottom cover of the player.

Plug the other end of the USB cable

into the USB port on the right side at the bottom.

●

If you disconnect the USB cable from your PC while

implementing a command or initializing during USB driver

installation, your PC may not function correctly.

4

USB driver is installed with a message saying that

it is searching for a new device. You may not see

the display screen during installation. Go to the

device manager to check that installation has

been successfully completed.

5

When USB driver is installed, "

SAMSUNG YP-

N30

” will appear in

[System Properties]

[Device Manager]

Before connecting yepp to PC, make sure to install USB driver.

Location of Controls

Earphone Jack

Microphone

Neck strap Hook

Display

Voice Recording Button

MENU/Loop Repeating Button

Hold Switch

USB Cable Connection Port

Volume

Play/Stop/Pause/Forward/Backward

Button

Playing Music

Stopping Music

When you press the

button, the yepp logo appears and a music/voice file is played.

When you press the

button while playing, the music stops. If no buttons are pressed

within 5 seconds (changes depending on settings), the yepp automatically powers off.